Grinders & Accessories

5/ 5

032.414

5/ 5

<p>With diamond tip, for trueing ingrained or unround grinding wheels.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p></p>

032.413

5/ 5

<p>Fits models 2000 - 2006 and T7. </p> <p></p>

032.412

5/ 5

<p>Linen, suitable for Tormek T-7 and T-8.</p> <p></p>

032.411

5/ 5

<p>For turning tools (scrapers, scorps, inshaves), chisels, scraper blades etc. ""Torlock"" locking system.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p></p>

032.410

5/ 5

<p>Enables you to easily rotate the machine 180° and lock it with complete stability. It makes it easy to alternate between sharpening/honing or sharpening towards or away from the edge. Fits all models.</p> <p></p>

032.409

5/ 5

<p>Sharpens all makes and shapes of profile knifes. Also for profiled paint removal blades suitable for Tormek T-8, T-7, T-4, T-3 and old series models.</p> <p>For profile knifes with 24, 30 or 38 mm distance between guide holes. Not suitable for knives without guide holes.</p> <p></p>

032.408

5/ 5

<p>A very fine polishing paste developed for use with polishing wheel on the Sorby ProEdge. This polish can be mixed with water to make a paste and used as a cleaning and polishing agent. 100 x 35 x 20 mm</p> <p></p>

032.359

5/ 5

<p>For straight shear blades, hedge shears or plane blades. The jaws can be finely adjusted to the respective blade thickness. The separate guide plate can also be used as a grinding table. Total clamping length 115 mm, max. blade thickness 8 mm. Suitable for sharpening machines with guide rod diameter 12 mm.</p> <p></p>

032.358

5/ 5

<p>This sharpening system allows the sharpening of bevels of 25° and 30° on one side and 27° and 32° on the opposite side, thus allowing the grinding of a micro bevel. Suitable for plane blades and chisels, without requiring time-consuming adjustments. The dry grinding system means it can be used irrespective of environmental conditions. Hence, it is ideal for use on construction sites and anywhere where quick results are needed without requiring maximum sharpness.</p> <p>Insertion of the magnetically attached diamond stone with corresponding grit</p> <p>Insertion of slide with alignment for 25° and 30° bevel angles or 27°and 32° bevel angles</p> <p>Insertion of plane blade/chisel and fixing in place at stop against counter-pressure</p> <p>Grinding of bevel angle by moving the slide</p> <p>Where necessary, removal of the burr on the back of the blade</p> <p></p> <p>Tool support and slide are made of solid milled and anodised aluminium with dovetail guide and wear-resistant nylon slide rail.</p> <p>M. Power Tools DC Diamond Stones</p> <p>Diamond Cross (DC) sharpening stones offer an excellent price/performance ratio with a high manufacturing quality. The lapping of the supporting plates and the stringent quality controls are performed at the company's headquarters in England.</p> <p>Monocrystalline* diamond particles guarantee a long service life and excellent material removal</p> <p>Uniform grit sizes and a dense diamond distribution for even grinding patterns</p> <p>Cross-shaped recesses prevent clogging due to grinding debris</p> <p>Permanently flat and warp-free thanks to specially lapped supporting plates made of steel with a stainless steel matrix</p> <p>Monocrystalline* diamond-coated sharpening devices:</p> <p>Diamond-coated sharpening devices remain permanently flat, and are especially suitable for tools with straight blades, as well as for producing flat surfaces (e.g. backs of plane and chisel blades, plane soles, scrapers). Also suitable for carbide coated cutters, tool steels, HSS and non-metal materials (glass, ceramic, etc.). We recommend moistening diamond-coated sharpening devices with water and grinding with little pressure.</p> <p>* Monocrystalline diamonds are significantly more wear resistant than the polycrystalline diamonds used to make lesser quality diamond sharpening tools.</p> <p>Scope of delivery</p> <p></p> <p>Fasttrack MK2 sharpening system, 1 x diamond stone medium-coarse, 1 x diamond stone medium-fine, cleaning block, removable fence, non-slip mat.</p> <p> </p> <p>Max. blade width 64 mm</p> <p></p>

