Guitar Making

Active filters

  • ,
    5/ 5
    <p>Gluing clamp for guitar-making. Low depth to prevent bending of the thin plates while gluing the center-joint.</p> <p>Summit Guitar Tools</p> <p>Summit has developed into a strong brand in guitar making in recent years and stands for first-class quality combined with maximum efficiency.</p> <p>These tools, developed by guitar builders, are specific and require little or no rework, and offer many advantages in terms of time savings, durability and ergonomics.</p> <p>Material Steel</p> <p>Instrument Guitar</p> <p>Jaw opening 500 mm</p> <p>Jaw depth 30 mm</p> <p>Length 625 mm</p> <p></p>
    030.248
    Summit Center-Joint Gluing Clamp, Guitar Summit Clamps

    Summit Center-Joint Gluing Clamp, Guitar

    €90.16
  • ,
    5/ 5
    <p>This tool should be used together with the Ibex Splint Cutter to precisely form a tapered splint for inserting into splint groove in the guitar top.</p> <p>Brass body, hex wrench included.</p> <p></p>
    046.035
    Ibex Splint Former Ibex Guitar Making

    Ibex Splint Former

    €76.97
  • ,
    5/ 5
    <p>Most common repair of a crack of a guitar top is by inserting a tapered splint. The Ibex splint cutter executes an angled cut to form a tapered groove for a splint.</p> <p>Brass body, steel blade.</p> <p></p>
    046.034
    Ibex Splint Cutter Ibex Guitar Making

    Ibex Splint Cutter

    €74.51
  • ,
    5/ 5
    <p>String projection over individual frets is an essential parameter of the instrument set-up.</p> <p>String Projection Gauges</p> <p>The gauge is designed to measure the projection of the string (gap between the bottom of the string and the fingerboard surface or fret top).</p> <p>The use is simple, in two steps:</p> <p>1. Placing the gauge over the string in desired position, letting the gauge finger to tap the string and reset the digital indicator to zero.</p> <p>2. Pressing the string towards the fingerboard or fret with the gauge finger and read the value.</p> <p></p>
    046.033
    String Projection Gauge, Guitar  Guitar Making

    String Projection Gauge, Guitar

    €76.97
  • ,
    5/ 5
    <p>Simple and fast chamfering of the excess length of the fret and precise chamfering of the fret ends to a 35° angle. Wooden body with two different angles 35/90° and a plastic handle.</p> <p>For use with files Summit.</p> <p>Simple and quick assembly by inserting the required file and tightening the two screws in the wooden body with a screwdriver.</p> <p>Adhesive tape is optionally recommended to protect the frets during the working process.</p> <p>Width 60 mm</p> <p>Length 160 mm</p> <p>Fits all Summit Fret End Files</p> <p></p>
    046.030
    Summit Handle for Fret Bevelling Files Summit Guitar Making

    Summit Handle for Fret Bevelling Files

    €26.97
  • ,
    5/ 5
    <p>Stainless steel frets</p> <p>The special hardening allows for flawless processing of the stainless steel frets and for a long service life compared to standard files.</p> <p>File to be used with handle for chamfering the excess length of the fret end and chamfering the fret end bevels.</p> <p>Width 9 mm</p> <p>Thickness 2 mm</p> <p>Length 150 mm</p> <p>Fits Stainless steel frets</p> <p></p>
    046.029
    Summit Fret End File, Stainless Steel Frets Summit Guitar Making

    Summit Fret End File, Stainless Steel Frets

    €30.25
  • ,
    5/ 5
    <p>Nickel-silver frets</p> <p>File to be used with handle for chamfering the excess length of the fret end and chamfering the fret end bevels.</p> <p>Width 9 mm</p> <p>Thickness 2 mm</p> <p>Length 150 mm</p> <p>Fits Nickel-silver frets</p> <p></p>
    046.028
    Summit Fret End File, Standard Summit Guitar Making

    Summit Fret End File, Standard

    €26.97
  • ,
    5/ 5
    <p>Triangular file with tough wooden handle for chamfering fret ends. The special hardening enables perfect work on stainless steel frets and is more durable than conventional files. The rounded tips prevent filing into the fingerboard. Optimum geometry and ergonomics make working on the fret ends easy and comfortable.</p> <p>Sweep length 30 mm</p> <p>Length 187 mm</p> <p></p>
    046.027
    Summit Fret End File, Triangular Summit Guitar Making

