Tools for Musical Instruments

5/ 5

<p>Enables you to easily rotate the machine 180° and lock it with complete stability. It makes it easy to alternate between sharpening/honing or sharpening towards or away from the edge. Fits all models.</p> <p></p>

032.409

5/ 5

<p>Sharpens all makes and shapes of profile knifes. Also for profiled paint removal blades suitable for Tormek T-8, T-7, T-4, T-3 and old series models.</p> <p>For profile knifes with 24, 30 or 38 mm distance between guide holes. Not suitable for knives without guide holes.</p> <p></p>

032.408

5/ 5

<p>Belgian Coticule Whetstones</p> <p>The quarrying of Belgian whetstones in the Ardennes is first mentioned in a Roman document. But the story of these natural honing stones goes further back than that. The approx. 480 million-year-old grey yellow sedimentary stones, originating from volcanic ash, are composed of very fine garnet crystals. During honing, these are released from the matrix and, in combination with water and abrasion debris, make a honing paste. The garnets only remove fine shavings from the metal and ensure a good polish. Unique combination of quick abrasive action and grain size.</p> <p>Interesting fact: To produce 1 kg of sharpening stones approx. 1500 kg of cliff must be removed. The thin yellow slices are glued to a slate base and cut to size.</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p></p> <p>Grit 6000-8000</p> <p>Dimensions 150 x 40 x 20 mm</p> <p></p>

032.405

5/ 5

<p>Belgian Coticule Whetstones</p> <p>The quarrying of Belgian whetstones in the Ardennes is first mentioned in a Roman document. But the story of these natural honing stones goes further back than that. The approx. 480 million-year-old grey yellow sedimentary stones, originating from volcanic ash, are composed of very fine garnet crystals. During honing, these are released from the matrix and, in combination with water and abrasion debris, make a honing paste. The garnets only remove fine shavings from the metal and ensure a good polish. Unique combination of quick abrasive action and grain size.</p> <p>Interesting fact: To produce 1 kg of sharpening stones approx. 1500 kg of cliff must be removed. The thin yellow slices are glued to a slate base and cut to size.</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p></p> <p>Grit 6000-8000</p> <p>Dimensions 75 x 30 x 20 mm</p> <p></p>

032.404

5/ 5

<p>Belgian Coticule Whetstones</p> <p>The quarrying of Belgian coticules in the Ardennes is first mentioned in a Roman document. But the story of these natural honing stones goes further back than that. The approx. 480 million-year-old grey yellow sedimentary stones, originating from volcanic ash, are composed of very fine garnet crystals. During honing, these are released from the matrix and, in combination with water and abrasion debris, make a honing paste. The garnets only remove fine shavings from the metal and ensure a good polish. Unique combination of quick abrasive action and grain size.</p> <p>Interesting fact: To produce 1 kg of sharpening stones, approx. 1500 kg of solid rock must be removed. The thin yellow slices are glued to a slate base and cut to size.</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p></p> <p>Dimensions 75 x 3-7 mm</p> <p></p>

032.403

5/ 5

<p>Belgian Coticule Whetstones</p> <p>The quarrying of Belgian whetstones in the Ardennes is first mentioned in a Roman document. But the story of these natural honing stones goes further back than that. The approx. 480 million-year-old grey yellow sedimentary stones, originating from volcanic ash, are composed of very fine garnet crystals. During honing, these are released from the matrix and, in combination with water and abrasion debris, make a honing paste. The garnets only remove fine shavings from the metal and ensure a good polish. Unique combination of quick abrasive action and grain size.</p> <p>Interesting fact: To produce 1 kg of sharpening stones approx. 1500 kg of cliff must be removed. The thin yellow slices are glued to a slate base and cut to size.</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p></p> <p>Grit 6000-8000</p> <p>Dimensions 33-39 cm²</p> <p></p>

032.402

5/ 5

<p>This sharpener kit was made by DMT specially for woodturners and sculptors. It consists of two diamond-sharpening cones Ø 9.5-19.3 mm and Ø 19.3-31.8 mm as well as a cone file Ø 3.3-9.5 mm for interior rounding. In addition, it also includes a Dia Sharp sharpening card for exterior rounding and narrow in-between spaces. Comes with a practical nylon sheath with a hanging loop.</p> <p>DMT Diamond Stones</p> <p>The American manufacturer Diamond Machining Technology (DMT) is the founder of interrupted surface technology for diamond sharpening stones, and has been the market leader for diamond-coated sharpening equipment for years. The high-quality sharpening tools are manufactured at the company's headquarters in Massachusetts (USA).</p> <p>Monocrystalline* diamond particles guarantee a long service life and excellent material removal</p> <p>Uniform grit sizes and a dense diamond distribution for even grinding patterns</p> <p>Round recesses prevent clogging due to grinding debris</p> <p>Permanently flat and warp-free thanks to supporting plates made of steel or warp-free plastic with a nickel matrix</p> <p>Colour coding of various grit sizes</p> <p>100 % made in the USA</p> <p>Monocrystalline* diamond-coated sharpening devices:</p> <p>Diamond-coated sharpening devices remain permanently flat, and are especially suitable for tools with straight blades, as well as for producing flat surfaces (e.g. backs of plane and chisel blades, plane soles, scrapers). Also suitable for carbide coated cutters, tool steels, HSS and non-metal materials (glass, ceramic, etc.). We recommend moistening diamond-coated sharpening devices with water and grinding with little pressure.</p> <p>* Monocrystalline diamonds are significantly more wear resistant than the polycrystalline diamonds used to make lower quality diamond sharpening tools.</p> <p></p>

032.401

5/ 5

<p>Traditional Japanese honing stone manufactured in a small batch series. It hardly clogs, features a noticeable abrasive action and yet a high polishing effect. Because of its hard bond, the stone does not wear quickly. Thanks to its large surface, it is also suitable for wide plane blades and large knives. Suited for low-alloy carbon steels but also for high-alloy tool steels. Before use, soak the stone in water for approx. 10 minutes. It can also be stored in water permanently.</p> <p>Grit 8000</p> <p>Dimensions 205 x 73 x 24 mm</p> <p></p>

032.399

5/ 5

<p>In addition to stropping, regularly used straight razors should be honed on a sharpening stone every two months. For this purpose, this set contains two King sharpening stones 800 grit and 1200 grit, as well as a King 8000-grit honing stone. The stones rest securely on the Non-skid mat and can be conveniently trued on the trueing grille. The wide hanging strop and the Thiers-Issard sharpening paste No. 709019 are ideal for daily stropping</p> <p></p>

032.398

5/ 5

<p>This set contains a Kunsuto 220 grit shaping stone for repairing nicks and a Kunsuto 1000/6000 grit combination stone for sharpening and honing. Use the trueing grille for trueing the stones, the non-skid mat keeps the stones in place. Also included is a Togeru sharpening device, which helps maintain the correct angle when sharpening knives.</p> <p></p>

032.388

5/ 5

<p>Ideal combination for sharpening knives and cutting-tool edges. Grits 800, 2000 and 5000.</p> <p>Super Stone by Naniwa</p> <p>This sharpening stone series is particularly suitable for the final polishing of knife blades. The stones provide a high polishing effect and stay flat for a long time, even though it feels as comfortable as working on soft natural stones. Those series are ideal for sharpening extremely hard low-alloy carbon steels(White and Blue Paper Steel). Before use, soak the stone for at least 10 minutes. Do not keep it in water permanently. White aluminium oxideabrasive.</p> <p>Grit 800, 2000, 5000</p> <p>Dimensions 210 x 70 x 20 mm</p>