032.352

5/ 5

<p>Fits models 1200 - 1206 and T-3 and T-4.</p> <p>Ø 145 mm</p> <p>Model LA-145</p> <p>Width 26 mm</p> <p></p>

032.351

5/ 5

<p>Suitable for Tormek T-3, T-4 and old series models.</p> <p></p>

032.350

5/ 5

<p>Short jig, axe jig, knife jig, small knife holder, long slender knives jig, scissors jig. Comes in practical plastic box with hard foam inlay.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8</p> <p></p>

032.347

5/ 5

<p>Fits models 2000-2006, T-7, and T-8.</p> <p>The composite honing wheel has an integrated polishing agent and is easy to handle. An advantage over the leather honing wheel is that the composite wheel can be used in clean environments and no honing paste has to be applied.</p> <p>Fits models 2000-2006, T-7, and T-8.</p> <p>Ø 220 mm</p> <p>Model CW-220</p> <p>Width 31 mm</p> <p></p>

032.344

5/ 5

<p>For cleaning diamond grinding wheels and protecting them against corrosion if not used for a long time. 2 x 150 ml.</p> <p></p>

032.343

5/ 5

<p>For cleaning the water container of the Tormek T-8 Original.</p> <p></p>

032.342

5/ 5

<p>Universal jig for turning tools and carving gouges with straight and curved cutting edges and for skew and straight chisels.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p></p>

032.340

5/ 5

<p>For adjusting bevel angles of turning tools and chisels, independently of wheel diameter. Used in combination with jigs (SVD-186 R and SVS-50).</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p></p>

032.339

5/ 5

<p>Attachment to adapt the Tormek bench grinder mounting kit BGM-100 directly to a Wolverine V-arm. It allows to use any Tormek honing guide on double-wheeled grinders with the Wolverine system.</p> <p></p>

032.338

5/ 5

<p>Including screw terminal with a span width of 62 mm to be attached to workbenches or table tops.</p> <p>Precision optics with 3 dioptres (1.75x magnification), real glass lense, adjustable LED light and lens cover. Additional hinge allows the lamp head with 125 mm optical glass and 90 LEDs to be pivoted independently of the gooseneck position. This ensures optimum illumination of the work area and prevents shadows from forming. Durable LED technology, 8-watt power supply for energy saving, 230 V.</p> <p></p>

032.335

5/ 5

<p>This compact diamond truer is used for trueing, cleaning and dressing silicon carbide and aluminium oxidegrinding wheels of double-wheeled grinders. You simply place the tool on the tool rest and press it against the grinding wheel. The textured handle ensures a secure grip. Coated area 40 x 10 mm.</p> <p></p>

032.334

5/ 5

<p>Support table for sharpening flat cutting edges such as flat chisels and scraper blades, parting tools and inshaves. The 107 x 88 mm support enables a wide range of tools to be guided safely. Suitable for sharpening machines with guide rod diameter 12 mm.</p> <p></p>

032.333

5/ 5

<p>For short carving blades, hollow gouges and V-parting tools or small woodturning gouges A plastic cap on the pressure screw avoids pressure marks on the tools. Clamping width max. 36 mm.</p> <p></p>

032.332

5/ 5

<p>Thanks to the high speeds of polishing motors, fibres of the polishing discs and polishing paste are spun away. The sheet steel housing with folding splash guard prevents contamination on workbenches or walls. A must for work outside workshops, e.g. on kitchen tables or desks. Dimensions 360 x 150 x 200 mm. For mounting on mini polishing motors </p> <p></p>

032.331

5/ 5

<p>For sharpening knife blades from 100 mm blade length. Wide clamping jaws allow the blade to be held securely and an adjustment screw allows the stop to be set.</p> <p></p>

