carpenter's chisels with shaped blade

Choose the chisel set for carpenters, luthiers and woodworkers from the best brands. Discover our high quality gouge and chisel case.

Short and long chisels_Narex-Luban-LieNelsen-GrandiLiutaiItaliani

Chisels

  • Luban
    <h2>Shop online luban chisels</h2> <p>choose the 4 or 6 piece professional chisel sets.</p>
  • Narex
    <h2>Shop online narex richter chisels</h2> <p>choose the professional 4 or 2 piece chisel sets or the single short or diagonal chisel.</p>
  • Richter
    <p>Richter chisels</p>
  • Crown
    <h2>Shop online Crown chisels</h2>
  • Pfeil
    <h2>Shop online pfeil chisels</h2>
  • Two Cherries
    <h2>Shop online Two Cherries chisels</h2>
  • Veritas
    <h2>Shop online veritas chisels</h2>
  • D-Kumi Nomi
    <h2>Shop online D-Kumi Nomi chisels</h2>
  • Stubai
    <h2>Shop online stubai chisels</h2>
  • Henry Taylor
    <p>Shop online Henry Taylor chisels</p>
  • Hattori
    <h2>Shop online hattori chisels</h2>
  • Tataki Nomi
    <h2>Shop online Tataki nomi</h2>
  • Chisels & Gouges...
    <h2>Online sale of accessories for chisels and gouges</h2> <p>Discover the <a href="https://grandiliutai.com/en/tools/chisels/leather-tools-roll.html">high-quality leather tool roll</a></p>
  • Isi Sharp
    <h2>Shop online Isi Sharp chisels</h2>

Active filters

  • ,
    5/ 5
    <p>ideal for very precise hand cutting and paring of joints. This set comes in a card box.</p> <p></p> <p>Total length only 150 mm (6 inch)</p> <p>Blade width 6/13/19/25 mm</p> <p></p>
    025.331
    Set of 4 CROWN Butt Chisels Crown Tools Home

    Set of 4 CROWN Butt Chisels

    €122.87
  • ,
    5/ 5
    <p>An attractive feature of these chisel guards, made of soft silicone, is that they will change their shape to fit any chisel blade. As such they are not only suited for standard western chisels but also for mortise chisels and Japanese blades. In secure contact with the blade over a length of 40 mm, the guard cannot drop off or be accidentally pulled off. The set consists of two guards each for chisels 3 to 6 mm, 8 to 13 mm, 14 to 20 mm, 22 to 26 mm and 28 to 32 mm wide.</p> <p></p> <p>Applies to all chisel guards including these: chisels must be completely dry before they are stored in these silicone guards. Otherwise they will rust.</p> <p>Chisel NOT included!</p> <p></p>
    025.330
    Set of 10 silicone chisel guards GL Chisels

    Set of 10 silicone chisel guards

    €10.57
  • ,
    5/ 5
    <p>Max. handle diameter 28 mm</p> <p>Max. recommended length of tools 280 mm</p> <p>Length unrolled 33 cm</p> <p></p>
    025.322
    TWO CHERRIES leather tool roll with 12 sturdy pockets Due ciliegie Chisels

    TWO CHERRIES leather tool roll with 12 sturdy pockets

    €55.66
  • ,
    5/ 5
    <p>Max. handle diameter 28 mm</p> <p>Max. recommended length of tools 280 mm</p> <p>Length unrolled 33 cm</p> <p></p>
    025.321
    TWO CHERRIES leather tool roll with 12 sturdy transparent plastic pockets Due ciliegie Chisels

    TWO CHERRIES leather tool roll with 12 sturdy transparent plastic pockets

    €33.52
  • ,
    5/ 5
    <p>Interior diameter of pockets 26 to 27 mm</p> <p>Max. recommended length of tools 280 mm</p> <p></p>
    025.317
    TWO CHERRIES polyester fibre tool roll Due ciliegie Chisels

    TWO CHERRIES polyester fibre tool roll

    €21.23
  • ,
    5/ 5
    <p>This set of ISI SHARP chisels is a solid basic equipment for every woodworker. The carbon steel blade (T10) is hardened to 61 - 63 HRC. The ash handles are without impact ring, so that the irons can be more comfortably guided by hand or struck with the heel of the hand. Even without an impact ring, the ash handles can withstand light to medium blows with a mallet. The handles have a colorless matte finish and are slightly flattened on two sides to prevent rolling.</p> <p></p> <p>Iron widths in the set: 6, 10, 12, 16, 20, 26 mm</p> <p>Bevel angle 25°</p> <p>Total length, depending on blade width 250 to 270 mm</p> <p>Blade length measured without tang, depending on blade width 97 to 105 mm</p> <p>Handle diameter 29 mm</p> <p>In Original wooden case</p> <p></p> <p>The Patented ISI SHARP:</p> <p>The face of a chisel must be flat in order to make precise wood joints. Most woodworkers are familiar with this fact. However, you may have experienced that it is not so easy to produce or maintain such a precise face on Western chisels.</p> <p></p> <p>The face of a Western chisel is relatively long, usually between 100 and 120 mm. When the entire length of the mirror side is honed on a flat waterstone, it bumps and lifts at the transition to the tang. At this moment, the honing stone has contact with the iron only at the cutting edge and at the tang. This means that the objective of achieving a flat mirror surface is not realized. In practice, therefore, only the part of the face close to the cutting edge is honed. However, it cannot be avoided that the face of the mirror becomes rounded over time, since there is no defined end of the grinding surface towards the tang side. Precise work is therefore only possible to a limited extent.</p> <p></p> <p>Why do Japanese chisels not have this problem? The face of Japanese chisels is short, often only 60 to 70 mm. In addition, due to single or multiple hollow grinding (Ura) of the face of the chisel, the area that has to be removed is considerably reduced. The third and decisive advantage is that the tang is angled with respect to the longitudinal axis of the face of the iron. This means that the sharpening or honing stone only touches the surface of the mirror side, which is limited on all sides. The result is a permanently flat mirror side.</p> <p></p> <p>The basic idea behind the isi sharp chisels is to transfer this advantage of Japanese chisels to Western chisels.</p> <p></p> <p>First of all, the question remains to be answered as to why Japanese chisels are not used instead of Western chisels. The answer: Many Western woodworkers find the Japanese chisels too short. Not everyone likes to get used to the angled handle.</p> <p></p> <p>The face of the isi sharp chisel chisel4 is designed as a flat surface in its part close to the cutting edge up to a length of approx. 70 mm. The novel feature is that the remaining surface is recessed by 0.5 to 0.6 mm up to the tang. This means that the surface to be ground is clearly defined on all 4 sides and reduced to the length of a Japanese chisel. This also means that the result is a permanently flat face of the chisel. This invention originates from Friedrich Kollenrott and is registered as a utility model at the German Patent Office.</p> <p></p>
    025.312
    Set of 6 patented chisels ISI SHARP Friedrich Kollenrott Isi Sharp Chisels

    Set of 6 patented chisels ISI SHARP Friedrich Kollenrott

    €86.80
  • ,
    5/ 5
    025.300
    TWO CHERRIES Butt Chisels with polished blade Due ciliegie Chisels

    TWO CHERRIES Butt Chisels with polished blade

    €22.05
  • ,
    5/ 5
    <p>Consisting of:</p> <p>1 chisel with straight blade, 4 mm</p> <p>1 gouge hollow medium 12 mm</p> <p>1 paring chisel 20 mm</p> <p>1 chisel with straight blade 26 mm</p> <p>This set was designed for use at construction sites, which usually lack an adequate supply of chisels. The 3/16 inch (4 mm) chisel is suitable for cutting mortises; the medium-profile gouge is useful in mounting locks and strike plates; the cranked chisel is invaluable for corner and rabbeting work - the only paring chisel which can be struck with a hammer without second thought. There is a 1 inch (26 mm) chisel for the really rough stuff. This set should be part of every construction tool box! Comes in wooden case.</p> <p></p>
    025.299
    The "problem solver" tool set made by Two Cherries - in wooden box Due ciliegie Chisels

    The "problem solver" tool set made by Two Cherries - in wooden box

    €150.74
  • ,
    5/ 5
    <p>Why do we offer not polished Two Cherries Chisels?</p> <p>Two Cherries chisels are well known for coming with a highly-polished finish. The polishing process creates a mirror finish on the surface of the steel, which looks very nice, and reduces friction with the wood. But the polishing process, done with a soft wheel, rounds the bevel and the face of the chisel slightly. When one would like to do very precise work with wood, completely flat surfaces are a must. So for those who value being able to do the finest work, we sell Two Cherries chisels that have been ground and sharpened to a very high standard, but with no mirror finish.</p> <p>6, 10, 12, 16, 20, 26 mm</p> <p></p>
    025.278
    Set of 6 Two Cherries chisels in wooden box, NOT polished! Due ciliegie Chisels

    Set of 6 Two Cherries chisels in wooden box, NOT polished!

