List of products by brand Veritas

Active filters

  • ,
    5/ 5
    <p>The key to achieving a swift and effective sharpening process lies in consistency. This guide enables you to set sharpening angles ranging from 15° to 54° and a range of back bevels from 10° to 20°. It effortlessly accommodates narrow chisels, starting from 6 mm, and blades of various widths, spanning from 12 to 73 mm, with thicknesses up to 9 mm. The blade registration system smoothly glides along the guide, ensuring precise alignment and square positioning of the blade. The blade clamp has fixed positions for preset angles, while a three-position eccentric roller allows for quick and precise micro-bevel sharpening with just one turn of a knob. For users, this guide means rapid and accurate sharpening with consistently repeatable results, reducing wasteful stone and blade usage. Made from die-cast zinc alloy, with brass and steel parts, it includes the standard locking system, a straight base roller, and an angle registration gauge. Proudly crafted in Canada.</p>
    032.421
    VERITAS MK II STANDARD HONING GUIDE Veritas Sharpening

    VERITAS MK II STANDARD HONING GUIDE

    €76.90
  • ,
    5/ 5
    <p>Three fully functional miniature chisels, which are reproduced on a scale of 1:3 compared to the regular Veritas chisels. Only 83 mm long overall, PM-V11 steel blade (61-63 HRC) and ground flat on the face, precious wood handles and stainless steel ferrule. Bevel angle 25°. Not only a nice gift idea or a collector's item: these chisels are extremely helpful where fine, precise cuts are needed. Comes in an elegant leatherette case.</p> <p>Overall length 83 mm</p> <p>Blade thickness 2.4 mm</p> <p>Blade width 3 / 6 / 9.5 mm</p> <p></p>
    025.214
    Veritas Miniature Chisels Veritas Chisels

    Veritas Miniature Chisels

    €62.90
  • ,
    5/ 5
    <p>Convert your standard Veritas Sharpening System II into a self-centring double jaw honing guide. Simply replace the standard clamping unit by the double jaw clamp and you're done! The double jaw honing device allows for the precise and easy sharpening of even the narrowest chisels, mortise chisels or plane blades while exactly maintaining an angle of 90°. Also suitable for short Japanese blades. Fits Veritas Sharpening System II and Camber Roller Assembly </p> <p>Max. blade width 38 mm</p> <p>Max. blade thickness 12 mm</p> <p></p>
    032.306
    Veritas Narrow Blade Clamp for Veritas Sharpening System II Veritas Sharpening

    Veritas Narrow Blade Clamp for Veritas Sharpening System II

    €68.90
  • ,
    5/ 5
    <p>This mount enables easier sharpening of short blades such as spokeshaves, reversing blades or small violin planes. Two magnets and a moveable fence hold the blades securely, the die-cast aluminium handle extends the blade and enables controlled sharpening, either by hand or with the Veritas sharpening system I. 102 x 38 x 10 mm.</p> <p></p>
    032.296
    Veritas Sharpening Device, for Small Plane Blades Veritas Sharpening

    Veritas Sharpening Device, for Small Plane Blades

    €29.90
  • ,
    5/ 5
    <p>This accessory guide with barrel-shaped roller allows for honing slight curves into plane blade edges whilst still maintaining an accurate and consistent bevel angle. Simply replace the standard roller assembly of the Veritas sharpening system II by this camber assembly and apply gentle pressure to the sides of the blade when sharpening. Slightly cambered plane blades are mainly used on smoothing planes to avoid planing marks made by projective corners and to produce an even grain. Not suitable for scrub plane blades. Fits Veritas Sharpening System II</p> <p></p>
    032.288
    Camber Roller Assembly for Veritas Sharpening System II Veritas Sharpening

    Camber Roller Assembly for Veritas Sharpening System II

    €34.90
  • ,
    5/ 5
    <p>The blade is automatically centred within two grooved holding jaws that feature two blade-clamping positions. The three-point holding jaws also make it possible to clamp irregular shapes, such as a rabbet plane blade. Minimum blade width 3 mm.</p> <p>Max. blade width 63.5 mm</p> <p></p>
    032.285
    Veritas Side-Clamping Honing Guide Veritas Sharpening

    Veritas Side-Clamping Honing Guide

    €73.90
  • ,
    5/ 5
    <p>With laser-etched degree scale for setting the correct angle of inclination on the blade.</p> <p></p>
    032.265
    Veritas Sharpening System II Adapter for Sharpening Skew-Edged Blades Veritas Sharpening

    Veritas Sharpening System II Adapter for Sharpening Skew-Edged Blades

    €46.90
  • ,
    5/ 5
    <p>This adapter extends the clamping height of the Veritas Sharpening System II for clamping mortise chisels with up to 18 mm blade thickness. By opening the brass screw on the top of the sharpening aid, you can insert the adapter and fasten it with the same screw. Fits Veritas Sharpening System II with Narrow Blade Honing Guide </p> <p></p>
    032.260
    Veritas Adapter for Sharpening System II, Mortise Chisel Veritas Sharpening

    Veritas Adapter for Sharpening System II, Mortise Chisel

    €16.90
  • ,
    5/ 5
    <p>Clamp the blade in the guide and set the desired bevel angle using the angle jig. The sharpening is done on a bench stone. The wide roller assures stability and preserves the surface of the stone. The tappet screw allows honing to a second (micro) bevel without having to reclamp the blade. Set, honing guide and angle jig.</p> <p>Max. blade width 60 mm</p> <p>Max. blade thickness 15 mm</p> <p></p>
    032.256
    Veritas Sharpening System I Veritas Home

    Veritas Sharpening System I

    €81.90
  • ,
    5/ 5
    023.080
    VERITAS Miniature Spokeshave - Flat Blade Veritas Planes