032.330

5/ 5

<p>Machine including three waterstones (grits 280, 1000 and 6000).</p> <p>Shinko Sharpening Machine</p> <p>The Shinko sharpening system enables the achievement of professional sharpening results. Clogging rarely occurs with the open-pored Japanese waterstones. Water cooling and plane-honing produces long-lasting and strong edges. Because no heat is generated, the blade can be held very close to its edge and guided very accurately. No sparks are produced, allowing the device to be safely operated in workshops and instructional settings. The stone surrounding foam ring is easily pressed down when sharpening long blades.</p> <p>Sharpening wheel:</p> <p>Japanese waterstone, grit 1000, Ø 180 x Ø 70 mm, thickness 20 mm, steel mount, wheel nut, splashguard.</p> <p>Motor: 220 V, 125 W, 50/60 Hz, 450 rpm gear-driven.</p> <p>Casing: Plastic, tool rest adjustable in height and angle. Water container with valve, drain tube.</p> <p>Overall weight approx. 5.5 kg.</p> <p></p>

032.327

5/ 5

<p>Maximum precision and solid zinc cast housing</p> <p>TORMEK T-8 Original takes precision and stability to a completely new level. The new design integrates the previously mounted sleeves for the vertical and horizontal support into the revolutionary fully cast top and frame. The enhanced stability optimizes jig guidance and thus the sharpening accuracy.</p> <p>The Tormek DC-250 Diamond Grinding Wheel with grit 360 achieves efficient removal and quickly repairs a blunt or damaged cutting edge. It is the ideal grinder for the turner and is particularly durable. The high quality of the diamond grinding surface ensures efficient, constant sharpening with a constant wheel diameter. With this set you also receive all relevant sharpening guides.</p> <p>Diamond grinding wheel ""Tormek DC-250"", grit 360, Ø 250 x 50 mm; leather honing wheel Ø 215 x 30 mm; universal support with fine adjustment (can be used horizontally or vertically). 230 V, 200 W, 90 rpm, torque 14.7 Nm, 14.8 kg.</p> <p>Includes:</p> <p>Square edge jig (SE-77)</p> <p>Adjustable trueing tool (TT-50) and stone grader (SP-650) for additional standard sharpening wheels (water stones)</p> <p>Anti-corrosion concentrate, 150 ml (ACC-150)</p> <p>Pro Angle Master (WM-200)</p> <p>Honing compound (PA-70)</p> <p>Handbook (HB-10)</p> <p>Instruction video (DVD-1)</p> <p>Woodturner's kit (TNT-808)</p> <p>Edge marker (EM-15)</p> <p>Comes with Tormek manual in German language.</p> <p>Tormek Sharpening System</p> <p>Proven for many years and constantly perfected wet working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.</p> <p>The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The offset front end can also be used for flat honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.</p> <p>A summary of the advantages of Tormek sharpening machines</p> <p>Longer working life of T-8 and T-4 Original:</p> <p>Stainless steel spindle with EzyLock-System for easier stone assembling</p> <p>Solid zinc cast housing with integrated vertical and horizontal support</p> <p>Better motor insulation</p> <p></p> <p>Additional advantages of T-8 Original:</p> <p>Electrophoretic dip painted casing, zinc cast housing frame and robust ABS plastic sides for better corrosion protection</p> <p>Silent running, maintenance free motor, designed for continuous operation, 25 000 hour life</p> <p>Improved water container with screw lift for easy positioning, overspill rim, drip-off plate, magnetic swarf collector and magnetic cleaning scraper</p> <p></p>

