Saws & Accessories

Active filters

  • ,
    5/ 5
    020.406
    HOSCO Flexible Flush-Cutting Saw 120mm HOSCO Saws & Accessories

    HOSCO Flexible Flush-Cutting Saw 120mm

    €27.40
  • ,
    5/ 5
    020.405
    HOSCO Peg-hole Saw, 74mm HOSCO Saws

    HOSCO Peg-hole Saw, 74mm

    €19.90
  • ,
    5/ 5
    020.404
    Lama di ricambio per Dozuki DICTUM Universal extra fine 240 Dictum Saws & Accessories

    Lama di ricambio per Dozuki DICTUM Universal extra fine 240

    €22.90
  • ,
    5/ 5
    <p>For mobile use or maximum control in detail cuts across and along the grain. Two handle versions available:</p> <p>Light and breathable traditional wooden handle, wrapped in rattan</p> <p>Very robust and slip-proof rubberised Power Grip</p> <p>Ryoba Saws</p> <p>With its two different tooth patterns, the Ryoba saw ensures optimum cutting performance not only across but also along the grain, making it the most versatile saw for carpentry and joinery. The thicker saw blade allows backless control and thus cuts of any depth flush to the surface. Because the teeth become successively finer from the tip to the tang, it is easy to start a cut and less force is required as the stroke progresses.</p> <p>Features of an original DICTUM Japanese saw - made in Japan!</p> <p>Rust protection and reduced friction</p> <p>thanks to cutting edge surface plating technology (inexpensive saws are usually only lacquered, leading to increased friction in the saw kerf!)</p> <p>Backlash-free saw blade guidance</p> <p>for excellent cutting precision</p> <p>Stainless steel blade holder</p> <p>rust protection, no varnish and increased bending stiffness of the back of the blade</p> <p>Individually impulse-hardened tooth tips</p> <p>for equal hardness of all teeth and thus long-lasting sharpness</p> <p>Perfect deburring of the teeth</p> <p>for reduced sawing forces</p> <p>Uniform set of saw teeth and absolutely straight teeth</p> <p>for drift-free sawing.</p> <p>Blade length 180 mm</p> <p>Overall length 395 mm</p> <p>Blade width 60 mm</p> <p>Handle version Traditional Grip</p> <p>Blade thickness 0.5 mm</p> <p>Setting 0.8 mm</p> <p>Crosscut teeth 1.5 mm</p> <p>Rip teeth 2.7-3.7 mm</p>
    020.378
    DICTUM Ryoba Compact 180, Traditional Grip  Saws & Accessories

    DICTUM Ryoba Compact 180, Traditional Grip

    €36.90
  • ,
    5/ 5
    <p><strong>Original Japanese saw at an entry-level price. With fixed saw blade (non-replaceable).</strong></p> <p>Ryoba Saws</p> <p>With its two different tooth patterns, the Ryoba saw ensures optimum cutting performance not only across but also along the grain, making it the most versatile saw for carpentry and joinery. The thicker saw blade allows backless control and thus cuts of any depth flush to the surface. Because the teeth become successively finer from the tip to the tang, it is easy to start a cut and less force is required as the stroke progresses.</p> <p>Blade length 240 mm</p> <p>Overall length 600 mm</p> <p>Blade width 100 mm</p> <p>Blade thickness 0.6 mm</p> <p>Setting 0.8 / 0.9 mm</p> <p>Crosscut teeth 1.6 mm</p> <p>Rip teeth 2.5–3.8 mm</p>
    020.377
    Hattori Ryoba 240  Saws & Accessories

    Hattori Ryoba 240

    €28.10

    Original Japanese saw at an entry-level price. With fixed saw blade (non-replaceable).

  • ,
    5/ 5
    <p>Fine saw with reinforced back for fret wire grooves in guitar fretboards. The unset crosscut teeth allow tear-free, straight cuts across the grain. Cedar wood handle.</p> <p>Deluxe Saws</p> <p><strong>Handmade - for the highest demands</strong></p> <p>Our handmade master saws for the highest demands provide unparalleled control, surprising balance and the finest kerfs. The handles are made of light kiri wood and wrapped in rattan.</p> <p>All saws are made by hand in numerous steps</p> <p>The blades are made from vacuum-melted White Paper Steel for maximum edge life</p> <p>Each blade is straightened manually with a straightening hammer and hand-engraved by the master himself</p> <p>Through-hardened blade:</p> <p>Allows resharpening by hand</p> <p>If used correctly, these saws will serve you for life</p> <p>The saw blades are hollowed by hand over the whole blade width to ensure the optimum blade thickness at each point of the blade:</p> <ul> <li>Ultimate flexibility and stability of the blade</li> <li>Ensures smooth, frictionless cutting</li> <li>Creates the cleanest cuts</li> </ul> <p> </p> <p>Material: YSS Special Steel (Yasuki Specialty Steel)</p> <p>Total length: 325 mm</p> <p>Blade length: 120 mm</p> <p>Cutting width: 0.57 mm</p> <p>Perforation spacing: 1.07mm</p> <p>Back Saw Only</p> <p>Rectangular "Cross Cut Blade" type reinforced on the upper part to ensure greater stability</p> <p>Interchangeable wooden handle</p> <p>Made in Japan</p>
    020.376
    Fret Saw Deluxe  Saws & Accessories

    Fret Saw Deluxe

    €84.90
  • ,
    5/ 5
    <p><strong>For cuts across the grain.</strong></p> <p>Kataba saws</p> <p>Because of their thicker blades, the backless Kataba saws are very robust and allow deep cuts flush to the surface. They are available with different blade lengths and tooth spacings and are thus highly versatile in cabinetmaking and carpentry.</p> <p>Blade length 265 mm</p> <p>Overall length 600 mm</p> <p>Blade width 60 mm</p> <p>Blade thickness 0.6 mm</p> <p>Setting 0.9 mm</p> <p>Crosscut teeth 1.7 mm</p>
    020.375
    Hattori Kataba 265, crosscut  Saws & Accessories

    Hattori Kataba 265, crosscut

    €31.90
  • ,
    5/ 5
    <p>Ryoba 240 (Nr. 020.377) for rip cuts and trimming cuts of any depth; with fixed sawblade (non-replaceable)</p> <p>Kataba 265 (Nr. 020.375) for cuts across the grain in softwoods and hardwoods as well</p> <p></p>
    020.374
    Hattori 2-Piece Saw Set  Saws & Accessories

    Hattori 2-Piece Saw Set

    €58.90
  • ,
    5/ 5
    <p>The opposing rip cut and crosscut teeth are suitable for blind mid-panel cuts, grooves and sliding dovetail joints. Short blade, curved tooth tips.</p> <p><strong>Handmade Saw</strong></p> <p>Our handmade master saws offer unparalleled control, surprising balance and the finest kerfs. Handles made of light Yamagiri wood, wrapped with rattan on the top.</p> <p>All saws are made by hand in numerous steps </p> <p>Use of SK5 steel for long edge life</p> <p>Each blade is straightened manually with a straightening hammer.</p> <p>The saw blades are hollowed by hand over the whole blade width to ensure the optimum blade thickness at each point of the blade:</p> <ul> <li>Ultimate flexibility and stability of the blade</li> <li>Ensures smooth, frictionless cutting</li> <li>Produces the cleanest cuts</li> </ul> <p></p> <p>Blade length 90 mm</p> <p>Overall length 405 mm</p> <p>Blade width 65 mm</p> <p>Blade thickness 0.45 mm</p> <p>Setting 0.7 / 0.85 mm</p> <p>Crosscut teeth 1.67 mm</p> <p>Rip teeth 3.3 mm</p>
    020.373
    Azebiki Saw 90  Saws & Accessories

    Azebiki Saw 90

    €38.90
  • ,
    5/ 5
    <p>Professional Kugihiki with flexible blade. Traditional design with wooden handle wrapped in rattan.</p> <p>Flush Cutting Saws</p> <p>Japanese flush cutting saws are ideal for cutting dowels, pegs, tenons etc. flush to the surface of the piece without damaging its surface. Flexible blades with un-set teeth, limited cutting depth.</p> <p>Blade length 180 mm</p> <p>Overall length 355 mm</p> <p>Blade width 35 mm</p> <p>Blade thickness 0.5 mm</p> <p>Crosscut teeth 1.4 mm</p>
    020.371
    Flush-Cutting Saw Kugihiki 180  Saws & Accessories

    Flush-Cutting Saw Kugihiki 180

    €22.90
  • ,
    5/ 5
    <p>Premium design with perfect balance and high stability. The Swiss-made coping saw frame allows precise and effortless cutting. Perfect for intarsia, mother-of-pearl or goldsmith work and other artisan and precise mechanical applications. Suitable for max. blade width 1.15 mm. Comes without blade.</p> <p>Adjustable frame up to 150 mm clamping length</p> <p>Patented blade clamping mechanism for fast changing of blades</p> <p>Non-slip plastic grip</p> <p></p> <p>Blade length 130 mm</p> <p>Jaw depth 100 mm</p> <p>Weight 170 g</p>
    020.370
    Grobet Coping Saw 100  Saws & Accessories

    Grobet Coping Saw 100

    €38.90
  • ,
    5/ 5
    <p>Premium design with perfect balance and high stability. The Swiss-made coping saw frame allows precise and effortless cutting. Perfect for intarsia, mother-of-pearl or goldsmith work and other artisan and precise mechanical applications. Suitable for max. blade width 1.15 mm. Comes without blade.</p> <p>Adjustable frame up to 150 mm clamping length</p> <p>Patented blade clamping mechanism for fast changing of blades</p> <p>Non-slip plastic grip</p> <p></p> <p>Blade length 130 mm</p> <p>Jaw depth 75 mm</p> <p>Weight 150 g</p>
    020.369
    Grobet Coping Saw 75  Saws & Accessories

    Grobet Coping Saw 75

    €36.90
  • ,
    5/ 5
    <p>This classic European hand saw with high-performance Japanese blade allows precise cutting at high speed.</p> <p>The teeth are designed to cut primarily on the »push stroke«, but are also specially ground to cut on the »pull stroke« as well</p> <p>Raker teeth prevent the saw from clogging and keep it true</p> <p>Hard-chromed (rustproof) blade</p> <p>Teeth can be resharpened </p> <p>Screwed-on hardwood handle</p> <p>Blade length 330 mm</p> <p>Blade width 35-120 mm</p> <p>Blade thickness 0.8 mm</p> <p>ppi 12</p> <p>Setting 1.05 mm</p> <p>Crosscut teeth 2 mm</p> <p>Overall length 420 mm</p> <p></p>
    020.368
    Turbo-Cut Panel Saw 330  Saws & Accessories