032.387

5/ 5

<p>Set of grits 800, 2000 and 5000. Ideal combination for knife and tool edges.</p> <p>With this series of stones, material can be removed more quickly thanks to the extremely high density of abrasive grains. Due to the hard magnesium bond, the stone also remains flat for a very long time - it is therefore ideally suited for kitchen knives and razors and all low-alloy carbon steels with high hardness (white and blue paper steel).</p> <p>Due to this bond, the stone reacts more sensitively to long-term exposure to water - therefore only water for a maximum of 5 minutes before use!</p> <p></p> <p>Grit 800, 2000, 5000</p> <p>Dimensions 210 x 70 x 20 mm</p> <p></p>

032.386

5/ 5

<p>This set consists of sharpening stones with grits 600, 1000 and 3000.</p> <p>Set consists of grits 600, 1000 and 3000. It is ideal for sharpening cutting tool edges.</p> <p>Kunsuto sharpening stones</p> <p>This stone series was developed in cooperation with a Japanese sharpening stone expert. The aim was to create a Japanese stone series suitable for both high-alloy tool steels and low-alloy carbon steels. The numerous tests were supported by microscopic images of the cutting edges after sharpening. This stone series has a medium-hard bond, which does not wear out quickly even with tool steels made of alloy components with a coarse grain structure (e.g. chromium and vanadium). However, both steel types allow good material removal with a pleasant ease of use. The microscopic images show a harmonious surface and a precise cutting edge form for both types of steel.</p> <p>Before use, soak the stone for at least 10 minutes. Do not keep it in water permanently.</p> <p></p> <p>Grit 600, 1000, 3000</p> <p>Dimensions 205 x 78 x 25 mm</p> <p></p>

032.385

5/ 5

<p>"Grit 220, grit 1000 and grit 3000 as a set.</p> <p>Goken Stone by Naniwa</p> <p>This stone has a relatively hard bond. It is particularly suitable for high-alloy steels but also for low-alloy carbon steels. The coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly. The stones should be soaked in water for at least 10 minutes before use, but must not be stored in water permanently.</p> <p></p>

032.375

5/ 5

<p>This sharpening stone series is suitable for extremely hard cutting steels or sharpening tasks that require an absolutely flat sharpening stone.</p> <p>Sharpening of PM steels with a hardness of around 65 HRC</p> <p>Sharpening of ceramic knife blades</p> <p>Sharpening of razors</p> <p>Sharpening the back of hairdressing scissors</p> <p>The abrasive surface consists of bonded industrial diamonds and will therefore not show signs of wear, even when used frequently. Regular dressing and wetting as with waterstones is not necessary. Simply moisten with water and get started. Comes with cleaning stone.</p> <p>Grit 400</p> <p>Dimensions 210 x 75 x 16 mm</p> <p></p>

032.374

5/ 5

<p>Rounded edges on both sides.</p> <p>Dual Stone by Suehiro</p> <p>A new development, which will primarily appeal to sculptors, is the new Dual Stone series from Suehiro. The extremely hard abrasive grains have a relatively hard, non-porous bond. The main advantage of this series is that you can sharpen with water or oil, whichever you prefer, so the series can be optimally complemented with Arkansas stones. You should rub the stones with water or oil before use and store them in a dry place. Because of the non-porous bond, the grits must be rated much finer.</p> <p>Dimensions 115 x 38 x 9 mm"</p>

032.371

5/ 5

<p>"For sharpening and finishing.</p> <p>With two different grits. Comes with Nagura stone. For sharpening and finishing.</p> <p>Cerax by Suehiro</p> <p>Cerax is the best-known brand of the Suehiro company. The stones sold under this name have a medium-hard bond and are particularly suitable for high-alloy tool steels but also for low-alloy carbon steels. The coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly. The stone with the base has extra stability and is easy to store. A Nagura stone is used for cleaning and unclogging the surface of the stone and for creating a fine polishing paste. Before use, soak the stones in water for at least 10 minutes, but do not store them in water permanently. White aluminium oxideabrasive.</p> <p>Grit 1000/6000</p> <p>Dimensions 183 x 63 x 32 mm</p> <p>Base with base</p> <p></p>

032.370

5/ 5

<p>For sharpening and finishing.</p> <p>With two different grits. Comes with Nagura stone. For sharpening and finishing.</p> <p>Cerax by Suehiro</p> <p>Cerax is the best-known brand of the Suehiro company. The stones sold under this name have a medium-hard bond and are particularly suitable for high-alloy tool steels but also for low-alloy carbon steels. The coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly. The stone with the base has extra stability and is easy to store. A Nagura stone is used for cleaning and unclogging the surface of the stone and for creating a fine polishing paste. Before use, soak the stones in water for at least 10 minutes, but do not store them in water permanently. White aluminium oxideabrasive.</p> <p>Grit 1000/6000</p> <p>Dimensions 183 x 63 x 32 mm</p> <p>Base without base</p> <p></p>

032.369

5/ 5

<p>Bench stone</p> <p>A very fine grit sediment stone from the Kyoto region. Perfect for removing burr and polishing hand-forged plane blades, chisels and knife blades made of carbon steel. Ground flat on one side.</p> <p>Grit 10 000-15 000</p> <p>Dimensions 175 x 60 x 10 mm</p> <p></p>

032.361

5/ 5

<p>A very fine polishing paste developed for use with polishing wheel on the Sorby ProEdge. This polish can be mixed with water to make a paste and used as a cleaning and polishing agent. 100 x 35 x 20 mm</p> <p></p>

032.359

5/ 5

<p>For straight shear blades, hedge shears or plane blades. The jaws can be finely adjusted to the respective blade thickness. The separate guide plate can also be used as a grinding table. Total clamping length 115 mm, max. blade thickness 8 mm. Suitable for sharpening machines with guide rod diameter 12 mm.</p> <p></p>

032.358

5/ 5

<p>For de-burring the mirror side of chisels after sharpening. Self-adhesive. Fits No. 740830.</p> <p>M. Power Tools DC Diamond Stones</p> <p>Diamond Cross (DC) sharpening stones offer an excellent price/performance ratio with a high manufacturing quality. The lapping of the supporting plates and the stringent quality controls are performed at the company's headquarters in England.</p> <p>Monocrystalline* diamond particles guarantee a long service life and excellent material removal</p> <p>Uniform grit sizes and a dense diamond distribution for even grinding patterns</p> <p>Cross-shaped recesses prevent clogging due to grinding debris</p> <p>Permanently flat and warp-free thanks to specially lapped supporting plates made of steel with a stainless steel matrix</p> <p>3 year warranty for material and manufacturing defects! (damage from improper use is not covered by this warranty)</p> <p>Monocrystalline* diamond-coated sharpening devices:</p> <p>Diamond-coated sharpening devices remain permanently flat, and are especially suitable for tools with straight blades, as well as for producing flat surfaces (e.g. backs of plane and chisel blades, plane soles, scrapers). Also suitable for carbide coated cutters, tool steels, HSS and non-metal materials (glass, ceramic, etc.). We recommend moistening diamond-coated sharpening devices with water and grinding with little pressure.</p> <p>* Monocrystalline diamonds are significantly more wear resistant than the polycrystalline diamonds used to make lower quality diamond sharpening tools.</p> <p>Grit:  extra-fine</p> <p></p>

