Trueing Block, 240 x 100 x 40 mm

5/ 5

<p>These wax-like polishing pastes are applied to felt buffing wheels and smooth leather sides of strops. Only for steel/stainless steel.</p> <p></p>

032.299

5/ 5

<p>Ballistol provides reliable rust protection, cleans and oils metals, impregnates and preserves leather and wood surfaces, and is even suitable for the disinfection of minor cuts. In the garden it can be used to treat tree cancer and to combat aphids (in a 3 % solution with water). Ballistol is based on pure medical white oil, spiked with natural plant products. It is thus ecologically-friendly and bio-degradable.</p> <p>Content 50 ml</p> <p>Container Glass bottle</p> <p></p>

032.316

5/ 5

<p>Fits models 2000 - 2006 and T7. </p> <p></p>

032.412

5/ 5

<p class="MsoNormal">NEW! Ultimate precision, solid zinc-cast top</p> <p class="MsoNormal">The TORMEK T-4 Original, an advanced version of the T-3 model, takes precision and stability to a new level. Both the vertical and horizontal bases for the universal support and the integrated carrying handle are made in the same zinc casting and therefore permanently joined together. The motor and main shaft are fixed to the cast top, resulting in a solid construction which significantly improves accuracy during sharpening.</p> <p class="MsoNormal">""Tormek Original"" sharpening wheel, grit 220, Ø 200 x 40 mm; leather honing wheel Ø 145 x 26 mm; solid zinc casting top with universal support with fine adjustment (horizontal and vertical settings). Impact-resistant ABS plastic housing. 230 V, 120 W, 120 rpm, 8 kg.</p> <p class="MsoNormal">Includes:</p> <p class="MsoNormal">Stone grader (SP-650)</p> <p class="MsoNormal">Pro Angle Master (WM-200)</p> <p class="MsoNormal">Honing compound (PA-70)</p> <p class="MsoNormal">Handbook (HB-10)</p> <p class="MsoNormal">Instruction video (DVD-1)</p> <p class="MsoNormal">Edge marker (EM-15)</p> <p class="MsoNormal">Voucher for free participation in a one-day workshop of your choice or a discount of €100 for a multi-day workshop</p> <p class="MsoNormal">Comes with Tormek manual in German language.</p> <p class="MsoNormal">Tormek Sharpening System</p> <p class="MsoNormal">Proven for many years and constantly perfected wet working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.</p> <p class="MsoNormal">The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The offset front end can also be used for flat honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.</p> <p class="MsoNormal">A summary of the advantages of Tormek sharpening machines</p> <p class="MsoNormal">Longer working life of T-8 and T-4 Original:</p> <p class="MsoNormal">Stainless steel spindle with EzyLock-System for easier stone assembling</p> <p class="MsoNormal">Solid zinc cast housing with integrated vertical and horizontal support</p> <p class="MsoNormal">Better motor insulation</p> <p class="MsoNormal"></p> <p class="MsoNormal">Additional advantages of T-8 Original:</p> <p class="MsoNormal">Electrophoretic dip painted casing, zinc cast housing frame and robust ABS plastic sides for better corrosion protection</p> <p class="MsoNormal">Silent running, maintenance free motor, designed for continuous operation, 25 000 hour life</p> <p class="MsoNormal">Improved water container with screw lift for easy positioning, overspill rim, drip-off plate, magnetic swarf collector and magnetic cleaning scraper</p> <p></p> <p></p>

032.007

5/ 5

<p>For hollow gouges and turning tools, as well as interchangeable cutters for hollowing tools etc., up to 36 mm wide. Adjustable in cutting angle and shape. With the SVD-186 R Gouge Jig, you will get an exact replication of both the shape and edge angle on your bowl gouges and spindle gouges, so you can be sure that the tool will behave in the same predictable way on the lathe after every sharpening. Used correctly and together with your Tormek tool sharpener, there is no alternative method that can give you faster or sharper results.</p> <p>The jig can be set for various lengths of the side bevel. Mount your cutter onto the special shaft that is included with the jig, and you get a controlled sharpening.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p></p>