    €131.07
  • ,
    5/ 5
    025.277
    Set of 6 Two Cherries chisels in wooden box mirror polished blade Due ciliegie Chisels

    Set of 6 Two Cherries chisels in wooden box mirror polished blade

    €133.52
  • ,
    5/ 5
    <p>Length 160 mm, ferrule Ø 24 mm.</p> <p>Swiss hornbeam handles, fitted with top and bottom ferrules.</p> <p></p>
    025.257
    Chisel Handle, Length 160 mm Pfeil Chisels

    Chisel Handle, Length 160 mm

    €12.21
  • ,
    5/ 5
    <p>Length 135 mm, ferrule Ø 24 mm.</p> <p>Swiss hornbeam handles, fitted with top and bottom ferrules.</p> <p></p>
    025.256
    Chisel Handle Pfeil, Length 135 mm Pfeil Chisels

    Chisel Handle Pfeil, Length 135 mm

    €7.30
  • ,
    5/ 5
    <p>Protect your tools with these tool rolls made of indestructible »Schwingerhosen-yarn« linen. The robust »Schwingerhose« is as much admired in Switzerland as the »Lederhose« (traditional Bavarian leather trousers) in Germany. The inside is lined with grey felt and thus protects the tools from touching each other and keeps away dust and shavings.</p> <p>Pockets 8</p> <p></p>
    025.252
    Empty Tool Roll Dictum Home

    Empty Tool Roll

    €51.56
  • ,
    5/ 5
    <p>This preformed protective cap made of cow leather are fixed to the chisels necks via a snap. For Japanese chisels with a blade length of up to approx. 60 mm.</p> <p></p> <p></p>
    025.248
    Leather Protective Cap Made of Preformed Leather GL Chisels

    Leather Protective Cap Made of Preformed Leather

    €3.69
  • ,
    5/ 5
    <p>Made of fine-quality leather. The seams are reinforced with rivets.</p> <p>Pockets 20</p> <p>Max. tool length 270 mm</p> <p>Outer dimensions 790 x 290 mm</p> <p></p>
    025.228
    Leather Tool Roll, 20 Pockets GL Chisels

    Leather Tool Roll, 20 Pockets

    €73.69
  • ,
    5/ 5
    <p>Made of fine-quality leather. The seams are reinforced with rivets.</p> <p>Pockets 12</p> <p>Max. tool length 300 mm</p> <p>Outer dimensions 550 x 320 mm</p> <p></p>
    025.227
    Leather Tool Roll, 12 Pockets XL GL Chisels

    Leather Tool Roll, 12 Pockets XL

    €55.66
  • ,
    5/ 5
    <p>Made of fine-quality leather. The seams are reinforced with rivets.</p> <p>Pockets 12</p> <p>Max. tool length 270 mm</p> <p>Outer dimensions 550 x 290 mm</p> <p></p>
    025.226
    Leather Tool Roll, 12 Pockets GL Chisels

    Leather Tool Roll, 12 Pockets

    €54.02
  • ,
    5/ 5
    <p>Made of fine-quality leather. The seams are reinforced with rivets.</p> <p>Pockets 6</p> <p>Max. tool length 300 mm</p> <p>Outer dimensions 370 x 320 mm</p> <p></p>
    025.225
    Leather Tool Roll, 6 Pockets XL GL Chisels

    Leather Tool Roll, 6 Pockets XL

    €40.90
  • ,
    5/ 5
    <p>Made of fine-quality leather. The seams are reinforced with rivets.</p> <p>Pockets 6</p> <p>Max. tool length 270 mm</p> <p>Outer dimensions 370 x 290 mm</p> <p></p>
    025.224
    Leather Tool Roll, 6 Pockets GL Chisels

    Leather Tool Roll, 6 Pockets

    €38.44
  • ,
    5/ 5
    <p>High-quality leather tool roll made of fine cowhide. The tools are safely secured in place by an elastic strap that prevents the tools from slipping out in any situation. The well-designed closure straps provide comfortable opening and closing, and round off the appealing design of the leather tool roll.</p> <p>Pockets 12</p> <p>Max. tool length 300 mm</p> <p>Outer dimensions 600 x 340 mm</p> <p></p>
    025.223
    Leather Tool Roll Deluxe, 12 Pockets GL Chisels

    Leather Tool Roll Deluxe, 12 Pockets

    €76.97
  • ,
    5/ 5
    <p>High-quality leather tool roll made of fine cowhide. The tools are safely secured in place by an elastic strap that prevents the tools from slipping out in any situation. The well-designed closure straps provide comfortable opening and closing, and round off the appealing design of the leather tool roll.</p> <p>Pockets 6</p> <p>Max. tool length 300 mm</p> <p>Outer dimensions 380 x 340 mm</p> <p></p>
    025.222
    Leather Tool Roll Deluxe, 6 Pockets GL Chisels

    Leather Tool Roll Deluxe, 6 Pockets

    €59.75
  • ,
    5/ 5
    <p>6-piece set in kiri wood case</p> <p>The blades of 24-layered Damascus steel (Suminagashi), laminated with Blue Paper Steel (approx. 61 HRC), have outstanding endurance, even on the hardest woods. Hefty handle of Japanese red oak, with a slim neck for controlled guidance during paring. The blades are sharpened and ready for use, not angled and have a flat back (not hollow-ground).</p> <p>Blade length 65 mm</p> <p>Overall length 210 mm</p> <p>Blade thickness 7 mm</p> <p>Version 6-Piece Set in Kiri Wood Case</p> <p>Blade width 6 / 12 / 19 / 25 / 32 / 38 mm</p> <p></p> <p>Japanese steel quality - Western blade form</p> <p></p>
    025.221
    Damascus Hybrid Chisel, 6-Piece Set GL Chisels

    Damascus Hybrid Chisel, 6-Piece Set

    €321.23
  • ,
    5/ 5
    <p>Three fully functional miniature chisels, which are reproduced on a scale of 1:3 compared to the regular Veritas chisels. Only 83 mm long overall, PM-V11 steel blade (61-63 HRC) and ground flat on the face, precious wood handles and stainless steel ferrule. Bevel angle 25°. Not only a nice gift idea or a collector's item: these chisels are extremely helpful where fine, precise cuts are needed. Comes in an elegant leatherette case.</p> <p>Overall length 83 mm</p> <p>Blade thickness 2.4 mm</p> <p>Blade width 3 / 6 / 9.5 mm</p> <p></p>
    025.214
    Veritas Miniature Chisels Veritas Chisels

    Veritas Miniature Chisels

    €51.56
  • ,
    5/ 5
    <p>10-piece set in a leather tool roll: 3 / 6 / 9 / 12 / 15 / 18 / 24 / 30 / 36 / 42 mm</p> <p>Well-crafted chisels with durable double-layered blades (milled steel). Waxed handles of Japanese red oak with pre-fitted hoops.</p> <p>Blade length 58 mm</p> <p>Overall length 225 mm</p> <p>Blade thickness 5-6 mm</p> <p>Version 10-Piece Set in Leather Tool Roll</p> <p>Blade width 3 / 6 / 9 / 12 / 15 / 18 / 24 / 30 / 36 / 42 mm</p> <p> </p> <p>Set consists of the following articles:</p> <p></p> <p>Tataki Nomi, Chisel, Blade Width 3 mm</p> <p>Tataki Nomi, Chisel, Blade Width 6 mm</p> <p>Tataki Nomi, Chisel, Blade Width 9 mm</p> <p>Tataki Nomi, Chisel, Blade Width 12 mm</p> <p>Tataki Nomi, Chisel, Blade Width 15 mm</p> <p>Tataki Nomi, Chisel, Blade Width 18 mm</p> <p>Tataki Nomi, Chisel, Blade Width 24 mm</p> <p>Tataki Nomi, Chisel, Blade Width 30 mm</p> <p>Tataki Nomi, Chisel, Blade Width 36 mm</p> <p>Tataki Nomi, Chisel, Blade Width 42 mm</p> <p>Leather Tool Roll, 12 Pockets</p> <p></p>
    025.213
    Tataki Nomi, Chisels, 10-Piece Set in a Leather Tool Roll Tataki Nomi Chisels