032.357

5/ 5

<p>This sharpening system allows the sharpening of bevels of 25° and 30° on one side and 27° and 32° on the opposite side, thus allowing the grinding of a micro bevel. Suitable for plane blades and chisels, without requiring time-consuming adjustments. The dry grinding system means it can be used irrespective of environmental conditions. Hence, it is ideal for use on construction sites and anywhere where quick results are needed without requiring maximum sharpness.</p> <p>Insertion of the magnetically attached diamond stone with corresponding grit</p> <p>Insertion of slide with alignment for 25° and 30° bevel angles or 27°and 32° bevel angles</p> <p>Insertion of plane blade/chisel and fixing in place at stop against counter-pressure</p> <p>Grinding of bevel angle by moving the slide</p> <p>Where necessary, removal of the burr on the back of the blade</p> <p></p> <p>Tool support and slide are made of solid milled and anodised aluminium with dovetail guide and wear-resistant nylon slide rail.</p> <p>M. Power Tools DC Diamond Stones</p> <p>Diamond Cross (DC) sharpening stones offer an excellent price/performance ratio with a high manufacturing quality. The lapping of the supporting plates and the stringent quality controls are performed at the company's headquarters in England.</p> <p>Monocrystalline* diamond particles guarantee a long service life and excellent material removal</p> <p>Uniform grit sizes and a dense diamond distribution for even grinding patterns</p> <p>Cross-shaped recesses prevent clogging due to grinding debris</p> <p>Permanently flat and warp-free thanks to specially lapped supporting plates made of steel with a stainless steel matrix</p> <p>Monocrystalline* diamond-coated sharpening devices:</p> <p>Diamond-coated sharpening devices remain permanently flat, and are especially suitable for tools with straight blades, as well as for producing flat surfaces (e.g. backs of plane and chisel blades, plane soles, scrapers). Also suitable for carbide coated cutters, tool steels, HSS and non-metal materials (glass, ceramic, etc.). We recommend moistening diamond-coated sharpening devices with water and grinding with little pressure.</p> <p>* Monocrystalline diamonds are significantly more wear resistant than the polycrystalline diamonds used to make lesser quality diamond sharpening tools.</p> <p>Scope of delivery</p> <p></p> <p>Fasttrack MK2 sharpening system, 1 x diamond stone medium-coarse, 1 x diamond stone medium-fine, cleaning block, removable fence, non-slip mat.</p> <p> </p> <p>Max. blade width 64 mm</p> <p></p>

032.352

5/ 5

<p>Fits models 1200 - 1206 and T-3 and T-4.</p> <p>Ø 145 mm</p> <p>Model LA-145</p> <p>Width 26 mm</p> <p></p>

032.351

5/ 5

<p>Suitable for Tormek T-3, T-4 and old series models.</p> <p></p>

032.350

5/ 5

<p>Short jig, axe jig, knife jig, small knife holder, long slender knives jig, scissors jig. Comes in practical plastic box with hard foam inlay.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8</p> <p></p>

032.347

5/ 5

<p>Fits models 2000-2006, T-7, and T-8.</p> <p>The composite honing wheel has an integrated polishing agent and is easy to handle. An advantage over the leather honing wheel is that the composite wheel can be used in clean environments and no honing paste has to be applied.</p> <p>Fits models 2000-2006, T-7, and T-8.</p> <p>Ø 220 mm</p> <p>Model CW-220</p> <p>Width 31 mm</p> <p></p>

032.344

5/ 5

<p>For cleaning diamond grinding wheels and protecting them against corrosion if not used for a long time. 2 x 150 ml.</p> <p></p>

032.343

5/ 5

<p>For cleaning the water container of the Tormek T-8 Original.</p> <p></p>

032.342

5/ 5

<p>Universal jig for turning tools and carving gouges with straight and curved cutting edges and for skew and straight chisels.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p></p>

032.340

5/ 5

<p>For adjusting bevel angles of turning tools and chisels, independently of wheel diameter. Used in combination with jigs (SVD-186 R and SVS-50).</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p></p>

032.339

5/ 5

<p>Attachment to adapt the Tormek bench grinder mounting kit BGM-100 directly to a Wolverine V-arm. It allows to use any Tormek honing guide on double-wheeled grinders with the Wolverine system.</p> <p></p>

032.338

5/ 5

<p>The long bent form is used in curved recesses to allow you to cut out of the piece from the deepest point without damaging the edges of recess.</p> <p></p> <p>With over 700 forms and sweeps, Pfeil offers the largest and most variable product range. The products of the world’s leading manufacture of fine carving tools are made from specially alloyed, hard tool steel, forged and ground on precision machines, heat-treated in an electric furnace. The blades are uniformly hardened to 59-61 HRC along their entire length, the break-proof oiled ash handles are mounted with inner ferrules. Only indigenous woods and solvent-free oils are used.</p> <p></p> <p>Overall length +/- 250 mm</p> <p>Blade length +/- 120 mm</p> <p></p>

021.200

5/ 5

<p>Including screw terminal with a span width of 62 mm to be attached to workbenches or table tops.</p> <p>Precision optics with 3 dioptres (1.75x magnification), real glass lense, adjustable LED light and lens cover. Additional hinge allows the lamp head with 125 mm optical glass and 90 LEDs to be pivoted independently of the gooseneck position. This ensures optimum illumination of the work area and prevents shadows from forming. Durable LED technology, 8-watt power supply for energy saving, 230 V.</p> <p></p>

032.335

5/ 5

<p>This compact diamond truer is used for trueing, cleaning and dressing silicon carbide and aluminium oxidegrinding wheels of double-wheeled grinders. You simply place the tool on the tool rest and press it against the grinding wheel. The textured handle ensures a secure grip. Coated area 40 x 10 mm.</p> <p></p>

032.334

5/ 5

<p>Support table for sharpening flat cutting edges such as flat chisels and scraper blades, parting tools and inshaves. The 107 x 88 mm support enables a wide range of tools to be guided safely. Suitable for sharpening machines with guide rod diameter 12 mm.</p> <p></p>

032.333

5/ 5

<p>For short carving blades, hollow gouges and V-parting tools or small woodturning gouges A plastic cap on the pressure screw avoids pressure marks on the tools. Clamping width max. 36 mm.</p> <p></p>

032.332

5/ 5

<p>Thanks to the high speeds of polishing motors, fibres of the polishing discs and polishing paste are spun away. The sheet steel housing with folding splash guard prevents contamination on workbenches or walls. A must for work outside workshops, e.g. on kitchen tables or desks. Dimensions 360 x 150 x 200 mm. For mounting on mini polishing motors </p> <p></p>

032.331

5/ 5

<p>For sharpening knife blades from 100 mm blade length. Wide clamping jaws allow the blade to be held securely and an adjustment screw allows the stop to be set.</p> <p></p>

032.330

5/ 5

<p>Machine including three waterstones (grits 280, 1000 and 6000).</p> <p>Shinko Sharpening Machine</p> <p>The Shinko sharpening system enables the achievement of professional sharpening results. Clogging rarely occurs with the open-pored Japanese waterstones. Water cooling and plane-honing produces long-lasting and strong edges. Because no heat is generated, the blade can be held very close to its edge and guided very accurately. No sparks are produced, allowing the device to be safely operated in workshops and instructional settings. The stone surrounding foam ring is easily pressed down when sharpening long blades.</p> <p>Sharpening wheel:</p> <p>Japanese waterstone, grit 1000, Ø 180 x Ø 70 mm, thickness 20 mm, steel mount, wheel nut, splashguard.</p> <p>Motor: 220 V, 125 W, 50/60 Hz, 450 rpm gear-driven.</p> <p>Casing: Plastic, tool rest adjustable in height and angle. Water container with valve, drain tube.</p> <p>Overall weight approx. 5.5 kg.</p> <p></p>