032.008

5/ 5

<p>Simple ceramic sharpening rod made of Kyocera special ceramic for grinding or honing. It is ideal for quick and uncomplicated resharpening of carving and hook knives, as well as European knives. It has a coarse side for grinding and fine side for honing. The hone becomes clogged over time and therefore needs to be cleaned every now and then with a rough kitchen sponge and some washing-up liquid. Can be used dry or wet.</p> <p>Length 255 mm</p> <p></p>

032.248

5/ 5

<p>With this set, you can create the traditional surface protection at home, accurately burnishing knife backs or other metal components. You can also touch up existing finishing, e.g. on rifle shafts, without any problems.</p> <p>Burnishing creates a protective layer (patina) on a ferrous surface to protect against rust.</p> <p>Content:</p> <p>Ballistol Universal Oil, spray 50 ml</p> <p>Ballistol Robla Cold Degreaser, spray 50 ml</p> <p>Ballistol Klever Quick Burnishing, bottle 50 ml</p> <p>2 pairs of nitril disposable gloves</p> <p>2 goat hair brushes</p> <p>2 lint-free care cloths</p> <p>Burnishing is used for corrosion protection. In contrast to other processes, no additional layer is applied to the metal during burnishing, but a mixed oxide layer of FeO and Fe2O3 is created on the surface to protect against corrosion. During the burnishing process, the colour of the surface changes to black or dark blue.</p> <p>To achieve an even result, the metal must first be treated with a degreaser and possibly also with fine steel wool (grit 00). Then you can start the actual burnishing at a temperature of 20-30 °C. Oil the burnished workpiece overnight to stabilise the burnishing.</p> <p></p> <p>Hazard statement</p> <p>Extremely flammable aerosol. Pressurised container: May burst if heated. Causes skin irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects. May be corrosive to metals. Harmful if swallowed. Causes serious eye irritation.</p> <p></p>

032.261

5/ 5

<p>With two different grits. Ideal grit mix for razors.</p> <p>Super Stone by Naniwa</p> <p>This sharpening stone series is ideal for the final polishing of knife blades. The stones provide a highly polished effect and stay flat for a long time. When sharpening, however, they provide a pleasant feeling as though working on soft natural stones.</p> <p>They are ideal for sharpening extremely hard</p> <p>low-alloy carbon steels(White and Blue Paper Steel).</p> <p>Before use, soak the stone for at least 10 minutes. Do not keep it in water permanently.</p> <p>Naniwa has changed the name and the packaging of this sharpening stone series (formerly Super Stone Series). The sharpening stone itself has not been changed.</p> <p>Grit 3000/10 000</p> <p>Dimensions 210 x 70 x 20 mm</p> <p></p>

032.186

5/ 5

<p>For shaping and sharpening. 250 grit side green silicon carbide, 1000 grit side aluminium oxide.</p> <p>King/Sun Tiger</p> <p>Matsunaga is one of the largest manufacturers of sharpening stones in Japan. In the West, these stones are usually known as King stones or Sun Tiger stones. The stones of the King or Sun Tiger series have a relatively soft bond, which allows the abrasives to be continually exposed during use, making the stone highly effective. These stones are particularly suitable for extremely hard, low-alloy carbon steels (White and Blue Paper Steel). Before use, soak the stones in water for at least 15 minutes. They can also be stored in water permanently. Green silicon carbide abrasive is used for 180 grit. For all other grits aluminium oxideis used.</p> <p>Grit 250/1000</p> <p>Dimensions 150 x 50 x 25 mm</p> <p></p>