    Turbo-Cut Panel Saw 330

    €72.90
  • ,
    5/ 5
    <p>Simple flush cutting saw with hardwood handle.</p> <p>Flush Cutting Saws</p> <p>Japanese flush cutting saws are ideal for cutting dowels, pegs, tenons etc. flush to the surface of the piece without damaging its surface. Flexible blades with un-set teeth, limited cutting depth.</p> <p>Blade length 150 mm</p> <p>Overall length 305 mm</p> <p>Blade width 30 mm</p> <p>Blade thickness 0.5 mm</p> <p>Crosscut teeth 1.2 mm</p>
    020.367
    Flush Cutting Saw Mini Kugihiki 150  Saws & Accessories

    Flush Cutting Saw Mini Kugihiki 150

    €16.90
  • ,
    5/ 5
    <p>Extra fine tooth spacing</p> <p>Back saw with fine rip teeth that cut on the push stroke, especially for dovetail joints and small mortise and tenon joints. The extra-thin saw blade allows efficient and clean cuts. The minimum set makes it easier to saw a straight line. 14° rake angle.</p> <p>These saws, which are made in Canada, have a saw blade with high carbon content. The solid back, moulded from a high-tech material incorporating stainless steel powder, fibre glass and a polymer resin binder, ensures good balance and controlled cutting. To provide more stability, the back extends over the handle. The varnished precious wood handle is secured with a stainless steel bolt and brass screw.</p> <p>Blade length 230 mm</p> <p>Overall length 360 mm</p> <p>Cut depth 40 mm</p> <p>Blade thickness 0.5 mm</p> <p>Setting 0.7 mm</p> <p>Triangular teeth for rip cuts 1,3 mm</p> <p>ppi 21</p> <p>tpi 20</p>
    020.366
    Veritas Dovetail Saw, Fine  Saws & Accessories

    Veritas Dovetail Saw, Fine

    €89.90
  • ,
    5/ 5
    <p>Back saw with fine rip teeth that cut on the push stroke, especially for dovetail joints and small mortise and tenon joints. The extra-thin saw blade allows efficient and clean cuts. The minimum set makes it easier to saw a straight line. 14° rake angle.</p> <p>These saws, which are made in Canada, have a saw blade with high carbon content. The solid back, moulded from a high-tech material incorporating stainless steel powder, fibre glass and a polymer resin binder, ensures good balance and controlled cutting. To provide more stability, the back extends over the handle. The varnished precious wood handle is secured with a stainless steel bolt and brass screw.</p> <p>Blade length 230 mm</p> <p>Overall length 360 mm</p> <p>Cut depth 40 mm</p> <p>Blade thickness 0.5 mm</p> <p>Setting 0.7 mm</p> <p>Triangular teeth for rip cuts 1.8 mm</p> <p>ppi 15</p> <p>tpi 14</p>
    020.365
    Veritas Dovetail Saw, Standard  Saws & Accessories

    Veritas Dovetail Saw, Standard

    €92.90
  • ,
    5/ 5
    <p>Small saw that cuts on the pull stroke for fine detail work in model-building, musical instrument making and restoration work. Unset saw blade with reinforced back.</p> <p>Blade length 165 mm</p> <p>Overall length 290 mm</p> <p>Cut depth 30 mm</p> <p>Blade thickness 0.3 mm</p> <p>Triangular teeth for crosscuts 0.9 mm</p>
    020.364
    Back Saw for Hardwood 165  Saws & Accessories

    Back Saw for Hardwood 165

    €28.90
  • ,
    5/ 5
    <p>Triangular files with round edges for sharpening European-style saws. The round edges maintain the slightly rounded gullet between the saw’s teeth and thus prevent cracks between the teeth (sharp angles crack more easily than curved transitions).</p> <p>Cut 2</p> <p>Cut length 150 mm</p> <p>Width 13 mm</p>
    020.363
    F.D. Triangular Saw Files, Regular, Width 13 mm  Saws & Accessories

    F.D. Triangular Saw Files, Regular, Width 13 mm

    €6.90
  • ,
    5/ 5
    <p>Triangular files with round edges for sharpening European-style saws. The round edges maintain the slightly rounded gullet between the saw’s teeth and thus prevent cracks between the teeth (sharp angles crack more easily than curved transitions).</p> <p>Cut 2</p> <p>Cut length 200 mm</p> <p>Width 12 mm</p>
    020.362
    F.D. Triangular Saw Files, Slim, Width 12 mm  Saws & Accessories

    F.D. Triangular Saw Files, Slim, Width 12 mm

    €9.90
  • ,
    5/ 5
    <p>Triangular files with round edges for sharpening European-style saws. The round edges maintain the slightly rounded gullet between the saw’s teeth and thus prevent cracks between the teeth (sharp angles crack more easily than curved transitions).</p> <p>Cut 2</p> <p>Cut length 150 mm</p> <p>Width 9 mm</p>
    020.361
    F.D. Triangular Saw Files, Slim, Width 9 mm  Saws & Accessories

    F.D. Triangular Saw Files, Slim, Width 9 mm

    €6.90
  • ,
    5/ 5
    <p>Lima triangolare con angoli arrotondati per la riaffilatura delle seghe europee. L'arrotondamento dei bordi permette la limatura di una base del dente leggermente arrotondato, impedendo così crepe nella base del dente (gli spigoli sono più inclini alla fessurazione rispetto ai passaggi arrotondati).</p> <p>Taglio 2</p> <p>Lunghezza di taglio 150 mm</p> <p>Larghezza 7,5 mm</p>
    020.359
    F.D. Triangular Saw Files, Extra-Slim, Width 7.5 mm  Saws & Accessories

    F.D. Triangular Saw Files, Extra-Slim, Width 7.5 mm

    €5.90
  • ,
    5/ 5
    <p>Fine-toothed back saw for exact and efficient rip cuts. Ultra-smooth and clean cuts thanks to extra-fine kerfs. Rip teeth that cut on the push stroke for dovetail joints or cutting small mortise and tenon joints. Rake angle 14°.</p> <p>These saws, which are made in Canada, have an extra-thin saw blade with a high carbon content. The solid back, moulded from a high-tech material incorporating stainless steel powder, fibre glass and a polymer resin binder, ensures good balance and controlled cutting. To provide more stability, the spine extends over the tang. Varnished precious wood handle.</p> <p>Blade length 200 mm</p> <p>Overall length 345 mm</p> <p>Cut depth 42 mm</p> <p>Blade thickness 0.4 mm</p> <p>Setting 0.55 mm</p> <p>Triangular teeth for rip cuts 1,3 mm</p> <p>ppi 21</p> <p>tpi 20</p>
    020.355
    Veritas Gent's Saw, Rip Cut  Saws & Accessories

    Veritas Gent's Saw, Rip Cut

    €72.90
  • ,
    5/ 5
    <p>Fine crosscut teeth that cut on the push stroke for extra-fine cuts across the grain. The ultra-smooth and clean cuts make this saw ideal for cutting tenons, halved joints and trimming small workpieces. Rake angle 15°.</p> <p>These saws, which are made in Canada, have an extra-thin saw blade with a high carbon content. The solid back, moulded from a high-tech material incorporating stainless steel powder, fibre glass and a polymer resin binder, ensures good balance and controlled cutting. To provide more stability, the spine extends over the tang. Varnished precious wood handle.</p> <p>Blade length 200 mm</p> <p>Overall length 345 mm</p> <p>Cut depth 42 mm</p> <p>Blade thickness 0.4 mm</p> <p>Setting 0.55 mm</p> <p>Triangular teeth for crosscuts 1.3 mm</p> <p>ppi 23</p> <p>tpi 22</p>
    020.354
    Veritas Gent's Saw, Crosscut  Saws & Accessories

    Veritas Gent's Saw, Crosscut

    €70.90
  • ,
    5/ 5
    <p>Diamond-shaped precision files for sharpening Japanese saw blades without tip-hardened teeth (Deluxe saws with full-hardened, non-exchangeable blades). Single cut.</p> <p>Cut fine</p> <p>Cut length 100 mm</p> <p>Cross section 3 mm</p> <p>Width 20 mm</p>
    020.353
    Saw File, Cut Length 100 mm  Saws & Accessories

    Saw File, Cut Length 100 mm

    €18.90
  • ,
    5/ 5
    <p>Diamond-shaped precision files for sharpening Japanese saw blades without tip-hardened teeth (Deluxe saws with full-hardened, non-exchangeable blades). Single cut.</p> <p>Cut Very Fine</p> <p>Cut length 75 mm</p> <p>Cross section 2.5 mm</p> <p>Width 17 mm</p>
    020.352
    Saw File, Cut Length 100 mm  Saws & Accessories

    Saw File, Cut Length 100 mm

    €16.90
  • ,
    5/ 5
    <p>Saw file with wear-resistant, diamond-coated surface, ideal for very hard, tip-hardened teeth.</p> <p>Cut length 100 mm</p> <p>Cross section 2.8 mm</p> <p>Width 20 mm</p>
    020.351
    Diamond Saw File  Saws & Accessories

    Diamond Saw File

    €39.90
  • ,
    5/ 5
    <p>Plastic clip-on saw blade guard.</p> <p>Overall length 600 mm</p>
    020.350
    Protective Guard for Saw Blades  Saws & Accessories

    Protective Guard for Saw Blades

    €2.90
  • ,
    5/ 5
    <p>Knife file for sharpening fine saws. </p> <p>Cut 3</p> <p>Cut length 110 mm</p> <p>Width 5 mm</p>
    020.349
    F.D. Fine Saw File  Saws & Accessories

    F.D. Fine Saw File

    €12.90
  • ,
    5/ 5
    <p>Whether in the workshop, on the building site or on the go, the impulse-hardened tooth tips of the high-quality quick-change blade ensure excellent cutting performance in wood and particle boards. When required, the saw blade can be replaced quickly and easily with conventional cutter blades.</p> <p>Blade length 110 mm</p> <p>Blade width 18 mm</p> <p>Blade thickness 0.45 mm</p> <p>Overall length 230 mm</p> <p>Setting 0.5 mm</p> <p>Crosscut teeth 1.3 mm</p>
    020.348
    Cutter Saw 110  Saws & Accessories