032.327

5/ 5

<p>Maximum precision and solid zinc cast housing</p> <p>TORMEK T-8 Original takes precision and stability to a completely new level. The new design integrates the previously mounted sleeves for the vertical and horizontal support into the revolutionary fully cast top and frame. The enhanced stability optimizes jig guidance and thus the sharpening accuracy.</p> <p>The Tormek DC-250 Diamond Grinding Wheel with grit 360 achieves efficient removal and quickly repairs a blunt or damaged cutting edge. It is the ideal grinder for the turner and is particularly durable. The high quality of the diamond grinding surface ensures efficient, constant sharpening with a constant wheel diameter. With this set you also receive all relevant sharpening guides.</p> <p>Diamond grinding wheel ""Tormek DC-250"", grit 360, Ø 250 x 50 mm; leather honing wheel Ø 215 x 30 mm; universal support with fine adjustment (can be used horizontally or vertically). 230 V, 200 W, 90 rpm, torque 14.7 Nm, 14.8 kg.</p> <p>Includes:</p> <p>Square edge jig (SE-77)</p> <p>Adjustable trueing tool (TT-50) and stone grader (SP-650) for additional standard sharpening wheels (water stones)</p> <p>Anti-corrosion concentrate, 150 ml (ACC-150)</p> <p>Pro Angle Master (WM-200)</p> <p>Honing compound (PA-70)</p> <p>Handbook (HB-10)</p> <p>Instruction video (DVD-1)</p> <p>Woodturner's kit (TNT-808)</p> <p>Edge marker (EM-15)</p> <p>Comes with Tormek manual in German language.</p> <p>Tormek Sharpening System</p> <p>Proven for many years and constantly perfected wet working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.</p> <p>The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The offset front end can also be used for flat honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.</p> <p>A summary of the advantages of Tormek sharpening machines</p> <p>Longer working life of T-8 and T-4 Original:</p> <p>Stainless steel spindle with EzyLock-System for easier stone assembling</p> <p>Solid zinc cast housing with integrated vertical and horizontal support</p> <p>Better motor insulation</p> <p></p> <p>Additional advantages of T-8 Original:</p> <p>Electrophoretic dip painted casing, zinc cast housing frame and robust ABS plastic sides for better corrosion protection</p> <p>Silent running, maintenance free motor, designed for continuous operation, 25 000 hour life</p> <p>Improved water container with screw lift for easy positioning, overspill rim, drip-off plate, magnetic swarf collector and magnetic cleaning scraper</p> <p></p>

032.326

5/ 5

<p>Maximum precision and solid zinc cast housing</p> <p>The TORMEK T-8 Original takes precision and stability to a completely new level. The new design integrates the previously mounted sleeves for the vertical and horizontal support into the revolutionary fully cast top and frame. The enhanced stability optimises jig guidance and thus the sharpening accuracy.</p> <p>The Tormek DE-250 diamond grinding wheel with a grit size of 1200 provides a very fine grinding surface and is ideal for carving tools, knives, chisels or plane blades. Thanks to the additional grinding surface on the side, a straight bevel can be ground into the tool without hollow grinding. For sharpening on the side of the diamond grinding wheel, we recommend the Tormek Multi Base (MB-100) with the appropriate sharpening device for the respective tool.</p> <p>Sharpening wheel ""Tormek DE-250"", grit 1200, Ø 250 x 50 mm; leather honing wheel Ø 215 x 30 mm; universal support with fine adjustment (can be used horizontally or vertically). 230 V, 200 W, 90 rpm, torque 14.7 Nm, 14.8 kg.</p> <p>Includes:</p> <p>Square Edge Jig (SE-77)</p> <p>Adjustable Trueing Tool (TT-50) and Stone Grader (SP-650) for purchasing additional standard sharpening wheels (water stones)</p> <p>Anti-corrosion Concentrate, 150 ml (ACC-150)</p> <p>Pro Angle Master (WM-200)</p> <p>Honing Compound (PA-70)</p> <p>Handbook (HB-10)</p> <p>Instruction Video (DVD-1)</p> <p>Edge marker (EM-15)</p> <p>Comes with Tormek manual in German language.</p> <p>Tormek Sharpening System</p> <p>Proven for many years and constantly perfected wet working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.</p> <p>The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The offset front end can also be used for flat honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.</p> <p>A summary of the advantages of Tormek sharpening machines</p> <p>Longer working life of T-8 and T-4 Original:</p> <p>Stainless steel spindle with EzyLock-System for easier stone assembling</p> <p>Solid zinc cast housing with integrated vertical and horizontal support</p> <p>Better motor insulation</p> <p></p> <p>Additional advantages of T-8 Original:</p> <p>Electrophoretic dip painted casing, zinc cast housing frame and robust ABS plastic sides for better corrosion protection</p> <p>Silent running, maintenance free motor, designed for continuous operation, 25 000 hour life</p> <p>Improved water container with screw lift for easy positioning, overspill rim, drip-off plate, magnetic swarf collector and magnetic cleaning scraper</p> <p></p>

032.325

5/ 5

<p>Maximum precision and solid zinc cast housing</p> <p>TORMEK T-8 Original takes precision and stability to a completely new level. The new design integrates the previously mounted sleeves for the vertical and horizontal support into the revolutionary fully cast top and frame. The enhanced stability optimizes jig guidance and thus the sharpening accuracy.</p> <p>""Tormek Original"" sharpening stone (SG-250) aluminium oxideØ 250 x 50 mm, grit 220; leather honing wheel Ø 220 x 30 mm; universal support, finely adjustable (can be used horizontally or vertically). 230 V, 200 W, 90 rpm, torque 14.7 Nm, 14.8 kg.</p> <p>Includes:</p> <p>Hand Tool Kit HTK-806 with short jig, axe jig, knife jig, small knife holder, long knives jig, scissors jig</p> <p>Square edge precision jig (SE-77)</p> <p>Adjustable trueing tool (TT-50)</p> <p>Stone preparer (SP-650)</p> <p>Angle gauge (WM-200)</p> <p>Honing compound (PA-70)</p> <p>Handbook (HB-10)</p> <p>Instruction video (DVD-1)</p> <p>Workshop ""Sharpening on the Tormek""</p> <p>Edge marker (EM-15)</p> <p>Comes with Tormek manual in German language.</p> <p>Tormek Sharpening System</p> <p>Proven for many years and constantly perfected wet working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.</p> <p>The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The offset front end can also be used for flat honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.</p> <p>A summary of the advantages of Tormek sharpening machines</p> <p>Longer working life of T-8 and T-4 Original:</p> <p>Stainless steel spindle with EzyLock-System for easier stone assembling</p> <p>Solid zinc cast housing with integrated vertical and horizontal support</p> <p>Better motor insulation</p> <p></p> <p>Additional advantages of T-8 Original:</p> <p>Electrophoretic dip painted casing, zinc cast housing frame and robust ABS plastic sides for better corrosion protection</p> <p>Silent running, maintenance free motor, designed for continuous operation, 25 000 hour life</p> <p>Improved water container with screw lift for easy positioning, overspill rim, drip-off plate, magnetic swarf collector and magnetic cleaning scraper</p> <p></p>

