List of products by brand NT Dresser

Shop online NT Dresser precision hand sanders

Active filters

  • ,
    5/ 5
    <p>This abrasive tool comprises a plastic handle with diverse available shapes and a replaceable metal plate for abrasion. These files are highly user-friendly and effortless to operate. The long-lasting abrasive surface of the metal plates performs exceptionally well over its entire lifespan. The Japanese manufacturer specifies a grit range of 280 to 400, classified as medium according to the Japanese standard, approximately corresponding to 240 grit in European standards. Nevertheless, since the tool employs a metal plate rather than traditional sandpaper, the numerical value serves only as an approximation to convey a sense of the magnitude</p>
    031.317
    Replacement trapezoidal rounded sanding plate 85 x 25 mm, radius from 1.5 mm to 12.5 mm NT Dresser Rasps

    Replacement trapezoidal rounded sanding plate 85 x 25 mm, radius from 1.5 mm to 12.5 mm

    €11.72
  • ,
    5/ 5
    <p>This abrasive tool comprises a plastic handle with diverse available shapes and a replaceable metal plate for abrasion. These files are highly user-friendly and effortless to operate. The long-lasting abrasive surface of the metal plates performs exceptionally well over its entire lifespan. The Japanese manufacturer specifies a grit range of 280 to 400, classified as medium according to the Japanese standard, approximately corresponding to 240 grit in European standards. Nevertheless, since the tool employs a metal plate rather than traditional sandpaper, the numerical value serves only as an approximation to convey a sense of the magnitude</p>
    031.316
    Replacement rectangular rounded Small sanding plate 85 x 8.5 mm, radius 5 mm mm NT Dresser Rasps

    Replacement rectangular rounded Small sanding plate 85 x 8.5 mm, radius 5 mm mm

    €9.26
  • ,
    5/ 5
    <p>Questo sistema abrasivo è costituito da un manico in plastica disponibile in varie forme e da una lastra metallica abrasiva sostituibile. Queste lime sono estremamente comode e facili da utilizzare. La superficie abrasiva delle lastre metalliche ha una lunga durata e funziona molto bene per tutto il suo ciclo di vita. Il produttore giapponese indica una grana tra 280 e 400, considerata media secondo lo standard giapponese, approssimativamente equivalente a una grana 240 negli standard europei. Tuttavia, poiché lo strumento utilizza una lastra metallica anziché carta abrasiva tradizionale, il numero è solo indicativo per fornire un'idea dell'ordine di grandezza</p>
    031.315
    Replacement Large Flat Rectangular Abrasive Plate NT-Dresser 152 x 51 mm NT Dresser Rasps

    Replacement Large Flat Rectangular Abrasive Plate NT-Dresser 152 x 51 mm

    €14.26
  • ,
    5/ 5
    <p>This abrasive tool comprises a plastic handle with diverse available shapes and a replaceable metal plate for abrasion. These files are highly user-friendly and effortless to operate. The long-lasting abrasive surface of the metal plates performs exceptionally well over its entire lifespan. The Japanese manufacturer specifies a grit range of 280 to 400, classified as medium according to the Japanese standard, approximately corresponding to 240 grit in European standards. Nevertheless, since the tool employs a metal plate rather than traditional sandpaper, the numerical value serves only as an approximation to convey a sense of the magnitude</p>
    031.314
    Replacement Flat Rectangular Abrasive Plate NT-Dresser 152 x 24 mm NT Dresser Rasps

    Replacement Flat Rectangular Abrasive Plate NT-Dresser 152 x 24 mm

    €9.26
  • ,
    5/ 5
    <p>This abrasive tool comprises a plastic handle with diverse available shapes and a replaceable metal plate for abrasion. These files are highly user-friendly and effortless to operate. The long-lasting abrasive surface of the metal plates performs exceptionally well over its entire lifespan. The Japanese manufacturer specifies a grit range of 280 to 400, classified as medium according to the Japanese standard, approximately corresponding to 240 grit in European standards. Nevertheless, since the tool employs a metal plate rather than traditional sandpaper, the numerical value serves only as an approximation to convey a sense of the magnitude.</p>
    031.313
    Replacement Flat Trapezoidal Abrasive Plate NT-Dresser 83 x 28 x 7 mm NT Dresser Rasps