    Cutter Saw 110

    €16.90
  • ,
    5/ 5
    <p>For all rip cuts, such as mortise and tenon joints. With its teeth that cut on the push stroke, this large tenon saw cuts extremely well and 100 mm deep.</p> <p>The largest Veritas saw to date</p> <p>This saw, which is made in Canada, has an extra-thin saw blade with a high carbon content. The solid back, moulded from a high-tech material incorporating stainless steel powder, fibre glass and a polymer resin binder, ensures good balance and controlled cutting. To provide more stability, the spine extends over the tang. In addition, the closed-grip D-shaped handle allows excellent control, despite the large size of the saw. The varnished precious wood handle is secured with a stainless steel bolt and brass screw.</p> <p>Blade length 410 mm</p> <p>Overall length 540 mm</p> <p>Cut depth 100 mm</p> <p>Blade thickness 0.6 mm</p> <p>Setting 0.75 mm</p> <p>Triangular teeth for rip cuts 2,8 mm</p> <p>ppi 10</p> <p>tpi 9</p>
    020.347
    Veritas Rip Tenon Saw  Saws & Accessories

    Veritas Rip Tenon Saw

    €156.90
  • ,
    5/ 5
    <p>For trimming large wood sections and cutting tenon shoulders. The medium-fine rip teeth cut on the push stroke and ensure precise, clean cuts across the grain.</p> <p>The largest Veritas saw to date</p> <p>This saw, which is made in Canada, has an extra-thin saw blade with a high carbon content. The solid back, moulded from a high-tech material incorporating stainless steel powder, fibre glass and a polymer resin binder, ensures good balance and controlled cutting. To provide more stability, the spine extends over the tang. In addition, the closed-grip D-shaped handle allows excellent control, despite the large size of the saw. The varnished precious wood handle is secured with a stainless steel bolt and brass screw.</p> <p>Blade length 410 mm</p> <p>Overall length 540 mm</p> <p>Cut depth 100 mm</p> <p>Blade thickness 0.6 mm</p> <p>Setting 0.75 mm</p> <p>Triangular teeth for crosscuts 2.1 mm</p> <p>ppi 13</p> <p>tpi 12</p>
    020.346
    Veritas Crosscut Tenon Saw  Saws & Accessories

    Veritas Crosscut Tenon Saw

    €156.90
  • ,
    5/ 5
    <p>Back saw with fine triangular teeth that cut on the push stroke for extra-fine cuts across the grain. The ultra-smooth and clean cuts make this saw ideal for cutting tenons, halved joints and trimming small workpieces. Rake angle 15°. Pistol-type handle.</p> <p>These saws, which are made in Canada, have a saw blade with a high carbon content. The solid back, moulded from a high-tech material incorporating stainless steel powder, fibre glass and a polymer resin binder, ensures good balance and controlled cutting. To provide more stability, the spine extends over the tang. The varnished precious wood handle is secured with a stainless steel bolt and a brass screw.</p> <p>Blade length 230 mm</p> <p>Overall length 360 mm</p> <p>Cut depth 40 mm</p> <p>Blade thickness 0.5 mm</p> <p>Setting 0.55 mm</p> <p>Triangular teeth for crosscuts 1.3 mm</p> <p>ppi 23</p> <p>tpi 22</p>
    020.345
    Veritas Gent's Saw, Crosscut, with Pistol-type Handle  Saws & Accessories

    Veritas Gent's Saw, Crosscut, with Pistol-type Handle

    €101.90
  • ,
    5/ 5
    <p>Ideal for precise curves and recesses.</p> <p>Compass Saws</p> <p>With long, slender Japanese blades for making holes and curved cuts and working in confined spaces. Also suitable for thicker branches or trimming bonsai.</p> <p>Blade length 180 mm</p> <p>Overall length 310 mm</p> <p>Blade width 6-14 mm</p> <p>Blade thickness 1.0 mm</p> <p>Setting 1.3 mm</p> <p>Universal teeth 3.4 mm</p>
    020.344
    Keyhole Saw 180  Saws & Accessories

    Keyhole Saw 180

    €13.90
  • ,
    5/ 5
    <p>Unbeatable along the grain - Thanks to the triangular tooth pattern, this Kataba produces particularly good results when cutting in the direction of the grain. The teeth, which get finer towards the handle, make it easier to start a cut and less force is required as the stroke progresses.</p> <p>Kataba Saws</p> <p>Because of their thicker blades, the backless Kataba saws are very robust and allow deep cuts flush to the surface. They are available with different blade lengths and tooth spacings and are thus highly versatile in cabinetmaking and carpentry.</p> <p>Blade length 250 mm</p> <p>Overall length 580 mm</p> <p>Blade width 60 mm</p> <p>Blade thickness 0.5 mm</p> <p>Setting 0.6 mm</p> <p>Rip teeth 2.2-3.4 mm</p>
    020.343
    Z-Saw Kataba 250, Rip Cut  Saws & Accessories

    Z-Saw Kataba 250, Rip Cut

    €35.90
  • ,
    5/ 5
    <p>Western-style mini-Kataba - For fine, tear-free cuts. With ergonomic pistol-type handle.</p> <p>For maximum control in detail work</p> <p>Ideal for working with a saw guide set</p> <p>Kataba Saws</p> <p>Because of their thicker blades, the backless Kataba saws are very robust and allow deep cuts flush to the surface. They are available with different blade lengths and tooth spacings and are thus highly versatile in cabinetmaking and carpentry.</p> <p>Blade length 175 mm</p> <p>Overall length 300 mm</p> <p>Blade width 47 mm</p> <p>Blade thickness 0.5 mm</p> <p>Setting 0.65 mm</p> <p>Crosscut teeth 1.5 mm</p>
    020.342
    Z-Saw Kataba Mini 175, Crosscut  Saws & Accessories

    Z-Saw Kataba Mini 175, Crosscut

    €17.90
  • ,
    5/ 5
    <p>Because of the fine crosscut teeth and the minimum set, this saw produces smooth, clean and tear-free cuts across the grain.</p> <p>Kataba Saws</p> <p>Because of their thicker blades, the backless Kataba saws are very robust and allow deep cuts flush to the surface. They are available with different blade lengths and tooth spacings and are thus highly versatile in cabinetmaking and carpentry.</p> <p>Blade length 250 mm</p> <p>Overall length 580 mm</p> <p>Blade width 60 mm</p> <p>Blade thickness 0.5 mm</p> <p>Setting 0.65 mm</p> <p>Crosscut teeth 1.4 mm</p>
    020.341
    Z-Saw Kataba 250, Crosscut  Saws & Accessories

    Z-Saw Kataba 250, Crosscut

    €37.90
  • ,
    5/ 5
    <p>Faster, more precise sawing - For long cuts on large workpieces, boards and beams in carpentry.</p> <p>Curved edge:</p> <p>Better clearing of the kerf - no clogging</p> <p>Long cuts can be started precisely, simply by shifting pressure</p> <p>Kataba Saws</p> <p>Because of their thicker blades, the backless Kataba saws are very robust and allow deep cuts flush to the surface. They are available with different blade lengths and tooth spacings and are thus highly versatile in cabinetmaking and carpentry.</p> <p>Blade length 265 mm</p> <p>Overall length 600 mm</p> <p>Blade width 60 mm</p> <p>Blade thickness 0.6 mm</p> <p>Setting 0.85 mm</p> <p>Crosscut teeth 1.8 mm</p>
    020.340
    Z-Saw Kataba Alpha 265, Crosscut  Saws & Accessories

    Z-Saw Kataba Alpha 265, Crosscut

    €35.90
  • ,
    5/ 5
    <p>For especially fine-cut surfaces - Due to the fine crosscut teeth and the minimum setting, this saw produces smooth, clean and tear-free cuts across the grain. Wooden handle made of lightweight yet very sturdy paulownia wood, without handle wrapping.</p> <p>Kataba Saws</p> <p>This backless Kataba saws have a thicker blade for an extremely rugged design allowing deep cuts entirely parallel to the surface. They are available in different blade lengths and tooth pitches and are therefore of versatile use in carpentry and joinery trades.</p> <p>Blade length 225 mm</p> <p>Overall length 525 mm</p> <p>Blade width 60 mm</p> <p>Blade thickness 0.4 mm</p> <p>Setting 0.56 mm</p> <p>Crosscut teeth 1.2 mm</p>
    020.339
    Z-Saw Kataba Me 225, Crosscut  Saws & Accessories

    Z-Saw Kataba Me 225, Crosscut

    €38.90
  • ,
    5/ 5
    <p>Small flush cutting saw for flush cuts without damaging surfaces. Replaceable blade, hard-chromed. Lightweight plastic handle. Double cutting edge.</p> <p>Flush Cutting Saws</p> <p>Japanese flush cutting saws are ideal for cutting dowels, pegs, tenons etc. flush to the surface of the piece without damaging its surface. Flexible blades with un-set teeth, limited cutting depth.</p> <p>Blade length 150 mm</p> <p>Overall length 300 mm</p> <p>Blade width 35 mm</p> <p>Blade thickness 0.4 mm</p> <p>Crosscut teeth 1.2 / 1.5 mm</p>
    020.338
    Z-Saw Mini Kugihiki  Saws & Accessories

    Z-Saw Mini Kugihiki

    €15.90
  • ,
    5/ 5
    <p>The backless Kataba saw with a blade length of 300 mm is mainly intended for carpentry work. Although this saw is designed for crosscuts due to its trapezoidal toothing, a special form of tooth grinding also allows it to be used for cuts along the grain.</p> <p>Kataba Saws</p> <p>This backless Kataba saws have a thicker blade for an extremely rugged design allowing deep cuts entirely parallel to the surface. They are available in different blade lengths and tooth pitches and are therefore of versatile use in carpentry and joinery trades.</p> <p>Blade length 300 mm</p> <p>Overall length 660 mm</p> <p>Blade width 65 mm</p> <p>Blade thickness 0.7 mm</p> <p>Setting 1.07 mm</p> <p>Crosscut teeth 2.15 mm</p> <p></p>
    020.337
    Z-Saw Kataba Universal 300 with Trapezoidal Teeth  Saws & Accessories

    Z-Saw Kataba Universal 300 with Trapezoidal Teeth

    €39.90
  • ,
    5/ 5
    <p>Although this saw is designed for cross cuts due to its trapezoidal toothing, a special form of tooth grinding also allows it to be used for cuts along the grain.</p> <p>Kataba Saws</p> <p>Due to their stronger blades, the backless Kataba saws are very robust and make deep, long or flush cuts in solid or glued wood or composite material. Like all Japanese saws, Kataba saws work on the pull stroke and are therefore especially energy-efficient. Kataba are offered in different blade lengths and tooth spacing for versatile use in cabinetmaking and carpentry.</p> <p>Blade length 250 mm</p> <p>Overall length 580 mm</p> <p>Blade width 60 mm</p> <p>Blade thickness 0.5 mm</p> <p>Setting 0.7 mm</p> <p>Crosscut teeth 1.4 mm</p> <p></p>
    020.336
    Z-Saw Kataba Universal 250 with Trapezoidal Teeth  Saws & Accessories