032.324

5/ 5

<p>"Incl. Flexible Shaft and Handpiece.</p> <p>Compact polishing machine with double-sided motor shaft. Ideal for polishing small woodturned items, delicate objects, jewellery, etc. The shaft can be equipped on the left and/or right with optional accessories such as drill chucks, grinding rollers, grinding discs, circular brushes and various cleaning and polishing discs. The ideal tool for every application with a suitable, infinitely adjustable speed range (3000-8000 rpm). Entire machine housing made of robust die-cast aluminium. 400W, 230V.</p> <p>DICTUM Polishing and Grinding Machines</p> <p>No matter which material is to be processed and which surface quality is to be achieved, with DICTUM polishing and grinding machines and the corresponding accessories, you are equipped for all tasks. From precise coarse and fine grinding of tool blades to grinding and polishing flat, profiled and organically shaped surfaces. With the appropriate accessories as well as grinding and polishing agents you can process metals, wood-based materials, natural materials, plastics, etc. until you achieve the desired result.</p> <p>Scope of delivery</p> <p></p> <p>Holding arbor with clamping flange </p> <p>Felt polishing disc </p> <p>Flexible shaft, 92 cm </p> <p>Universal handpiece UH-4, incl. chuck key </p> <p></p> <p></p> <p>o. 728811)"</p>

032.323

5/ 5

<p>Compact polishing machine with double-sided motor shaft. Ideal for polishing small woodturned items, delicate objects, jewellery, etc. The shaft can be equipped on the left and/or right with optional accessories such as drill chucks, grinding rollers, grinding discs, circular brushes and various cleaning and polishing discs. The ideal tool for every application with a suitable, infinitely adjustable speed range (3000-8000 rpm). Entire machine housing made of robust die-cast aluminium. 400W, 230V.</p> <p>DICTUM Polishing and Grinding Machines</p> <p>No matter which material is to be processed and which surface quality is to be achieved, with DICTUM polishing and grinding machines and the corresponding accessories, you are equipped for all tasks. From precise coarse and fine grinding of tool blades to grinding and polishing flat, profiled and organically shaped surfaces. With the appropriate accessories as well as grinding and polishing agents you can process metals, wood-based materials, natural materials, plastics, etc. until you achieve the desired result.</p> <p>Scope of delivery</p> <p></p> <p>2 polishing disc holders, conical </p> <p>2 cotton polishing discs, triple stitched, 75 x 10 mm </p> <p></p>

032.322

5/ 5

<p>For fine work in making models and musical instruments, also suitable for deburring aluminium and plastic parts. Ideal for controlled removal of material in hard-to-reach areas, grinds in both directions. Sturdy die-cast aluminium handle, shoe with easy to remove and replaceable hardened steel grinding plate. Sand on a sample piece first. Surface of the sanding pad may leave black stains during first use (anti-corrosion coating). This is no sign of bad quality and only occurs during first contact with wood. Grit approx. 320.</p> <p>Width 50 mm</p> <p>Length 150 mm</p> <p>Model Sanding Shoe Rectangular, Broad</p>

024.223

5/ 5

<p>For fine work in making models and musical instruments, also suitable for deburring aluminium and plastic parts. Ideal for controlled removal of material in hard-to-reach areas, grinds in both directions. Sturdy die-cast aluminium handle, shoe with easy to remove and replaceable hardened steel grinding plate. Sand on a sample piece first. Surface of the sanding pad may leave black stains during first use (anti-corrosion coating). This is no sign of bad quality and only occurs during first contact with wood. Grit approx. 320.</p> <p>Width 24 mm</p> <p>Length 150 mm</p> <p>Model Sanding Shoe Rectangular, Slim</p>

024.222

5/ 5

<p>For fine work in making models and musical instruments, also suitable for deburring aluminium and plastic parts. Ideal for controlled removal of material in hard-to-reach areas, grinds in both directions. Sturdy die-cast aluminium handle, shoe with easy to remove and replaceable hardened steel grinding plate. Sand on a sample piece first. Surface of the sanding pad may leave black stains during first use (anti-corrosion coating). This is no sign of bad quality and only occurs during first contact with wood. Grit approx. 320.</p><p>Width 7-28 mm</p><p>Length 80 mm</p><p>Model Sanding Shoe Triangular, Pointed</p>

024.221

5/ 5

<p>Precision file set in which only the narrow rounded sides are machined. For grooves, e.g. to mark the saddle of the strings on nut and bridges of stringed instruments.</p> <p></p> <p>The set contains:</p> <p></p> <p>0.4mm</p> <p></p> <p>0.6mm</p> <p></p> <p>0.8mm</p> <p></p> <p>1mm</p>

024.240

5/ 5

<p>Double grinder with 3000 rpm for universal metalworking. Whether for grinding, sharpening, deburring or polishing metal components - equipped with the right grinding wheels, the high-speed machine does the job, from shaping to polishing. rinding wheels corundum and white aluminium oxide.</p> <p>Scope of delivery</p> <p></p> <p>Protective goggles</p> <p>Diamond dresser</p> <p>White aluminium oxidewheel 150 x 25 x 12.7 mm, grit 100</p> <p>Corundum wheel 150 x 25 x 12.7 mm, grit 60</p> <p>Spark protection left and right</p> <p>Protective washers with retaining bracket left and right</p> <p>Workpiece support left and right</p> <p>Tub</p> <p>Open-end spanner</p> <p></p> <p>Centre hole 12.7 mm</p> <p>Wheel diameter 150 mm</p> <p>No load speed 2850 1/min</p> <p>Rated input 370 W</p> <p>Motor 230 V / 50 Hz</p> <p>Wheel width 25 mm</p> <p>Weight 10 kg</p> <p>Dimensions 360 x 240 x 185 mm</p> <p></p>

032.319

5/ 5

<p>This Wax Polish protects plane soles made of steel and other flat surfaces from rust and at the same time reduces friction. Equally suited for cast iron, steel and iron. It also inhibits the tarnishing of polished copper, brass and bronze items. Apply Wax Polish sparingly with cloth, then polish</p> <p></p>

032.318

5/ 5

<p>Ballistol provides reliable rust protection, cleans and oils metals, impregnates and preserves leather and wood surfaces, and is even suitable for the disinfection of minor cuts. In the garden it can be used to treat tree cancer and to combat aphids (in a 3 % solution with water). Ballistol is based on pure medical white oil, spiked with natural plant products. It is thus ecologically-friendly and bio-degradable.</p> <p>Content 500 ml</p> <p>Container Storage container</p> <p></p>

032.317

5/ 5

<p>Ballistol provides reliable rust protection, cleans and oils metals, impregnates and preserves leather and wood surfaces, and is even suitable for the disinfection of minor cuts. In the garden it can be used to treat tree cancer and to combat aphids (in a 3 % solution with water). Ballistol is based on pure medical white oil, spiked with natural plant products. It is thus ecologically-friendly and bio-degradable.</p> <p>Content 50 ml</p> <p>Container Glass bottle</p> <p></p>

032.316

5/ 5

<p>Weicon AT-44 is an all-round spray without silicone, which maintains and protects all tools and machines. The 3-way spray valve allows to work in any position (even overhead). Thanks to its special formula and very low friction coefficient, it combines corrosion protection, cleaning, water displacement, lubrication and conservation in a single product.</p> <p>Loosens seized screw connections, bolts, fittings and valves</p> <p>Eliminates squeaky and creaky noises on hinges, guides and bearings</p> <p>Dispels moisture from electrical cables, prevents tracking currents</p> <p>Lubricates, maintains and cleans metal surfaces and mechanical parts</p> <p></p>