    Summit Fret End File, Triangular

    €40.90
  • ,
    5/ 5
    <p>Working surface made of a special foam for non-slip working on guitars. The soft and smooth surface prevents damage to the painted surface. Environmentally friendly dyes were used to colour the foam, not UV-resistant, no discolourations.</p> <p>550 x 450 x 15 mm</p> <p>Summit Guitar Tools</p> <p>Summit has developed into a strong brand in guitar making in recent years and stands for first-class quality combined with maximum efficiency.</p> <p>These tools, developed by guitar builders, are specific and require little or no rework, and offer many advantages in terms of time savings, durability and ergonomics.</p> <p></p>
    046.022
    Summit Work Pad, Foam Summit Guitar Making

    Summit Work Pad, Foam

    €14.67
  • ,
    5/ 5
    <p>Ergonomic pliers for quick and precise removal of the frets from the fingerboard. Hardened jaws (58 HRC) allow an optimal grip on the frets. Individual frets can be easily removed within five seconds without damaging the fingerboard.</p> <p>Not suitable for cutting.</p> <p>Summit Guitar Tools</p> <p>Summit has developed into a strong brand in guitar making in recent years and stands for first-class quality combined with maximum efficiency.</p> <p>These tools, developed by guitar builders, are specific and require little or no rework, and offer many advantages in terms of time savings, durability and ergonomics.</p> <p>Length 205 mm</p> <p></p>
    046.021
    Summit Fret Puller Summit Guitar Making

    Summit Fret Puller

    €45.82
  • ,
    5/ 5
    <p>Robust and height-adjustable (6 positions) wooden neck support. Non-slip feet and cork pad. Foldable for easy storage.</p> <p>Ideal aid for various types of assembly work, but also for changing the strings, cleaning the fingerboard, polishing the frets or lubricating saddles.</p> <p>Summit Guitar Tools</p> <p>Summit has developed into a strong brand in guitar making in recent years and stands for first-class quality combined with maximum efficiency.</p> <p>These tools, developed by guitar builders, are specific and require little or no rework, and offer many advantages in terms of time savings, durability and ergonomics.</p> <p></p>
    046.020
    Summit Neck Rest, Guitar Summit Guitar Making

    Summit Neck Rest, Guitar

    €38.44
  • ,
    5/ 5
    <p>Very lightweight (only 50 g), foldable mirror for looking inside the guitar.</p> <p>Remove the transparent protective films before use.</p> <p>Summit Guitar Tools</p> <p>Summit has developed into a strong brand in guitar making in recent years and stands for first-class quality combined with maximum efficiency.</p> <p>These tools, developed by guitar builders, are specific and require little or no rework, and offer many advantages in terms of time savings, durability and ergonomics.</p> <p>Thickness 0.7 mm</p> <p>Length 25 mm</p> <p></p>
    046.019
    Summit Inspection Mirror, Foldable Summit Guitar Making

    Summit Inspection Mirror, Foldable

    €16.31
  • ,
    5/ 5
    <p>Concave, curved precision file for rounding fret crowns off after trueing.</p> <p>Total length 200 mm</p> <p>narrow = fret crowns up to 1.7 mm (mandolin, ukulele)</p> <p>medium = fret crowns up to 2.2 mm (acoustic and electric guitar)</p> <p>Jumbo = fret crowns up to 2.8 mm (bass).</p> <p>Made in Japan</p> <p>Sweep length 100 mm</p> <p></p>
    046.006
    Uo-Chikyu Fret File Uo-Chikyu Guitar Making

    Uo-Chikyu Fret File

    €34.34
  • ,
    5/ 5
    <p>Concave, curved precision file for rounding fret crowns off after trueing.</p> <p>Total length 200 mm</p> <p>narrow = fret crowns up to 1.7 mm (mandolin, ukulele)</p> <p>medium = fret crowns up to 2.2 mm (acoustic and electric guitar)</p> <p>Jumbo = fret crowns up to 2.8 mm (bass).</p> <p>Made in Japan</p> <p>Sweep length 100 mm</p> <p></p>
    046.005
    Uo-Chikyu Fret Files, 3-Piece Set Uo-Chikyu Guitar Making

    Uo-Chikyu Fret Files, 3-Piece Set

    €87.62
  • ,
    5/ 5
    <p>Gluing center-joints of a thin top or back can be a tricky task. This jig holds the center-joint aligned during gluing process.</p> <p>Summit Guitar Tools</p> <p>Summit has developed into a strong brand in guitar making in recent years and stands for first-class quality combined with maximum efficiency.</p> <p>These tools, developed by guitar builders, are specific and require little or no rework, and offer many advantages in terms of time savings, durability and ergonomics.</p> <p>Material Steel</p> <p>Clamping fixture Aluminium</p> <p>Instrument Guitar</p> <p>Jaw opening 0-25 mm</p> <p>Jaw depth 60 mm</p> <p>Length 280 mm</p> <p></p>
    030.240
    Summit Center-Joint Adjustment Jig, Guitar Summit Clamps