    Tataki Nomi, Chisels, 10-Piece Set in a Leather Tool Roll

    €285.98
  • ,
    5/ 5
    <p>"6-piece set in a leather tool roll:_ 6 / 9 / 12 / 18 / 24 / 30 mm</p> <p>Well-crafted chisels with durable double-layered blades (milled steel). Waxed handles of Japanese red oak with pre-fitted hoops.</p> <p>Blade length 58 mm</p> <p>Overall length 225 mm</p> <p>Blade thickness 5-6 mm</p> <p>Version 6-Piece Set in Leather Tool Roll</p> <p>Blade width 6 / 9 / 12 / 18 / 24 / 30 mm</p> <p> </p> <p>Set consists of the following articles:</p> <p></p> <p>Tataki Nomi, Chisel, Blade Width 6 mm</p> <p>Tataki Nomi, Chisel, Blade Width 9 mm</p> <p>Tataki Nomi, Chisel, Blade Width 12 mm</p> <p>Tataki Nomi, Chisel, Blade Width 18 mm</p> <p>Tataki Nomi, Chisel, Blade Width 24 mm</p> <p>Tataki Nomi, Chisel, Blade Width 30 mm</p> <p>Leather Tool Roll, 6 Pockets</p> <p></p>
    025.212
    Tataki Nomi, Chisels, 6-Piece Set in a Leather Tool Roll Tataki Nomi Chisels

    Tataki Nomi, Chisels, 6-Piece Set in a Leather Tool Roll

    €175.33
  • ,
    5/ 5
    <p>6-piece set in a cotton tool roll:_ 6 / 9 / 12 / 18 / 24 / 30 mm</p> <p>Well-crafted chisels with durable double-layered blades (milled steel). Waxed handles of Japanese red oak with pre-fitted hoops.</p> <p>Blade length 58 mm</p> <p>Overall length 225 mm</p> <p>Blade thickness 5-6 mm</p> <p>Version 6-Piece Set in Cotton Tool Roll</p> <p>Blade width 6 / 9 / 12 / 18 / 24 / 30 mm</p> <p></p>
    025.211
    Tataki Nomi, Chisels, 6-Piece Set in a Cotton Tool Roll Tataki Nomi Chisels

    Tataki Nomi, Chisels, 6-Piece Set in a Cotton Tool Roll

    €147.46
  • ,
    5/ 5
    <p>Well-crafted chisels with durable double-layered blades (milled steel). Waxed handles of Japanese red oak with pre-fitted hoops.</p> <p>Blade length 58 mm</p> <p>Overall length 225 mm</p> <p>Blade thickness 5-6 mm</p> <p>Version Single Chisel</p> <p>Blade width 3 mm</p> <p></p>
    025.201
    Tataki Nomi Chisel Tataki Nomi Chisels

    Tataki Nomi Chisel

    €26.97
  • ,
    5/ 5
    <p>10-piece set in a wooden case: 3 / 6 / 9 / 12 / 15 / 18 / 24 / 30 / 36 / 42 mm</p> <p>Inexpensive Japanese chisels made of milled steel (double-layered, 60 HRC) in a kiri wood case. Handles made of Japanese red oak.</p> <p>Blade length 58 mm</p> <p>Overall length 225 mm</p> <p>Blade thickness 5-6 mm</p> <p>Version 10-Piece Set in Wooden Case</p> <p>Blade width 3 / 6 / 9 / 12 / 15 / 18 / 24 / 30 / 36 / 42 mm</p> <p></p>
    025.200
    Hattori Chisel, 10-Piece Set Hattori Chisels

    Hattori Chisel, 10-Piece Set

    €215.49
  • ,
    5/ 5
    <p>6 piece set in a wooden case: 6 / 9 / 12 / 18 / 24 / 30 mm</p> <p>Inexpensive Japanese chisels made of milled steel (double-layered, 60 HRC) in a kiri wood case. Handles made of Japanese red oak.</p> <p>Blade length 58 mm</p> <p>Overall length 225 mm</p> <p>Blade thickness 5-6 mm</p> <p>Version 6-Piece Set in Wooden Case</p> <p>Blade width 6 / 9 / 12 / 18 / 24 / 30 mm</p> <p></p>
    025.199
    Hattori Chisels, 6-Piece Set Hattori Chisels

    Hattori Chisels, 6-Piece Set

    €128.61
  • ,
    5/ 5
    <p>Blade width: 40 / 50 / 63 / 75 / 90 mm</p> <p>These extra-broad chisels are perfect for large-scale carpentry, restoration and sculpture work. The front portion of the spade-shaped blade is made of HSS (64 HRC) and is hard-soldered to the body via a transitional metal layer. Durable handle made of fine-grained Chinese hardwood with untreated surface.</p> <p>Blade length 80 mm</p> <p>Overall length 240 mm</p> <p>Blade thickness 4 mm</p> <p>Version 5-Piece Set in Cotton Tool Roll</p> <p>Blade width 40 / 50 / 63 / 75 / 90 mm</p> <p></p>
    025.198
    Chinese HSS Broad Chisels, 5-Piece Set GL Chisels

    Chinese HSS Broad Chisels, 5-Piece Set

    €113.03
  • ,
    5/ 5
    <p>12-piece set in a leather tool roll: 4 / 6 / 8 / 10 / 12 / 16 / 20 / 26 / 30 / 32 / 35 / 40 mm</p> <p>Precision-made chisels with a traditional design. Forged from a chrome-vanadium steel alloy, heat-treated in an electric furnace, then ground and polished by hand. The high quality of these chisels is noticeable in their uniform hardness (approx. 60 HRC) and homogeneous fine mirror polish. The blades come pre-sharpened, ready to use, and fitted with unvarnished hornbeam handles.</p> <p>Blade length 95-105 mm</p> <p>Overall length 260-280 mm</p> <p>Blade thickness 2.5-4.5 mm</p> <p>Version 12-Piece Set in Leather Tool Roll</p> <p>Blade width 4 / 6 / 8 / 10 / 12 / 16 / 20 / 26 / 30 / 32 / 35 / 40 mm</p> <p></p>
    025.186
    Pfeil Chisel in a leather tool roll, 12-Piece Set Pfeil Chisels

    Pfeil Chisel in a leather tool roll, 12-Piece Set

    €304.18
  • ,
    5/ 5
    <p>6-piece set in a leather tool roll: 6 / 10 / 12 / 20 / 26 / 30 mm</p> <p>Precision-made chisels with a traditional design. Forged from a chrome-vanadium steel alloy, heat-treated in an electric furnace, then ground and polished by hand. The high quality of these chisels is noticeable in their uniform hardness (approx. 60 HRC) and homogeneous fine mirror polish. The blades come pre-sharpened, ready to use, and fitted with unvarnished hornbeam handles.</p> <p>Blade length 95-105 mm</p> <p>Overall length 260-280 mm</p> <p>Blade thickness 2.5-4.5 mm</p> <p>Version 6-Piece Set in Leather Tool Roll</p> <p>Blade width 6 / 10 / 12 / 20 / 26 / 30 mm</p> <p></p>
    025.185
    Pfeil Chisel in a leather tool roll, 6-Piece Set Pfeil Chisels

    Pfeil Chisel in a leather tool roll, 6-Piece Set

    €161.39
  • ,
    5/ 5
    <p>6-piece set in beechwood case: 6 / 10 / 12 / 16 / 20 / 26 mm</p> <p>Precision-made chisels with a traditional design. Forged from a chrome-vanadium steel alloy, heat-treated in an electric furnace, then ground and polished by hand. The high quality of these chisels is noticeable in their uniform hardness (approx. 60 HRC) and homogeneous fine mirror polish. The blades come pre-sharpened, ready to use, and fitted with unvarnished hornbeam handles.</p> <p>Blade length 95-105 mm</p> <p>Overall length 260-280 mm</p> <p>Blade thickness 2.5-4.5 mm</p> <p>Version 6-Piece Set in Beechwood Case</p> <p>Blade width 6 / 10 / 12 / 16 / 20 / 26 mm</p> <p></p>
    025.184
    Pfeil Chisel in beechwood case, 6-Piece Set Pfeil Chisels

    Pfeil Chisel in beechwood case, 6-Piece Set

    €151.56
  • ,
    5/ 5
    <p>Precision-made chisels with a traditional design. Forged from a chrome-vanadium steel alloy, heat-treated in an electric furnace, then ground and polished by hand. The high quality of these chisels is noticeable in their uniform hardness (approx. 60 HRC) and homogeneous fine mirror polish. The blades come pre-sharpened, ready to use, and fitted with unvarnished hornbeam handles.</p> <p>Blade length 95-105 mm</p> <p>Overall length 260-280 mm</p> <p>Blade thickness 2.5-4.5 mm</p> <p>Version Single Chisel</p> <p>Blade width 4 mm</p> <p></p>
    025.172
    Pfeil Chisel Pfeil Chisels