    Replacement Flat Trapezoidal Abrasive Plate NT-Dresser 83 x 28 x 7 mm

    €6.80
  • ,
    5/ 5
    <p>This abrasive tool comprises a plastic handle with diverse available shapes and a replaceable metal plate for abrasion. These files are highly user-friendly and effortless to operate. The long-lasting abrasive surface of the metal plates performs exceptionally well over its entire lifespan. The Japanese manufacturer specifies a grit range of 280 to 400, classified as medium according to the Japanese standard, approximately corresponding to 240 grit in European standards. Nevertheless, since the tool employs a metal plate rather than traditional sandpaper, the numerical value serves only as an approximation to convey a sense of the magnitude</p>
    031.312
    Flat Trapezoidal NT-Dresser System 83 x 28 x 7 mm NT Dresser Rasps

    Flat Trapezoidal NT-Dresser System 83 x 28 x 7 mm

    €13.03
  • ,
    5/ 5
    <p>This abrasive tool comprises a plastic handle with diverse available shapes and a replaceable metal plate for abrasion. These files are highly user-friendly and effortless to operate. The long-lasting abrasive surface of the metal plates performs exceptionally well over its entire lifespan. The Japanese manufacturer specifies a grit range of 280 to 400, classified as medium according to the Japanese standard, approximately corresponding to 240 grit in European standards. Nevertheless, since the tool employs a metal plate rather than traditional sandpaper, the numerical value serves only as an approximation to convey a sense of the magnitude.</p>
    031.311
    Medium Rectangular Abrasive System NT-Dresser 152 x 24 mm NT Dresser Rasps

    Medium Rectangular Abrasive System NT-Dresser 152 x 24 mm

    €18.61
  • ,
    5/ 5
    <p>This abrasive tool comprises a plastic handle with diverse available shapes and a replaceable metal plate for abrasion. These files are highly user-friendly and effortless to operate. The long-lasting abrasive surface of the metal plates performs exceptionally well over its entire lifespan. The Japanese manufacturer specifies a grit range of 280 to 400, classified as medium according to the Japanese standard, approximately corresponding to 240 grit in European standards. Nevertheless, since the tool employs a metal plate rather than traditional sandpaper, the numerical value serves only as an approximation to convey a sense of the magnitude.</p>
    031.310
    Wide Rectangular Abrasive System NT-Dresser 152 x 51 mm NT Dresser Rasps

    Wide Rectangular Abrasive System NT-Dresser 152 x 51 mm

    €17.46
  • ,
    5/ 5
    <p>This abrasive tool comprises a plastic handle with diverse available shapes and a replaceable metal plate for abrasion. These files are highly user-friendly and effortless to operate. The long-lasting abrasive surface of the metal plates performs exceptionally well over its entire lifespan. The Japanese manufacturer specifies a grit range of 280 to 400, classified as medium according to the Japanese standard, approximately corresponding to 240 grit in European standards. Nevertheless, since the tool employs a metal plate rather than traditional sandpaper, the numerical value serves only as an approximation to convey a sense of the magnitude.</p>
    031.309
    Narrow Rectangular Rounded NT-Dresser System 85 x 8.5 mm, 5 mm radius NT Dresser Rasps

    Narrow Rectangular Rounded NT-Dresser System 85 x 8.5 mm, 5 mm radius

    €12.70
  • ,
    5/ 5
    <p>This abrasive tool comprises a plastic handle with diverse available shapes and a replaceable metal plate for abrasion. These files are highly user-friendly and effortless to operate. The long-lasting abrasive surface of the metal plates performs exceptionally well over its entire lifespan. The Japanese manufacturer specifies a grit range of 280 to 400, classified as medium according to the Japanese standard, approximately corresponding to 240 grit in European standards. Nevertheless, since the tool employs a metal plate rather than traditional sandpaper, the numerical value serves only as an approximation to convey a sense of the magnitude</p>
    031.308
    Rounded Trapezoidal Abrasive System NT-Dresser 85 x 25 mm, radius from 1.5 mm to 12.5 mm NT Dresser Rasps

    Rounded Trapezoidal Abrasive System NT-Dresser 85 x 25 mm, radius from 1.5 mm to 12.5 mm

    €15.16
  • ,
    5/ 5
    <p>This abrasive tool comprises a plastic handle with diverse available shapes and a replaceable metal plate for abrasion. These files are highly user-friendly and effortless to operate. The long-lasting abrasive surface of the metal plates performs exceptionally well over its entire lifespan. The Japanese manufacturer specifies a grit range of 280 to 400, classified as medium according to the Japanese standard, approximately corresponding to 240 grit in European standards. Nevertheless, since the tool employs a metal plate rather than traditional sandpaper, the numerical value serves only as an approximation to convey a sense of the magnitude.</p>
    031.307
    In English: Rounded Abrasive System NT-Dresser 85 x 24 mm, 12.5 mm radius NT Dresser Rasps

