Basic Sharpening Set for all straight Tools

5/ 5

<p>Double-sided mini diamond plates for whetting, polishing and honing.</p> <p>Compact, light and flexible.</p> <p>For chamfering fret ends and levelling frets, especially on small plucked instruments, such as mandolins and ukuleles.</p> <p>100 x 30 x 1 mm</p> <p></p>

032.417

5/ 5

<p>Shaping stone with good sharpening qualities. Green silicon carbide abrasive.</p> <p>King/Sun Tiger</p> <p>Matsunaga is one of the largest manufacturers of sharpening stones in Japan. In the West, these stones are usually known as King stones or Sun Tiger stones. The stones of the King or Sun Tiger series have a relatively soft bond, which allows the abrasives to be continually exposed during use, making the stone highly effective. These stones are ideal for extremely hard, low-alloy carbon steels (White and Blue Paper Steel). Before use, soak the stones in water for at least 15 minutes. They can also be stored in water permanently. Green silicon carbide abrasive is used for 180 grit. For all other grits aluminium oxideis used.</p> <p>Grit 220</p> <p>Dimensions 205 x 66 x 34 mm</p> <p></p>

032.188

5/ 5

<p>This waterproof yet non-slip rubber mat is ideal as a workpad for sharpening machines as well as for sharpening by hand using waterstones. The raised rim and all-round groove will retain any water spillage. The relatively soft material also protects freshly sharpened tools placed on the mat. 533 x 343 mm.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p></p>

032.239

5/ 5

<p>This strop block is ideal for polishing (stropping) cutting edges of knives and razors, as well as chisels or plane blades. The synthetically produced surface has no wave, and so the tools can be honed in all directions. Thanks to the different colour coding and grit specifications that are laser etched on the underside of the acrylic strop block, the polishing emulsion that is to be used on the surface can be immediately identified. The colour of the label on the bottle of the different polishing emulsions corresponds with the colour of the related strop block. Comes without poly emulsion.</p> <p></p> <p>Dimensions 210 x 70 x 20 mm</p> <p></p> <p></p>

032.148

5/ 5

<p>Arkansas stones are available in different hardnesses on the market. They are called Soft, Hard, Hard Black, Surgical and Translucent and differ in grit size.</p> <p>Arkansas Oilstones</p> <p>Fine grained, extremely wear-resistant honing stones, for use with an oil lubricant. Due to their high degree of hardness, they are ideal for polishing curved cutting edges. The stones we offer have a uniform structure and are crack-free. They originate from quarries in the Ouachita Mountains in Arkansas (USA).</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p></p> <p>Grit 6000-8000</p> <p>Dimensions 150 x 48 x 20 mm</p> <p></p>

032.084

5/ 5

<p>For blades of any length, minimum blade width 13 mm.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p></p>

032.015

5/ 5

<p>Very fine Japanese natural sharpening stone that is cultivated on the seabed (region Tsushima-Nagasaki). This natural sharpening stone cuts well and produces very little slurry. Also suitable for cleaning the structure of sharpening stones and creating a fine polishing paste. Do not keep it in water permanently.</p> <p>Japanese Natural Stones</p> <p>""A blade and sharpening stone must be as perfect a match as bride and groom"" according to legendary blacksmith, Shigeoshi Iwasaki. Finding the ideal pairing is no easy task in either case. Despite the excellent performance of synthetic stones, many experienced sharpeners still prefer natural stones for sharpening their finest blades. Japanese sharpening stones are particularly renowned for their ability to harmoniously sharpen hand-forged carbon steels. They can bring a blade’s full potential to the fore and allow the sharpening process itself to become a pleasant ritual. The finest stones from the Honyama quarries are becoming increasingly difficult to acquire - we take great pleasure in still being able to offer these rare treasures. Natural Japanese stones may only be used with water and must be kept protected from frost. Please note that the stones may have slight natural imperfections and may vary somewhat in size.</p> <p> </p> <p>Grit 3000-5000</p> <p>Dimensions 180 x 55 x 50 mm</p> <p></p>

032.112

5/ 5

<p>Granite stone plate for use in combination with sandpaper for sharpening tool blades or trueing waterstones and oilstones. Anti-slip feet for added stability. Flatness tolerance ± 0.1 mm. Colour may vary.</p> <p>Dimensions 280 x 130 x 20 mm</p> <p></p>