    Pfeil Chisel

    €19.59
  • ,
    5/ 5
    <p>6-piece set in a cotton tool roll: 6 / 9 / 12 / 18 / 24 / 30</p> <p>Ideal for restoration, on-site carpentry and cabinetmaking. Normal blade length available in all standard chisel sizes.</p> <p>HSS Chisels</p> <p>Ready to use, robust and razor sharp</p> <p>These powerful chisels made of extremely hard HSS offer excellent sharpness and a long edge life. Very hard (approx. 63 HRC) and tough, these chisels are able to withstand the rough handling which is often unavoidable in a workshop. Even sharpening on dry grinding machines is possible without compromising the hardness of the steel. The extra-long handles are made of Japanese red oak and have pre-fitted, forged steel hoops.</p> <p>Blade length 60 mm</p> <p>Overall length 240 mm</p> <p>Blade thickness 5-6 mm</p> <p>Version 6-Piece Set in Cotton Tool Roll</p> <p>Blade width 6 / 9 / 12 / 18 / 24 / 30 mm</p> <p>Set consists of the following articles:</p> <p>HSS Chisel for Cabinetmakers, Blade Width 6 mm</p> <p>HSS Chisel for Cabinetmakers, Blade Width 9 mm</p> <p>HSS Chisel for Cabinetmakers, Blade Width 12 mm</p> <p>HSS Chisel for Cabinetmakers, Blade Width 18 mm</p> <p>HSS Chisel for Cabinetmakers, Blade Width 24 mm</p> <p>HSS Chisel for Cabinetmakers, Blade Width 30 mm</p> <p></p>
    025.171
    HSS Chisels for Cabinetmakers, 6-Piece Set in Cotton Tool Roll GL Chisels

    HSS Chisels for Cabinetmakers, 6-Piece Set in Cotton Tool Roll

    €272.05
  • ,
    5/ 5
    <p>10-piece set in a leather tool roll: 3 / 6 / 9 / 12 / 15 / 18 / 24 / 30 / 36 / 42 mm</p> <p>Ideal for restoration, on-site carpentry and cabinetmaking. Normal blade length available in all standard chisel sizes.</p> <p>HSS Chisels</p> <p>Ready to use, robust and razor sharp</p> <p>These powerful chisels made of extremely hard HSS offer excellent sharpness and a long edge life. Very hard (approx. 63 HRC) and tough, these chisels are able to withstand the rough handling which is often unavoidable in a workshop. Even sharpening on dry grinding machines is possible without compromising the hardness of the steel. The extra-long handles are made of Japanese red oak and have pre-fitted, forged steel hoops.</p> <p>Blade length 60 mm</p> <p>Overall length 240 mm</p> <p>Blade thickness 5-6 mm</p> <p>Version 10-Piece Set in Leather Tool Roll</p> <p>Blade width 3 / 6 / 9 / 12 / 15 / 18 / 24 / 30 / 36 / 42 mm</p> <p> Set consists of the following articles:</p> <p></p> <p>Leather Tool Roll, 12 Pockets</p> <p>HSS Chisel for Cabinetmakers, Blade Width 3 mm</p> <p>HSS Chisel for Cabinetmakers, Blade Width 6 mm</p> <p>HSS Chisel for Cabinetmakers, Blade Width 9 mm</p> <p>HSS Chisel for Cabinetmakers, Blade Width 12 mm</p> <p>HSS Chisel for Cabinetmakers, Blade Width 15 mm</p> <p>HSS Chisel for Cabinetmakers, Blade Width 18 mm</p> <p>HSS Chisel for Cabinetmakers, Blade Width 24 mm</p> <p>HSS Chisel for Cabinetmakers, Blade Width 30 mm</p> <p>HSS Chisel for Cabinetmakers, Blade Width 36 mm</p> <p>HSS Chisel for Cabinetmakers, Blade Width 42 mm</p> <p></p>
    025.170
    HSS Chisels for Cabinetmakers, 10-Piece Set in Leather Tool Roll GL Chisels

    HSS Chisels for Cabinetmakers, 10-Piece Set in Leather Tool Roll

    €522.05
  • ,
    5/ 5
    <p>6-piece set in a leather tool roll: 6 / 9 / 12 / 18 / 24 / 30 mm</p> <p>Ideal for restoration, on-site carpentry and cabinetmaking. Normal blade length available in all standard chisel sizes.</p> <p>HSS Chisels</p> <p>Ready to use, robust and razor sharp</p> <p>These powerful chisels made of extremely hard HSS offer excellent sharpness and a long edge life. Very hard (approx. 63 HRC) and tough, these chisels are able to withstand the rough handling which is often unavoidable in a workshop. Even sharpening on dry grinding machines is possible without compromising the hardness of the steel. The extra-long handles are made of Japanese red oak and have pre-fitted, forged steel hoops.</p> <p>Blade length 60 mm</p> <p>Overall length 240 mm</p> <p>Blade thickness 5-6 mm</p> <p>Version 6-Piece Set in Leather Tool Roll</p> <p>Blade width 6 / 9 / 12 / 18 / 24 / 30 mm</p> <p></p>
    025.169
    HSS Chisels for Cabinetmakers, 6-Piece Set in Leather Tool Roll GL Chisels

    HSS Chisels for Cabinetmakers, 6-Piece Set in Leather Tool Roll

    €290.90
  • ,
    5/ 5
    <p>A cotton canvas tool roll protects the chisels when not in use.</p> <p>6-piece set in a cotton tool roll: 6 / 12 / 19 / 25 / 32 / 38 mm</p> <p>These chisels come in a completely Western design with a long blade of vanadium-alloyed steel for high durability (approx. 61 HRC). With a large ferrule and big handle made of Japanese red oak. The back of the blade is flat (not hollow-ground).</p> <p>Blade length 95 mm</p> <p>Overall length 255 mm</p> <p>Blade thickness 3-5 mm</p> <p>Version 6-piece set, in cotton tool roll</p> <p>Blade width 6 / 12 / 19 / 25 / 32 / 38 mm</p> <p></p>
    025.158
    Hybrid Chisels with Long Blades, 6-Piece Set GL Chisels

    Hybrid Chisels with Long Blades, 6-Piece Set

    €199.92
  • ,
    5/ 5
    <p>"Comes in a jute tool roll.</p> <p>These robust tools are not only great for reworking timber joints, but are also suited for occasional prying and for evening plaster. Alloyed tool steel with a hardness of 60-62 HRC at the front end of the blade. The neck and tang are made of softer steel to cushion hammer blows.</p> <p>Blade length 125-145 mm</p> <p>Overall length 300-360 mm</p> <p>Blade thickness 5.5 mm</p> <p>Version 4-Piece Set in Jute Tool Roll</p> <p>Blade width 25 / 30 / 40 / 50 mm</p> <p> </p> <p>Set consists of the following articles:</p> <p></p> <p>All-metal Chisel, 40 mm</p> <p>All-metal Chisel, 25 mm</p> <p>All-metal Chisel, 50 mm</p> <p>DICTUM Jute Tool Roll for Japanese Saws, Size 2</p> <p>All-metal Chisel, 30 mm</p> <p></p>
    025.147
    All-metal Chisels, 4-Piece Set GL Chisels

    All-metal Chisels, 4-Piece Set

    €89.26
  • ,
    5/ 5
    <p>These robust tools are not only great for reworking timber joints, but are also suited for occasional prying and for evening plaster. Alloyed tool steel with a hardness of 60-62 HRC at the front end of the blade. The neck and tang are made of softer steel to cushion hammer blows.</p> <p>Blade length 125-145 mm</p> <p>Overall length 300-360 mm</p> <p>Blade thickness 5.5 mm</p> <p>Version Single Chisel</p> <p>Blade width 25 mm</p> <p></p>
    025.143
    All-metal Chisel GL Chisels