032.198

5/ 5

<p>This sharpening system allows the sharpening of bevels of 25° and 30° on one side and 27° and 32° on the opposite side, thus allowing the grinding of a micro bevel. Suitable for plane blades and chisels, without requiring time-consuming adjustments. The dry grinding system means it can be used irrespective of environmental conditions. Hence, it is ideal for use on construction sites and anywhere where quick results are needed without requiring maximum sharpness.</p> <p>Insertion of the magnetically attached diamond stone with corresponding grit</p> <p>Insertion of slide with alignment for 25° and 30° bevel angles or 27°and 32° bevel angles</p> <p>Insertion of plane blade/chisel and fixing in place at stop against counter-pressure</p> <p>Grinding of bevel angle by moving the slide</p> <p>Where necessary, removal of the burr on the back of the blade</p> <p></p> <p>Tool support and slide are made of solid milled and anodised aluminium with dovetail guide and wear-resistant nylon slide rail.</p> <p>M. Power Tools DC Diamond Stones</p> <p>Diamond Cross (DC) sharpening stones offer an excellent price/performance ratio with a high manufacturing quality. The lapping of the supporting plates and the stringent quality controls are performed at the company's headquarters in England.</p> <p>Monocrystalline* diamond particles guarantee a long service life and excellent material removal</p> <p>Uniform grit sizes and a dense diamond distribution for even grinding patterns</p> <p>Cross-shaped recesses prevent clogging due to grinding debris</p> <p>Permanently flat and warp-free thanks to specially lapped supporting plates made of steel with a stainless steel matrix</p> <p>Monocrystalline* diamond-coated sharpening devices:</p> <p>Diamond-coated sharpening devices remain permanently flat, and are especially suitable for tools with straight blades, as well as for producing flat surfaces (e.g. backs of plane and chisel blades, plane soles, scrapers). Also suitable for carbide coated cutters, tool steels, HSS and non-metal materials (glass, ceramic, etc.). We recommend moistening diamond-coated sharpening devices with water and grinding with little pressure.</p> <p>* Monocrystalline diamonds are significantly more wear resistant than the polycrystalline diamonds used to make lesser quality diamond sharpening tools.</p> <p>Scope of delivery</p> <p></p> <p>Fasttrack MK2 sharpening system, 1 x diamond stone medium-coarse, 1 x diamond stone medium-fine, cleaning block, removable fence, non-slip mat.</p> <p> </p> <p>Max. blade width 64 mm</p> <p></p>

032.352

5/ 5

<p>Shaping stone with good sharpening qualities. Silicon carbide abrasive.</p> <p>Traditional Stone by Naniwa</p> <p>This stone series is suitable for sharpening blunt knives and tool blades. The stone has a relatively hard bond, it therefore stays flat for a longer time. It is ideal for high-alloy tool steels, but also for low-alloy carbon steels. The tool steels made of alloy components with a coarse grain structure (e.g. chromium and vanadium) require a stone that does not wear quickly. Before use, soak the stone for at least 10 minutes. Do not keep it in water permanently.</p> <p>Naniwa has changed the name and the packaging of this sharpening stone series (formerly known as DX Stone). The sharpening stone itself has not been changed.</p> <p>Grit 220</p> <p>Dimensions 210 x 70 x 20 mm</p> <p></p>

032.181

5/ 5

<p>For blades of any length, minimum blade width 13 mm.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p></p>

032.015

5/ 5

<p>For leather honing wheels</p> <p>70 g.</p> <p></p>

032.020

5/ 5

<p>Granite stone plate for use in combination with sandpaper for sharpening tool blades or trueing waterstones and oilstones. Anti-slip feet for added stability. Flatness tolerance ± 0.1 mm. Colour may vary.</p> <p>Dimensions 280 x 130 x 20 mm</p> <p></p>

032.226

5/ 5

<p>With two different grits. Comes with Nagura stone. For sharpening.</p> <p>Cerax by Suehiro</p> <p>Cerax is the best-known brand of the Suehiro company. The stones sold under this name have a medium-hard bond and are particularly suitable for high-alloy tool steels but also for low-alloy carbon steels. The coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly. The stone with the base has extra stability and is easy to store. A Nagura stone is used for cleaning and unclogging the surface of the stone and for creating a fine polishing paste. Before use, soak the stones in water for at least 10 minutes, but do not store them in water permanently. White aluminium oxideabrasive.</p> <p>Grit 1000/3000</p> <p>Dimensions 183 x 63 x 32 mm</p> <p>Base with base</p> <p></p>

032.157

5/ 5

<p>Fine-grit waterstones for removing burr, polishing and honing. Comes with Nagura stone.</p> <p>Cerax by Suehiro</p> <p>Cerax is the best-known brand of the Suehiro company. The stones sold under this name have a medium-hard bond and are particularly suitable for high-alloy tool steels but also for low-alloy carbon steels. The coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly. The stone with the base has extra stability and is easy to store. A Nagura stone is used for cleaning and unclogging the surface of the stone and for creating a fine polishing paste. Before use, soak the stones in water for at least 10 minutes, but do not store them in water permanently. White aluminium oxideabrasive.</p> <p>Dimensions 206 x 73 x 23 mm</p> <p>Base without base</p> <p></p>

032.367