032.326

5/ 5

<p>Maximum precision and solid zinc cast housing</p> <p>The TORMEK T-8 Original takes precision and stability to a completely new level. The new design integrates the previously mounted sleeves for the vertical and horizontal support into the revolutionary fully cast top and frame. The enhanced stability optimises jig guidance and thus the sharpening accuracy.</p> <p>The Tormek DE-250 diamond grinding wheel with a grit size of 1200 provides a very fine grinding surface and is ideal for carving tools, knives, chisels or plane blades. Thanks to the additional grinding surface on the side, a straight bevel can be ground into the tool without hollow grinding. For sharpening on the side of the diamond grinding wheel, we recommend the Tormek Multi Base (MB-100) with the appropriate sharpening device for the respective tool.</p> <p>Sharpening wheel ""Tormek DE-250"", grit 1200, Ø 250 x 50 mm; leather honing wheel Ø 215 x 30 mm; universal support with fine adjustment (can be used horizontally or vertically). 230 V, 200 W, 90 rpm, torque 14.7 Nm, 14.8 kg.</p> <p>Includes:</p> <p>Square Edge Jig (SE-77)</p> <p>Adjustable Trueing Tool (TT-50) and Stone Grader (SP-650) for purchasing additional standard sharpening wheels (water stones)</p> <p>Anti-corrosion Concentrate, 150 ml (ACC-150)</p> <p>Pro Angle Master (WM-200)</p> <p>Honing Compound (PA-70)</p> <p>Handbook (HB-10)</p> <p>Instruction Video (DVD-1)</p> <p>Edge marker (EM-15)</p> <p>Comes with Tormek manual in German language.</p> <p>Tormek Sharpening System</p> <p>Proven for many years and constantly perfected wet working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.</p> <p>The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The offset front end can also be used for flat honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.</p> <p>A summary of the advantages of Tormek sharpening machines</p> <p>Longer working life of T-8 and T-4 Original:</p> <p>Stainless steel spindle with EzyLock-System for easier stone assembling</p> <p>Solid zinc cast housing with integrated vertical and horizontal support</p> <p>Better motor insulation</p> <p></p> <p>Additional advantages of T-8 Original:</p> <p>Electrophoretic dip painted casing, zinc cast housing frame and robust ABS plastic sides for better corrosion protection</p> <p>Silent running, maintenance free motor, designed for continuous operation, 25 000 hour life</p> <p>Improved water container with screw lift for easy positioning, overspill rim, drip-off plate, magnetic swarf collector and magnetic cleaning scraper</p> <p></p>

032.325

5/ 5

<p>Maximum precision and solid zinc cast housing</p> <p>TORMEK T-8 Original takes precision and stability to a completely new level. The new design integrates the previously mounted sleeves for the vertical and horizontal support into the revolutionary fully cast top and frame. The enhanced stability optimizes jig guidance and thus the sharpening accuracy.</p> <p>""Tormek Original"" sharpening stone (SG-250) aluminium oxideØ 250 x 50 mm, grit 220; leather honing wheel Ø 220 x 30 mm; universal support, finely adjustable (can be used horizontally or vertically). 230 V, 200 W, 90 rpm, torque 14.7 Nm, 14.8 kg.</p> <p>Includes:</p> <p>Hand Tool Kit HTK-806 with short jig, axe jig, knife jig, small knife holder, long knives jig, scissors jig</p> <p>Square edge precision jig (SE-77)</p> <p>Adjustable trueing tool (TT-50)</p> <p>Stone preparer (SP-650)</p> <p>Angle gauge (WM-200)</p> <p>Honing compound (PA-70)</p> <p>Handbook (HB-10)</p> <p>Instruction video (DVD-1)</p> <p>Workshop ""Sharpening on the Tormek""</p> <p>Edge marker (EM-15)</p> <p>Comes with Tormek manual in German language.</p> <p>Tormek Sharpening System</p> <p>Proven for many years and constantly perfected wet working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.</p> <p>The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The offset front end can also be used for flat honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.</p> <p>A summary of the advantages of Tormek sharpening machines</p> <p>Longer working life of T-8 and T-4 Original:</p> <p>Stainless steel spindle with EzyLock-System for easier stone assembling</p> <p>Solid zinc cast housing with integrated vertical and horizontal support</p> <p>Better motor insulation</p> <p></p> <p>Additional advantages of T-8 Original:</p> <p>Electrophoretic dip painted casing, zinc cast housing frame and robust ABS plastic sides for better corrosion protection</p> <p>Silent running, maintenance free motor, designed for continuous operation, 25 000 hour life</p> <p>Improved water container with screw lift for easy positioning, overspill rim, drip-off plate, magnetic swarf collector and magnetic cleaning scraper</p> <p></p>