    All-metal Chisel

    €17.13
  • ,
    5/ 5
    <p>5-piece set in a leather tool roll: 15 / 24 / 30 / 42 / 48 mm</p> <p>For heavy-duty restoration and joinery work on site. Extra-long blades with reinforced necks and thicker blades for deep mortise holes and large stock.</p> <p>HSS Chisels</p> <p>Ready to use, robust and razor sharp</p> <p>These powerful chisels made of extremely hard HSS offer excellent sharpness and a long edge life. Very hard (approx. 63 HRC) and tough, these chisels are able to withstand the rough handling which is often unavoidable in a workshop. Even sharpening on dry grinding machines is possible without compromising the hardness of the steel. The extra-long handles are made of Japanese red oak and have pre-fitted, forged steel ferrules.</p> <p>Blade length 80 mm</p> <p>Overall length 290 mm</p> <p>Blade thickness 6-8 mm</p> <p>Version 5-Piece Set in Leather Tool Roll</p> <p>Blade width 15 / 24 / 30 / 42 / 48 mm</p> <p></p> <p>Set consists of the following articles:</p> <p></p> <p>Leather Tool Roll, 6 Pockets</p> <p>HSS Chisel for Carpenters, Blade Width 15 mm</p> <p>HSS Chisel for Carpenters, Blade Width 24 mm</p> <p>HSS Chisel for Carpenters, Blade Width 30 mm</p> <p>HSS Chisel for Carpenters, Blade Width 42 mm</p> <p>HSS Chisel for Carpenters, Blade Width 48 mm</p> <p></p>
    025.142
    HSS Chisel for Carpenters, 5-Piece Set GL Chisels

    HSS Chisel for Carpenters, 5-Piece Set

    €480.25
  • ,
    5/ 5
    <p>"3-piece set in a leather tool roll: 15 / 24 / 30 mm</p> <p>For heavy-duty restoration and joinery work on site. Extra-long blades with reinforced necks and thicker blades for deep mortise holes and large stock.</p> <p>HSS Chisels</p> <p>Ready to use, robust and razor sharp</p> <p>These powerful chisels made of extremely hard HSS offer excellent sharpness and a long edge life. Very hard (approx. 63 HRC) and tough, these chisels are able to withstand the rough handling which is often unavoidable in a workshop. Even sharpening on dry grinding machines is possible without compromising the hardness of the steel. The extra-long handles are made of Japanese red oak and have pre-fitted, forged steel ferrules.</p> <p>Blade length 80 mm</p> <p>Overall length 290 mm</p> <p>Blade thickness 6-8 mm</p> <p>Version 3-Piece Set in Leather Tool Roll</p> <p>Blade width 15 / 24 / 30 mm</p> <p></p> <p>Set consists of the following articles:</p> <p></p> <p>Leather Tool Roll, 6 Pockets</p> <p>HSS Chisel for Carpenters, Blade Width 15 mm</p> <p>HSS Chisel for Carpenters, Blade Width 24 mm</p> <p>HSS Chisel for Carpenters, Blade Width 30 mm</p> <p></p>
    025.141
    HSS Chisel for Carpenters, 3-Piece Set GL Chisels

    HSS Chisel for Carpenters, 3-Piece Set

    €267.13
  • ,
    5/ 5
    <p>For heavy-duty restoration and joinery work on site. Extra-long blades with reinforced necks and thicker blades for deep mortise holes and large stock.</p> <p>HSS Chisels</p> <p>Ready to use, robust and razor sharp</p> <p>These powerful chisels made of extremely hard HSS offer excellent sharpness and a long edge life. Very hard (approx. 63 HRC) and tough, these chisels are able to withstand the rough handling which is often unavoidable in a workshop. Even sharpening on dry grinding machines is possible without compromising the hardness of the steel. The extra-long handles are made of Japanese red oak and have pre-fitted, forged steel ferrules.</p> <p>Blade length 80 mm</p> <p>Overall length 290 mm</p> <p>Blade thickness 6-8 mm</p> <p>Version Single Chisel</p> <p>Blade width 15 mm</p> <p></p>
    025.136
    HSS Chisel for Carpenters GL Chisels

    HSS Chisel for Carpenters

    €85.16
  • ,
    5/ 5
    <p>5-piece set in a cotton tool roll: 6.35 / 9.5 / 12.7 / 19 / 25.4 mm</p> <p>These chisels made by traditional tool manufacturer Henry Taylor, founded in 1834 in Sheffield, England, feature high-quality carbon steel, strong brass ferrules and dark-stained beechwood handles. The rounded handles make them comfortable to hold, but they also easily withstand the stress of chiselling wood joints with a mallet.</p> <p>Blade length 100-115 mm</p> <p>Overall length 260-280 mm</p> <p>Blade thickness 3-6 mm</p> <p>Version 5-piece set, in cotton tool roll</p> <p>Blade width 6.35 / 9.5 / 12.7 / 19 / 25.4 mm</p> <p></p>
    025.135
    Henry Taylor »English-style« Chisels, 5-Piece Set, in Cotton Tool Roll Henry Taylor Chisels

    Henry Taylor »English-style« Chisels, 5-Piece Set, in Cotton Tool Roll

    €155.66
  • ,
    5/ 5
    <p>10-piece set in a cotton tool roll: 4 / 8 / 10 / 12 / 16 / 20 / 26 / 30 / 40 mm</p> <p>High-quality chisels with hornbeam handle. The forged chisels feature highly polished blades of high-alloy tool steel (approx. 59-61 HRC) which are corrosion-protected by an ecological, water-based, stove-enamel finish. The ergonomically shaped handle with sturdy hoop is comfortable to hold and shock-absorbent due to a leather disc.</p> <p>The Stubai chisels we offer are all made of their top-quality steel.</p> <p>Blade length 120-157 mm</p> <p>Overall length 237-295 mm</p> <p>Blade thickness 3-6 mm</p> <p>Version 10-piece set, in cotton tool roll</p> <p>Blade width 4 / 6 / 8 / 10 / 12 / 16 / 20 / 26 / 30 / 40 mm</p> <p></p>
    025.129
    Stubai Chisels Spezial, 10-Piece Set, in Cotton Tool Roll Stubai Chisels

    Stubai Chisels Spezial, 10-Piece Set, in Cotton Tool Roll

    €198.28
  • ,
    5/ 5
    <p>6-piece set in a cotton tool roll: 6 / 10 / 12 / 16 / 20 / 26 mm</p> <p>High-quality chisels with hornbeam handle. The forged chisels feature highly polished blades of high-alloy tool steel (approx. 59-61 HRC) which are corrosion-protected by an ecological, water-based, stove-enamel finish. The ergonomically shaped handle with sturdy hoop is comfortable to hold and shock-absorbent due to a leather disc.</p> <p>The Stubai chisels we offer are all made of their top-quality steel.</p> <p>Blade length 120-157 mm</p> <p>Overall length 237-295 mm</p> <p>Blade thickness 3-6 mm</p> <p>Version 6-Piece Set in Cotton Tool Roll</p> <p>Blade width 6 / 10 / 12 / 16 / 20 / 26 mm</p> <p></p>
    025.128
    Stubai Chisels Spezial, 6-Piece Set, in Cotton Tool Roll Stubai Chisels

    Stubai Chisels Spezial, 6-Piece Set, in Cotton Tool Roll

    €96.64
  • ,
    5/ 5
    <p>High-quality chisels with hornbeam handle. The forged chisels feature highly polished blades of high-alloy tool steel (approx. 59-61 HRC) which are corrosion-protected by an ecological, water-based, stove-enamel finish. The ergonomically shaped handle with sturdy hoop is comfortable to hold and shock-absorbent due to a leather disc.</p> <p>The Stubai chisels we offer are all made of their top-quality steel.</p> <p>Blade length 120-157 mm</p> <p>Overall length 237-295 mm</p> <p>Blade thickness 3-6 mm</p> <p>Version Single Chisel</p> <p>Blade width 4 mm</p> <p></p>
    025.118
    Stubai Chisel Spezial, Swedish Shape Stubai Chisels

    Stubai Chisel Spezial, Swedish Shape

    €17.13
  • ,
    5/ 5
    <p>These hand-forged chisels are exceptionally sharp and hold their edge extremely well thanks to a cutting layer made of White Paper Steel. The steel is similar to the traditional Tamahagane steel (Japanese sword steel) and has a very fine-grained structure. After sharpening by hand, the blades are fitted with high-quality handles made of »Kumi«, a hard Japanese wood species traditionally used for chisel handles.</p> <p>Blade length 60 mm</p> <p>Overall length 225 mm</p> <p>Blade thickness 5-7.5 mm</p> <p>Version Single Chisel</p> <p></p> <p></p>
    025.114
    D-Kumi Nomi, Chisel D-Kumi Nomi Chisels