    Z-Saw Kataba Universal 250 with Trapezoidal Teeth

    €33.90
  • ,
    5/ 5
    <p>The blade lenght (265 mm) makes this saw ideal for use in carpentry or joining. With light and breathable wooden handle.</p> <p>Kataba Saws</p> <p>Because of their thicker blades, the backless Kataba saws are very robust and allow deep cuts flush to the surface. They are available with different blade lengths and tooth spacings and are thus highly versatile in cabinetmaking and carpentry.</p> <p>Blade length 265 mm</p> <p>Overall length 595 mm</p> <p>Blade width 60 mm</p> <p>Blade thickness 0.6 mm</p> <p>Setting 0.92 mm</p> <p>Crosscut teeth 1.75 mm</p> <p></p>
    020.335
    Z-Saw Kataba Super Hard 265  Saws & Accessories

    Z-Saw Kataba Super Hard 265

    €28.90
  • ,
    5/ 5
    <p>Robust, universal saw for deep cuts across and along the grain on hardwood and softwood.</p> <p>Ryoba Saws</p> <p>With its two different tooth patterns, the Ryoba saw ensures optimum cutting performance not only across but also along the grain, making it the most versatile saw for carpentry and joinery. The thicker saw blade allows backless control and thus cuts of any depth flush to the surface. Because the teeth become successively finer from the tip to the tang, it is easy to start a cut and less force is required as the stroke progresses.</p> <p>Blade length 250 mm</p> <p>Overall length 585 mm</p> <p>Blade width 83 mm</p> <p>Blade thickness 0.5 mm</p> <p>Setting 0.7 / 0.7 mm</p> <p>Crosscut teeth 1.4 mm</p> <p>Rip teeth 1.4-2.9 mm</p> <p></p>
    020.334
    Z-Saw Ryoba 250  Saws & Accessories

    Z-Saw Ryoba 250

    €42.90
  • ,
    5/ 5
    <p>Handy saw for crosscuts and shoulder cuts on small objects. A special tooth at the tip of the blade allows the saw to be used also for mid-panel cuts.</p> <p>Dozuki Saws</p> <p>Dozuki saws are indispensable for cutting wood joints and making precise crosscuts and shoulder cuts. The ultra-thin and fine-toothed saw blade allows precise, tear-free cuts and the finest kerfs. The reinforced back stabilises the blade and makes it less susceptible to breakage, but also limits the possible cutting depth.</p> <p>Dozuki saws with universal tooth pattern are especially suited for making dovetails and other wood joints.</p> <p>Blade length 150 mm</p> <p>Overall length 370 mm</p> <p>Cut depth 30 mm</p> <p>Blade thickness 0.3 mm</p> <p>Setting 0.45 mm</p> <p>Crosscut teeth 1.4 mm</p> <p></p>
    020.333
    Z-Saw Dozuki Mini 150, Crosscut  Saws & Accessories

    Z-Saw Dozuki Mini 150, Crosscut

    €38.90
  • ,
    5/ 5
    <p>Smallest Dozuki for delicate work - Ideal for crosscuts in model-building or restoration work.</p> <p>Minimum set for smooth, clean cuts</p> <p>Wooden handle without wrapping</p> <p>Dozuki Saws</p> <p>Dozuki saws are indispensable for cutting wood joints and making precise crosscuts and shoulder cuts. The ultra-thin and fine-toothed saw blade allows precise, tear-free cuts and the finest kerfs. The reinforced back stabilises the blade and makes it less susceptible to breakage, but also limits the possible cutting depth.</p> <p>Dozuki saws with universal tooth pattern are especially suited for making dovetails and other wood joints.</p> <p>Blade length 150 mm</p> <p>Overall length 370 mm</p> <p>Cut depth 30 mm</p> <p>Blade thickness 0.3 mm</p> <p>Setting 0.35 mm</p> <p>Crosscut teeth 1 mm</p> <p></p>
    020.332
    Z-Saw Dozuki Mini Fine 150, Crosscut  Saws & Accessories

    Z-Saw Dozuki Mini Fine 150, Crosscut

    €44.90
  • ,
    5/ 5
    <p>For mobile use or maximum control in detail work.</p> <p>Specially developed for hardwoods. Although the trapezoidal teeth pattern makes this saw ideal for cuts across the grain, the more robust tooth design also allows for short cuts along the grain. For this reason, it can also be used for dovetail (rip cuts) joints.</p> <p>Dozuki Saws</p> <p>Dozuki saws are indispensable for cutting wood joints and making precise crosscuts and shoulder cuts. The ultra-thin and fine-toothed saw blade allows precise, tear-free cuts and the finest kerfs. The reinforced back stabilises the blade and makes it less susceptible to breakage, but also limits the possible cutting depth.</p> <p>Dozuki saws with universal tooth pattern are especially suited for making dovetails and other wood joints.</p> <p>less </p> <p>Blade length 150 mm</p> <p>Overall length 375 mm</p> <p>Cut depth 35 mm</p> <p>Blade thickness 0.3 mm</p> <p>Setting 0.5 mm</p> <p>Crosscut teeth 1.2 mm</p> <p></p>
    020.331
    Z-Saw Dozuki for Hardwood 150  Saws & Accessories

    Z-Saw Dozuki for Hardwood 150

    €35.90
  • ,
    5/ 5
    <p>Standard length for general use and larger stock.</p> <p>Specially developed for hardwoods. Although the trapezoidal teeth pattern makes this saw ideal for cuts across the grain, the more robust tooth design also allows for short cuts along the grain. For this reason, it can also be used for dovetail (rip cuts) joints.</p> <p>Dozuki Saws</p> <p>Dozuki saws are indispensable for cutting wood joints and making precise crosscuts and shoulder cuts. The ultra-thin and fine-toothed saw blade allows precise, tear-free cuts and the finest kerfs. The reinforced back stabilises the blade and makes it less susceptible to breakage, but also limits the possible cutting depth.</p> <p>Blade length 240 mm</p> <p>Overall length 530 mm</p> <p>Cut depth 50 mm</p> <p>Blade thickness 0.3 mm</p> <p>Setting 0.5 mm</p> <p>Crosscut teeth 1.2 mm</p> <p></p>
    020.330
    Z-Saw Dozuki for Hardwood 240  Saws & Accessories

    Z-Saw Dozuki for Hardwood 240

    €50.90
  • ,
    5/ 5
    <p>This compact Japanese saw with two different tooth spacings and an ultra-thin blade is the first choice for the finest cuts in tight spaces and cutting off dowels or other projecting wooden parts flush with the surface. Beech handle.</p> <p>Flush-Cutting Saws</p> <p>Japanese flush-cutting saws are ideal for cutting dowels, pegs, tenons etc. flush to the surface of the piece without damaging its surface. Flexible blades with un-set teeth, limited cutting depth.</p> <p>Blade length 125 mm</p> <p>Overall length 270 mm</p> <p>Blade width 30 mm</p> <p>Blade thickness 0.3 mm</p> <p>Crosscut teeth 1 / 1.3 mm</p> <p></p>
    020.329
    Ryoba Restauro 125  Saws & Accessories

    Ryoba Restauro 125

    €24.70
  • ,
    5/ 5
    <p>The diamond particles embedded in the blade allow this saw to be used for cutting the hardest materials like steel, stone, ceramic, or glass in any direction.</p> <p></p>
    020.328
    Replacement Blade for Freeway Diamond Saw  Saws & Accessories

    Replacement Blade for Freeway Diamond Saw

    €20.90
  • ,
    5/ 5
    <p>The diamond particles embedded in the blade allow this saw to be used for cutting the hardest materials like steel, stone, ceramic, or glass in any direction. Comes with one diamond saw blade Ø 1.6 mm and one conventional blade Ø 1 mm.</p> <p>Freeway</p> <p>Robust steel frames for high torsion resistance</p> <p>Saw blade easy to hook into the sockets</p> <p>Blade tightened and released by turning the handle</p> <p>Blade length 165 mm</p> <p>Jaw depth 120 mm</p> <p>Weight 190 g</p> <p></p>
    020.327
    Freeway Diamond Saw  Saws & Accessories

    Freeway Diamond Saw

    €27.90
  • ,
    5/ 5
    <p>Due to their compact size, these saws fit into almost any toolbox. The Dozuki Universal Compact is great for cutting across, along or diagonal to the grain. The reinforced back allows high-precision cuts into smaller stock. Perfect for cutting dovetail and other joints. The Ryoba Compact features an unusual construction and also has much going for it. Not only deep cuts can be made with ease. Different toothings allow for rip and crosscuts. Set consists of the following articles:</p> <p></p> <p>DICTUM Dozuki Universal Compact 180, Power Grip</p> <p>DICTUM Ryoba Compact 180, Power Grip</p> <p>DICTUM Jute Tool Roll for Japanese Saws, Size 1</p> <p></p>
    020.326
    DICTUM Compact Saws, 2-Piece Set Dictum Saws & Accessories

    DICTUM Compact Saws, 2-Piece Set

    €53.90
  • ,
    5/ 5
    <p>Set consists of the following articles:</p> <p></p> <p>DICTUM Kataba Super Hard Compact 180, Power Grip</p> <p>DICTUM Dozuki Compact 180, Crosscut, Power Grip</p> <p>DICTUM Dozuki Universal Compact 180, Power Grip</p> <p>DICTUM Ryoba Compact 180, Power Grip</p> <p>DICTUM Jute Tool Roll for Japanese Saws, Size 1</p> <p></p> <p></p>
    020.325
    DICTUM Compact Saws, 4-Piece Set Dictum Saws & Accessories

    DICTUM Compact Saws, 4-Piece Set

    €111.90
  • ,
    5/ 5
    <p>This 3-piece set is a must for every tool bag  - Set consists of the following articles:</p> <p></p> <p>DICTUM Dozuki Universal Compact 180, Power Grip</p> <p>DICTUM Ryoba Compact 180, Power Grip</p> <p>DICTUM Jute Tool Roll for Japanese Saws, Size 1</p> <p>DICTUM Kataba Super Hard Compact 180, Power Grip</p> <p></p> <p></p>
    020.324
    DICTUM Compact Saws, 3-Piece Set, Power Grip Dictum Saws & Accessories