032.324

5/ 5

<p>"Incl. Flexible Shaft and Handpiece.</p> <p>Compact polishing machine with double-sided motor shaft. Ideal for polishing small woodturned items, delicate objects, jewellery, etc. The shaft can be equipped on the left and/or right with optional accessories such as drill chucks, grinding rollers, grinding discs, circular brushes and various cleaning and polishing discs. The ideal tool for every application with a suitable, infinitely adjustable speed range (3000-8000 rpm). Entire machine housing made of robust die-cast aluminium. 400W, 230V.</p> <p>DICTUM Polishing and Grinding Machines</p> <p>No matter which material is to be processed and which surface quality is to be achieved, with DICTUM polishing and grinding machines and the corresponding accessories, you are equipped for all tasks. From precise coarse and fine grinding of tool blades to grinding and polishing flat, profiled and organically shaped surfaces. With the appropriate accessories as well as grinding and polishing agents you can process metals, wood-based materials, natural materials, plastics, etc. until you achieve the desired result.</p> <p>Scope of delivery</p> <p></p> <p>Holding arbor with clamping flange </p> <p>Felt polishing disc </p> <p>Flexible shaft, 92 cm </p> <p>Universal handpiece UH-4, incl. chuck key </p> <p></p> <p></p> <p>o. 728811)"</p>

032.323

5/ 5

<p>Compact polishing machine with double-sided motor shaft. Ideal for polishing small woodturned items, delicate objects, jewellery, etc. The shaft can be equipped on the left and/or right with optional accessories such as drill chucks, grinding rollers, grinding discs, circular brushes and various cleaning and polishing discs. The ideal tool for every application with a suitable, infinitely adjustable speed range (3000-8000 rpm). Entire machine housing made of robust die-cast aluminium. 400W, 230V.</p> <p>DICTUM Polishing and Grinding Machines</p> <p>No matter which material is to be processed and which surface quality is to be achieved, with DICTUM polishing and grinding machines and the corresponding accessories, you are equipped for all tasks. From precise coarse and fine grinding of tool blades to grinding and polishing flat, profiled and organically shaped surfaces. With the appropriate accessories as well as grinding and polishing agents you can process metals, wood-based materials, natural materials, plastics, etc. until you achieve the desired result.</p> <p>Scope of delivery</p> <p></p> <p>2 polishing disc holders, conical </p> <p>2 cotton polishing discs, triple stitched, 75 x 10 mm </p> <p></p>

032.322

5/ 5

<p>Double grinder with 3000 rpm for universal metalworking. Whether for grinding, sharpening, deburring or polishing metal components - equipped with the right grinding wheels, the high-speed machine does the job, from shaping to polishing. rinding wheels corundum and white aluminium oxide.</p> <p>Scope of delivery</p> <p></p> <p>Protective goggles</p> <p>Diamond dresser</p> <p>White aluminium oxidewheel 150 x 25 x 12.7 mm, grit 100</p> <p>Corundum wheel 150 x 25 x 12.7 mm, grit 60</p> <p>Spark protection left and right</p> <p>Protective washers with retaining bracket left and right</p> <p>Workpiece support left and right</p> <p>Tub</p> <p>Open-end spanner</p> <p></p> <p>Centre hole 12.7 mm</p> <p>Wheel diameter 150 mm</p> <p>No load speed 2850 1/min</p> <p>Rated input 370 W</p> <p>Motor 230 V / 50 Hz</p> <p>Wheel width 25 mm</p> <p>Weight 10 kg</p> <p>Dimensions 360 x 240 x 185 mm</p> <p></p>

032.319

5/ 5

<p>This hard-bond stone is suitable for pre-sharpening double-layered blades as well as chrome-vanadium steel and HSS.</p> <p>Fits models 2000-2006, T-7, and T-8.</p> <p>Centre hole 12 mm</p> <p>Grit 220</p> <p>Ø 250 mm</p> <p>Width 50 mm</p> <p></p>

032.030

5/ 5

<p>For the diamond stone dresser.</p> <p>Grinding jigs and accessories are suitable for all models (T-3, T-4, T-7 and T-8) unless otherwise noted.</p> <p></p>

032.028

5/ 5

<p>For regrading and dressing Tormek sharpening stones.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p></p>

