List of products by brand Pfeil
Shop online pfeil carving tools
Showing 1-12 of 12 item(s)
-
Grandi Liutai Italiani,
5/
5
<p>Compact flat iron with tapered blade in quality tool steel (63 HRC), for the construction of arches. Handle in boxwood.</p>
<p></p>
<p>Blade length 50mm</p>
<p></p>
044.114
€39.90
-
Grandi Liutai Italiani,
5/
5
<p>The shaft and blade are forged from a single piece, finely ground and polished.</p>
<p>Spoon Gouges</p>
<p>With a bent blade and inside bevel for carving the tops and backs of stringed instruments.</p>
<p>Sweep 5</p>
<p>Blade width 30 mm</p>
<p>Overall length 310 mm</p>
021.274
€89.90
With a bent blade and inside bevel for carving the tops and backs of stringed instruments.
-
Grandi Liutai Italiani,
5/
5
<p>Length 160 mm, ferrule Ø 24 mm.</p>
<p>Swiss hornbeam handles, fitted with top and bottom ferrules.</p>
<p></p>
025.257
€14.90
-
Grandi Liutai Italiani,
5/
5
<p>Length 135 mm, ferrule Ø 24 mm.</p>
<p>Swiss hornbeam handles, fitted with top and bottom ferrules.</p>
<p></p>
025.256
€8.90
-
Grandi Liutai Italiani,
5/
5
<p>12-piece set in a leather tool roll: 4 / 6 / 8 / 10 / 12 / 16 / 20 / 26 / 30 / 32 / 35 / 40 mm</p>
<p>Precision-made chisels with a traditional design. Forged from a chrome-vanadium steel alloy, heat-treated in an electric furnace, then ground and polished by hand. The high quality of these chisels is noticeable in their uniform hardness (approx. 60 HRC) and homogeneous fine mirror polish. The blades come pre-sharpened, ready to use, and fitted with unvarnished hornbeam handles.</p>
<p>Blade length 95-105 mm</p>
<p>Overall length 260-280 mm</p>
<p>Blade thickness 2.5-4.5 mm</p>
<p>Version 12-Piece Set in Leather Tool Roll</p>
<p>Blade width 4 / 6 / 8 / 10 / 12 / 16 / 20 / 26 / 30 / 32 / 35 / 40 mm</p>
<p></p>
025.186
€371.10
-
Grandi Liutai Italiani,
5/
5
<p>6-piece set in a leather tool roll: 6 / 10 / 12 / 20 / 26 / 30 mm</p>
<p>Precision-made chisels with a traditional design. Forged from a chrome-vanadium steel alloy, heat-treated in an electric furnace, then ground and polished by hand. The high quality of these chisels is noticeable in their uniform hardness (approx. 60 HRC) and homogeneous fine mirror polish. The blades come pre-sharpened, ready to use, and fitted with unvarnished hornbeam handles.</p>
<p>Blade length 95-105 mm</p>
<p>Overall length 260-280 mm</p>
<p>Blade thickness 2.5-4.5 mm</p>
<p>Version 6-Piece Set in Leather Tool Roll</p>
<p>Blade width 6 / 10 / 12 / 20 / 26 / 30 mm</p>
<p></p>
025.185
€196.90
-
Grandi Liutai Italiani,
5/
5
<p>6-piece set in beechwood case: 6 / 10 / 12 / 16 / 20 / 26 mm</p>
<p>Precision-made chisels with a traditional design. Forged from a chrome-vanadium steel alloy, heat-treated in an electric furnace, then ground and polished by hand. The high quality of these chisels is noticeable in their uniform hardness (approx. 60 HRC) and homogeneous fine mirror polish. The blades come pre-sharpened, ready to use, and fitted with unvarnished hornbeam handles.</p>
<p>Blade length 95-105 mm</p>
<p>Overall length 260-280 mm</p>
<p>Blade thickness 2.5-4.5 mm</p>
<p>Version 6-Piece Set in Beechwood Case</p>
<p>Blade width 6 / 10 / 12 / 16 / 20 / 26 mm</p>
<p></p>
025.184
€184.90
-
Grandi Liutai Italiani,
5/
5
<p>Precision-made chisels with a traditional design. Forged from a chrome-vanadium steel alloy, heat-treated in an electric furnace, then ground and polished by hand. The high quality of these chisels is noticeable in their uniform hardness (approx. 60 HRC) and homogeneous fine mirror polish. The blades come pre-sharpened, ready to use, and fitted with unvarnished hornbeam handles.</p>
<p>Blade length 95-105 mm</p>
<p>Overall length 260-280 mm</p>
<p>Blade thickness 2.5-4.5 mm</p>
<p>Version Single Chisel</p>
<p>Blade width 4 mm</p>
<p></p>
025.172
€23.90
-
Grandi Liutai Italiani,
5/
5
<p>1 marking knife and 6 chisels in wooden box: 6 / 10 / 12 / 16 / 20 / 26 mm</p>
<p>These perfectly shaped paring chisels and the marking knife made of chrome-vanadium steel are hardened to approx. 60 HRC. The oval shape of the octagonal oiled elm wood handle near the chisel provides a comfortable, non-slip grip. Due to the bevelled sides and the trapezoidal cross-section, these chisels are ideal for finishing wood joints, such as dovetails or mortise holes. The marking knife, equipped with an oiled walnut handle and a finger groove in the front, provides a comfortable grip and, thanks to the prism blade, can be used for cutting against right- or left-hand stops. Suitable for right- and left-handed use.</p>
<p>Blade length 100 mm</p>
<p>Overall length 265 mm</p>
<p>Blade thickness 3-5 mm</p>
<p>Version 7-piece set, in a wooden case</p>
<p>Blade width 6 / 10 / 12 / 16 / 20 / 26 mm</p>
<p></p>
025.113
€230.10
-
Grandi Liutai Italiani,
5/
5
<p>The long bent form is used in curved recesses to allow you to cut out of the piece from the deepest point without damaging the edges of recess.</p>
<p></p>
<p>With over 700 forms and sweeps, Pfeil offers the largest and most variable product range. The products of the world’s leading manufacture of fine carving tools are made from specially alloyed, hard tool steel, forged and ground on precision machines, heat-treated in an electric furnace. The blades are uniformly hardened to 59-61 HRC along their entire length, the break-proof oiled ash handles are mounted with inner ferrules. Only indigenous woods and solvent-free oils are used.</p>
<p></p>
<p>Overall length +/- 250 mm</p>
<p>Blade length +/- 120 mm</p>
<p></p>
021.200
€36.00
The long bent form is used in curved recesses to allow you to cut out of the piece from the deepest point without damaging the edges of recess.
-
Grandi Liutai Italiani,
5/
5
<p>Very precise Purfling Channel Cleaner thanks to its forged blade.</p>
<p></p>
038.024
€59.90
-
Grandi Liutai Italiani,
5/
5
<p>Gouges are used for anything from rough work to shaping and finishing, and are therefore the most versatile sculptor's tools. If necessary, each of these gouges can also be used the other way round to work on convex surfaces. </p>
<p>Pfeil Carving Tools</p>
<p>With over 700 forms and sweeps, Pfeil offers the largest and most variable product range. The products of the world’s leading manufacture of fine carving tools are made from specially alloyed, hard tool steel, forged and ground on precision machines, heat-treated in an electric furnace. The blades are uniformly hardened to 59-61 HRC along their entire length, the break-proof oiled ash handles are mounted with inner ferrules. Only indigenous woods and solvent-free oils are used.</p>
<p></p>
<p>Overall length 250 mm</p>
<p>Blade length 120 mm</p>
021.209
€30.00