    DICTUM Compact Saws, 3-Piece Set, Power Grip

    €78.90
  • ,
    5/ 5
    <p>This 3-piece set is a must for every tool bag  Set consists of the following articles:</p> <p></p> <p>DICTUM Dozuki Universal Compact 180, Traditional Grip</p> <p>DICTUM Kataba Super Hard Compact 180, Traditional Grip</p> <p>DICTUM Ryoba Compact 180, Traditional Grip</p> <p>DICTUM Jute Tool Roll for Japanese Saws, Size 1</p> <p></p> <p></p>
    020.323
    DICTUM Compact Saws, 3-Piece Set, Traditional Grip Dictum Saws & Accessories

    DICTUM Compact Saws, 3-Piece Set, Traditional Grip

    €83.90
  • ,
    5/ 5
    <p>The right blade for each cut  - Set consists of the following articles:</p> <p></p> <p>DICTUM Dozuki Universal 240  for precise cuts across and along the grain</p> <p>DICTUM Ryoba Komane 240  for rip cuts and trimming cuts of any depth</p> <p>DICTUM Kataba Super Hard for cuts across the grain in exotic hardwoods as well as particle boards</p> <p>DICTUM Dozuki 240, crosscut for exact cuts across the grain with the highest surface quality</p> <p></p>
    020.322
    DICTUM Basic Saw Set, 4-Piece Set, Wave Grip Dictum Saws & Accessories

    DICTUM Basic Saw Set, 4-Piece Set, Wave Grip

    €170.90
  • ,
    5/ 5
    <p>The right blade for each cut  - Set consists of the following articles:</p> <p></p> <p>DICTUM Dozuki Universal 240  for precise cuts across and along the grain</p> <p>DICTUM Ryoba Komane 240 for rip cuts and trimming cuts of any depth</p> <p>DICTUM Kataba Super Hard  for cuts across the grain in exotic hardwoods as well as particle boards</p> <p>DICTUM Dozuki 240, crosscut for exact cuts across the grain with the highest surface quality</p> <p></p>
    020.321
    DICTUM Basic Saw Set, 4-Piece Set, Power Grip Dictum Saws & Accessories

    DICTUM Basic Saw Set, 4-Piece Set, Power Grip

    €145.90
  • ,
    5/ 5
    <p>The right blade for each cut  - Set consists of the following articles:</p> <p></p> <p>DICTUM Dozuki Universal 240, Wooden Handle</p> <p>DICTUM Ryoba Comane 240, Traditional Grip</p> <p>DICTUM Kataba Super Hard 240, Traditional Grip</p> <p>DICTUM Dozuki 240, Crosscut, Wooden Handle</p> <p>DICTUM Jute Tool Roll for Japanese Saws, Size 2</p> <p></p> <p></p>
    020.320
    DICTUM Basic Saw Set, 4-Piece Set, Traditional Grip Dictum Saws & Accessories

    DICTUM Basic Saw Set, 4-Piece Set, Traditional Grip

    €156.90
  • ,
    5/ 5
    <p>For universal use in cabinetmaking and carpentry, thanks to high-performance rip teeth and medium-fine trapezoidal teeth for precise cuts across the grain. Three handle versions available:</p> <p>Light and breathable traditional wooden handle, wrapped in rattan</p> <p>Oiled, anti-skid Wave Grip made of native alder wood</p> <p>Very robust and slip-proof rubberised Power Grip</p> <p>Ryoba Saws</p> <p>With its two different tooth patterns, the Ryoba saw ensures optimum cutting performance not only across but also along the grain, making it the most versatile saw for carpentry and joinery. The thicker saw blade allows backless control and thus cuts of any depth flush to the surface. Because the teeth become successively finer from the tip to the tang, it is easy to start a cut and less force is required as the stroke progresses.</p> <p>Features of an original DICTUM Japanese saw - made in Japan!</p> <p>Rust protection and reduced friction</p> <p>thanks to cutting edge surface plating technology (inexpensive saws are usually only lacquered, leading to increased friction in the saw kerf!)</p> <p>Backlash-free saw blade guidance</p> <p>for excellent cutting precision</p> <p>Stainless steel blade holder</p> <p>rust protection, no varnish and increased bending stiffness of the back of the blade</p> <p>Individually impulse-hardened tooth tips</p> <p>for equal hardness of all teeth and thus long-lasting sharpness</p> <p>Perfect deburring of the teeth</p> <p>for reduced sawing forces</p> <p>Uniform set of saw teeth and absolutely straight teeth</p> <p>for drift-free sawing.</p> <p> </p> <p>Blade length 240 mm</p> <p>Overall length 600 mm</p> <p>Blade width 97 mm</p> <p>Handle version Wave Grip</p> <p>Blade thickness 0.5 mm</p> <p>Setting 0.8 mm</p> <p>Crosscut teeth 1.7 mm</p> <p>Rip teeth 2.4-3.8 mm</p> <p></p>
    020.319
    DICTUM Ryoba Seiun 240, Wave Grip  Saws & Accessories

    DICTUM Ryoba Seiun 240, Wave Grip

    €45.00
  • ,
    5/ 5
    <p>For universal use in cabinetmaking and carpentry, thanks to high-performance rip teeth and medium-fine trapezoidal teeth for precise cuts across the grain. Three handle versions available:</p> <p>Light and breathable traditional wooden handle, wrapped in rattan</p> <p>Oiled, anti-skid Wave Grip made of native alder wood</p> <p>Very robust and slip-proof rubberised Power Grip</p> <p>Ryoba Saws</p> <p>With its two different tooth patterns, the Ryoba saw ensures optimum cutting performance not only across but also along the grain, making it the most versatile saw for carpentry and joinery. The thicker saw blade allows backless control and thus cuts of any depth flush to the surface. Because the teeth become successively finer from the tip to the tang, it is easy to start a cut and less force is required as the stroke progresses.</p> <p>Features of an original DICTUM Japanese saw - made in Japan!</p> <p>Rust protection and reduced friction</p> <p>thanks to cutting edge surface plating technology (inexpensive saws are usually only lacquered, leading to increased friction in the saw kerf!)</p> <p>Backlash-free saw blade guidance</p> <p>for excellent cutting precision</p> <p>Stainless steel blade holder</p> <p>rust protection, no varnish and increased bending stiffness of the back of the blade</p> <p>Individually impulse-hardened tooth tips</p> <p>for equal hardness of all teeth and thus long-lasting sharpness</p> <p>Perfect deburring of the teeth</p> <p>for reduced sawing forces</p> <p>Uniform set of saw teeth and absolutely straight teeth</p> <p>for drift-free sawing.</p> <p> </p> <p>Blade length 240 mm</p> <p>Overall length 600 mm</p> <p>Blade width 97 mm</p> <p>Handle version Traditional Grip</p> <p>Blade thickness 0.5 mm</p> <p>Setting 0.8 mm</p> <p>Crosscut teeth 1.7 mm</p> <p>Rip teeth 2.4-3.8 mm</p> <p></p>
    020.317
    DICTUM Ryoba Seiun 240, Traditional Grip  Saws & Accessories

    DICTUM Ryoba Seiun 240, Traditional Grip

    €41.89
  • ,
    5/ 5
    <p>The particularly fine trapezoidal teeth of this universal saw allow extremely clean cuts across the grain, the rip teeth are designed for a good cutting performance along the grain. Three handle versions available:</p> <p>Light and breathable traditional wooden handle, wrapped in rattan</p> <p>Oiled, anti-skid Wave Grip made of native alder wood</p> <p>Very robust and slip-proof rubberised Power Grip</p> <p>Ryoba Saws</p> <p>With its two different tooth patterns, the Ryoba saw ensures optimum cutting performance not only across but also along the grain, making it the most versatile saw for carpentry and joinery. The thicker saw blade allows backless control and thus cuts of any depth flush to the surface. Because the teeth become successively finer from the tip to the tang, it is easy to start a cut and less force is required as the stroke progresses.</p> <p>Features of an original DICTUM Japanese saw - made in Japan!</p> <p>Rust protection and reduced friction</p> <p>thanks to cutting edge surface plating technology (inexpensive saws are usually only lacquered, leading to increased friction in the saw kerf!)</p> <p>Backlash-free saw blade guidance</p> <p>for excellent cutting precision</p> <p>Stainless steel blade holder</p> <p>rust protection, no varnish and increased bending stiffness of the back of the blade</p> <p>Individually impulse-hardened tooth tips</p> <p>for equal hardness of all teeth and thus long-lasting sharpness</p> <p>Perfect deburring of the teeth</p> <p>for reduced sawing forces</p> <p>Uniform set of saw teeth and absolutely straight teeth</p> <p>for drift-free sawing.</p> <p></p> <p>Blade length 240 mm</p> <p>Overall length 580 mm</p> <p>Blade width 84 mm</p> <p>Handle version Wave Grip</p> <p>Blade thickness 0.45 mm</p> <p>Setting 0.7 mm</p> <p>Crosscut teeth 1.3 mm</p> <p>Rip teeth 2.4-3.8 mm</p> <p></p>
    020.316
    DICTUM Ryoba Komane 240, Wave Grip  Saws & Accessories

    DICTUM Ryoba Komane 240, Wave Grip

    €42.90
  • ,
    5/ 5
    <p>The particularly fine trapezoidal teeth of this universal saw allow extremely clean cuts across the grain, the rip teeth are designed for a good cutting performance along the grain. Three handle versions available:</p> <p>Light and breathable traditional wooden handle, wrapped in rattan</p> <p>Oiled, anti-skid Wave Grip made of native alder wood</p> <p>Very robust and slip-proof rubberised Power Grip</p> <p>Ryoba Saws</p> <p>With its two different tooth patterns, the Ryoba saw ensures optimum cutting performance not only across but also along the grain, making it the most versatile saw for carpentry and joinery. The thicker saw blade allows backless control and thus cuts of any depth flush to the surface. Because the teeth become successively finer from the tip to the tang, it is easy to start a cut and less force is required as the stroke progresses.</p> <p>Features of an original DICTUM Japanese saw - made in Japan!</p> <p>Rust protection and reduced friction</p> <p>thanks to cutting edge surface plating technology (inexpensive saws are usually only lacquered, leading to increased friction in the saw kerf!)</p> <p>Backlash-free saw blade guidance</p> <p>for excellent cutting precision</p> <p>Stainless steel blade holder</p> <p>rust protection, no varnish and increased bending stiffness of the back of the blade</p> <p>Individually impulse-hardened tooth tips</p> <p>for equal hardness of all teeth and thus long-lasting sharpness</p> <p>Perfect deburring of the teeth</p> <p>for reduced sawing forces</p> <p>Uniform set of saw teeth and absolutely straight teeth</p> <p>for drift-free sawing.</p> <p> </p> <p>Blade length 240 mm</p> <p>Overall length 580 mm</p> <p>Blade width 84 mm</p> <p>Handle version Power Grip</p> <p>Blade thickness 0.45 mm</p> <p>Setting 0.7 mm</p> <p>Crosscut teeth 1.3 mm</p> <p>Rip teeth 2.4-3.8 mm</p> <p></p>
    020.315
    DICTUM Ryoba Komane 240, Power Grip  Saws & Accessories