    D-Kumi Nomi, Chisel

    €40.08
  • ,
    5/ 5
    <p>1 marking knife and 6 chisels in wooden box: 6 / 10 / 12 / 16 / 20 / 26 mm</p> <p>These perfectly shaped paring chisels and the marking knife made of chrome-vanadium steel are hardened to approx. 60 HRC. The oval shape of the octagonal oiled elm wood handle near the chisel provides a comfortable, non-slip grip. Due to the bevelled sides and the trapezoidal cross-section, these chisels are ideal for finishing wood joints, such as dovetails or mortise holes. The marking knife, equipped with an oiled walnut handle and a finger groove in the front, provides a comfortable grip and, thanks to the prism blade, can be used for cutting against right- or left-hand stops. Suitable for right- and left-handed use.</p> <p>Blade length 100 mm</p> <p>Overall length 265 mm</p> <p>Blade thickness 3-5 mm</p> <p>Version 7-piece set, in a wooden case</p> <p>Blade width 6 / 10 / 12 / 16 / 20 / 26 mm</p> <p></p>
    025.113
    Pfeil Paring Chisels with Marking Knife, 7-Piece Set Pfeil Chisels

    Pfeil Paring Chisels with Marking Knife, 7-Piece Set

    €188.61
  • ,
    5/ 5
    <p>Blade width: 12.5 / 19 / 25 / 31 / 38 mm</p> <p>Extra-hard HSS (64 HRC) for heavy-duty applications and working on wearing materials. The slightly tapered blades reach corners and undercuts effortlessly. Fine-grained handle made of Chinese hardwood.</p> <p>Blade length 105 mm</p> <p>Overall length 230 mm</p> <p>Blade thickness 4 mm</p> <p>Version 5-Piece Set in Cotton Tool Roll</p> <p>Blade width 12.5 / 19 / 25 / 31 / 38 mm</p> <p></p>
    025.105
    Chinese HSS Cabinetmaker's Chisels, 5-Piece Set GL Chisels

    Chinese HSS Cabinetmaker's Chisels, 5-Piece Set

    €95.00
  • ,
    5/ 5
    <p>Set of Two Cherries Butt Chisels with polished blade.</p> <p>Contains 6mm / 12mm / 20mm / 26mm chisels</p>
    025.304
    Set of 4 Two Cherries Butt Chisels in paper box Due ciliegie Chisels

    Set of 4 Two Cherries Butt Chisels in paper box

    €90.08

    Set of Two Cherries Butt Chisels with polished blade.

  • Purfling Channel Cleaner Kit Grandi Liutai Italiani Chisels
    • Contact us!
    ,
    5/ 5
    <p class="MsoNormal">Micro-Chisel 7pcs set can handle the extra-fine details often encountered in violinmaking. This set features 7 sharp micro chisels.</p> <p></p> <p class="MsoNormal">Micro- Chisel Kit includes: 0,6mm/0,8mm flat chisels, 2mm/4mm bevel edge chisels, 4mm round chisel, 3mm left/right chisels.</p> <p></p> <p class="MsoNormal"></p> <p> </p> <p class="MsoNormal">Perfect for:</p> <p></p> <p class="MsoNormal">Carving fine details such as purfling channels and insertion of the Linings on blocks</p> <p></p> <p class="MsoNormal">Miniature and fine detail work</p> <p></p> <p class="MsoNormal">Cleaning up ridges created by gouge cuts</p> <p></p> <p class="MsoNormal">Cleaning up tight corners</p> <p></p> <p><span style="font-size:11pt;line-height:107%;font-family:Calibri, sans-serif;">Accessing tight spaces</span></p>
    025.048
    Purfling Channel Cleaner Kit Grandi Liutai Italiani Chisels

    Purfling Channel Cleaner Kit

    €22.05
  • ,
    5/ 5
    <p> This is a beautifully crafted set of bench chisels for general woodworking, featuring CRV steel blades hardened to RC59-63 and bubinga handles.</p> <p>This set comes in a wooden box with size 6mm, 10mm, 12mm, 16mm, 19mm and 25mm chisels.</p> <p>Features Summary:</p> <p>o<span style="white-space:pre;"> </span>Wooden Box</p> <p>o<span style="white-space:pre;"> </span>Sizes included: 6 mm, 10mm, 12 mm, 16mm, 19 mm and 25 mm</p> <p>o<span style="white-space:pre;"> </span>Blades: CRV Steel</p> <p>o<span style="white-space:pre;"> </span>Hardness: RC 59-63</p> <p>o<span style="white-space:pre;"> </span>Handles: Bubinga</p> <p></p>
    025.030
    Set of 6 LUBAN Bench Chisels Luban Chisels

    Set of 6 LUBAN Bench Chisels

    €61.39

    The set of 6 chisels suitable for violin making (blades width 6, 10, 12, 16, 18 and 25 mm) in a practical and sturdy wooden box.

  • ,
    5/ 5
    <p>Three Japanese products selected to help keep sharp tools and many other precision tools in top condition. The kit consists of a fine quality rubberized abrasive block, 240ml of Camellia oil and a special oil applicator. </p> <p>Pressed from the seeds of the Camellia tree, this light fragrant oil has been used in far eastern cultures for centuries. This Japanese Camellia Oil is food safe, non-toxic and acid free, making it perfect for protecting hand tools, machine tool beds, kitchen knives and firearms from corrosion. As a finishing oil it is quickly absorbed and will protect your work from ultraviolet light. Camellia oil is non hardening, so it will not provide impact protection, however a light coat will accentuate the grain and enable the surface to take a higher polish. It mixes well with other oils, and even a small amount will significantly improve their ability to penetrate.</p> <p></p>
    029.023
    Tool Care & Maintenance Kit for Planes and Other Fine Tools Grandi Liutai Italiani Maintenance

    Tool Care & Maintenance Kit for Planes and Other Fine Tools

    €32.70

    Three Japanese products selected to help keep sharp tools and many other precision tools in top condition.

  • Set of 2 NAREX Skew Chisels (Left and Right) in Wooden Box Narex Chisels
    • Contact us!
    ,
    5/ 5
    <p class="MsoNormal" style="line-height:16.5pt;background:#FFFFFF;vertical-align:baseline;"><span lang="en-gb" style="font-size:10.5pt;font-family:Arial, 'sans-serif';color:#333333;" xml:lang="en-gb">Special chisels with right hand skew 30</span><span lang="en-gb" style="font-size:10.5pt;font-family:inherit, serif;color:#333333;border:none 1pt;padding:0cm;" xml:lang="en-gb">˚. Suitable for cleaning out corners, dovetails and jobs in areas that cannot be reached by standard chisels. Forged blade is made of traditional Cr-Mn steel and is heat treated to 59 HRc. Ergonomic handle from hard and hefty hornbeam wood is strong enough to withstand heavy blows with a mallet.</span><span lang="en-gb" style="font-size:10.5pt;font-family:Arial, 'sans-serif';color:#333333;" xml:lang="en-gb"></span></p> <p></p> <p class="MsoNormal" style="margin-bottom:12pt;line-height:16.5pt;background:#FFFFFF;vertical-align:baseline;"><span lang="en-gb" style="font-size:10.5pt;font-family:Arial, 'sans-serif';color:#333333;" xml:lang="en-gb">Combination of the stained hornbeam handle, brass ferrule and improved griding of the cutting edge creates unique design of tool.</span></p> <p></p> <p><span lang="en-gb" style="font-size:10.5pt;line-height:107%;font-family:Arial, 'sans-serif';color:#333333;" xml:lang="en-gb">Set consist of chisels of same width, left/right version.</span></p>
    025.018
    Set of 2 NAREX Skew Chisels (Left and Right) in Wooden Box Narex Chisels

    Set of 2 NAREX Skew Chisels (Left and Right) in Wooden Box

    €40.08
  • RICHTER Bevel Edge Chisel Narex Chisels
    • Contact us!
    ,
    5/ 5
    025.004
    RICHTER Bevel Edge Chisel Narex Chisels

    RICHTER Bevel Edge Chisel

    €30.25
  • Set of 5 RICHTER Bevel Edge Chisels Cryogenic Treatment - in Wooden Box Narex Chisels
    • Contact us!
    ,
    5/ 5
    <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">Named after our founder Mr. Vaclav Richter, these chisels represent the highest quality of our manufacturing processes combining unique materials, heat treatment and machining in order to produce the finest tool for woodworkers. Every chisel is marked by our trademark RICHTER EXTRA.</span></p> <p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">Cryogenic treatment. Right after initial hardening, cryogenic treatment cools the steel down to very low temperatures by using liquid nitrogen to as low as −190 °C. This completes transformation of austenite, which increases both the hardness and toughness of the steel.</span></p> <p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us"> </span></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">Blade:</span></p> <p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">-forged from high quality Cr-V steel</span></p> <p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">-cryogenically treated and tempered to at least 62 HRc</span></p> <p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">-fine ground and polished</span></p> <p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">-ultra-thin sides for reaching into tight spaces</span></p> <p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us"> </span></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">Handle:</span></p> <p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">-domestic ash hardwood</span></p> <p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">-sanded and polished</span></p> <p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">-solid stainless steel ferrule</span></p> <p></p> <p><span lang="en-us" style="font-size:11pt;line-height:107%;font-family:Calibri, 'sans-serif';" xml:lang="en-us">-leather washer</span></p>
    025.001
    Set of 5 RICHTER Bevel Edge Chisels Cryogenic Treatment - in Wooden Box Narex Chisels

