TORMEK Gouge Jig SVD-186 R

5/ 5

<p>With two different grits. Comes with Nagura stone. For sharpening.</p> <p>Cerax by Suehiro</p> <p>Cerax is the best-known brand of the Suehiro company. The stones sold under this name have a medium-hard bond and are particularly suitable for high-alloy tool steels but also for low-alloy carbon steels. The coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly. The stone with the base has extra stability and is easy to store. A Nagura stone is used for cleaning and unclogging the surface of the stone and for creating a fine polishing paste. Before use, soak the stones in water for at least 10 minutes, but do not store them in water permanently. White aluminium oxideabrasive.</p> <p>Grit 1000/3000</p> <p>Dimensions 183 x 63 x 32 mm</p> <p>Base with base</p> <p></p>

032.157

5/ 5

<p>For adjusting bevel angles of turning tools and chisels, independently of wheel diameter. Used in combination with jigs (SVD-186 R and SVS-50).</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p></p>

032.339

5/ 5

<p>With concave and convex surfaces, for gouges. Approx. 145 x Ø 54 x Ø 14 mm. Grit 180: green silicon carbide abrasive.</p> <p>King/Sun Tiger</p> <p>Matsunaga is one of the largest manufacturers of sharpening stones in Japan. In the West, these stones are usually known as King stones or Sun Tiger stones. The stones of the King or Sun Tiger series have a relatively soft bond, which allows the abrasives to be continually exposed during use, making the stone highly effective. These stones are particularly suitable for extremely hard, low-alloy carbon steels (White and Blue Paper Steel). Before use, soak the stones in water for at least 15 minutes. They can also be stored in water permanently. Green silicon carbide abrasive is used for 180 grit. </p> <p></p> <p></p>

032.218

5/ 5

<p>With diamond tip, for trueing ingrained or unround grinding wheels.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p></p>

032.413

5/ 5

<p>Shaping stone with good sharpening qualities. Silicon carbide abrasive.</p> <p>Traditional Stone by Naniwa</p> <p>This stone series is suitable for sharpening blunt knives and tool blades. The stone has a relatively hard bond, it therefore stays flat for a longer time. It is ideal for high-alloy tool steels, but also for low-alloy carbon steels. The tool steels made of alloy components with a coarse grain structure (e.g. chromium and vanadium) require a stone that does not wear quickly. Before use, soak the stone for at least 10 minutes. Do not keep it in water permanently.</p> <p>Naniwa has changed the name and the packaging of this sharpening stone series (formerly known as DX Stone). The sharpening stone itself has not been changed.</p> <p>Grit 220</p> <p>Dimensions 210 x 70 x 20 mm</p> <p></p>

032.181

5/ 5

<p>With plastic rollers and a folding angle gauge, incl. sharpening stone and oil.</p> <p>Max. blade width 65 mm</p> <p>Max. blade thickness 9 mm</p> <p>Grit 120 / 240</p> <p></p>

032.259

5/ 5

<p>Maximum precision and solid zinc cast housing</p> <p>The TORMEK T-8 Original takes precision and stability to a completely new level. The new design integrates the previously mounted sleeves for the vertical and horizontal support into the revolutionary fully cast top and frame. The enhanced stability optimises jig guidance and thus the sharpening accuracy.</p> <p>The Tormek DE-250 diamond grinding wheel with a grit size of 1200 provides a very fine grinding surface and is ideal for carving tools, knives, chisels or plane blades. Thanks to the additional grinding surface on the side, a straight bevel can be ground into the tool without hollow grinding. For sharpening on the side of the diamond grinding wheel, we recommend the Tormek Multi Base (MB-100) with the appropriate sharpening device for the respective tool.</p> <p>Sharpening wheel ""Tormek DE-250"", grit 1200, Ø 250 x 50 mm; leather honing wheel Ø 215 x 30 mm; universal support with fine adjustment (can be used horizontally or vertically). 230 V, 200 W, 90 rpm, torque 14.7 Nm, 14.8 kg.</p> <p>Includes:</p> <p>Square Edge Jig (SE-77)</p> <p>Adjustable Trueing Tool (TT-50) and Stone Grader (SP-650) for purchasing additional standard sharpening wheels (water stones)</p> <p>Anti-corrosion Concentrate, 150 ml (ACC-150)</p> <p>Pro Angle Master (WM-200)</p> <p>Honing Compound (PA-70)</p> <p>Handbook (HB-10)</p> <p>Instruction Video (DVD-1)</p> <p>Edge marker (EM-15)</p> <p>Comes with Tormek manual in German language.</p> <p>Tormek Sharpening System</p> <p>Proven for many years and constantly perfected wet working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.</p> <p>The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The offset front end can also be used for flat honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.</p> <p>A summary of the advantages of Tormek sharpening machines</p> <p>Longer working life of T-8 and T-4 Original:</p> <p>Stainless steel spindle with EzyLock-System for easier stone assembling</p> <p>Solid zinc cast housing with integrated vertical and horizontal support</p> <p>Better motor insulation</p> <p></p> <p>Additional advantages of T-8 Original:</p> <p>Electrophoretic dip painted casing, zinc cast housing frame and robust ABS plastic sides for better corrosion protection</p> <p>Silent running, maintenance free motor, designed for continuous operation, 25 000 hour life</p> <p>Improved water container with screw lift for easy positioning, overspill rim, drip-off plate, magnetic swarf collector and magnetic cleaning scraper</p> <p></p>

032.325

5/ 5

<p>Fits models 2000 - 2006 and T7. </p> <p></p>

032.412

5/ 5

<p>Bench stone</p> <p>A very fine grit sediment stone from the Kyoto region. Perfect for removing burr and polishing hand-forged plane blades, chisels and knife blades made of carbon steel. Ground flat on one side.</p> <p>Grit 10 000-15 000</p> <p>Dimensions 175 x 60 x 10 mm</p> <p></p>