    DICTUM Ryoba Komane 240, Power Grip

    €35.90
  • ,
    5/ 5
    <p>The particularly fine trapezoidal teeth of this universal saw allow extremely clean cuts across the grain, the rip teeth are designed for a good cutting performance along the grain. Three handle versions available:</p> <p>Light and breathable traditional wooden handle, wrapped in rattan</p> <p>Oiled, anti-skid Wave Grip made of native alder wood</p> <p>Very robust and slip-proof rubberised Power Grip</p> <p>Ryoba Saws</p> <p>With its two different tooth patterns, the Ryoba saw ensures optimum cutting performance not only across but also along the grain, making it the most versatile saw for carpentry and joinery. The thicker saw blade allows backless control and thus cuts of any depth flush to the surface. Because the teeth become successively finer from the tip to the tang, it is easy to start a cut and less force is required as the stroke progresses.</p> <p>Features of an original DICTUM Japanese saw - made in Japan!</p> <p>Rust protection and reduced friction</p> <p>thanks to cutting edge surface plating technology (inexpensive saws are usually only lacquered, leading to increased friction in the saw kerf!)</p> <p>Backlash-free saw blade guidance</p> <p>for excellent cutting precision</p> <p>Stainless steel blade holder</p> <p>rust protection, no varnish and increased bending stiffness of the back of the blade</p> <p>Individually impulse-hardened tooth tips</p> <p>for equal hardness of all teeth and thus long-lasting sharpness</p> <p>Perfect deburring of the teeth</p> <p>for reduced sawing forces</p> <p>Uniform set of saw teeth and absolutely straight teeth</p> <p>for drift-free sawing.</p> <p></p> <p>Blade length 240 mm</p> <p>Overall length 580 mm</p> <p>Blade width 84 mm</p> <p>Handle version Traditional Grip</p> <p>Blade thickness 0.45 mm</p> <p>Setting 0.7 mm</p> <p>Crosscut teeth 1.3 mm</p> <p>Rip teeth 2.4-3.8 mm</p> <p></p>
    020.314
    DICTUM Ryoba Comane 240, Traditional Grip  Saws & Accessories

    DICTUM Ryoba Comane 240, Traditional Grip

    €39.90
  • ,
    5/ 5
    <p>The closest-ever tooth pitch of a mass-produced Japanese saw with universal teeth is 1.3 mm. The 2 tenths of a millimeter that distinguish it from the Dozuki Universal are crucial when it comes to achieving even smoother-cut surfaces. In particular, this allows the most precise hardwood joints and the highest bonding strength in glued joints.</p> <p>Dozuki Saws</p> <p>Dozuki saws are indispensable for cutting wood joints and making precise crosscuts and shoulder cuts. The ultra-thin and fine-toothed saw blade allows precise, tear-free cuts and the finest kerfs. The reinforced back stabilises the blade and makes it less susceptible to breakage, but also limits the possible cutting depth.</p> <p>Dozuki saws with universal tooth pattern are especially suited for making dovetails and other wood joints.</p> <p>Features of an original DICTUM Japanese saw - made in Japan!</p> <p>Rust protection and reduced friction</p> <p>thanks to cutting edge surface plating technology (inexpensive saws are usually only lacquered, leading to increased friction in the saw kerf!)</p> <p>Backlash-free saw blade guidance</p> <p>for excellent cutting precision</p> <p>Stainless steel blade holder</p> <p>rust protection, no varnish and increased bending stiffness of the back of the blade</p> <p>Individually impulse-hardened tooth tips</p> <p>for equal hardness of all teeth and thus long-lasting sharpness</p> <p>Perfect deburring of the teeth</p> <p>for reduced sawing forces</p> <p>Uniform set of saw teeth and absolutely straight teeth</p> <p>for drift-free sawing.</p> <p> </p> <p>Blade length 240 mm</p> <p>Overall length 600 mm</p> <p>Cut depth 55 mm</p> <p>Blade thickness 0.3 mm</p> <p>Setting 0.45 mm</p> <p>Universal teeth 1.3 mm</p> <p></p>
    020.313
    DICTUM Dozuki Universal Extra-fine 240, Traditional, Standard Wrapping  Saws & Accessories

    DICTUM Dozuki Universal Extra-fine 240, Traditional, Standard Wrapping

    €56.90
  • ,
    5/ 5
    <p>European cowhide, rivet-reinforced seams, slide-in tongue with hang-up hole.</p> <p>Model Size 3</p> <p>Blade length 270-300 mm</p> <p>Blade width max. 120 mm</p> <p></p>
    020.312
    DICTUM Leather Case for Ryoba Saws, Size 3  Saws & Accessories

    DICTUM Leather Case for Ryoba Saws, Size 3

    €25.90
  • ,
    5/ 5
    <p>European cowhide, rivet-reinforced seams, slide-in tongue with hang-up hole.</p> <p>Model Size 2</p> <p>Blade length 210-250 mm</p>
    020.311
    DICTUM Leather Case for Ryoba Saws, Size 2  Saws & Accessories

    DICTUM Leather Case for Ryoba Saws, Size 2

    €25.90
  • ,
    5/ 5
    <p>European cowhide, rivet-reinforced seams, slide-in tongue with hang-up hole.</p> <p>Model Size 1</p> <p>Blade length 150-180 mm</p>
    020.310
    DICTUM Leather Case for Ryoba Saws, Size 1 Dictum Saws & Accessories

    DICTUM Leather Case for Ryoba Saws, Size 1

    €19.90
  • ,
    5/ 5
    <p>Four compartments, natural colour.</p> <p>Model Size 3</p> <p>Blade width max. 120 mm</p> <p>Outer dimensions 740 x 740 mm</p> <p></p>
    020.309
    DICTUM Jute Tool Roll for Japanese Saws, Size 3 Dictum Saws & Accessories

    DICTUM Jute Tool Roll for Japanese Saws, Size 3

    €16.90
  • ,
    5/ 5
    <p>Four compartments, natural colour.</p> <p>Model Size 2</p> <p>Blade width max. 90 mm</p> <p>Outer dimensions 600 x 600 mm</p> <p></p>
    020.308
    Fodero arrotolabile DICTUM in iuta per seghe giapponesi, Misura 2 Dictum Saws & Accessories

    Fodero arrotolabile DICTUM in iuta per seghe giapponesi, Misura 2

    €11.90
  • ,
    5/ 5
    <p>Four compartments, natural colour.</p> <p>Model Size 1</p> <p>Blade width max. 70 mm</p> <p>Outer dimensions 400 x 400 mm</p> <p></p>
    020.307
    DICTUM Jute Tool Roll for Japanese Saws, Size 1 Dictum Saws & Accessories

    DICTUM Jute Tool Roll for Japanese Saws, Size 1

    €7.90
  • ,
    5/ 5
    <p>Extra-long saw blade for extra-wide workpieces.</p> <p>Dozuki Super Hard</p> <p>Preferred for cuts across the grain (trimming and shoulder cuts) in exotic hardwood, as well as glued wood and particle boards.</p> <p>Wear-resistant teeth, even in hardwood (exotic woods), glued joints and synthetic resins</p> <p>Curved tip also allows mid-panel cuts</p> <p>Features of an original DICTUM Japanese saw - made in Japan!</p> <p>Rust protection and reduced friction</p> <p>thanks to cutting edge surface plating technology (inexpensive saws are usually only lacquered, leading to increased friction in the saw kerf!)</p> <p>Backlash-free saw blade guidance</p> <p>for excellent cutting precision</p> <p>Stainless steel blade holder</p> <p>rust protection, no varnish and increased bending stiffness of the back of the blade</p> <p>Individually impulse-hardened tooth tips</p> <p>for equal hardness of all teeth and thus long-lasting sharpness</p> <p>Perfect deburring of the teeth</p> <p>for reduced sawing forces</p> <p>Uniform set of saw teeth and absolutely straight teeth</p> <p>for drift-free sawing.</p> <p> </p> <p>Blade length 270 mm</p> <p>Overall length 590 mm</p> <p>Cut depth 65 mm</p> <p>Blade thickness 0.3 mm</p> <p>Setting 0.45 mm</p> <p>Crosscut teeth 1.5 mm</p>
    020.306
    DICTUM Dozuki Super Hard 270 Dictum Saws & Accessories

    DICTUM Dozuki Super Hard 270

    €56.10
  • ,
    5/ 5
    <p>Practical shoulder bag with DICTUM logo. Ripstop cordura nylon with adjustable shoulder strap and compartments for at least four saws up to 75 cm in length. Two separate pockets for replacement blades. Without contents.</p> <p>Max. saw length 750 mm</p> <p>Outer dimensions 780 x 160 x 60 mm</p> <p></p>
    020.305
    DICTUM Japanese Saw Bag Dictum Saws & Accessories

    DICTUM Japanese Saw Bag

    €36.90
  • ,
    5/ 5
    <p>Standard version for all cuts along and across the grain. With light and breathable traditional wooden handle, or very robust and slip-proof rubberised Power Grip.</p> <p>Dozuki Saws</p> <p>Dozuki saws are indispensable for cutting wood joints and making precise crosscuts and shoulder cuts. The ultra-thin and fine-toothed saw blade allows precise, tear-free cuts and the finest kerfs. The reinforced back stabilises the blade and makes it less susceptible to breakage, but also limits the possible cutting depth.</p> <p>Dozuki saws with universal tooth pattern are especially suited for making dovetails and other wood joints.</p> <p>Features of an original DICTUM Japanese saw - made in Japan!</p> <p>Rust protection and reduced friction</p> <p>thanks to cutting edge surface plating technology (inexpensive saws are usually only lacquered, leading to increased friction in the saw kerf!)</p> <p>Backlash-free saw blade guidance</p> <p>for excellent cutting precision</p> <p>Stainless steel blade holder</p> <p>rust protection, no varnish and increased bending stiffness of the back of the blade</p> <p>Individually impulse-hardened tooth tips</p> <p>for equal hardness of all teeth and thus long-lasting sharpness</p> <p>Perfect deburring of the teeth</p> <p>for reduced sawing forces</p> <p>Uniform set of saw teeth and absolutely straight teeth</p> <p>for drift-free sawing.</p> <p> </p> <p>Blade length 240 mm</p> <p>Overall length 530 mm</p> <p>Cut depth 50 mm</p> <p>Handle version Power Grip</p> <p>Blade thickness 0.3 mm</p> <p>Setting 0.45 mm</p> <p>Universal teeth 1.5 mm</p>
    020.304
    DICTUM Dozuki Universal 240, Power Grip Dictum Saws & Accessories