032.313

5/ 5

<p>The Rust Loosener and Contact Spray is indispensible for repairs, maintenance and servicing. Thanks to its excellent creeping capacity, the Rust Loosener and Contact Spray reaches even the smallest intermediate spaces. The 3-way spray valve makes it possible to work in any position (even overhead).</p> <p>Loosens rusted and stiff parts, screws, bolts, joints and hinges</p> <p>Protects against corrosion and oxidation</p> <p>Repels moisture and reduces electrical resistance in contacts</p> <p>Secures the function of mechanical parts and contacts</p> <p>Provides lubrication, cleans and cares for metal surfaces, mechanical parts and electrical systems</p> <p></p>

032.312

5/ 5

<p>Convert your standard Veritas Sharpening System II into a self-centring double jaw honing guide. Simply replace the standard clamping unit by the double jaw clamp and you're done! The double jaw honing device allows for the precise and easy sharpening of even the narrowest chisels, mortise chisels or plane blades while exactly maintaining an angle of 90°. Also suitable for short Japanese blades. Fits Veritas Sharpening System II and Camber Roller Assembly </p> <p>Max. blade width 38 mm</p> <p>Max. blade thickness 12 mm</p> <p></p>

032.306

5/ 5

<p>The wide roller preserves the surface of the stone and prevents tilting. Can be used as an angle jig with grinding machines which have a tool rest. Aluminium body with brass roller.</p> <p>Max. blade width 65 mm</p> <p>Max. blade thickness 10 mm</p> <p></p>

032.305

5/ 5

<p>Simply mix the non-acidic formulation with water and submerge your rusty tools. It will not attack wood, wooden materials and most synthetic substances. The formula is bio-degradable, 500 ml make up a solution of ten litres. After the initial rust has been removed, the tools are protected from further corrosion.</p> <p>Content 500 ml</p> <p></p>

032.304

5/ 5

<p>With this gel-like rust remover you can remove rust easily and quickly. Apply the undiluted gel on the surface with a kitchen sponge and simply rub off the rust. Can also be used for large surfaces. This gel does not stain wood and most synthetic substances. Bio-degradable.</p> <p>Content 250 ml</p> <p></p>

032.298

5/ 5

<p>Delivery without content.</p> <p>250 ccm.</p> <p></p>

032.297

5/ 5

<p>4, 5, 6, 8, 10 mm</p> <p>Comes in blister packing</p> <p></p> <p>It’s a nice surprise to find that even branded twist drill bits can be highly affordable. The FISCH brand from Austria is a case in point. These drill bits made of tool steel have a centring point and cutting edges with spur-like functionality. They are suitable for soft woods such as pine and spruce. The recommended rpm is 1000 to 3000 rpm, with the speed decreasing as the drill bit diameter increases. The drill bits are suitable for all drilling jobs provided you do not expect perfectly machined bore hole edges. If your standards are higher in this respect, there is no alternative to twist drill bits with pronounced spur cutters.</p>

035.050

5/ 5

<p>This mount enables easier sharpening of short blades such as spokeshaves, reversing blades or small violin planes. Two magnets and a moveable fence hold the blades securely, the die-cast aluminium handle extends the blade and enables controlled sharpening, either by hand or with the Veritas sharpening system I. 102 x 38 x 10 mm.</p> <p></p>

032.296

5/ 5

<p>This smooth, impregnated packaging paper with anti-corrosion additives protects your tools from moisture, rust and verdigris. A waterproof PE coating on one side provides additional protection and ensures that the emitted VCIs (vapour corrosion inhibitors) reach the metal, where they prevent possible oxidising reactions. For directly packing metal parts and for lining storage containers. Depending on the additional packaging, protection lasts from 10 months to several years. For steel, iron and aluminium parts. Paper thickness 63 g/m², 800 x 600 mm.</p> <p></p>

032.295

5/ 5

<p>These strops can be used with or without paste to polish tool blades. If necessary, you can use finishing paste on the black (rougher) side; the fine brown side is usually used for stropping without paste. Can be held by the handle or screwed to a worktop through the two holes.</p> <p>Dimensions 415 x 75 x 18 mm</p> <p></p>

032.294

5/ 5

<p>Made by TWO CHERRIES in Remscheid, Germany</p> <p>Skew angle 45°</p> <p>Blade polished</p> <p>Hornbeam handle</p> <p>Total length 270 mm</p> <p>Delivered as pair only</p>

025.305

5/ 5

<p>Empty plastic bottle, for easy application of camellia oil. Refill bottle 100 ccm.</p> <p></p>

032.291

5/ 5

<p>Oil pot, including absorbent cotton, fitted with a wick. For protecting blades and for greasing when chiselling out mortises. Use with camellia oil (not included).</p> <p>Capacity 100 ml.</p> <p></p>

032.289

5/ 5

<p>This accessory guide with barrel-shaped roller allows for honing slight curves into plane blade edges whilst still maintaining an accurate and consistent bevel angle. Simply replace the standard roller assembly of the Veritas sharpening system II by this camber assembly and apply gentle pressure to the sides of the blade when sharpening. Slightly cambered plane blades are mainly used on smoothing planes to avoid planing marks made by projective corners and to produce an even grain. Not suitable for scrub plane blades. Fits Veritas Sharpening System II</p> <p></p>

032.288

5/ 5

<p>Set of Two Cherries Butt Chisels with polished blade.</p> <p>Contains 6mm / 12mm / 20mm / 26mm chisels</p>

025.304

5/ 5

<p>The blade is automatically centred within two grooved holding jaws that feature two blade-clamping positions. The three-point holding jaws also make it possible to clamp irregular shapes, such as a rabbet plane blade. Minimum blade width 3 mm.</p> <p>Max. blade width 63.5 mm</p> <p></p>

032.285

5/ 5

<p>Polishing emulsion with diamond particles for polishing or stropping knives and razors, as well as chisels or plane blades. Fits Jende Nanocloth acrylic strop block or leather honing strop block. To apply the emulsion, we recommend removing the pump cover, tipping the emulsion onto the strop block and spreading it evenly with a finger.</p> <p>Grit 0,5 Micron</p> <p></p>

032.280

5/ 5

<p>Polishing emulsion with diamond particles for polishing or stropping knives and razors, as well as chisels or plane blades. Fits Jende Nanocloth acrylic strop block or leather honing strop block. To apply the emulsion, we recommend removing the pump cover, tipping the emulsion onto the strop block and spreading it evenly with a finger.</p> <p>Grit 0,25 Micron</p> <p></p>

032.278

5/ 5

<p>Polishing emulsion with diamond particles for polishing or stropping knives and razors, as well as chisels or plane blades. Fits Jende Nanocloth acrylic strop block or leather honing strop block. To apply the emulsion, we recommend removing the pump cover, tipping the emulsion onto the strop block and spreading it evenly with a finger.</p> <p>Grit 4 Micron</p> <p></p>

032.276

5/ 5

<p>Polishing emulsion with diamond particles for polishing or stropping knives and razors, as well as chisels or plane blades. Fits Jende Nanocloth acrylic strop block or leather honing strop block. To apply the emulsion, we recommend removing the pump cover, tipping the emulsion onto the strop block and spreading it evenly with a finger.</p> <p>Grit 1 Micron</p> <p></p>

032.272

5/ 5

<p>Polishing emulsion with diamond particles for polishing or stropping knives and razors, as well as chisels or plane blades. Fits Jende Nanocloth acrylic strop block or leather honing strop block. To apply the emulsion, we recommend removing the pump cover, tipping the emulsion onto the strop block and spreading it evenly with a finger.</p> <p>Grit 2 Micron</p> <p></p>