032.226

5/ 5

<p>TORMEK T-8 Original takes precision and stability to a completely new level. The new design integrates the previously mounted sleeves for the vertical and horizontal support into the revolutionary fully cast top and frame. The enhanced stability optimizes jig guidance and thus the sharpening accuracy.</p> <p>""Tormek Original"" sharpening wheel (SG-250), aluminium oxide, Ø 250 x 50 mm, grit 220; leather honing wheel, Ø 215 x 30 mm; universal support, finely adjustable (can be used horizontally or vertically). 230 V, 200 W, 90 rpm, torque 14.7 Nm, 14.8 kg.</p> <p>Includes:</p> <p>Square Edge Jig (SE-77)</p> <p>Adjustable Trueing Tool (TT-50)</p> <p>Stone Grader (SP-650)</p> <p>Pro Angle Master (WM-200)</p> <p>Honing Compound (PA-70)</p> <p>Handbook (HB-10)</p> <p>Instruction Video (DVD-1)</p> <p>Edge Marker (EM-15)</p> <p>Voucher for free participation in a one-day workshop of your choice or a discount of €100 for a multi-day workshop.</p> <p>Comes with Tormek manual in German language.</p> <p>Tormek Sharpening System</p> <p>Proven for many years and constantly perfected wet working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.</p> <p>The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The offset front end can also be used for flat honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.</p> <p>A summary of the advantages of Tormek sharpening machines</p> <p>Longer working life of T-8 and T-4 Original:</p> <p>Stainless steel spindle with EzyLock-System for easier stone assembling</p> <p>Solid zinc cast housing with integrated vertical and horizontal support</p> <p>Better motor insulation</p> <p></p> <p>Additional advantages of T-8 Original:</p> <p>Electrophoretic dip painted casing, zinc cast housing frame and robust ABS plastic sides for better corrosion protection</p> <p>Silent running, maintenance free motor, designed for continuous operation, 25 000 hour life</p> <p>Improved water container with screw lift for easy positioning, overspill rim, drip-off plate, magnetic swarf collector and magnetic cleaning scraper</p> <p></p>

032.010

5/ 5

<p>For sculpting tools and turning tools. Aluminium oxide abrasive.</p> <p>King/Sun Tiger</p> <p>Matsunaga is one of the largest manufacturers of sharpening stones in Japan. In the West, these stones are usually known as King stones or Sun Tiger stones. The stones of the King or Sun Tiger series have a relatively soft bond, which allows the abrasives to be continually exposed during use, making the stone highly effective. These stones are particularly suitable for extremely hard, low-alloy carbon steels (White and Blue Paper Steel). Before use, soak the stones in water for at least 15 minutes. They can also be stored in water permanently. Green silicon carbide abrasive is used for 180 grit. For all other grits aluminium oxideis used.</p> <p>Small stone size: 61 x 22 x 5 mm </p> <p>Large stone size: 100 x 50 x 10 mm</p> <p></p>

032.050

5/ 5

<p>The wide roller preserves the surface of the stone and prevents tilting. Can be used as an angle jig with grinding machines which have a tool rest. Aluminium body with brass roller.</p> <p>Max. blade width 65 mm</p> <p>Max. blade thickness 10 mm</p> <p></p>

032.305

5/ 5

<p>Medium-grit lime sandstone from the Kumamoto region for general sharpening. Readily absorbs water, cuts well and easily produces a fine slurry.</p> <p>Japanese Natural Stones</p> <p>""A blade and sharpening stone must be as perfect a match as bride and groom"" according to legendary blacksmith, Shigeoshi Iwasaki. Finding the ideal pairing is no easy task in either case. Despite the excellent performance of synthetic stones, many experienced sharpeners still prefer natural stones for sharpening their finest blades. Japanese sharpening stones are particularly renowned for their effect to harmoniously sharpen hand-forged carbon steels. They can bring a blade’s full potential to the fore and allow the sharpening process itself to become a pleasant ritual. The finest stones from the Honyama quarries are becoming increasingly difficult to acquire - we take great pleasure in still being able to offer these rare treasures. Natural Japanese stones may only be used with water and must be kept protected from frost. Please note that the stones may have slight natural imperfections and may vary somewhat in size.</p> <p> </p> <p>Grit 800-1200</p> <p>Dimensions 220 x 60 x 62 mm</p> <p></p>

