By buying this product you can collect up to
62
points.
Your cart will total 62
points that can be converted into a voucher of
€0.62.
With this set, you can create the traditional surface protection at home, accurately burnishing knife backs or other metal components. You can also touch up existing finishing, e.g. on rifle shafts, without any problems.
Burnishing creates a protective layer (patina) on a ferrous surface to protect against rust.
Content:
Ballistol Universal Oil, spray 50 ml
Ballistol Robla Cold Degreaser, spray 50 ml
Ballistol Klever Quick Burnishing, bottle 50 ml
2 pairs of nitril disposable gloves
2 goat hair brushes
2 lint-free care cloths
Burnishing is used for corrosion protection. In contrast to other processes, no additional layer is applied to the metal during burnishing, but a mixed oxide layer of FeO and Fe2O3 is created on the surface to protect against corrosion. During the burnishing process, the colour of the surface changes to black or dark blue.
To achieve an even result, the metal must first be treated with a degreaser and possibly also with fine steel wool (grit 00). Then you can start the actual burnishing at a temperature of 20-30 °C. Oil the burnished workpiece overnight to stabilise the burnishing.
Hazard statement
Extremely flammable aerosol. Pressurised container: May burst if heated. Causes skin irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects. May be corrosive to metals. Harmful if swallowed. Causes serious eye irritation.