032.270

5/ 5

<p>Also called a Fore plane is perfect for jointing edges, flattening and smoothing large or wide surfaces such as table tops, panels and workbench tops.</p> <p></p> <p>Features Summary</p> <p></p> <p>Body material: Iron</p> <p>Blade steel: T10</p> <p>Hardness of blade: 59-63</p> <p>Material of lever cap: Stainless steel or bronze</p> <p>Handles: Bubinga</p> <p>Cutting edge: Honed to 25 degrees</p> <p>Angle of blade to sole: 45 degrees</p> <p>Weight: 4 kgs</p> <p>Size: 440mm L * 70mm W * 145mm H</p>

023.105

5/ 5

<p>This finely crafted bronze cast block plane, also known as an apron plane, is designed for general purpose smoothing and shaping, paring end grain, cleaning up components by removing thin shavings in order to make a component fit within tight tolerances, chamfering and cleaning up glue lines.</p> <p></p> <p>The Luban 101 Bronze Block plane is the smallest compact little unit in the range a traditional coffin shaped design for snug use with one hand and comes with a blade bedded at 12 degrees.  </p> <p></p> <p>Features Summary</p> <p></p> <p>Body material: Cast Bronze</p> <p></p> <p>Blade steel: T10</p> <p></p> <p>Hardness of blade: 59-63</p> <p></p> <p>Cutting width: 22 mm</p> <p></p> <p>Cutting edge: Honed to 25 degrees</p> <p></p> <p>Angle of blade to sole: 12 degrees</p> <p></p> <p>Weight: 235g</p> <p></p> <p>Size: 87 mm L * 32 mm W</p> <p></p> <h3>Our evaluation of the Luban Mod.101 Block Plane, T10 Blade</h3> <p>The Luban Mod.101 Block Plane, T10 Blade has been carefully evaluated by our team of experts at Grandi Liutai and represents an excellent choice for luthiers and craftsmen seeking a high-quality tool for woodworking. We are pleased to confirm that it is a top-notch plane that delivers exceptional performance. The Luban Mod.101 features a high-quality T10 blade known for its hardness and wear resistance. The blade is finely sharpened and maintains its edge for extended periods, ensuring clean and precise cuts. Its shape and size are ideal for woodworking on a small scale, allowing for great precision in detail work. We particularly appreciate the durability and solidity of this plane. Its cast iron construction ensures long-lasting performance and stability during use. Additionally, the ergonomic design and comfortable grip provide a secure hold and optimal control while working. The Luban Mod.101 comes with a precise adjustment system that allows for easy setting of the desired cutting depth. This feature is extremely useful for achieving accurate and consistent results on the wood surface. Furthermore, this plane is easy to clean and maintain. The blade can be easily sharpened or replaced, ensuring long-term reliability. Its high-quality construction also provides corrosion resistance, extending the tool's lifespan. In conclusion, the Luban Mod.101 Block Plane, T10 Blade is a top-quality tool that we highly recommend to luthiers, craftsmen, and anyone involved in woodworking. Its high-quality blade, sturdy construction, precise adjustment, and ease of maintenance make it an excellent choice for achieving professional and precision results in woodworking.</p>

023.101

5/ 5

<p>This finely crafted block plane is designed for general purpose soothing and shaping, paring end grain, cleaning up components by removing thin shavings in order to make a component fit within tight tolerances, chamfering and cleaning up glue lines.</p> <p></p> <p>The Block Standard plane comes with a finer thread on the adjustment rod, giving more precise control over the blade adjusment and depth of cut. The mechanism reduces potential for lateral movement during the adjustment.</p> <p></p> <p>The Luban Block plane sits firmly in the palm and is a delight to use.</p> <p></p> <p>Features Summary</p> <p></p> <p>Body material: Iron</p> <p>Blade steel: T10</p> <p>Hardness of blade: 59-63</p> <p>Cutting edge: Honed to 25 degrees</p> <p>Angle of blade to sole: 20 degrees</p> <p>Weight: 860g</p> <p>Size: 160mm L * 45mm W * 63mm H</p>

023.100

5/ 5

<p>With its traditional design, where the user can adjust the cutting edge by turning the knurled screw in the back, this sharpening system is one of the most precise and easy-to-use on the market. Simply angle the edge of the plane blade or chisel blade with the sliding ""T-piece"", pull the blade out to your sharpening stone and tighten the clamping knob, now you can finely adjust the cutting angle with the rear micro-adjustment knob. With a few simple steps, you can get accurate and repeatable results. Using the setting gauge always gives you the same angle when grinding. The setting gauge is marked with the angles 20°, 25°, 30° and 35°. If you want a micro bevel on the edge, simply turn the knob further, one turn of the knob will move the angle just under one degree further.</p> <p>Max. blade width 63 mm</p> <p>Max. blade thickness 12.5 mm</p> <p></p>

032.269

5/ 5

<p>Synthetic high-tech oil for instrument and tool care. Odourless, transparent, silicone-free. No blotches or crusting, unlike with mineral oils. The 7 mm long V2A stainless steel tip allows precise dosage even on large surfaces, e.g. all types of scissor and shear blades.</p> <p>Anti-drip valve for precise dosage, no dripping</p> <p>Vapour-permeable, resists temperatures of up to 260 °C</p> <p>Drips best at room temperature</p> <p>Approved for food by USDA* and FDA*</p> <p>Physiologically safe according to DAB* and LFGB*</p> <p>Also ideal for folding knives, weapon care, cosmetic instruments</p> <p>*</p> <p>USDA - United States Department of Agriculture</p> <p>FDA - Food and Drug Administration</p> <p>DAB - Deutsches Arzneibuch (German Pharmacopoeia)</p> <p>LFGB - Lebensmittel- und Futtermittelgesetzbuch (German Food and Feedstuff Code)</p> <p></p>

032.268

5/ 5

<p>Degreases all metallic surfaces.</p> <p></p>

032.267

5/ 5

<p>With laser-etched degree scale for setting the correct angle of inclination on the blade.</p> <p></p>

032.265

5/ 5

<p>This high-quality cast iron sharpening guide with its large clamping surface is ideal for sharpening Japanese plane blades and very wide chisels. The long roller prevents tilting during sharpening. Light and comfortable to use, thanks to large winged walnut handles.</p> <p>Max. blade width 78 mm</p> <p>Max. blade thickness 12 mm</p> <p></p>

032.264

5/ 5

<p>Our Sharpening Primer Woodturning contains detailed instructions on how to sharpen turning tools. It also contains consistent and practical descriptions of specific types of grinds produced using Tormek jigs and the Oneway Wolverine grinding jig (on a double-wheeled grinder). The protrusions required to do so are relatively easy to adjust by simply resting the sharpening guide against the edge of this gauge and pushing the woodturning tool into the relevant pocket right up to the stop. This removes the need to measure the tool afterwards. Supplied with Sharpening Primer in German. Dimensions 265 x 150 x 24 mm</p> <p></p>

032.263

5/ 5

<p>The Sharp Skate 4 Blade Edition allows you to sharpen in every direction so is easier and more effective to use than conventional sharpening guides. In addition, grinding of skewed chisels can be carried out up to an angle of 45°. A specially designed guide rail ensures a perfect running profile and precision while sharpening. With the different sharpening directions, every part of the sharpening stone can be fully utilised. Includes English and German instructions for use.</p> <p>Max. blade width 67 mm</p> <p>Max. blade thickness 10 mm</p> <p></p>