    Set of 5 RICHTER Bevel Edge Chisels Cryogenic Treatment - in Wooden Box

    €168.77
  • NAREX Skew Chisel - Left/Right Narex Chisels
    • Contact us!
    ,
    5/ 5
    025.010
    NAREX Skew Chisel - Left/Right Narex Chisels

    NAREX Skew Chisel - Left/Right

    €13.77
  • Set of 4 NAREX Butt Chisels in Wooden Box Narex Chisels
    • On sale!
    • -20%
    • Contact us!
    ,
    5/ 5
    <p><span lang="en-us" style="font-size:11pt;line-height:107%;font-family:Calibri, 'sans-serif';" xml:lang="en-us">The short blades of the WOOD LINE PLUS series have basically the same features as the long version. Especially in tight corners or for delicate operations it is advantageous to have your hand close to the cutting edge. This set in a wooden box includes the sizes 6, 12, 20 and 26 mm.</span></p>
    025.002
    Set of 4 NAREX Butt Chisels in Wooden Box Narex Chisels

    Set of 4 NAREX Butt Chisels in Wooden Box

    €49.11 -20% €61.39
  • ,
    5/ 5
    <p>Many hinges and bolts have square corners, but your router leaves rounded corners. Place in the corner and strike with the hammer and you get a 90° corner. The waste you clean out with a chisel. H.S.S. blade, resharpenable, blade width 10 mm, total length 75 mm only.</p> <p></p>
    025.313
    Corner Chisel GL Chisels

    Corner Chisel

    €13.85
  • ,
    5/ 5
    025.279
    TWO CHERRIES Chisels NOT POLISHED Due ciliegie Chisels

    TWO CHERRIES Chisels NOT POLISHED

    €23.69
  • ,
    5/ 5
    <p> This is a beautifully crafted set of butt chisels for general woodworking, featuring CRV steel blades hardened to RC59-63 and bubinga handles that sit beautifully in the palm for precise hand cutting and paring of joints.</p> <p>This set comes in a wooden box with size 6mm, 13mm, 19mm and 25mm chisels.</p> <p>Features Summary:</p> <p>o<span style="white-space:pre;"> </span>Wooden Box</p> <p>o<span style="white-space:pre;"> </span>Sizes included: 6mm, 13mm, 19mm and 25mm </p> <p>o<span style="white-space:pre;"> </span>Blades: CRV Steel</p> <p>o<span style="white-space:pre;"> </span>Hardness: RC 59-63</p> <p>o<span style="white-space:pre;"> </span>Handles: Bubinga</p> <p></p> <h3>Our evaluation of the Set of 4 Short Chisels by Luban</h3> <p>The Set of 4 Short Chisels by Luban has been carefully evaluated by our team of experts at Grandi Liutai and represents an excellent choice for luthiers and craftsmen seeking high-quality chisels for their precision work. This set of chisels is specifically designed for woodwork, and we are pleased to confirm that it is a product of the highest quality. The Set of 4 Short Chisels by Luban is made with durable materials, ensuring long-lasting durability and exceptional precision in the woodworking process. The blades are sharp and ready for use, enabling precise and clean cuts on wood. Their short and maneuverable design makes them ideal for working in tight spaces or for finer details. They are also equipped with ergonomic handles that provide a comfortable and secure grip during use. We particularly appreciate the quality of the chisel blades, which maintain their sharpness for a long time and require minimal maintenance. Their hardness and resistance to wear allow them to tackle demanding tasks without compromising precision and effectiveness. Additionally, the Luban chisel set is easy to sharpen and restore, ensuring optimal performance over time. In addition to the quality of the materials and blades, the Luban chisel set also stands out for its versatility. The four chisels with different blade widths allow for a variety of carving and sculpting tasks. They are suitable for both professional luthiers and hobbyists seeking high-quality results. In summary, the Set of 4 Short Chisels by Luban is an excellent choice for luthiers and craftsmen in search of high-quality chisels for their work. Their precision, durability, and versatility make them indispensable tools for woodworking. We highly recommend the Set of 4 Short Chisels by Luban to anyone seeking excellent results in woodworking and the carving of intricate details.</p>
    025.029
    Set of 4 LUBAN Butt Chisels Luban Chisels

    Set of 4 LUBAN Butt Chisels

    €45.00

    The set of 4 butt chisels suitable for violin making (blades width 6, 13, 19 and 25 mm) in a practical and sturdy wooden box.

  • ,
    5/ 5
    <p>Made by TWO CHERRIES in Remscheid, Germany</p> <p>Skew angle 45°</p> <p>Blade polished</p> <p>Hornbeam handle</p> <p>Total length 270 mm</p> <p>Delivered as pair only</p>
    025.305
    SET of 2 Skew Chisels "Two Cherries" left + right Due ciliegie Home

    SET of 2 Skew Chisels "Two Cherries" left + right

    €49.92

    Skew angle 45°

  • ,
    5/ 5
    <p>These chisels are made with highest quality German steel. Beveled edged, forged blades are heat treated and polished. </p> <p>Light hardwood handle has pattern. </p> <p>Two Cherries Tools are still largely made the same way in which they were made decades ago and still produced in the factory of Remscheid in Germany. The finest steel is used throughout the product line, and skilled craftsmen still work with diligence to bring you a tool that you will be proud to own and love to work with. Take care of these tools, your children and grandchildren will thank you.</p> <p></p> <p>Carefully forged blades are skillfully heat treated in a salt immersion bath to achieve a Rockwell Hardness of 61C. This means that sharpening the chisels may take an extra few minutes, but they will hold an edge significantly longer than just about any other brand on the market. After heat treating, the blades are polished to a rich finish that makes them a joy to use. Fitting size-appropriate handles made from European Hardwood is the final step in producing these highest quality German Chisels.</p>
    025.262
    "Two Cherries" Chisels with polished blade Due ciliegie Chisels

    "Two Cherries" Chisels with polished blade

    €24.18

    These chisels are made with highest quality German steel. Beveled edged, forged blades are heat treated and polished. 

  • Leather Tools Roll Grandi Liutai Italiani Chisels
    • -24%
    ,
    5/ 5
    <h2>high-quality Leather tool rool wrap on OFFER!</h2> <p>MADE WITH HIGH QUALITY LEATHER: The Tool Roll is handcrafted using highest quality Suede Leather. The Suede Leather is super soft to the touch, durable and attractive. It’s the best way to store your fine tools with due care and respect.</p> <p>LARGE CAPACITY TOOL ROLL: With 16 tool slots, you can put a variety of small to medium-sized hand tools such as chisels, files, rasps, scrapers, knives, gouges, and more, the best home for your favourite tools. The longest tool that fits measures 26cm.</p> <p>COMPACT AND EASY TO CARRY - Measures 52cm X 27,5cm when unrolled. Rolls up to a compact size for easy carrying. Perfect kit for a violinmaker or a wood carver to store his precious chisels or serve as a tool kit for other profession such as contractor, HVAC repairman, plumber, framer, electrician, or cable &amp; audio visual installer.</p> <p>COMPACT &amp; LIGHTWEIGHT: The lightweight Suede Leather Tool Roll is perfect for conveniently packing away in your bag for when you’re on the go. Offering style and protection, the Tool Roll folds up neatly and securely so you don’t have to worry.</p> <p>SIMPLE AND FUNCTIONAL DESIGN, MAKES A GREAT GIFT: This makes an excellent gift for your friend, loved ones and family. Makes a great gift for anyone and everyone, from those who enjoy a bit of DIY around the house, to the professional craftsmen and women. This Tool Roll also serves for other trades, it’s great for chefs, excellent for storing your tools on the go or travelling, perfect for your wrenches and tools for your motorbike or car, you name it.</p> <h3>Choose your tool roll for chisels, gouges, files, rasps and more</h3>
    029.008
    Leather Tools Roll Grandi Liutai Italiani Chisels

    Leather Tools Roll

    €24.23 -24% €31.89

    The Tool Roll is handcrafted using highest quality Suede Leather. With 16 tool slots, you can put a variety of small to medium-sized hand tools such as chisels, files, rasps, scrapers, knives, gouges, and more, the best home for your favourite tools.

