Rasps

Active filters

  • ,
    5/ 5
    <p>This abrasive tool comprises a plastic handle with diverse available shapes and a replaceable metal plate for abrasion. These files are highly user-friendly and effortless to operate. The long-lasting abrasive surface of the metal plates performs exceptionally well over its entire lifespan. The Japanese manufacturer specifies a grit range of 280 to 400, classified as medium according to the Japanese standard, approximately corresponding to 240 grit in European standards. Nevertheless, since the tool employs a metal plate rather than traditional sandpaper, the numerical value serves only as an approximation to convey a sense of the magnitude</p>
    031.317
    Replacement trapezoidal rounded sanding plate 85 x 25 mm, radius from 1.5 mm to 12.5 mm NT Dresser Rasps

    Replacement trapezoidal rounded sanding plate 85 x 25 mm, radius from 1.5 mm to 12.5 mm

    €11.72
  • ,
    5/ 5
    <p>This abrasive tool comprises a plastic handle with diverse available shapes and a replaceable metal plate for abrasion. These files are highly user-friendly and effortless to operate. The long-lasting abrasive surface of the metal plates performs exceptionally well over its entire lifespan. The Japanese manufacturer specifies a grit range of 280 to 400, classified as medium according to the Japanese standard, approximately corresponding to 240 grit in European standards. Nevertheless, since the tool employs a metal plate rather than traditional sandpaper, the numerical value serves only as an approximation to convey a sense of the magnitude</p>
    031.316
    Replacement rectangular rounded Small sanding plate 85 x 8.5 mm, radius 5 mm mm NT Dresser Rasps

    Replacement rectangular rounded Small sanding plate 85 x 8.5 mm, radius 5 mm mm

    €9.26
  • ,
    5/ 5
    <p>Questo sistema abrasivo è costituito da un manico in plastica disponibile in varie forme e da una lastra metallica abrasiva sostituibile. Queste lime sono estremamente comode e facili da utilizzare. La superficie abrasiva delle lastre metalliche ha una lunga durata e funziona molto bene per tutto il suo ciclo di vita. Il produttore giapponese indica una grana tra 280 e 400, considerata media secondo lo standard giapponese, approssimativamente equivalente a una grana 240 negli standard europei. Tuttavia, poiché lo strumento utilizza una lastra metallica anziché carta abrasiva tradizionale, il numero è solo indicativo per fornire un'idea dell'ordine di grandezza</p>
    031.315
    Replacement Large Flat Rectangular Abrasive Plate NT-Dresser 152 x 51 mm NT Dresser Rasps

    Replacement Large Flat Rectangular Abrasive Plate NT-Dresser 152 x 51 mm

    €14.26
  • ,
    5/ 5
    <p>This abrasive tool comprises a plastic handle with diverse available shapes and a replaceable metal plate for abrasion. These files are highly user-friendly and effortless to operate. The long-lasting abrasive surface of the metal plates performs exceptionally well over its entire lifespan. The Japanese manufacturer specifies a grit range of 280 to 400, classified as medium according to the Japanese standard, approximately corresponding to 240 grit in European standards. Nevertheless, since the tool employs a metal plate rather than traditional sandpaper, the numerical value serves only as an approximation to convey a sense of the magnitude</p>
    031.314
    Replacement Flat Rectangular Abrasive Plate NT-Dresser 152 x 24 mm NT Dresser Rasps

    Replacement Flat Rectangular Abrasive Plate NT-Dresser 152 x 24 mm

    €9.26
  • ,
    5/ 5
    <p>This abrasive tool comprises a plastic handle with diverse available shapes and a replaceable metal plate for abrasion. These files are highly user-friendly and effortless to operate. The long-lasting abrasive surface of the metal plates performs exceptionally well over its entire lifespan. The Japanese manufacturer specifies a grit range of 280 to 400, classified as medium according to the Japanese standard, approximately corresponding to 240 grit in European standards. Nevertheless, since the tool employs a metal plate rather than traditional sandpaper, the numerical value serves only as an approximation to convey a sense of the magnitude.</p>
    031.313
    Replacement Flat Trapezoidal Abrasive Plate NT-Dresser 83 x 28 x 7 mm NT Dresser Rasps

