List of products by brand M Power Tools

M Power Tools online shop: hand tools for woodworking

Active filters

  • ,
    5/ 5
    <p>This sharpening system allows the sharpening of bevels of 25° and 30° on one side and 27° and 32° on the opposite side, thus allowing the grinding of a micro bevel. Suitable for plane blades and chisels, without requiring time-consuming adjustments. The dry grinding system means it can be used irrespective of environmental conditions. Hence, it is ideal for use on construction sites and anywhere where quick results are needed without requiring maximum sharpness.</p> <p>Insertion of the magnetically attached diamond stone with corresponding grit</p> <p>Insertion of slide with alignment for 25° and 30° bevel angles or 27°and 32° bevel angles</p> <p>Insertion of plane blade/chisel and fixing in place at stop against counter-pressure</p> <p>Grinding of bevel angle by moving the slide</p> <p>Where necessary, removal of the burr on the back of the blade</p> <p></p> <p>Tool support and slide are made of solid milled and anodised aluminium with dovetail guide and wear-resistant nylon slide rail.</p> <p>M. Power Tools DC Diamond Stones</p> <p>Diamond Cross (DC) sharpening stones offer an excellent price/performance ratio with a high manufacturing quality. The lapping of the supporting plates and the stringent quality controls are performed at the company's headquarters in England.</p> <p>Monocrystalline* diamond particles guarantee a long service life and excellent material removal</p> <p>Uniform grit sizes and a dense diamond distribution for even grinding patterns</p> <p>Cross-shaped recesses prevent clogging due to grinding debris</p> <p>Permanently flat and warp-free thanks to specially lapped supporting plates made of steel with a stainless steel matrix</p> <p>Monocrystalline* diamond-coated sharpening devices:</p> <p>Diamond-coated sharpening devices remain permanently flat, and are especially suitable for tools with straight blades, as well as for producing flat surfaces (e.g. backs of plane and chisel blades, plane soles, scrapers). Also suitable for carbide coated cutters, tool steels, HSS and non-metal materials (glass, ceramic, etc.). We recommend moistening diamond-coated sharpening devices with water and grinding with little pressure.</p> <p>* Monocrystalline diamonds are significantly more wear resistant than the polycrystalline diamonds used to make lesser quality diamond sharpening tools.</p> <p>Scope of delivery</p> <p></p> <p>Fasttrack MK2 sharpening system, 1 x diamond stone medium-coarse, 1 x diamond stone medium-fine, cleaning block, removable fence, non-slip mat.</p> <p> </p> <p>Max. blade width 64 mm</p> <p></p>
    032.352
    M. Power Tools DC Fasttrack MK2 Sharpening System M Power Tools Sharpening

    M. Power Tools DC Fasttrack MK2 Sharpening System

    €116.31
  • ,
    5/ 5
    <p>The lapping fluid can be used instead of water when working with diamond-coated sharpening systems. The positive properties of the lapping fluid considerably improve the grinding result, reliably prevent rust and corrosion and also have an excellent cleaning effect. </p> <p></p> <p>Hazard statement</p> <p>Causes skin irritation. May cause damage to organs.</p> <p></p>
    032.202
    M. Power Tools DC Diamond Stone Lapping Fluid, 100 ml M Power Tools Sharpening

    M. Power Tools DC Diamond Stone Lapping Fluid, 100 ml

    €8.11
  • ,
    5/ 5
    <p>Bench stone with two opposing plates with different grits. Ideal for trueing and for sharpening cutting tools. Includes two magnetic, rubber coated stone holders, cleaning block and storage pouch.</p> <p>M. Power Tools DC Diamond Stones</p> <p>Diamond Cross (DC) sharpening stones offer an excellent price/performance ratio with a high manufacturing quality. The lapping of the supporting plates and the stringent quality controls are performed at the company's headquarters in England.</p> <p>Monocrystalline* diamond particles guarantee a long service life and excellent material removal</p> <p>Uniform grit sizes and a dense diamond distribution for even grinding patterns</p> <p>Wave-shaped recesses prevent clogging due to grinding debris</p> <p>Permanently flat and warp-free thanks to specially lapped supporting plates made of steel with a stainless steel matrix</p> <p>Monocrystalline* diamond-coated sharpening devices:</p> <p>Diamond-coated sharpening devices remain permanently flat, and are especially suitable for tools with straight blades, as well as for producing flat surfaces (e.g. backs of plane and chisel blades, plane soles, scrapers). Also suitable for carbide coated cutters, tool steels, HSS and non-metal materials (glass, ceramic, etc.). We recommend moistening diamond-coated sharpening devices with water and grinding with little pressure.</p> <p>* Monocrystalline diamonds are significantly more wear resistant than the polycrystalline diamonds used to make lower quality diamond sharpening tools.</p> <p></p> <p>Grit extra-fine/coarse</p> <p>Dimensions 203 x 70 x 7 mm</p> <p></p>
    032.098
    M. Power Tools DC Bench Stone, Extra Fine/Coarse M Power Tools Sharpening