    DICTUM Dozuki Universal 240, Power Grip

    €42.90
  • ,
    5/ 5
    <p>Standard version for all cuts along and across the grain. With light and breathable traditional wooden handle, or very robust and slip-proof rubberised Power Grip.</p> <p>Dozuki Saws</p> <p>Dozuki saws are indispensable for cutting wood joints and making precise crosscuts and shoulder cuts. The ultra-thin and fine-toothed saw blade allows precise, tear-free cuts and the finest kerfs. The reinforced back stabilises the blade and makes it less susceptible to breakage, but also limits the possible cutting depth.</p> <p>Dozuki saws with universal tooth pattern are especially suited for making dovetails and other wood joints.</p> <p>Features of an original DICTUM Japanese saw - made in Japan!</p> <p>Rust protection and reduced friction</p> <p>thanks to cutting edge surface plating technology (inexpensive saws are usually only lacquered, leading to increased friction in the saw kerf!)</p> <p>Backlash-free saw blade guidance</p> <p>for excellent cutting precision</p> <p>Stainless steel blade holder</p> <p>rust protection, no varnish and increased bending stiffness of the back of the blade</p> <p>Individually impulse-hardened tooth tips</p> <p>for equal hardness of all teeth and thus long-lasting sharpness</p> <p>Perfect deburring of the teeth</p> <p>for reduced sawing forces</p> <p>Uniform set of saw teeth and absolutely straight teeth</p> <p>for drift-free sawing.</p> <p> </p> <p>Blade length 240 mm</p> <p>Overall length 530 mm</p> <p>Cut depth 50 mm</p> <p>Handle version Wooden Handle</p> <p>Blade thickness 0.3 mm</p> <p>Setting 0.45 mm</p> <p>Universal teeth 1.5 mm</p>
    020.303
    DICTUM Dozuki Universal 240, Wooden Handle Dictum Saws & Accessories

    DICTUM Dozuki Universal 240, Wooden Handle

    €45.90
  • ,
    5/ 5
    <p>"For mobile use or maximum control in detail cuts across and along the grain. Two handle versions available:</p> <p>Light and breathable traditional wooden handle, wrapped in rattan</p> <p>Very robust and slip-proof rubberised Power Grip</p> <p>Dozuki Saws</p> <p>Dozuki saws are indispensable for cutting wood joints and making precise crosscuts and shoulder cuts. The ultra-thin and fine-toothed saw blade allows precise, tear-free cuts and the finest kerfs. The reinforced back stabilises the blade and makes it less susceptible to breakage, but also limits the possible cutting depth.</p> <p>Dozuki saws with universal tooth pattern are especially suited for making dovetails and other wood joints.</p> <p>Features of an original DICTUM Japanese saw - made in Japan!</p> <p>Rust protection and reduced friction</p> <p>thanks to cutting edge surface plating technology (inexpensive saws are usually only lacquered, leading to increased friction in the saw kerf!)</p> <p>Backlash-free saw blade guidance</p> <p>for excellent cutting precision</p> <p>Stainless steel blade holder</p> <p>rust protection, no varnish and increased bending stiffness of the back of the blade</p> <p>Individually impulse-hardened tooth tips</p> <p>for equal hardness of all teeth and thus long-lasting sharpness</p> <p>Perfect deburring of the teeth</p> <p>for reduced sawing forces</p> <p>Uniform set of saw teeth and absolutely straight teeth</p> <p>for drift-free sawing.</p> <p></p> <p>Blade length 180 mm</p> <p>Overall length 395 mm</p> <p>Cut depth 45 mm</p> <p>Handle version Traditional Grip</p> <p>Blade thickness 0.3 mm</p> <p>Setting 0.45 mm</p> <p>Universal teeth 1.5 mm"</p> <p></p>
    020.301
    DICTUM Dozuki Universal Compact 180, Traditional Grip Dictum Saws & Accessories

    DICTUM Dozuki Universal Compact 180, Traditional Grip

    €31.50
  • ,
    5/ 5
    <p>For mobile use or maximum control in detail cuts across and along the grain. Two handle versions available:</p> <p>Light and breathable traditional wooden handle, wrapped in rattan</p> <p>Very robust and slip-proof rubberised Power Grip</p> <p>Ryoba Saws</p> <p>With its two different tooth patterns, the Ryoba saw ensures optimum cutting performance not only across but also along the grain, making it the most versatile saw for carpentry and joinery. The thicker saw blade allows backless control and thus cuts of any depth flush to the surface. Because the teeth become successively finer from the tip to the tang, it is easy to start a cut and less force is required as the stroke progresses.</p> <p>Features of an original DICTUM Japanese saw - made in Japan!</p> <p>Rust protection and reduced friction</p> <p>thanks to cutting edge surface plating technology (inexpensive saws are usually only lacquered, leading to increased friction in the saw kerf!)</p> <p>Backlash-free saw blade guidance</p> <p>for excellent cutting precision</p> <p>Stainless steel blade holder</p> <p>rust protection, no varnish and increased bending stiffness of the back of the blade</p> <p>Individually impulse-hardened tooth tips</p> <p>for equal hardness of all teeth and thus long-lasting sharpness</p> <p>Perfect deburring of the teeth</p> <p>for reduced sawing forces</p> <p>Uniform set of saw teeth and absolutely straight teeth</p> <p>for drift-free sawing.</p> <p></p> <p>Blade length 180 mm</p> <p>Overall length 395 mm</p> <p>Blade width 60 mm</p> <p>Handle version Power Grip</p> <p>Blade thickness 0.5 mm</p> <p>Setting 0.8 mm</p> <p>Crosscut teeth 1.5 mm</p> <p>Rip teeth 2.7-3.7 mm</p>
    020.205
    DICTUM Ryoba Compact 180, Power Grip GYOKUCHO Saws & Accessories

    DICTUM Ryoba Compact 180, Power Grip

    €31.40
  • ,
    5/ 5
    <p>Compact Japanese saw for fine repair cuts, also ideal for working in tight spaces or cutting off dowels. The unset crosscut teeth ensure clean cuts, while the thin blade minimises kerf wastage.</p> <p>Blade length 100 mm</p> <p>Overall length 220 mm</p> <p>Blade width 20 mm</p> <p>Blade thickness 0.3 mm</p> <p>Crosscut teeth 1 mm</p>
    020.017
    Kataba Restoration Gyokucho - 100mm GYOKUCHO Saws & Accessories

    Kataba Restoration Gyokucho - 100mm

    €24.50

    Compact Japanese saw for fine repair cuts, also ideal for working in tight spaces or cutting off dowels. The unset crosscut teeth ensure clean cuts, while the thin blade minimises kerf wastage.

  • ,
    5/ 5
    <p>For mobile use or maximum control in detail cuts across and along the grain. Two handle versions available:</p> <p>Light and breathable traditional wooden handle, wrapped in rattan</p> <p>Very robust and slip-proof rubberised Power Grip</p> <p>Dozuki Saws</p> <p>Dozuki saws are indispensable for cutting wood joints and making precise crosscuts and shoulder cuts. The ultra-thin and fine-toothed saw blade allows precise, tear-free cuts and the finest kerfs. The reinforced back stabilises the blade and makes it less susceptible to breakage, but also limits the possible cutting depth.</p> <p>Dozuki saws with universal tooth pattern are especially suited for making dovetails and other wood joints.</p> <p>Features of an original DICTUM Japanese saw - made in Japan!</p> <p>Rust protection and reduced friction</p> <p>thanks to cutting edge surface plating technology (inexpensive saws are usually only lacquered, leading to increased friction in the saw kerf!)</p> <p>Backlash-free saw blade guidance</p> <p>for excellent cutting precision</p> <p>Stainless steel blade holder</p> <p>rust protection, no varnish and increased bending stiffness of the back of the blade</p> <p>Individually impulse-hardened tooth tips</p> <p>for equal hardness of all teeth and thus long-lasting sharpness</p> <p>Perfect deburring of the teeth</p> <p>for reduced sawing forces</p> <p>Uniform set of saw teeth and absolutely straight teeth</p> <p>for drift-free sawing.</p> <p> </p> <p>Blade length 180 mm</p> <p>Overall length 395 mm</p> <p>Cut depth 45 mm</p> <p>Handle version Power Grip</p> <p>Blade thickness 0.3 mm</p> <p>Setting 0.45 mm</p> <p>Universal teeth 1.5 mm</p>
    020.011
    DICTUM Dozuki Universal Compact 180, Power Grip GYOKUCHO Saws & Accessories

    DICTUM Dozuki Universal Compact 180, Power Grip

    €30.70
  • ,
    5/ 5
    <p>This small Ryoba saw is only 39 cm (15 inches) long. The crosscut teeth are laser hardened and the blade is exchangeable. Disassembled this Ryoba is only 245 mm (9-1/2 inches) long and it finds its place in the smallest toolbox. </p> <p>JAPANESE STYLE PULL SAW: This product is a “Pull Saw.” What most people are used to are European saws, which cut materials via pushing, thus are called “push saws.” On the other hand, Japanese saws cut materials via pulling and thus are called “pull saws,” which is what this product is. In comparison to “push saws,” “pull saws” are lighter in weight, requires less power, and the resulting edge is cleaner.</p> <p>JAPANESE STEEL: All Japanese saws are consisted of top quality japanese steel. It uses high quality Japanese steel, which makes cuts to be sharp.</p> <p>MADE IN JAPAN: All Ryoba Saws are 100% manufactured in Japan by Japanese master craftsmen.With a history of over 100 years in making japanese hand tools, all of the process gone into making tools were completed in one of Japan’s towns known for their craft making tradition: Sanjō in Niigata</p> <p>DIVERSIFY YOUR WOODWORKING LIFE: No matter you are a master or a beginner in using saws, it gives you brand new experience from using traditional Japanese style saws and enables you to make a wider variety of woodworking products, thus change your life!</p> <p></p>
    020.001
    Small Ryoba Japanese Saw with Replaceable Blades - 180 mm Dictum Saws & Accessories

    Small Ryoba Japanese Saw with Replaceable Blades - 180 mm

    €27.90

    This small Ryoba saw is only 39 cm (15 inches) long. One side is perfect for cutting along the grain, the other for crosscut.