032.361

5/ 5

<p>Polishing emulsion with diamond particles for polishing or stropping knives and razors, as well as chisels or plane blades. Fits Jende Nanocloth acrylic strop block or leather honing strop block. To apply the emulsion, we recommend removing the pump cover, tipping the emulsion onto the strop block and spreading it evenly with a finger.</p> <p>Grit 4 Micron</p> <p></p>

032.276

5/ 5

<p>Machine including three waterstones (grits 280, 1000 and 6000).</p> <p>Shinko Sharpening Machine</p> <p>The Shinko sharpening system enables the achievement of professional sharpening results. Clogging rarely occurs with the open-pored Japanese waterstones. Water cooling and plane-honing produces long-lasting and strong edges. Because no heat is generated, the blade can be held very close to its edge and guided very accurately. No sparks are produced, allowing the device to be safely operated in workshops and instructional settings. The stone surrounding foam ring is easily pressed down when sharpening long blades.</p> <p>Sharpening wheel:</p> <p>Japanese waterstone, grit 1000, Ø 180 x Ø 70 mm, thickness 20 mm, steel mount, wheel nut, splashguard.</p> <p>Motor: 220 V, 125 W, 50/60 Hz, 450 rpm gear-driven.</p> <p>Casing: Plastic, tool rest adjustable in height and angle. Water container with valve, drain tube.</p> <p>Overall weight approx. 5.5 kg.</p> <p></p>

032.327

5/ 5

<p>Linen, suitable for Tormek T-7 and T-8.</p> <p></p>

032.411

5/ 5

<p>Ideal for trueing and for the sharpening of cutting tools. Includes two stone holders to screw onto the sharpening table, cleaning block, 30 ml lapping fluid, leather honing strop block for covering the stone, polishing wax and a storage case.</p> <p>M. Power Tools DC Diamond Stones</p> <p>Diamond Cross (DC) sharpening stones offer an excellent price/performance ratio with a high manufacturing quality. The lapping of the supporting plates and the stringent quality controls are performed at the company's headquarters in England.</p> <p>Monocrystalline* diamond particles guarantee a long service life and excellent material removal</p> <p>Uniform grit sizes and a dense diamond distribution for even grinding patterns</p> <p>Wave-shaped recesses prevent clogging due to grinding debris</p> <p>Permanently flat and warp-free thanks to specially lapped supporting plates made of steel with a stainless steel matrix</p> <p>Monocrystalline* diamond-coated sharpening devices:</p> <p>Diamond-coated sharpening devices remain permanently flat, and are especially suitable for tools with straight blades, as well as for producing flat surfaces (e.g. backs of plane and chisel blades, plane soles, scrapers). Also suitable for carbide coated cutters, tool steels, HSS and non-metal materials (glass, ceramic, etc.). We recommend moistening diamond-coated sharpening devices with water and grinding with little pressure.</p> <p>* Monocrystalline diamonds are significantly more wear resistant than the polycrystalline diamonds used to make lower quality diamond sharpening tools.</p> <p> </p> <p>Dimensions 202 x 70 x 11 mm</p> <p></p> <p></p>

032.153

5/ 5

<p>Medium-grit lime sandstone from the Kumamoto region for general sharpening. Readily absorbs water, cuts well and easily produces a fine slurry.</p> <p>Japanese Natural Stones</p> <p>""A blade and sharpening stone must be as perfect a match as bride and groom"" according to legendary blacksmith, Shigeoshi Iwasaki. Finding the ideal pairing is no easy task in either case. Despite the excellent performance of synthetic stones, many experienced sharpeners still prefer natural stones for sharpening their finest blades. Japanese sharpening stones are particularly renowned for their effect to harmoniously sharpen hand-forged carbon steels. They can bring a blade’s full potential to the fore and allow the sharpening process itself to become a pleasant ritual. The finest stones from the Honyama quarries are becoming increasingly difficult to acquire - we take great pleasure in still being able to offer these rare treasures. Natural Japanese stones may only be used with water and must be kept protected from frost. Please note that the stones may have slight natural imperfections and may vary somewhat in size.</p> <p> </p> <p>Grit 800-1200</p> <p>Dimensions 220 x 60 x 62 mm</p> <p></p>

032.197

5/ 5

<p>Weicon AT-44 is an all-round spray without silicone, which maintains and protects all tools and machines. The 3-way spray valve allows to work in any position (even overhead). Thanks to its special formula and very low friction coefficient, it combines corrosion protection, cleaning, water displacement, lubrication and conservation in a single product.</p> <p>Loosens seized screw connections, bolts, fittings and valves</p> <p>Eliminates squeaky and creaky noises on hinges, guides and bearings</p> <p>Dispels moisture from electrical cables, prevents tracking currents</p> <p>Lubricates, maintains and cleans metal surfaces and mechanical parts</p> <p></p>

032.313

5/ 5

<p class="MsoNormal"><span lang="en-us" xml:lang="en-us">Aluminium oxide abrasive.</span></p> <p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">Matsunaga is one of the largest manufacturers of sharpening stones in Japan. These stones are usually known as King stones or Sun Tiger stones. The stones of the King or Sun Tiger series have a relatively soft bond, which allows the abrasives to be constantly exposed during use, making the stone highly effective. These stones are especially suitable for extremely hard, low-alloy carbon steels (White and Blue Paper Steel). Before use, soak the stones in water for at least 15 minutes. They can also be stored in water permanently.</span></p> <p></p>

032.003