    Summit Center-Joint Adjustment Jig, Guitar

    €67.95
  • ,
    5/ 5
    <p>Traditional tool for gluing the guitar bridge. Usable for all acoustic guitars. Aluminium body.</p> <p></p> <p>Jaw opening 40 mm</p> <p>Jaw depth 150 mm</p> <p></p>
    030.236
    Ibex Guitar Bridge Clamp Ibex Guitar Making

    Ibex Guitar Bridge Clamp

    €42.54
  • ,
    5/ 5
    <p>Fret rocker tool is traditionally used for pin-pointing of outstanding frets, which might cause fret-buzz. The tool has four different, precision ground edges, which can work on all fretted instrument fretboards.</p> <p>Summit Guitar Tools</p> <p>Summit has developed into a strong brand in guitar making in recent years and stands for first-class quality combined with maximum efficiency.</p> <p>These tools, developed by guitar builders, are specific and require little or no rework, and offer many advantages in terms of time savings, durability and ergonomics.</p> <p>Material Stainless Steel</p> <p>Instrument Guitar</p> <p>Thickness 1.5 mm</p> <p></p>
    027.049
    Summit Fret Rocker, Guitar Summit Guitar Making

    Summit Fret Rocker, Guitar

    €22.87
  • ,
    5/ 5
    046.037
    String Winder drill-bit, Guitar  Guitar Making

    String Winder drill-bit, Guitar

    €7.30
  • ,
    5/ 5
    046.036
    String Winder for Guitar, Heriba Heriba Guitar Making

    String Winder for Guitar, Heriba

    €4.02
  • ,
    5/ 5
    <p>Protective adhesive tape made of Teflon, self adhesive, reusable.</p> <p>For protecting the frets during the use of fret end files.</p> <p>Material Teflon</p> <p>Width 5 mm</p> <p>Thickness 0.25 mm</p> <p>Length 5 m</p> <p></p>
    046.031
    Summit Protective Tape Summit Guitar Making

    Summit Protective Tape

    €16.31
  • ,
    5/ 5
    <p>Recommended for polishing varnished surfaces.</p> <p>Sanding and polishing pad for finishing the wood surface.</p> <p></p> <p>Width 75 mm</p> <p>Grit white = smooth</p> <p>Length 150 mm</p> <p>Height 45 mm</p> <p></p>
    046.026
    Summit Abrasive/Polishing Pad, Smooth/White Summit Guitar Making

    Summit Abrasive/Polishing Pad, Smooth/White

    €2.04
  • ,
    5/ 5
    <p>Recommended for shaping round edges.</p> <p>Sanding and polishing pad for finishing the wood surface.</p> <p>Width 75 mm</p> <p>Grit black = coarse</p> <p>Length 90 mm</p> <p>Height 40 mm</p> <p></p>
    046.023
    Summit Abrasive/Polishing Pad, Coarse/Black Summit Guitar Making

    Summit Abrasive/Polishing Pad, Coarse/Black

    €1.63
  • ,
    5/ 5
    <p>High-quality Japanese file with a fine cut on both sides for finishing fret ends.</p> <p>Ideal tool for refining fret ends and corners after working with triangular file.</p> <p>160 x 3 x 2 mm</p> <p>Made in Japan</p> <p></p>
    046.018
    Uo-Chikyu Fret End File Uo-Chikyu Guitar Making

    Uo-Chikyu Fret End File

    €12.30
  • ,
    5/ 5
    <p>SIZE TABLE:</p> <p>RADIUS: 0.010 ""- THICKNESS: 0.25 mm</p> <p>RADIUS: 0.013 ""- THICKNESS: 0.33 mm</p> <p>RADIUS: 0.016 ""- THICKNESS: 0.41 mm</p> <p>RADIUS: 0.024 ""- THICKNESS: 0.61 mm</p> <p>RADIUS: 0.032 ""- THICKNESS: 0.81 mm</p> <p>RADIUS: 0.036 ""- THICKNESS: 0.91 mm</p> <p>RADIUS: 0.042 ""- THICKNESS: 1.07 mm</p> <p>RADIUS: 0.046 ""- THICKNESS: 1.17 mm</p> <p>RADIUS: 0.056 ""- THICKNESS: 1.42 mm</p> <p></p> <p>Saddle files with a slim V-profile and precise radius will finish the saddle groove slightly opened on sides. The opened groove ensures correct sliding movement of the string on its sides. Also the profile of the file gives more thickness in the middle of the file, making it stable and easy for use. Japanese quality product.</p> <p>Uo-Chikyu Saddle Files</p> <p>Made in Japan</p> <p></p> <p>LENGTH: 110mm</p> <p></p>
    046.009
    Uo-Chikyu Saddle File Uo-Chikyu Guitar Making

