Tormek Adjustable Trueing Tool TT-50

5/ 5

<p>Simple ceramic sharpening rod made of Kyocera special ceramic for grinding or honing. It is ideal for quick and uncomplicated resharpening of carving and hook knives, as well as European knives. It has a coarse side for grinding and fine side for honing. The hone becomes clogged over time and therefore needs to be cleaned every now and then with a rough kitchen sponge and some washing-up liquid. Can be used dry or wet.</p> <p>Length 255 mm</p> <p></p>

032.248

5/ 5

<p>Fine-grit waterstones for removing burr, polishing and honing. Comes with Nagura stone.</p> <p>Cerax by Suehiro</p> <p>Cerax is the best-known brand of the Suehiro company. The stones sold under this name have a medium-hard bond and are particularly suitable for high-alloy tool steels but also for low-alloy carbon steels. The coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly. The stone with the base has extra stability and is easy to store. A Nagura stone is used for cleaning and unclogging the surface of the stone and for creating a fine polishing paste. Before use, soak the stones in water for at least 10 minutes, but do not store them in water permanently. White aluminium oxideabrasive.</p> <p>Dimensions 206 x 73 x 23 mm</p> <p>Base without base</p> <p></p>

032.367

5/ 5

<p>With plastic rollers and a folding angle gauge, incl. sharpening stone and oil.</p> <p>Max. blade width 65 mm</p> <p>Max. blade thickness 9 mm</p> <p>Grit 120 / 240</p> <p></p>

032.259

5/ 5

<p>Fits models 2000 - 2006 and T7. </p> <p></p>

032.412

5/ 5

<p>Hard ceramic blocks for trueing Japanese waterstones quickly and accurately. The stones are worked wet on the block until plane.</p> <p>Grit 100</p> <p>Dimensions 240 x 100 x 40 mm</p> <p></p>

032.233

5/ 5

<p>For setting the grinding angle and checking the bevel geometry.</p> <p>Grinding jigs and accessories are suitable for all models (T-3, T-4, T-7 and T-8) unless otherwise noted.</p> <p></p>

032.025

5/ 5

<p>Maximum precision and solid zinc cast housing</p> <p>TORMEK T-8 Original takes precision and stability to a completely new level. The new design integrates the previously mounted sleeves for the vertical and horizontal support into the revolutionary fully cast top and frame. The enhanced stability optimizes jig guidance and thus the sharpening accuracy.</p> <p>The Tormek DC-250 Diamond Grinding Wheel with grit 360 achieves efficient removal and quickly repairs a blunt or damaged cutting edge. It is the ideal grinder for the turner and is particularly durable. The high quality of the diamond grinding surface ensures efficient, constant sharpening with a constant wheel diameter. With this set you also receive all relevant sharpening guides.</p> <p>Diamond grinding wheel ""Tormek DC-250"", grit 360, Ø 250 x 50 mm; leather honing wheel Ø 215 x 30 mm; universal support with fine adjustment (can be used horizontally or vertically). 230 V, 200 W, 90 rpm, torque 14.7 Nm, 14.8 kg.</p> <p>Includes:</p> <p>Square edge jig (SE-77)</p> <p>Adjustable trueing tool (TT-50) and stone grader (SP-650) for additional standard sharpening wheels (water stones)</p> <p>Anti-corrosion concentrate, 150 ml (ACC-150)</p> <p>Pro Angle Master (WM-200)</p> <p>Honing compound (PA-70)</p> <p>Handbook (HB-10)</p> <p>Instruction video (DVD-1)</p> <p>Woodturner's kit (TNT-808)</p> <p>Edge marker (EM-15)</p> <p>Comes with Tormek manual in German language.</p> <p>Tormek Sharpening System</p> <p>Proven for many years and constantly perfected wet working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.</p> <p>The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The offset front end can also be used for flat honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.</p> <p>A summary of the advantages of Tormek sharpening machines</p> <p>Longer working life of T-8 and T-4 Original:</p> <p>Stainless steel spindle with EzyLock-System for easier stone assembling</p> <p>Solid zinc cast housing with integrated vertical and horizontal support</p> <p>Better motor insulation</p> <p></p> <p>Additional advantages of T-8 Original:</p> <p>Electrophoretic dip painted casing, zinc cast housing frame and robust ABS plastic sides for better corrosion protection</p> <p>Silent running, maintenance free motor, designed for continuous operation, 25 000 hour life</p> <p>Improved water container with screw lift for easy positioning, overspill rim, drip-off plate, magnetic swarf collector and magnetic cleaning scraper</p> <p></p>