032.027

5/ 5

<p>Sharpening the complex tip geometry of a drill by hand requires plenty of practice. Using the Tormek drill bit sharpener attachment, you can now sharpen a 4-facet drill bit with the usual wet working sharpening method on your drill for maximum precision and service life. The optimum point and clearance angles can be set for any drilling operation with regard to the size of the drill and the material to be worked on. Even drills which are completely blunt and have their tips broken off can be returned to the perfect shape through sharpening. Point angles 90-150°.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p>Ø 3-22 mm</p> <p></p>

032.021

5/ 5

<p>For leather honing wheels</p> <p>70 g.</p> <p></p>

032.020

5/ 5

<p>Blade length min. 160 mm.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p>Model SVM-140</p> <p>Width 140 mm</p> <p></p>

032.018

5/ 5

<p>For short gouges and V-blades. Blade length min. 45 mm, blade width max. 38 mm.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p></p>

032.013

5/ 5

<p>Blade length min. 60 mm.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p>Model SVM-45</p> <p>Width 45 mm</p> <p></p>

032.011

5/ 5

<p>TORMEK T-8 Original takes precision and stability to a completely new level. The new design integrates the previously mounted sleeves for the vertical and horizontal support into the revolutionary fully cast top and frame. The enhanced stability optimizes jig guidance and thus the sharpening accuracy.</p> <p>""Tormek Original"" sharpening wheel (SG-250), aluminium oxide, Ø 250 x 50 mm, grit 220; leather honing wheel, Ø 215 x 30 mm; universal support, finely adjustable (can be used horizontally or vertically). 230 V, 200 W, 90 rpm, torque 14.7 Nm, 14.8 kg.</p> <p>Includes:</p> <p>Square Edge Jig (SE-77)</p> <p>Adjustable Trueing Tool (TT-50)</p> <p>Stone Grader (SP-650)</p> <p>Pro Angle Master (WM-200)</p> <p>Honing Compound (PA-70)</p> <p>Handbook (HB-10)</p> <p>Instruction Video (DVD-1)</p> <p>Edge Marker (EM-15)</p> <p>Voucher for free participation in a one-day workshop of your choice or a discount of €100 for a multi-day workshop.</p> <p>Comes with Tormek manual in German language.</p> <p>Tormek Sharpening System</p> <p>Proven for many years and constantly perfected wet working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.</p> <p>The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The offset front end can also be used for flat honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.</p> <p>A summary of the advantages of Tormek sharpening machines</p> <p>Longer working life of T-8 and T-4 Original:</p> <p>Stainless steel spindle with EzyLock-System for easier stone assembling</p> <p>Solid zinc cast housing with integrated vertical and horizontal support</p> <p>Better motor insulation</p> <p></p> <p>Additional advantages of T-8 Original:</p> <p>Electrophoretic dip painted casing, zinc cast housing frame and robust ABS plastic sides for better corrosion protection</p> <p>Silent running, maintenance free motor, designed for continuous operation, 25 000 hour life</p> <p>Improved water container with screw lift for easy positioning, overspill rim, drip-off plate, magnetic swarf collector and magnetic cleaning scraper</p> <p></p>