    Uo-Chikyu Saddle File

    €17.13
  • ,
    5/ 5
    <p>Recommended for polishing varnished surfaces.</p> <p>Sanding and polishing pad for finishing the wood surface.</p> <p></p> <p>Width 75 mm</p> <p>Grit blue = fine</p> <p>Length 150 mm</p> <p>Height 45 mm</p> <p></p>
    046.025
    Summit Abrasive/Polishing Pad, Fine/Blue Summit Guitar Making

    Summit Abrasive/Polishing Pad, Fine/Blue

    €2.04
  • ,
    5/ 5
    <p>Sanding and polishing pad for finishing the wood surface.</p> <p></p> <p>Width 75 mm</p> <p>Grit green = medium</p> <p>Length 150 mm</p> <p>Height 45 mm</p> <p></p>
    046.024
    Summit Abrasive/Polishing Pad, Medium/Green Summit Guitar Making

    Summit Abrasive/Polishing Pad, Medium/Green

    €2.04
  • ,
    5/ 5
    <p>This tool is designed to measure the straightness of fretboards, which is their ability to remain straight and uniform so that the strings can play without strange indentations and without rubbing on protruding parts.</p> <p>The ruler is made of steel, a durable and resistant material that does not easily deform. The edges are precisely milled and polished, ensuring accurate measurement of the straightness of the fretboards. In addition, the grooves on the ruler are designed to fit most fret models, allowing for greater versatility of the tool.</p> <p>Using this ruler, luthiers can check whether the fretboard is straight or whether it has curves or irregularities that can affect the quality of the sound produced by the guitar. A too curved fretboard, for example, can cause intonation problems and make it difficult to play certain notes. On the other hand, a too straight fretboard can cause annoying rubbing and noises during playability.</p> <p>The steel ruler with precisely milled, polished, and grooved edges is therefore a very useful and important tool for ensuring a straight and uniform fretboard on any guitar model. Its precision and ability to adapt to different fret shapes make it a must-have for luthiers working on guitars.</p> <p>Material: Steel</p> <p>Width: 39 mm</p> <p>Thickness: 5 mm</p> <p>Length: 475 mm</p> <p></p>
    046.001
    Fretboard Straight Edge, Notched, Guitar  Home

    Fretboard Straight Edge, Notched, Guitar

    €37.62
  • ,
    5/ 5
    <p>This small circle cutter/punch is a versatile tool that can be used to cut veneers, drill guitar sound holes, leather, paper, cardboard, and much more. The set comes with a centering tip and four sharpenable blades, provided in a convenient storage case (knob). This tool is equipped with an aluminum support with a graduated scale and a quick adjustment knob, for greater precision in processing.</p> <p>The cutting diameter of the small circle cutter/punch ranges from 40 to 120 mm, allowing for precise and uniform cuts on a wide range of materials. This tool is essential for luthiers and craftsmen looking for a versatile and high-quality option for their precision work.</p>
    046.040
    Hole Cutter with Knob Handle, Small GL Guitar Making

    Hole Cutter with Knob Handle, Small

    €29.43
  • ,
    5/ 5
    <p>Precise rulers for marking of fret positions on a guitar fretboard. After cutting a groove for the nut fret, the ruler is secured in the position and marks for frets are made in the precisely cut notches on both sides of the ruler. Available for the most common scales.</p> <p>Material Stainless Steel</p> <p>Width 30 mm</p> <p>Thickness 1.2 mm</p> <p>Length 540 mm</p> <p></p>
    046.041
    Fretting Ruler, Guitar GL Guitar Making

    Fretting Ruler, Guitar

    €20.41
  • ,
    5/ 5
    <p>For quick fixing of loose frets.</p> <p>This handsome tool fits perfectly between guitar strings and thanks to the specially developed head shape, it prevents them from getting damaged while hammering and smoothing on the guitar fret itself. Available with three different crown profiles routed in the setter head for narrow, medium or Jumbo frets.</p> <p>Summit Guitar Tools</p> <p>Summit has developed into a strong brand in guitar making in recent years and stands for first-class quality combined with maximum efficiency.</p> <p>These tools, developed by guitar builders, are specific and require little or no rework, and offer many advantages in terms of time savings, durability and ergonomics.</p> <p></p> <p>Material: Brass</p> <p></p> <p></p> <p></p>
    046.002
    Summit Fret Setter Summit Guitar Making

    Summit Fret Setter

    €22.05