032.197

5/ 5

<p>Per affilare coltelli e utensili. Fornito in scatola di legno.</p> <p>Pietre diamantate DMT</p> <p>Il produttore americano Diamond Machining Technology (DMT) è inventore della superficie interrotta di affilatura diamantata e leader da anni sul mercato di mezzi di affilatura tempestati di diamanti. I mezzi di affilatura di alta qualità vengono realizzati nella sede del Massachusetts (USA).</p> <p>Le particelle di diamante monocristalline garantiscono lunga durata e una buona asportazione di materiale</p> <p>Granulometria uniforme ed una distribuzione di diamanti densa per micrografie uniformi</p> <p>Le rientranze rotonde evitano intasamenti con rimozione del materiale abrasivo</p> <p>Piastre portanti in acciaio con matrice di acciaio inox lappate nello specifico in modo permanente in piano e senza deformazioni</p> <p>Codifica del colore per le diverse granulometrie</p> <p>Realizzato al 100 % negli Stati Uniti</p> <p>Abrasivi diamantati monocristallini*:</p> <p>Poiché i mezzi di affilatura con rivestimento diamantato rimangono permanentemente in piano, sono particolarmente adatti per gli utensili con taglienti dritti, nonché per la produzione di superfici piane (per es. lati speculari di ferri per pialle e scalpelli, suole di pialle, rasiere). Adatto anche per frese rivestite in carburo, acciai per utensili, HSS e materiali non metallurgici (vetro, ceramica, ecc.). Si consiglia di umettare i mezzi di affilatura diamantati con acqua e levigare con poca pressione.</p> <p>* I diamanti monocristallini sono molto più stabili dei policristallini, che vengono utilizzati su utensili di taglio di qualità inferiore.</p> <p> </p> <p>Dimensioni 152 x 50 x 19 mm</p> <p></p>

032.130

5/ 5

<p>Maximum precision and solid zinc cast housing</p> <p>TORMEK T-8 Original takes precision and stability to a completely new level. The new design integrates the previously mounted sleeves for the vertical and horizontal support into the revolutionary fully cast top and frame. The enhanced stability optimizes jig guidance and thus the sharpening accuracy.</p> <p>The Tormek DC-250 Diamond Grinding Wheel with grit 360 achieves efficient removal and quickly repairs a blunt or damaged cutting edge. It is the ideal grinder for the turner and is particularly durable. The high quality of the diamond grinding surface ensures efficient, constant sharpening with a constant wheel diameter. With this set you also receive all relevant sharpening guides.</p> <p>Diamond grinding wheel ""Tormek DC-250"", grit 360, Ø 250 x 50 mm; leather honing wheel Ø 215 x 30 mm; universal support with fine adjustment (can be used horizontally or vertically). 230 V, 200 W, 90 rpm, torque 14.7 Nm, 14.8 kg.</p> <p>Includes:</p> <p>Square edge jig (SE-77)</p> <p>Adjustable trueing tool (TT-50) and stone grader (SP-650) for additional standard sharpening wheels (water stones)</p> <p>Anti-corrosion concentrate, 150 ml (ACC-150)</p> <p>Pro Angle Master (WM-200)</p> <p>Honing compound (PA-70)</p> <p>Handbook (HB-10)</p> <p>Instruction video (DVD-1)</p> <p>Woodturner's kit (TNT-808)</p> <p>Edge marker (EM-15)</p> <p>Comes with Tormek manual in German language.</p> <p>Tormek Sharpening System</p> <p>Proven for many years and constantly perfected wet working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.</p> <p>The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The offset front end can also be used for flat honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.</p> <p>A summary of the advantages of Tormek sharpening machines</p> <p>Longer working life of T-8 and T-4 Original:</p> <p>Stainless steel spindle with EzyLock-System for easier stone assembling</p> <p>Solid zinc cast housing with integrated vertical and horizontal support</p> <p>Better motor insulation</p> <p></p> <p>Additional advantages of T-8 Original:</p> <p>Electrophoretic dip painted casing, zinc cast housing frame and robust ABS plastic sides for better corrosion protection</p> <p>Silent running, maintenance free motor, designed for continuous operation, 25 000 hour life</p> <p>Improved water container with screw lift for easy positioning, overspill rim, drip-off plate, magnetic swarf collector and magnetic cleaning scraper</p> <p></p>

032.326

5/ 5

<p>Belgian Coticule Whetstones</p> <p>The quarrying of Belgian whetstones in the Ardennes is first mentioned in a Roman document. But the story of these natural honing stones goes further back than that. The approx. 480 million-year-old grey yellow sedimentary stones, originating from volcanic ash, are composed of very fine garnet crystals. During honing, these are released from the matrix and, in combination with water and abrasion debris, make a honing paste. The garnets only remove fine shavings from the metal and ensure a good polish. Unique combination of quick abrasive action and grain size.</p> <p>Interesting fact: To produce 1 kg of sharpening stones approx. 1500 kg of cliff must be removed. The thin yellow slices are glued to a slate base and cut to size.</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p></p> <p>Grit 6000-8000</p> <p>Dimensions 150 x 40 x 20 mm</p> <p></p>

032.405

5/ 5

<p>These strops can be used with or without paste to polish tool blades. If necessary, you can use finishing paste on the black (rougher) side; the fine brown side is usually used for stropping without paste. Can be held by the handle or screwed to a worktop through the two holes.</p> <p>Dimensions 415 x 75 x 18 mm</p> <p></p>

032.294