List of products by brand Kunsuto
Kunsuto sharpening stones online shop
-
Grandi Liutai Italiani,
5/
5
<p>"Abrasive white aluminium oxide.</p>
<p>Stones with medium sized grit for sharpening blunt blades. Abrasive: #600 aluminium oxide; #1000 aluminium oxideand white aluminium oxide; #3000 white aluminium oxide.</p>
<p>Kunsuto Sharpening Stone Series</p>
<p>This stone series was developed in cooperation with a Japanese sharpening stone expert. The aim was to create a Japanese stone series suitable for both high-alloy tool steels and low-alloy carbon steels. The numerous tests were supported by microscopic images of the cutting edges after sharpening. This stone series has a medium-hard bond, which does not wear out quickly even with tool steels made of alloy components with a coarse grain structure (e.g. chromium and vanadium). However, both steel types allow good material removal with a pleasant ease of use. The microscopic images show a harmonious surface and a precise cutting edge form for both types of steel.</p>
<p>Before use, soak the stone for at least 10 minutes. Do not keep it in water permanently.</p>
<p></p>
<p>Dimensions 205 x 78 x 25 mm</p>
<p></p>
032.396
€31.89
-
Grandi Liutai Italiani,
5/
5
<p>Fine grain water stones for removing the burr, polishing and honing. White aluminium oxideabrasive.</p>
<p>Kunsuto Sharpening Stone Series</p>
<p>This stone series was developed in cooperation with a Japanese sharpening stone expert. The aim was to create a Japanese stone series suitable for both high-alloy tool steels and low-alloy carbon steels. The numerous tests were supported by microscopic images of the cutting edges after sharpening. This stone series has a medium-hard bond, which does not wear out quickly even with tool steels made of alloy components with a coarse grain structure (e.g. chromium and vanadium). However, both steel types allow good material removal with a pleasant ease of use. The microscopic images show a harmonious surface and a precise cutting edge form for both types of steel.</p>
<p>Before use, soak the stone for at least 10 minutes. Do not keep it in water permanently.</p>
<p> </p>
<p>Dimensions 205 x 78 x 25 mm</p>
<p></p>
032.393
€54.84
-
Grandi Liutai Italiani,
5/
5
<p>For sharpening and honing.</p>
<p>This stone features two different grit sizes. Abrasive: #1000 aluminium oxideand white aluminium oxide, # 3000 and 6000 white aluminium oxide.</p>
<p>Kunsuto Sharpening Stone Series</p>
<p>This stone series was developed in cooperation with a Japanese sharpening stone expert. The aim was to create a Japanese stone series suitable for both high-alloy tool steels and low-alloy carbon steels. The numerous tests were supported by microscopic images of the cutting edges after sharpening. This stone series has a medium-hard bond, which does not wear out quickly even with tool steels made of alloy components with a coarse grain structure (e.g. chromium and vanadium). However, both steel types allow good material removal with a pleasant ease of use. The microscopic images show a harmonious surface and a precise cutting edge form for both types of steel.</p>
<p>Before use, soak the stone for at least 10 minutes. Do not keep it in water permanently.</p>
<p></p>
<p>Grit 1000/6000</p>
<p>Dimensions 205 x 75 x 35 mm</p>
<p></p>
032.390
€37.62
-
Grandi Liutai Italiani,
5/
5
<p>This set consists of sharpening stones with grits 600, 1000 and 3000.</p>
<p>Set consists of grits 600, 1000 and 3000. It is ideal for sharpening cutting tool edges.</p>
<p>Kunsuto sharpening stones</p>
<p>This stone series was developed in cooperation with a Japanese sharpening stone expert. The aim was to create a Japanese stone series suitable for both high-alloy tool steels and low-alloy carbon steels. The numerous tests were supported by microscopic images of the cutting edges after sharpening. This stone series has a medium-hard bond, which does not wear out quickly even with tool steels made of alloy components with a coarse grain structure (e.g. chromium and vanadium). However, both steel types allow good material removal with a pleasant ease of use. The microscopic images show a harmonious surface and a precise cutting edge form for both types of steel.</p>