    Replacement Flat Trapezoidal Abrasive Plate NT-Dresser 83 x 28 x 7 mm

    €6.80
  • ,
    5/ 5
    <p>This abrasive tool comprises a plastic handle with diverse available shapes and a replaceable metal plate for abrasion. These files are highly user-friendly and effortless to operate. The long-lasting abrasive surface of the metal plates performs exceptionally well over its entire lifespan. The Japanese manufacturer specifies a grit range of 280 to 400, classified as medium according to the Japanese standard, approximately corresponding to 240 grit in European standards. Nevertheless, since the tool employs a metal plate rather than traditional sandpaper, the numerical value serves only as an approximation to convey a sense of the magnitude</p>
    031.312
    Flat Trapezoidal NT-Dresser System 83 x 28 x 7 mm NT Dresser Rasps

    Flat Trapezoidal NT-Dresser System 83 x 28 x 7 mm

    €13.03
  • ,
    5/ 5
    <p>This abrasive tool comprises a plastic handle with diverse available shapes and a replaceable metal plate for abrasion. These files are highly user-friendly and effortless to operate. The long-lasting abrasive surface of the metal plates performs exceptionally well over its entire lifespan. The Japanese manufacturer specifies a grit range of 280 to 400, classified as medium according to the Japanese standard, approximately corresponding to 240 grit in European standards. Nevertheless, since the tool employs a metal plate rather than traditional sandpaper, the numerical value serves only as an approximation to convey a sense of the magnitude.</p>
    031.311
    Medium Rectangular Abrasive System NT-Dresser 152 x 24 mm NT Dresser Rasps

    Medium Rectangular Abrasive System NT-Dresser 152 x 24 mm

    €18.61
  • ,
    5/ 5
    <p>This abrasive tool comprises a plastic handle with diverse available shapes and a replaceable metal plate for abrasion. These files are highly user-friendly and effortless to operate. The long-lasting abrasive surface of the metal plates performs exceptionally well over its entire lifespan. The Japanese manufacturer specifies a grit range of 280 to 400, classified as medium according to the Japanese standard, approximately corresponding to 240 grit in European standards. Nevertheless, since the tool employs a metal plate rather than traditional sandpaper, the numerical value serves only as an approximation to convey a sense of the magnitude.</p>
    031.310
    Wide Rectangular Abrasive System NT-Dresser 152 x 51 mm NT Dresser Rasps

    Wide Rectangular Abrasive System NT-Dresser 152 x 51 mm

    €17.46
  • ,
    5/ 5
    <p>This abrasive tool comprises a plastic handle with diverse available shapes and a replaceable metal plate for abrasion. These files are highly user-friendly and effortless to operate. The long-lasting abrasive surface of the metal plates performs exceptionally well over its entire lifespan. The Japanese manufacturer specifies a grit range of 280 to 400, classified as medium according to the Japanese standard, approximately corresponding to 240 grit in European standards. Nevertheless, since the tool employs a metal plate rather than traditional sandpaper, the numerical value serves only as an approximation to convey a sense of the magnitude.</p>
    031.309
    Narrow Rectangular Rounded NT-Dresser System 85 x 8.5 mm, 5 mm radius NT Dresser Rasps

    Narrow Rectangular Rounded NT-Dresser System 85 x 8.5 mm, 5 mm radius

    €12.70
  • ,
    5/ 5
    <p>This abrasive tool comprises a plastic handle with diverse available shapes and a replaceable metal plate for abrasion. These files are highly user-friendly and effortless to operate. The long-lasting abrasive surface of the metal plates performs exceptionally well over its entire lifespan. The Japanese manufacturer specifies a grit range of 280 to 400, classified as medium according to the Japanese standard, approximately corresponding to 240 grit in European standards. Nevertheless, since the tool employs a metal plate rather than traditional sandpaper, the numerical value serves only as an approximation to convey a sense of the magnitude</p>
    031.308
    Rounded Trapezoidal Abrasive System NT-Dresser 85 x 25 mm, radius from 1.5 mm to 12.5 mm NT Dresser Rasps

    Rounded Trapezoidal Abrasive System NT-Dresser 85 x 25 mm, radius from 1.5 mm to 12.5 mm