032.010

5/ 5

<p class="MsoNormal">NEW! Ultimate precision, solid zinc-cast top</p> <p class="MsoNormal">The TORMEK T-4 Original, an advanced version of the T-3 model, takes precision and stability to a new level. Both the vertical and horizontal bases for the universal support and the integrated carrying handle are made in the same zinc casting and therefore permanently joined together. The motor and main shaft are fixed to the cast top, resulting in a solid construction which significantly improves accuracy during sharpening.</p> <p class="MsoNormal">""Tormek Original"" sharpening wheel, grit 220, Ø 200 x 40 mm; leather honing wheel Ø 145 x 26 mm; solid zinc casting top with universal support with fine adjustment (horizontal and vertical settings). Impact-resistant ABS plastic housing. 230 V, 120 W, 120 rpm, 8 kg.</p> <p class="MsoNormal">Includes:</p> <p class="MsoNormal">Stone grader (SP-650)</p> <p class="MsoNormal">Pro Angle Master (WM-200)</p> <p class="MsoNormal">Honing compound (PA-70)</p> <p class="MsoNormal">Handbook (HB-10)</p> <p class="MsoNormal">Instruction video (DVD-1)</p> <p class="MsoNormal">Edge marker (EM-15)</p> <p class="MsoNormal">Voucher for free participation in a one-day workshop of your choice or a discount of €100 for a multi-day workshop</p> <p class="MsoNormal">Comes with Tormek manual in German language.</p> <p class="MsoNormal">Tormek Sharpening System</p> <p class="MsoNormal">Proven for many years and constantly perfected wet working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.</p> <p class="MsoNormal">The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The offset front end can also be used for flat honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.</p> <p class="MsoNormal">A summary of the advantages of Tormek sharpening machines</p> <p class="MsoNormal">Longer working life of T-8 and T-4 Original:</p> <p class="MsoNormal">Stainless steel spindle with EzyLock-System for easier stone assembling</p> <p class="MsoNormal">Solid zinc cast housing with integrated vertical and horizontal support</p> <p class="MsoNormal">Better motor insulation</p> <p class="MsoNormal"></p> <p class="MsoNormal">Additional advantages of T-8 Original:</p> <p class="MsoNormal">Electrophoretic dip painted casing, zinc cast housing frame and robust ABS plastic sides for better corrosion protection</p> <p class="MsoNormal">Silent running, maintenance free motor, designed for continuous operation, 25 000 hour life</p> <p class="MsoNormal">Improved water container with screw lift for easy positioning, overspill rim, drip-off plate, magnetic swarf collector and magnetic cleaning scraper</p> <p></p> <p></p>

032.007

5/ 5

<p>For plane blades and paring chisels. Also suitable for Japanese chisels. Slightly convex cutting shapes can also be sharpened using two setting wheels (included with T-8).</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p></p>

032.009

5/ 5

<p class="MsoNormal"><span lang="en-us" xml:lang="en-us">For honing and polishing the inside of turning tools, gouges and V-shaped tools, interchangeable wheels.</span></p> <p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</span></p> <p></p>

032.006

5/ 5

<p>For hollow gouges and turning tools, as well as interchangeable cutters for hollowing tools etc., up to 36 mm wide. Adjustable in cutting angle and shape. With the SVD-186 R Gouge Jig, you will get an exact replication of both the shape and edge angle on your bowl gouges and spindle gouges, so you can be sure that the tool will behave in the same predictable way on the lathe after every sharpening. Used correctly and together with your Tormek tool sharpener, there is no alternative method that can give you faster or sharper results.</p> <p>The jig can be set for various lengths of the side bevel. Mount your cutter onto the special shaft that is included with the jig, and you get a controlled sharpening.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p></p>

032.008

5/ 5

<p>As a supplement, this jig, which can be rotated in any direction, is designed for sharpening turning and profile gouges. The angle can be accurately adjusted using the hole matrix. Notches on the back indicate the set angle. Max. intake Ø 19 mm.</p> <p>The Oneway sharpening system was specially designed for woodturning tools but, with its two different jigs, is also suitable for chisels and plane blades as well as other tools. The arm is fitted to a double-wheeled grinder using a base system (fits all common models).</p> <p></p>

032.337

5/ 5

<p>Thanks to the wide flat rest with adjustable angle, this system is suitable for scrapers and parting tools as well as chisels and plane blades. Includes a left and right base with eccentric locking mechanism, arm rest and flat rest. Flat rest 126 x 76 mm.</p> <p>The Oneway sharpening system was specially designed for woodturning tools but, with its two different jigs, is also suitable for chisels and plane blades as well as other tools. The arm is fitted to a double-wheeled grinder using a base system (fits all common models).</p> <p></p>

032.336

5/ 5

<p>This hard-bond stone is suitable for pre-sharpening double-layered blades as well as chrome-vanadium steel and HSS.</p> <p>Fits models 1200-1206, T-3, and T-4.</p> <p>Centre hole 12 mm</p> <p>Grit 220</p> <p>Ø 200 mm</p> <p>Width 40 mm</p> <p></p>

032.029

5/ 5

032.354