    VERITAS Miniature Spokeshave - Flat Blade

    €60.90
  • ,
    5/ 5
    <p>A high-precision guide for accurate and consistent perpendicular sharpening of all straight-edged blades. Also suitable for short, irregular and tapered Japanese blades. The adjustable brass roller allows for increasing the angle of inclination by up to 2° when creating a micro bevel without unclamping the tool. Aluminium body, easy-gliding brass roller. Quickly adjustable gauge with grip. Instructions included.</p> <p>Bevel angle 15°-54°, counter chamfer 10°-20°.</p> <p>Max. blade width 72 mm</p> <p>Max. blade thickness 12 mm</p> <p></p>
    032.059
    Veritas Sharpening System II, Standard Veritas Sharpening

    Veritas Sharpening System II, Standard

    €77.00
  • ,
    5/ 5
    <p>Standard block plane 20°. For heavier cuts with the grain. Bevel angle 25°. Results in a normal cutting angle of 45°.</p> <p>PM-V11 Steel</p> <p>PM-V11 steel is made from a new, powder metallurgy steel alloy. With its ultra-fine and homogeneous material structure and extreme hardness (HRC 61-63), this steel has double the edge-retention capacity of A2 steel. The extremely hard-wearing blades allow a razor-sharp edge and are highly durable even at a bevel angle of less than 20°. All blades come with a 2° microbevel and can be sharpened on conventional waterstones.</p> <p>Compact all-round plane for fine shavings. The mouth opening can be adjusted according to the application, using the configurable shoe (for removing thick or thin shavings). The indentations in the sides make it easier to guide this handy plane accurately. Central setscrew for blade depth and lateral adjustment. Please note: The plane is supplied in two parts (plane body and blade).</p> <p>Veritas Planes</p> <p>The corporate philosophy of Canadian tool manufacturer Veritas aims to develop new adjustment mechanisms and enhance historic plane design. With bodies made of stress-relieved spheroidal cast iron, these tools are highly resistant to cracking and distortion. Their soles are perfectly plane and trued at right angles to the sides. Their thick blades of high-strength A2 steel are hardened to 60-62 HRC and additionally subjected to a special low-temperature process to achieve a finer grain. Veritas planes are optionally available with PM-V11 blades. (The Custom series models are equipped with PM-V11 blades as standard). Two setscrews on the sides constrain the blade laterally, keeping it in place regardless of the type of stress applied. Unless otherwise stated, the blade is angled at 45°. With their material combination of finely-ground or black-coated cast iron bodies, polished brass setscrews and beautiful torrefied maple handles, these planes are also pleasing to the eye</p> <p>Blade material PM-V11™</p> <p>Blade width 41 mm</p> <p>Blade thickness 3.2 mm</p> <p>Overall length 160 mm</p> <p>Weight 800 g</p> <p>Blade angle 20 °</p> <p></p>
    023.020
    VERITAS Block Plane PM-V11® Veritas Planes

    VERITAS Block Plane PM-V11®

    €269.90

    Standard block plane 20°. For heavier cuts with the grain. Bevel angle 25°. Results in a normal cutting angle of 45°.

  • ,
    5/ 5
    <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">This version of the low-angle block plane is about a third the size of the original Veritas block plane.</span></p> <p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us"> </span></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">At just under 64 mm (2-1/2 inch) long and 19 mm (3/4 inch) wide, it is a useful size for small-scale work or where a larger plane would be difficult to use. The low 12° bed angle combined with the 25° blade bevel gives it a cutting angle of 37°, making it also suitable for end-grain use.</span></p> <p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us"> </span></p> <p><span lang="en-us" style="font-size:11pt;line-height:107%;font-family:Calibri, 'sans-serif';" xml:lang="en-us">The stainless-steel Norris-style adjuster lets you set the 12.7 mm (1/2 inch) wide A2 blade (1.5 mm thick) with precision. The body is made from investment-cast stainless steel, and has a fixed mouth, machined sides and a ground sole. Weighs 50 g (1.7 oz).</span></p>
    023.008
    VERITAS Miniature Block Plane - Blade 12,7 mm Veritas Planes

    VERITAS Miniature Block Plane - Blade 12,7 mm

    €77.90
  • ,
    5/ 5
    <p>This multifunctional deluxe set allows for the precise and easy sharpening of nearly all tool blades, whether they have straight or slightly rounded cutting edges, whether the blade width is 2 mm or 72 mm.</p> <p>The set includes:</p> <p>Standard clamping unit for cutting tool edges up to 72 mm width, also suited for blades with bevel or chamfered edges</p> <p>Double jaw clamp, suited for the narrowest chisels, mortise chisels or plane blades; the lateral clamping ensures precise perpendicular sharpening, especially for narrow blades with straight edges; max. blade width 38 mm</p> <p>Sharpening device with straight roller, suited for sharpening straight edges</p> <p>Sharpening device with barrel-shaped roller for sharpening and honing slight curves, e.g. for smoothing plane blades</p> <p>Setting gauge with fence for bevel angle 15°-54° (with double jaw honing device 15°-40°), counter chamfer 10°-20°</p> <p>The adjustable brass roller allows for increasing the angle of inclination by up to 2° when creating a micro bevel without unclamping the tool. Made of die-cast aluminium, easy-gliding brass roller.</p> <p></p> <p>Max. blade width 72 / 38 mm</p> <p>Max. blade thickness 12 mm</p> <p></p>
    032.307
    Veritas Deluxe Honing Guide System II, 5-Piece Set Veritas Sharpening

    Veritas Deluxe Honing Guide System II, 5-Piece Set

    €159.00