032.326

5/ 5

032.354

5/ 5

<p class="MsoNormal">NEW! Ultimate precision, solid zinc-cast top</p> <p class="MsoNormal">The TORMEK T-4 Original, an advanced version of the T-3 model, takes precision and stability to a new level. Both the vertical and horizontal bases for the universal support and the integrated carrying handle are made in the same zinc casting and therefore permanently joined together. The motor and main shaft are fixed to the cast top, resulting in a solid construction which significantly improves accuracy during sharpening.</p> <p class="MsoNormal">""Tormek Original"" sharpening wheel, grit 220, Ø 200 x 40 mm; leather honing wheel Ø 145 x 26 mm; solid zinc casting top with universal support with fine adjustment (horizontal and vertical settings). Impact-resistant ABS plastic housing. 230 V, 120 W, 120 rpm, 8 kg.</p> <p class="MsoNormal">Includes:</p> <p class="MsoNormal">Stone grader (SP-650)</p> <p class="MsoNormal">Pro Angle Master (WM-200)</p> <p class="MsoNormal">Honing compound (PA-70)</p> <p class="MsoNormal">Handbook (HB-10)</p> <p class="MsoNormal">Instruction video (DVD-1)</p> <p class="MsoNormal">Edge marker (EM-15)</p> <p class="MsoNormal">Voucher for free participation in a one-day workshop of your choice or a discount of €100 for a multi-day workshop</p> <p class="MsoNormal">Comes with Tormek manual in German language.</p> <p class="MsoNormal">Tormek Sharpening System</p> <p class="MsoNormal">Proven for many years and constantly perfected wet working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.</p> <p class="MsoNormal">The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The offset front end can also be used for flat honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.</p> <p class="MsoNormal">A summary of the advantages of Tormek sharpening machines</p> <p class="MsoNormal">Longer working life of T-8 and T-4 Original:</p> <p class="MsoNormal">Stainless steel spindle with EzyLock-System for easier stone assembling</p> <p class="MsoNormal">Solid zinc cast housing with integrated vertical and horizontal support</p> <p class="MsoNormal">Better motor insulation</p> <p class="MsoNormal"></p> <p class="MsoNormal">Additional advantages of T-8 Original:</p> <p class="MsoNormal">Electrophoretic dip painted casing, zinc cast housing frame and robust ABS plastic sides for better corrosion protection</p> <p class="MsoNormal">Silent running, maintenance free motor, designed for continuous operation, 25 000 hour life</p> <p class="MsoNormal">Improved water container with screw lift for easy positioning, overspill rim, drip-off plate, magnetic swarf collector and magnetic cleaning scraper</p> <p></p> <p></p>

032.007

5/ 5

<p>Belgian Coticule Whetstones</p> <p>The quarrying of Belgian whetstones in the Ardennes is first mentioned in a Roman document. But the story of these natural honing stones goes further back than that. The approx. 480 million-year-old grey yellow sedimentary stones, originating from volcanic ash, are composed of very fine garnet crystals. During honing, these are released from the matrix and, in combination with water and abrasion debris, make a honing paste. The garnets only remove fine shavings from the metal and ensure a good polish. Unique combination of quick abrasive action and grain size.</p> <p>Interesting fact: To produce 1 kg of sharpening stones approx. 1500 kg of cliff must be removed. The thin yellow slices are glued to a slate base and cut to size.</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p></p> <p>Grit 6000-8000</p> <p>Dimensions 150 x 40 x 20 mm</p> <p></p>

032.405

5/ 5

<p>For plane blades and paring chisels. Also suitable for Japanese chisels. Slightly convex cutting shapes can also be sharpened using two setting wheels (included with T-8).</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p></p>