<p>Before use, soak the stone for at least 10 minutes. Do not keep it in water permanently.</p>
<p></p>
<p>Grit 600, 1000, 3000</p>
<p>Dimensions 205 x 78 x 25 mm</p>
<p></p>
032.385
€91.72
-
Grandi Liutai Italiani,
5/
5
<p>Aluminium oxide abrasive.</p>
<p>Kunsuto Oilstones</p>
<p>These stones were developed to offer a complete series of sharpening oilstones for sculpting gouges and chisels. Until now, only coarse synthetic oilstones (Norton India) and Arkansas natural stones with very fine grit were available on the market in good quality. The Kunsuto sharpening stones close this gap and allow a continuous sharpening process with oilstones of grit 220 and 1000 (Norton India), the medium grits 2000 and 4000 for shaping the cutting edge (Kunsuto), and the Arkansas natural stone. The development process of the stones made in Germany was supported by microscope images of the cutting edges after sharpening. Pre-soaked with oil in the factory, it comes ready for use.</p>
<p>Grit 2000</p>
<p>Dimensions 200 x 50 x 25 mm</p>
<p></p>
032.136
€22.87
-
Grandi Liutai Italiani,
5/
5
<p>Aluminium oxide abrasive.</p>
<p>Kunsuto Oilstones</p>
<p>These stones were developed to offer a complete series of sharpening oilstones for sculpting gouges and chisels. Until now, only coarse synthetic oilstones (Norton India) and Arkansas natural stones with very fine grit were available on the market in good quality. The Kunsuto sharpening stones close this gap and allow a continuous sharpening process with oilstones of grit 220 and 1000 (Norton India), the medium grits 2000 and 4000 for shaping the cutting edge (Kunsuto), and up to the Arkansas natural stone. The development process of the stones made in Germany was supported by microscope images of the cutting edges after sharpening. Pre-soaked with oil in the factory, it comes ready for use.</p>
<p>Grit 2000/4000</p>
<p>Dimensions 200 x 50 x 25 mm"</p>
032.135
€22.87
-
Grandi Liutai Italiani,
5/
5
<p>Aluminium oxide abrasive.</p>
<p>Kunsuto Oilstones</p>
<p>These stones were developed to offer a complete series of sharpening oilstones for sculpting gouges and chisels. Until now, only coarse synthetic oilstones (Norton India) and Arkansas natural stones with very fine grit were available on the market in good quality. The Kunsuto sharpening stones close this gap and allow a continuous sharpening process with oilstones of grit 220 and 1000 (Norton India), the medium grits 2000 and 4000 for shaping the cutting edge (Kunsuto), and up to the Arkansas natural stone. The development process of the stones made in Germany was supported by microscope images of the cutting edges after sharpening. Pre-soaked with oil in the factory, it comes ready for use.</p>
<p>Grit 4000</p>
<p>Dimensions 200 x 50 x 25 mm</p>
<p></p>
032.134
€24.51
-
Grandi Liutai Italiani,
5/
5
<p>Coarse-grained stone for material removal, repairs, removing nicks, changing the bevel angle, removing corrosion. Silicon carbide abrasive.</p>
<p>Kunsuto Sharpening Stone Series</p>
<p>This stone series was developed in cooperation with a Japanese sharpening stone expert. The aim was to create a Japanese stone series suitable for both high-alloy tool steels and low-alloy carbon steels. The numerous tests were supported by microscopic images of the cutting edges after sharpening. This stone series has a medium-hard bond, which does not wear out quickly even with tool steels made of alloy components with a coarse grain structure (e.g. chromium and vanadium). However, both steel types allow good material removal with a pleasant ease of use. The microscopic images show a harmonious surface and a precise cutting edge form for both types of steel.</p>
<p>Before use, soak the stone for at least 10 minutes. Do not keep it in water permanently.</p>
<p></p>
<p>Grit 220</p>
<p>Dimensions 205 x 78 x 35 mm</p>
<p></p>
032.115
€34.34