    M. Power Tools DC Bench Stone, Extra Fine/Coarse

    €82.70
  • ,
    5/ 5
    <p>For de-burring the mirror side of chisels after sharpening. Self-adhesive. Fits No. 740830.</p> <p>M. Power Tools DC Diamond Stones</p> <p>Diamond Cross (DC) sharpening stones offer an excellent price/performance ratio with a high manufacturing quality. The lapping of the supporting plates and the stringent quality controls are performed at the company's headquarters in England.</p> <p>Monocrystalline* diamond particles guarantee a long service life and excellent material removal</p> <p>Uniform grit sizes and a dense diamond distribution for even grinding patterns</p> <p>Cross-shaped recesses prevent clogging due to grinding debris</p> <p>Permanently flat and warp-free thanks to specially lapped supporting plates made of steel with a stainless steel matrix</p> <p>3 year warranty for material and manufacturing defects! (damage from improper use is not covered by this warranty)</p> <p>Monocrystalline* diamond-coated sharpening devices:</p> <p>Diamond-coated sharpening devices remain permanently flat, and are especially suitable for tools with straight blades, as well as for producing flat surfaces (e.g. backs of plane and chisel blades, plane soles, scrapers). Also suitable for carbide coated cutters, tool steels, HSS and non-metal materials (glass, ceramic, etc.). We recommend moistening diamond-coated sharpening devices with water and grinding with little pressure.</p> <p>* Monocrystalline diamonds are significantly more wear resistant than the polycrystalline diamonds used to make lower quality diamond sharpening tools.</p> <p>Grit:  extra-fine</p> <p></p>
    032.357
    M. Power Tools DC Fasttrack De-Burring Plate, Extra-Fine M Power Tools Sharpening

    M. Power Tools DC Fasttrack De-Burring Plate, Extra-Fine

    €14.67
  • ,
    5/ 5
    032.354
    M. Power Tools DC Replacement Polishing Wax M Power Tools Sharpening

    M. Power Tools DC Replacement Polishing Wax

    €7.30
  • ,
    5/ 5
    <p>Ideal for trueing and for the sharpening of cutting tools. Includes two stone holders to screw onto the sharpening table, cleaning block, 30 ml lapping fluid, leather honing strop block for covering the stone, polishing wax and a storage case.</p> <p>M. Power Tools DC Diamond Stones</p> <p>Diamond Cross (DC) sharpening stones offer an excellent price/performance ratio with a high manufacturing quality. The lapping of the supporting plates and the stringent quality controls are performed at the company's headquarters in England.</p> <p>Monocrystalline* diamond particles guarantee a long service life and excellent material removal</p> <p>Uniform grit sizes and a dense diamond distribution for even grinding patterns</p> <p>Wave-shaped recesses prevent clogging due to grinding debris</p> <p>Permanently flat and warp-free thanks to specially lapped supporting plates made of steel with a stainless steel matrix</p> <p>Monocrystalline* diamond-coated sharpening devices:</p> <p>Diamond-coated sharpening devices remain permanently flat, and are especially suitable for tools with straight blades, as well as for producing flat surfaces (e.g. backs of plane and chisel blades, plane soles, scrapers). Also suitable for carbide coated cutters, tool steels, HSS and non-metal materials (glass, ceramic, etc.). We recommend moistening diamond-coated sharpening devices with water and grinding with little pressure.</p> <p>* Monocrystalline diamonds are significantly more wear resistant than the polycrystalline diamonds used to make lower quality diamond sharpening tools.</p> <p> </p> <p>Dimensions 202 x 70 x 11 mm</p> <p></p> <p></p>
    032.153
    M. Power Tools DC Bench Stones, set M Power Tools Sharpening

    M. Power Tools DC Bench Stones, set

    €68.77