032.009

5/ 5

<p>Conical diamond sharpener for sculpting and turning tools.</p> <p>DMT Diamond Stones</p> <p>The American manufacturer Diamond Machining Technology (DMT) is the founder of interrupted surface technology for diamond sharpening stones, and has been the market leader for diamond-coated sharpening equipment for years. The high-quality sharpening tools are manufactured at the company's headquarters in Massachusetts (USA).</p> <p>Monocrystalline* diamond particles guarantee a long service life and excellent material removal</p> <p>Uniform grit sizes and a dense diamond distribution for even grinding patterns</p> <p>Round recesses prevent clogging due to grinding debris</p> <p>Permanently flat and warp-free thanks to supporting plates made of steel or warp-free plastic with a nickel matrix</p> <p>Colour coding of various grit sizes</p> <p>100 % made in the USA</p> <p>Monocrystalline* diamond-coated sharpening devices:</p> <p>Diamond-coated sharpening devices remain permanently flat, and are especially suitable for tools with straight blades, as well as for producing flat surfaces (e.g. backs of plane and chisel blades, plane soles, scrapers). Also suitable for carbide coated cutters, tool steels, HSS and non-metal materials (glass, ceramic, etc.). We recommend moistening diamond-coated sharpening devices with water and grinding with little pressure.</p> <p>* Monocrystalline diamonds are significantly more wear resistant than the polycrystalline diamonds used to make lower quality diamond sharpening tools.</p> <p></p> <p>Overall length 152 mm</p> <p>Ø 9.5-19.3 mm</p> <p></p>

032.215

5/ 5

<p>The blade is automatically centred within two grooved holding jaws that feature two blade-clamping positions. The three-point holding jaws also make it possible to clamp irregular shapes, such as a rabbet plane blade. Minimum blade width 3 mm.</p> <p>Max. blade width 63.5 mm</p> <p></p>

032.285

5/ 5

<p>TORMEK T-8 Original takes precision and stability to a completely new level. The new design integrates the previously mounted sleeves for the vertical and horizontal support into the revolutionary fully cast top and frame. The enhanced stability optimizes jig guidance and thus the sharpening accuracy.</p> <p>""Tormek Original"" sharpening wheel (SG-250), aluminium oxide, Ø 250 x 50 mm, grit 220; leather honing wheel, Ø 215 x 30 mm; universal support, finely adjustable (can be used horizontally or vertically). 230 V, 200 W, 90 rpm, torque 14.7 Nm, 14.8 kg.</p> <p>Includes:</p> <p>Square Edge Jig (SE-77)</p> <p>Adjustable Trueing Tool (TT-50)</p> <p>Stone Grader (SP-650)</p> <p>Pro Angle Master (WM-200)</p> <p>Honing Compound (PA-70)</p> <p>Handbook (HB-10)</p> <p>Instruction Video (DVD-1)</p> <p>Edge Marker (EM-15)</p> <p>Voucher for free participation in a one-day workshop of your choice or a discount of €100 for a multi-day workshop.</p> <p>Comes with Tormek manual in German language.</p> <p>Tormek Sharpening System</p> <p>Proven for many years and constantly perfected wet working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.</p> <p>The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The offset front end can also be used for flat honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.</p> <p>A summary of the advantages of Tormek sharpening machines</p> <p>Longer working life of T-8 and T-4 Original:</p> <p>Stainless steel spindle with EzyLock-System for easier stone assembling</p> <p>Solid zinc cast housing with integrated vertical and horizontal support</p> <p>Better motor insulation</p> <p></p> <p>Additional advantages of T-8 Original:</p> <p>Electrophoretic dip painted casing, zinc cast housing frame and robust ABS plastic sides for better corrosion protection</p> <p>Silent running, maintenance free motor, designed for continuous operation, 25 000 hour life</p> <p>Improved water container with screw lift for easy positioning, overspill rim, drip-off plate, magnetic swarf collector and magnetic cleaning scraper</p> <p></p>

032.010

5/ 5

<p>This waterproof yet non-slip rubber mat is ideal as a workpad for sharpening machines as well as for sharpening by hand using waterstones. The raised rim and all-round groove will retain any water spillage. The relatively soft material also protects freshly sharpened tools placed on the mat. 533 x 343 mm.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p></p>

032.239

5/ 5

<p>Thicker and longer lasting than the cream-coloured stones, but with equally good honing properties.</p> <p>Belgian Coticule Whetstones</p> <p>The quarrying of Belgian whetstones in the Ardennes is first mentioned in a Roman document. But the story of these natural honing stones goes further back than that. The approx. 480 million-year-old grey yellow sedimentary stones, originating from volcanic ash, are composed of very fine garnet crystals. During honing, these are released from the matrix and, in combination with water and abrasion debris, make a honing paste. The garnets only remove fine shavings from the metal and ensure a good polish. Unique combination of quick abrasive action and grain size.</p> <p>Interesting fact: To produce 1 kg of sharpening stones approx. 1500 kg of cliff must be removed. The thin yellow slices are glued to a slate base and cut to size.</p> <p>Qualität von Natursteinen</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p></p> <p>Grit 6000-8000</p> <p>Dimensions 250 x 60 x 13 mm</p> <p></p>

032.099