  • ,
    5/ 5
    <p>Blade for the Handiwork Japanese saw (code 020.002) for all fine wood cuts in violinmaking and hobby work. For cuts across the grain. This product is a “Pull Saw.” What most people are used to are European saws, which cut materials via pushing, thus are called “push saws.” On the other hand, Japanese saws cut materials via pulling and thus are called “pull saws,” which is what this product is. In comparison to “push saws,” “pull saws” are lighter in weight, requires less power, and the resulting edge is cleaner. Blade length 150 mm. Cut depth 32 mm. Blade thickness 0.4 mm. Crosscut teeth 1.3 mm</p>
    020.006
    Replacement Blade for Handiwork - 150 mm GYOKUCHO Saws & Accessories

    Replacement Blade for Handiwork - 150 mm

    €11.90

    Blade for the Handiwork Japanese saw (code 020.002) for all fine wood cuts in violinmaking.

  • ,
    5/ 5
    <p><span lang="en-us" style="font-size:11pt;line-height:107%;font-family:Calibri, 'sans-serif';" xml:lang="en-us">Use the Pegas Super-Skip Sawblade when you want to achieve a smooth finish from an aggressive blade. Specifically designed for hard and medium-hardwoods, Super-Skip also works perfectly on Acrylic with a reduced speed. The spaces between the teeth of the Super-Skip blade are larger than the normal skip-tooth configuration. This allows the blade to cut very quickly, leaving a smooth finish. The surface sawdust is whisked away and the edge remains clean.</span></p>
    020.005
    PEGAS Fretsaw Blade Skip - Made in Switzerland Pegas Saws & Accessories

    PEGAS Fretsaw Blade Skip - Made in Switzerland

    €6.30
  • ,
    5/ 5
    <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">The frame saw Classic combines European tradition with Japanese cutting quality. The ergonomically curved cheeks and knobs are made of fine wood with accurately sanded, oiled and polished surfaces. The cedar stretcher lowers the weight of the saw and reduces vibrations.</span></p> <p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">Blade length 400 mm </span></p> <p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">Blade width 10 mm </span></p> <p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">Blade thickness 0.6 mm </span></p> <p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">Setting 0.85 mm </span></p> <p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">Crosscut teeth 1.8 mm </span></p> <p></p> <p><span lang="en-us" style="font-size:11pt;line-height:107%;font-family:Calibri, 'sans-serif';" xml:lang="en-us">Weight 550 g</span></p>
    020.003
    Frame Saw Classic 400 with Japanese "Turbo-Cut" Saw Blade Dictum Saws & Accessories

    Frame Saw Classic 400 with Japanese "Turbo-Cut" Saw Blade

    €88.90
  • ,
    5/ 5
    <p class="MsoNormal">With its great depth, this Japanese coping saw is ideal for deep cuts. Includes three replacement blades with 0.4 mm blade thickness.</p> <p class="MsoNormal">Extra-deep frame of 250 mm depth</p> <p class="MsoNormal">Saw blade is tightened by simply turning the handle</p> <p class="MsoNormal">Chrome-plated steel frame</p> <p class="MsoNormal">Holding clamps with square shaft - can be locked in four positions</p> <p class="MsoNormal">Super Pike coping saw blades can be used as replacement blades</p> <p class="MsoNormal">Blade length 130 mm</p> <p class="MsoNormal">Jaw depth 250 mm</p> <p class="MsoNormal">Weight 225 g</p> <p></p>
    020.004
    Japanese Coping Saw Dictum Saws & Accessories

    Japanese Coping Saw

    €34.90
  • ,
    5/ 5
    <p>The Kunz Straight Dovetail Saw is a fine-cut saw which cuts in both directions.  The blade is made of high carbon German steel and hardened to 62 Rockwell.</p> <p></p> <p>The teeth can be re-sharpened and re-set.</p> <p></p> <p>*Handle colour may not be exactly as shown*</p> <p></p> <p>Features:</p> <p>Reversible fine cut saw that can cut on the pull or the push stroke</p> <p>Wooden handle</p> <p>Length: 250mm </p> <p>Made in Germany</p>
    020.379
    KUNZ Dovetail Saw KUNZ Saws & Accessories

    KUNZ Dovetail Saw

    €19.50

     Fine-cut saw which cuts in both directions.

  • ,
    5/ 5
    <p>These small precisions saws made by Master Kanzawa are a revelation for musical instrument makers and cabinetmakers. The set is made up of a universal Ryoba saw with one blade each for longitudinal and cross cutting, a Dozuki saw with ultra-fine lateral-cut blade and a slim Kataba compass saw for working in restricted space or making curved cuts. The valuable tools are kept safe in a practical linen bag, which bears testimony to the quality of the content: Ichi Ban = the number one! Handles made of light Hinoki wood, bound with bamboo at the tang. Blade length 120 mm, overall length 320 mm.</p> <p>Dozuki</p> <p>Cut depth 25 mm</p> <p>Blade thickness 0.2 mm</p> <p>Setting 0.3 mm</p> <p>Crosscut teeth 1 mm</p> <p></p> <p>Ryoba</p> <p>Blade width 53 mm</p> <p>Blade thickness 0.4 mm</p> <p>Setting 0.6 mm</p> <p>Crosscut teeth 0.8 mm</p> <p>Rip teeth 2 mm</p> <p></p> <p>Compass saw</p> <p>Blade width 10 mm</p> <p>Blade thickness 1 mm</p> <p>Setting 1.4 mm</p> <p>Crosscut teeth 1.3 mm</p>
    020.372
    Fine Saws, 3-Piece Set From a Japanese master workshop  Saws & Accessories

    Fine Saws, 3-Piece Set From a Japanese master workshop

    €138.90
  • ,
    5/ 5
    <p>Triangular files with round edges for sharpening European-style saws. The round edges maintain the slightly rounded gullet between the saw’s teeth and thus prevent cracks between the teeth (sharp angles crack more easily than curved transitions).</p> <p>Cut 2</p> <p>Cut length 200 mm</p> <p>Width 8 mm</p>
    020.360
    F.D. Triangular Saw Files, Extra-Slim, Width 8 mm  Saws & Accessories

    F.D. Triangular Saw Files, Extra-Slim, Width 8 mm

    €8.90
  • ,
    5/ 5
    <p>Triangular files with round edges for sharpening European-style saws. The round edges maintain the slightly rounded gullet between the saw’s teeth and thus prevent cracks between the teeth (sharp angles crack more easily than curved transitions).</p> <p>Cut 2</p> <p>Cut length 150 mm</p> <p>Width 6 mm</p>
    020.358
    F.D. Triangular Saw Files, Double Extra-Slim, Width 6 mm  Saws & Accessories

    F.D. Triangular Saw Files, Double Extra-Slim, Width 6 mm

    €5.90
  • ,
    5/ 5
    <p>Triangular files with round edges for sharpening European-style saws. The round edges maintain the slightly rounded gullet between the saw’s teeth and thus prevent cracks between the teeth (sharp angles crack more easily than curved transitions).</p> <p>Cut 2</p> <p>Cut length 125 mm</p> <p>Width 5 mm</p>
    020.357
    F.D. Triangular Saw Files, Double Extra-Slim, Width 5 mm  Saws & Accessories

    F.D. Triangular Saw Files, Double Extra-Slim, Width 5 mm

    €5.90
  • ,
    5/ 5
    <p>Triangular files with round edges for sharpening European-style saws. The round edges maintain the slightly rounded gullet between the saw’s teeth and thus prevent cracks between the teeth (sharp angles crack more easily than curved transitions).</p> <p>Cut 2</p> <p>Cut length 100 mm</p> <p>Width 4 mm</p>
    020.356
    F.D. Triangular Saw Files, Double Extra-Slim, Width 4 mm  Saws & Accessories

    F.D. Triangular Saw Files, Double Extra-Slim, Width 4 mm

    €4.90
  • ,
    5/ 5
    <p>For universal use in cabinetmaking and carpentry, thanks to high-performance rip teeth and medium-fine trapezoidal teeth for precise cuts across the grain. Three handle versions available:</p> <p>Light and breathable traditional wooden handle, wrapped in rattan</p> <p>Oiled, anti-skid Wave Grip made of native alder wood</p> <p>Very robust and slip-proof rubberised Power Grip</p> <p>Ryoba Saws</p> <p>With its two different tooth patterns, the Ryoba saw ensures optimum cutting performance not only across but also along the grain, making it the most versatile saw for carpentry and joinery. The thicker saw blade allows backless control and thus cuts of any depth flush to the surface. Because the teeth become successively finer from the tip to the tang, it is easy to start a cut and less force is required as the stroke progresses.</p> <p>Features of an original DICTUM Japanese saw - made in Japan!</p> <p>Rust protection and reduced friction</p> <p>thanks to cutting edge surface plating technology (inexpensive saws are usually only lacquered, leading to increased friction in the saw kerf!)</p> <p>Backlash-free saw blade guidance</p> <p>for excellent cutting precision</p> <p>Stainless steel blade holder</p> <p>rust protection, no varnish and increased bending stiffness of the back of the blade</p> <p>Individually impulse-hardened tooth tips</p> <p>for equal hardness of all teeth and thus long-lasting sharpness</p> <p>Perfect deburring of the teeth</p> <p>for reduced sawing forces</p> <p>Uniform set of saw teeth and absolutely straight teeth</p> <p>for drift-free sawing.</p> <p> </p> <p>Blade length 240 mm</p> <p>Overall length 600 mm</p> <p>Blade width 97 mm</p> <p>Handle version Power Grip</p> <p>Blade thickness 0.5 mm</p> <p>Setting 0.8 mm</p> <p>Crosscut teeth 1.7 mm</p> <p>Rip teeth 2.4-3.8 mm</p> <p></p>
    020.318
    DICTUM Ryoba Seiun 240, Power Grip  Saws & Accessories

    DICTUM Ryoba Seiun 240, Power Grip

    €36.91
  • ,
    5/ 5
    <p>Fine saw for non-hardened metals and hard plastics. The rubber handle provides a comfortable and secure grip. Replaceable blade. Can also be used with blade for wood (No. 020.006).</p> <p>Blade length 150 mm</p> <p>Overall length 295 mm</p> <p>Blade width 30 mm</p> <p>Blade thickness 0.4 mm</p> <p>Setting 0.5 mm</p> <p>Triangular teeth 0.9 mm</p> <p></p>
    020.002
    Fine Japanese Handiwork Saw with replaceable Blades - 150 mm Dictum Saws & Accessories

    Fine Japanese Handiwork Saw with replaceable Blades - 150 mm

    €20.30

    Small Japanese replaceable-blade. The rubberised handle fits the hand comfortably.