032.262

5/ 5

<p>With this set, you can create the traditional surface protection at home, accurately burnishing knife backs or other metal components. You can also touch up existing finishing, e.g. on rifle shafts, without any problems.</p> <p>Burnishing creates a protective layer (patina) on a ferrous surface to protect against rust.</p> <p>Content:</p> <p>Ballistol Universal Oil, spray 50 ml</p> <p>Ballistol Robla Cold Degreaser, spray 50 ml</p> <p>Ballistol Klever Quick Burnishing, bottle 50 ml</p> <p>2 pairs of nitril disposable gloves</p> <p>2 goat hair brushes</p> <p>2 lint-free care cloths</p> <p>Burnishing is used for corrosion protection. In contrast to other processes, no additional layer is applied to the metal during burnishing, but a mixed oxide layer of FeO and Fe2O3 is created on the surface to protect against corrosion. During the burnishing process, the colour of the surface changes to black or dark blue.</p> <p>To achieve an even result, the metal must first be treated with a degreaser and possibly also with fine steel wool (grit 00). Then you can start the actual burnishing at a temperature of 20-30 °C. Oil the burnished workpiece overnight to stabilise the burnishing.</p> <p></p> <p>Hazard statement</p> <p>Extremely flammable aerosol. Pressurised container: May burst if heated. Causes skin irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects. May be corrosive to metals. Harmful if swallowed. Causes serious eye irritation.</p> <p></p>

032.261

5/ 5

<p>This adapter extends the clamping height of the Veritas Sharpening System II for clamping mortise chisels with up to 18 mm blade thickness. By opening the brass screw on the top of the sharpening aid, you can insert the adapter and fasten it with the same screw. Fits Veritas Sharpening System II with Narrow Blade Honing Guide </p> <p></p>

032.260

5/ 5

<p>With plastic rollers and a folding angle gauge, incl. sharpening stone and oil.</p> <p>Max. blade width 65 mm</p> <p>Max. blade thickness 9 mm</p> <p>Grit 120 / 240</p> <p></p>

032.259

5/ 5

<p>Proven cleaning and polishing agent for all shiny metals (steel, stainless steel, aluminium, brass, copper, silver, gold, nickel, chromium etc.). Ideal for honing blades on leather, e.g. Tormek sharpening system, strops, etc. Non-toxic, acid- and formaldehyde-free.</p> <p>Content 100 ml</p> <p></p>

032.257

5/ 5

<p>Clamp the blade in the guide and set the desired bevel angle using the angle jig. The sharpening is done on a bench stone. The wide roller assures stability and preserves the surface of the stone. The tappet screw allows honing to a second (micro) bevel without having to reclamp the blade. Set, honing guide and angle jig.</p> <p>Max. blade width 60 mm</p> <p>Max. blade thickness 15 mm</p> <p></p>

032.256

5/ 5

<p>Ideal for accurately burnishing knife backs or other metal components, as well as repairing existing burnishings, e.g. on rifle shafts.Burnishing creates a protective layer (patina) on a ferrous surface to protect against rust.</p> <p>Burnishing is a means of corrosion protection. In contrast to other techniques, no additional layer is applied to the metal during burnishing, rather an anti-corrosive, mixed oxide layer of FeO and Fe2O3 is created on the surface. During the burnishing process, the colour of the surface changes to black or dark blue.</p> <p>In order to achieve an even surface finish, the metal must first be treated with a degreaser and possibly also with fine steel wool (grit 00). Afterwards, the actual burnishing process can be started at a temperature of 20-30 °C. The finished workpiece should then be oiled overnight to stabilise the burnish.</p> <p></p>

032.254

5/ 5

<p>The blade is centrally held in one of the two grooves in the vice-like aluminium jaws. The 26 mm wide roller precisely maintains the angle of 90° without tilting.</p> <p>Max. blade width 82 mm</p> <p>Max. blade thickness 7 mm</p> <p></p>

032.253

5/ 5

<p>Hard-chromed Victorinox sharpening steel with round middle-fine cut. Comfortable black plastic handle with hand protection and hanging eyelet. To sharpen knives, simply move the blade along the two sides across the sharpening steel.</p> <p></p>

032.249

5/ 5

<h3>Our evaluation of Eau Japonaise - Popote 500ml</h3> <p>At Grandi Liutai, we have evaluated Eau Japonaise - Popote 500ml for cleaning varnishes and musical instruments in our lutherie workshops. We have found it to be a high-quality and highly effective product in removing glue and varnish residue from our instruments. </p> <p>Eau Japonaise - Popote 500ml is a colorless and odorless liquid that is easy to apply to the surface of instruments. Thanks to its gentle formula, it does not damage the varnish but rather cleans it deeply without leaving streaks or marks. </p> <p>Additionally, we have noticed that this product is equally effective in cleaning the instruments themselves, such as metal parts or strings of stringed instruments. Its ability to remove dirt and grease residue makes musical instruments easier to play and prolongs their lifespan. </p> <p>Finally, Grandi Liutai has greatly appreciated the practical and functional packaging of Eau Japonaise - Popote 500ml, which allows for easy dosing and precise application. The drip spout cap allowed us to apply the product evenly and controlled, avoiding waste or excess. </p> <p>In conclusion, our company can assert that Eau Japonaise - Popote 500ml is a high-quality product and highly recommended for cleaning varnishes and musical instruments. Its effectiveness, gentleness on the surface of the instruments, and the practicality of the packaging make it an essential tool for every luthier or musician who wants to keep their instruments in perfect condition.</p>

045.500

5/ 5

<p>Simple ceramic sharpening rod made of Kyocera special ceramic for grinding or honing. It is ideal for quick and uncomplicated resharpening of carving and hook knives, as well as European knives. It has a coarse side for grinding and fine side for honing. The hone becomes clogged over time and therefore needs to be cleaned every now and then with a rough kitchen sponge and some washing-up liquid. Can be used dry or wet.</p> <p>Length 255 mm</p> <p></p>

032.248

5/ 5

<p>For speedy resharpening of knives (also serrated), axes and scissors. V-shaped, wear-resistant carbide element. Aluminium grip with hand protection. Includes instructions and case.</p> <p></p>

032.247

5/ 5

<p>For sharpening and finishing.</p> <p>King combination stone, grit 1000/6000; stone holder </p> <p></p>

032.246

5/ 5

<p>This set provides you with a combination of sharpening stones for most tools (e.g. chisels, plane blades, knives). It contains a Sun Tiger 220 grit coarse shaping stone for pre-sharpening, King 800 grit and 1200 grit sharpening stones for sharpening, plus a King 4000 grit stone and a polishing stone 8000 grit for honing and polishing. Also included are a trueing set for trueing the stones and a sharpening stone holder </p> <p></p>

032.244

5/ 5

<p>Questo set comprende un blocco di affilatura DMT per la preaffilatura grossolana della lama in caso di microfratture e per rettificare la pietra. Inclusa nel set anche una pietra combinata Konsuto 1000/6000 per affilare e lappare nonché tappetino antiscivolo per l’affilatura e la lappatura e una guida a due griffe per l’affilatura con angolatura precisa</p> <p></p>

032.243

5/ 5

<p>A rough DMT trueing block is used for pre-grinding blades with nicks and for trueing the sharpening stone. The King 1000/6000 grit combination stone for sharpening and honing rests securely on the non-skid mat </p> <p></p>

032.242