    In English: Rounded Abrasive System NT-Dresser 85 x 24 mm, 12.5 mm radius

    €18.61
  • ,
    5/ 5
    031.231
    Lastra abrasiva piatta trapezoidale con sistema NT-Dresser 83 x 28 x 7 mm NT Dresser Home

    Lastra abrasiva piatta trapezoidale con sistema NT-Dresser 83 x 28 x 7 mm

    €13.03
  • ,
    5/ 5
    <p>For fine work in making models and musical instruments, also suitable for deburring aluminium and plastic parts. Ideal for controlled removal of material in hard-to-reach areas, grinds in both directions. Sturdy die-cast aluminium handle, shoe with easy to remove and replaceable hardened steel grinding plate. Sand on a sample piece first. Surface of the sanding pad may leave black stains during first use (anti-corrosion coating). This is no sign of bad quality and only occurs during first contact with wood. Grit approx. 320.</p> <p>Width 50 mm</p> <p>Length 150 mm</p> <p>Model Sanding Shoe Rectangular, Broad</p>
    024.223
    Precision Hand Grinder NT, Sanding Shoe Rectangular, Broad NT Dresser Abrasives

    Precision Hand Grinder NT, Sanding Shoe Rectangular, Broad

    €16.31

    Japanese precision rasp with metal handle - Rectangular, Broad

  • ,
    5/ 5
    <p>For fine work in making models and musical instruments, also suitable for deburring aluminium and plastic parts. Ideal for controlled removal of material in hard-to-reach areas, grinds in both directions. Sturdy die-cast aluminium handle, shoe with easy to remove and replaceable hardened steel grinding plate. Sand on a sample piece first. Surface of the sanding pad may leave black stains during first use (anti-corrosion coating). This is no sign of bad quality and only occurs during first contact with wood. Grit approx. 320.</p> <p>Width 24 mm</p> <p>Length 150 mm</p> <p>Model Sanding Shoe Rectangular, Slim</p>
    024.222
    Precision Hand Grinder NT, Sanding Shoe Rectangular, Slim NT Dresser Abrasives

    Precision Hand Grinder NT, Sanding Shoe Rectangular, Slim

    €13.03

    Japanese precision rasp with metal handle - Rectangular, Slim

  • ,
    5/ 5
    <p>For fine work in making models and musical instruments, also suitable for deburring aluminium and plastic parts. Ideal for controlled removal of material in hard-to-reach areas, grinds in both directions. Sturdy die-cast aluminium handle, shoe with easy to remove and replaceable hardened steel grinding plate. Sand on a sample piece first. Surface of the sanding pad may leave black stains during first use (anti-corrosion coating). This is no sign of bad quality and only occurs during first contact with wood. Grit approx. 320.</p><p>Width 7-28 mm</p><p>Length 80 mm</p><p>Model Sanding Shoe Triangular, Pointed</p>
    024.221
    Precision Hand Grinder NT, Sanding Shoe Triangular, Pointed NT Dresser Nt-dresser

    Precision Hand Grinder NT, Sanding Shoe Triangular, Pointed

    €9.75

    Japanese precision rasp with metal handle -  triangular

  • ,
    5/ 5
    031.092
    Sanding Plate Round Rectangular - 85 mm x 24 mm - Radius 12,5 mm NT Dresser Abrasives

    Sanding Plate Round Rectangular - 85 mm x 24 mm - Radius 12,5 mm

    €11.39

    Rounded plate for sanding wood in all directions

  • ,
    5/ 5
    <p>Stainless steel plate can be cut to size and shape as desired and glued on shelves to make custom abrasive. Specially embossed pattern allowing to be used in any directions. Suitable for finishing wood and light metal surfaces. Size 54 X 86mm.</p>
    031.009
    NT Dresser Abrasive Paper on Stainless Stell - PS-11P Fine - 0.2 mm x 54 mm x 80 mm NT Dresser Abrasives

    NT Dresser Abrasive Paper on Stainless Stell - PS-11P Fine - 0.2 mm x 54 mm x 80 mm

    €10.90

    Steel plate of superfine abrasive. Made in Japan