  • ,
    5/ 5
    <p>The cutting edges of chisels are delicate and can easily be damaged by, or damage, other tools that they come in contact with during storage and transport. If the edges become damaged, it will take time to sharpen and hone the blade to the point that it can be used again. Most chisels are delivered with edge guard caps, but these can be easily lost. So we offer here a full selection of plastic edge guard caps. Price is per guard!</p> <p></p> <p>Important: Care must be taken to ensure the chisels are dry when put into plastic caps. Water can be trapped between the plastic and the chisel, and will corrode the blade. This is especially important with high-carbon steel blades.</p> <p></p> <p>These caps will fit other western chisels too. They work well enough aside from mortise chisels and some of the lines of firmer chisels.</p> <p>Chisel NOT included!</p> <p></p>
    025.323
    Chisel Edge Guards in plastic GL Chisels

    Chisel Edge Guards in plastic

    €0.41
  • ,
    5/ 5
    <p>Max. diameter of handle 35 mm (1-3/8 inch)</p> <p>Max. recommended length of tools 300 mm (12 inch)</p> <p></p>
    025.314
    Canvas tool roll with cord GL Chisels

    Canvas tool roll with cord

    €8.93
  • ,
    5/ 5
    025.307
    Handles for "TWO CHERRIES" chisels Due ciliegie Chisels

    Handles for "TWO CHERRIES" chisels

    €6.48
  • ,
    5/ 5
    <p>High-class leather protective cap made of fine cow leather which slide over the blade.</p> <p></p> <p></p>
    025.245
    Leather Protective Cap for Mortise Chisels Made of Stretchable Leather GL Chisels

    Leather Protective Cap for Mortise Chisels Made of Stretchable Leather

    €2.38
  • ,
    5/ 5
    <p>Strong, impregnated cotton fabric rollup case. Belt with snap fastener. As the tools are secured by a flap, they cannot fall out.</p> <p>Pockets 6</p> <p>Max. tool length 260 mm</p> <p>Outer dimensions 390 x 420 mm</p> <p></p>
    025.242
    Rollup Case GL Chisels

    Rollup Case

    €13.03
  • ,
    5/ 5
    <p>High-class leather protective cap made of fine cow leather fixed to the neck of the chisels via two crosswise oriented straps and a snap.</p> <p></p> <p></p>
    025.238
    Leather Protective Cap for Chisels Made of Stretchable Leather GL Chisels

    Leather Protective Cap for Chisels Made of Stretchable Leather

    €5.66
  • ,
    5/ 5
    <p>For Japanese chisels, transparent plastic.</p> <p>For blade width 6 mm</p> <p></p>
    025.229
    Protective Cap GL Chisels

    Protective Cap

    €0.41
  • ,
    5/ 5
    <p>The blades of 24-layered Damascus steel (Suminagashi), laminated with Blue Paper Steel (approx. 61 HRC), have outstanding endurance, even on the hardest woods. Hefty handle of Japanese red oak, with a slim neck for controlled guidance during paring. The blades are sharpened and ready for use, not angled and have a flat back (not hollow-ground).</p> <p>Blade length 65 mm</p> <p>Overall length 210 mm</p> <p>Blade thickness 7 mm</p> <p>Version Single Chisel</p> <p>Blade width 38 mm</p> <p></p> <p>Japanese steel quality - Western blade form</p> <p></p>
    025.220
    Damascus Hybrid Chisel GL Chisels

    Damascus Hybrid Chisel

    €42.54
  • ,
    5/ 5
    <p>These extra-broad chisels are perfect for large-scale carpentry, restoration and sculpture work. The front portion of the spade-shaped blade is made of HSS (64 HRC) and is hard-soldered to the body via a transitional metal layer. Durable handle made of fine-grained Chinese hardwood with untreated surface.</p> <p>Blade length 80 mm</p> <p>Overall length 240 mm</p> <p>Blade thickness 4 mm</p> <p>Version Single Chisel</p> <p>Blade width 40 mm</p> <p></p>
    025.193
    Chinese HSS Broad Chisel GL Chisels

    Chinese HSS Broad Chisel

    €17.13
  • ,
    5/ 5
    <p>Chisels with tapered blade, ideal for undercutting in joinery and for cleaning corners and notches. Cutting edge of White Paper Steel. The handles are made of Japanese red oak and have forged steel hoops.</p> <p>Blade length 60 mm</p> <p>Overall length 230 mm</p> <p>Blade thickness 4-7 mm</p> <p>Blade width 6 mm</p> <p></p>
    025.187
    Tapered Chisel GL Chisels

    Tapered Chisel

    €43.36
  • ,
    5/ 5
    <p>Ideal for restoration, on-site carpentry and cabinetmaking. Normal blade length available in all standard chisel sizes.</p> <p>HSS Chisels</p> <p>Ready to use, robust and razor sharp</p> <p>These powerful chisels made of extremely hard HSS offer excellent sharpness and a long edge life. Very hard (approx. 63 HRC) and tough, these chisels are able to withstand the rough handling which is often unavoidable in a workshop. Even sharpening on dry grinding machines is possible without compromising the hardness of the steel. The extra-long handles are made of Japanese red oak and have pre-fitted, forged steel hoops.</p> <p>Blade length 60 mm</p> <p>Overall length 240 mm</p> <p>Blade thickness 5-6 mm</p> <p>Version Single Chisel</p> <p>Blade width 3 mm</p> <p></p>
    025.159
    HSS Chisel for Cabinetmakers GL Chisels

    HSS Chisel for Cabinetmakers

    €54.02
  • ,
    5/ 5
    <p>These chisels come in a completely Western design with a long blade of vanadium-alloyed steel for high durability (approx. 61 HRC). With a large ferrule and big handle made of Japanese red oak. The back of the blade is flat (not hollow-ground).</p> <p>Blade length 95 mm</p> <p>Overall length 255 mm</p> <p>Blade thickness 3-5 mm</p> <p>Version Single Chisel</p> <p>Blade width 6 mm</p> <p></p>
    025.148
    Hybrid Chisel With Long Blade GL Chisels

    Hybrid Chisel With Long Blade

    €26.15
  • ,
    5/ 5
    <p>These chisels made by traditional tool manufacturer Henry Taylor, founded in 1834 in Sheffield, England, feature high-quality carbon steel, strong brass ferrules and dark-stained beechwood handles. The rounded handles make them comfortable to hold, but they also easily withstand the stress of chiselling wood joints with a mallet.</p> <p>Blade length 100-115 mm</p> <p>Overall length 260-280 mm</p> <p>Blade thickness 3-6 mm</p> <p>Version Single Chisel</p> <p>Blade width 6.35 mm</p> <p></p>
    025.130
    Henry Taylor »English-style« Chisel Henry Taylor Chisels

    Henry Taylor »English-style« Chisel

    €31.07
  • ,
    5/ 5
    <p>Extra-hard HSS (64 HRC) for heavy-duty applications and working on wearing materials. The slightly tapered blades reach corners and undercuts effortlessly. Fine-grained handle made of Chinese hardwood.</p> <p>Blade length 105 mm</p> <p>Overall length 230 mm</p> <p>Blade thickness 4 mm</p> <p>Version Single Chisel</p> <p>Blade width 12.5 mm</p> <p></p>
    025.100
    Chinese HSS Cabinetmaker's Chisel GL Chisels

    Chinese HSS Cabinetmaker's Chisel

    €15.49
  • NAREX Paring Chisel Narex Chisels
    • Contact us!
    ,
    5/ 5
    025.003
    NAREX Paring Chisel Narex Chisels

    NAREX Paring Chisel

    €24.51

Lo scalpello del falegname con la lama sagomata è uno strumento di taglio utilizzato dai falegnami per scolpire la legna o per intagliare la forma desiderata in un pezzo di legno. La lama sagomata è progettata per avere una forma specifica, che può variare in base alle esigenze dell'artigiano. Il falegname utilizza questo scalpello tenendolo con la mano dominante e spingendo la lama con la mano non dominante. Questo permette all'artigiano di controllare il taglio e di creare forme precise e dettagliate nel legno. In generale, gli scalpelli del falegname sono strumenti di alta precisione che richiedono un'esperienza significativa e una tecnica accurata per essere utilizzati correttamente.