Veritas

Active filters

  • ,
    5/ 5
    023.080
    VERITAS Miniature Spokeshave - Flat Blade Veritas Planes

    VERITAS Miniature Spokeshave - Flat Blade

    €49.92
  • ,
    5/ 5
    <p>Standard block plane 20°. For heavier cuts with the grain. Bevel angle 25°. Results in a normal cutting angle of 45°.</p> <p>PM-V11 Steel</p> <p>PM-V11 steel is made from a new, powder metallurgy steel alloy. With its ultra-fine and homogeneous material structure and extreme hardness (HRC 61-63), this steel has double the edge-retention capacity of A2 steel. The extremely hard-wearing blades allow a razor-sharp edge and are highly durable even at a bevel angle of less than 20°. All blades come with a 2° microbevel and can be sharpened on conventional waterstones.</p> <p>Compact all-round plane for fine shavings. The mouth opening can be adjusted according to the application, using the configurable shoe (for removing thick or thin shavings). The indentations in the sides make it easier to guide this handy plane accurately. Central setscrew for blade depth and lateral adjustment. Please note: The plane is supplied in two parts (plane body and blade).</p> <p>Veritas Planes</p> <p>The corporate philosophy of Canadian tool manufacturer Veritas aims to develop new adjustment mechanisms and enhance historic plane design. With bodies made of stress-relieved spheroidal cast iron, these tools are highly resistant to cracking and distortion. Their soles are perfectly plane and trued at right angles to the sides. Their thick blades of high-strength A2 steel are hardened to 60-62 HRC and additionally subjected to a special low-temperature process to achieve a finer grain. Veritas planes are optionally available with PM-V11 blades. (The Custom series models are equipped with PM-V11 blades as standard). Two setscrews on the sides constrain the blade laterally, keeping it in place regardless of the type of stress applied. Unless otherwise stated, the blade is angled at 45°. With their material combination of finely-ground or black-coated cast iron bodies, polished brass setscrews and beautiful torrefied maple handles, these planes are also pleasing to the eye</p> <p>Blade material PM-V11™</p> <p>Blade width 41 mm</p> <p>Blade thickness 3.2 mm</p> <p>Overall length 160 mm</p> <p>Weight 800 g</p> <p>Blade angle 20 °</p> <p></p>
    023.020
    VERITAS Block Plane PM-V11® Veritas Planes

    VERITAS Block Plane PM-V11®

    €221.23

    Standard block plane 20°. For heavier cuts with the grain. Bevel angle 25°. Results in a normal cutting angle of 45°.

  • ,
    5/ 5
    <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">This version of the low-angle block plane is about a third the size of the original Veritas block plane.</span></p> <p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us"> </span></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">At just under 64 mm (2-1/2 inch) long and 19 mm (3/4 inch) wide, it is a useful size for small-scale work or where a larger plane would be difficult to use. The low 12° bed angle combined with the 25° blade bevel gives it a cutting angle of 37°, making it also suitable for end-grain use.</span></p> <p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us"> </span></p> <p><span lang="en-us" style="font-size:11pt;line-height:107%;font-family:Calibri, 'sans-serif';" xml:lang="en-us">The stainless-steel Norris-style adjuster lets you set the 12.7 mm (1/2 inch) wide A2 blade (1.5 mm thick) with precision. The body is made from investment-cast stainless steel, and has a fixed mouth, machined sides and a ground sole. Weighs 50 g (1.7 oz).</span></p>
    023.008
    VERITAS Miniature Block Plane - Blade 12,7 mm Veritas Planes

    VERITAS Miniature Block Plane - Blade 12,7 mm

    €63.85