    €15.16
  • ,
    5/ 5
    <p>This abrasive tool comprises a plastic handle with diverse available shapes and a replaceable metal plate for abrasion. These files are highly user-friendly and effortless to operate. The long-lasting abrasive surface of the metal plates performs exceptionally well over its entire lifespan. The Japanese manufacturer specifies a grit range of 280 to 400, classified as medium according to the Japanese standard, approximately corresponding to 240 grit in European standards. Nevertheless, since the tool employs a metal plate rather than traditional sandpaper, the numerical value serves only as an approximation to convey a sense of the magnitude.</p>
    031.307
    In English: Rounded Abrasive System NT-Dresser 85 x 24 mm, 12.5 mm radius NT Dresser Rasps

    In English: Rounded Abrasive System NT-Dresser 85 x 24 mm, 12.5 mm radius

    €18.61
  • ,
    5/ 5
    024.004
    Riffler Rasp Bent-Plate Shape - Cut 7 Grandi Liutai Italiani Rasps

    Riffler Rasp Bent-Plate Shape - Cut 7

    €13.85
  • ,
    5/ 5
    <p>The Italian  Handmade special rasps are the best quality and particulary precised hand-staked tools, very tapered and thin at the tip for the realization of artistic works such as violin making, where precise and accurate woodworking and finishing are required.</p> <p>The notch of the teeth is uniform and constant up to the tip of the rasps. This allows them to be used for detailing and in tight spaces.</p> <p>The handwork, therefore the non-mechanical distribution of the teeth, ensures a clean job, free from the typical grooves of the industrially produced tool.</p> <p>The handle of the rasp has been designed by luthiers to give a comfortable grip and precise contact with the tool.</p>
    024.003
    Riffler Rasp Knife Shape - Cut 7 Grandi Liutai Italiani Rasps

    Riffler Rasp Knife Shape - Cut 7

    €13.85

    Grandi Liutai Italiani Riffler Rasp Knife Shape is perfect for the sides of the pegbox of violin, viola and cello. The Italian  Handmade special rasps are the best quality and particulary precised hand-staked tools, very tapered and thin at the tip for the realization of artistic works such as violin making, where precise and accurate woodworking and finishing are required.

  • ,
    5/ 5
    <p><span lang="en-gb" style="font-size:11pt;line-height:107%;font-family:Calibri, 'sans-serif';" xml:lang="en-gb">Italian Leather Case made by hand, ideal for storing or transporting your file or rasp and prevent it from rusting or being damaged by bumping with other tools. The high thickness of the genuine leather guarantees excellent protection to the tool. The design is elegant and practical at the same time. This leather case is one of our best-selling items among lovers of fine tools.</span></p>
    029.001
    Italian Leather Rasp/Files Case Grandi Liutai Italiani Tools Accessories

    Italian Leather Rasp/Files Case

    €6.56
  • ,
    5/ 5
    024.053
    Flat Rasp - Handmade Grandi Liutai Italiani Rasps

    Flat Rasp - Handmade

    €40.57
  • ,
    5/ 5
    <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">The Italian  Handmade special rasps are the best quality and particulary precised hand-staked tools, very tapered and thin at the tip for the realization of artistic works such as violin making, where precise and accurate woodworking and finishing are required.</span></p> <p>The notch of the teeth is uniform and constant up to the tip of the rasps. This allows them to be used for detailing and in tight spaces.</p> <p>The handwork, therefore the non-mechanical distribution of the teeth, ensures a clean job, free from the typical grooves of the industrially produced tool.</p> <p>The handle of the rasp has been designed by luthiers to give a comfortable grip and precise contact with the tool.</p> <p><iframe width="250" height="250" src="https://www.youtube.com/embed/UlkQ1e9vLWE" frameborder="0"></iframe></p>
    024.056
    Half-Round Rasp - Handmade Grandi Liutai Italiani Rasps

    Half-Round Rasp - Handmade

    €40.90

    The Italian  Handmade special rasps are the best quality and particulary precised hand-staked tools, very tapered and thin at the tip for the realization of artistic works such as violin making, where precise and accurate woodworking and finishing are required.