M. Power Tools DC Fasttrack MK2 Sharpening System M Power Tools Sharpening

M. Power Tools DC Fasttrack MK2 Sharpening System

,
5/ 5
<p>This sharpening system allows the sharpening of bevels of 25° and 30° on one side and 27° and 32° on the opposite side, thus allowing the grinding of a micro bevel. Suitable for plane blades and chisels, without requiring time-consuming adjustments. The dry grinding system means it can be used irrespective of environmental conditions. Hence, it is ideal for use on construction sites and anywhere where quick results are needed without requiring maximum sharpness.</p> <p>Insertion of the magnetically attached diamond stone with corresponding grit</p> <p>Insertion of slide with alignment for 25° and 30° bevel angles or 27°and 32° bevel angles</p> <p>Insertion of plane blade/chisel and fixing in place at stop against counter-pressure</p> <p>Grinding of bevel angle by moving the slide</p> <p>Where necessary, removal of the burr on the back of the blade</p> <p></p> <p>Tool support and slide are made of solid milled and anodised aluminium with dovetail guide and wear-resistant nylon slide rail.</p> <p>M. Power Tools DC Diamond Stones</p> <p>Diamond Cross (DC) sharpening stones offer an excellent price/performance ratio with a high manufacturing quality. The lapping of the supporting plates and the stringent quality controls are performed at the company's headquarters in England.</p> <p>Monocrystalline* diamond particles guarantee a long service life and excellent material removal</p> <p>Uniform grit sizes and a dense diamond distribution for even grinding patterns</p> <p>Cross-shaped recesses prevent clogging due to grinding debris</p> <p>Permanently flat and warp-free thanks to specially lapped supporting plates made of steel with a stainless steel matrix</p> <p>Monocrystalline* diamond-coated sharpening devices:</p> <p>Diamond-coated sharpening devices remain permanently flat, and are especially suitable for tools with straight blades, as well as for producing flat surfaces (e.g. backs of plane and chisel blades, plane soles, scrapers). Also suitable for carbide coated cutters, tool steels, HSS and non-metal materials (glass, ceramic, etc.). We recommend moistening diamond-coated sharpening devices with water and grinding with little pressure.</p> <p>* Monocrystalline diamonds are significantly more wear resistant than the polycrystalline diamonds used to make lesser quality diamond sharpening tools.</p> <p>Scope of delivery</p> <p></p> <p>Fasttrack MK2 sharpening system, 1 x diamond stone medium-coarse, 1 x diamond stone medium-fine, cleaning block, removable fence, non-slip mat.</p> <p> </p> <p>Max. blade width 64 mm</p> <p></p>
032.352
M. Power Tools DC Fasttrack MK2 Sharpening System M Power Tools Sharpening
€116.31

By buying this product you can collect up to 232 point points. Your cart will total 232 points that can be converted into a voucher of €2.32.

Shipping in 7-10 days
Quantity

This sharpening system allows the sharpening of bevels of 25° and 30° on one side and 27° and 32° on the opposite side, thus allowing the grinding of a micro bevel. Suitable for plane blades and chisels, without requiring time-consuming adjustments. The dry grinding system means it can be used irrespective of environmental conditions. Hence, it is ideal for use on construction sites and anywhere where quick results are needed without requiring maximum sharpness.

Insertion of the magnetically attached diamond stone with corresponding grit

Insertion of slide with alignment for 25° and 30° bevel angles or 27°and 32° bevel angles

Insertion of plane blade/chisel and fixing in place at stop against counter-pressure

Grinding of bevel angle by moving the slide

Where necessary, removal of the burr on the back of the blade

Tool support and slide are made of solid milled and anodised aluminium with dovetail guide and wear-resistant nylon slide rail.

M. Power Tools DC Diamond Stones

Diamond Cross (DC) sharpening stones offer an excellent price/performance ratio with a high manufacturing quality. The lapping of the supporting plates and the stringent quality controls are performed at the company's headquarters in England.

Monocrystalline* diamond particles guarantee a long service life and excellent material removal

Uniform grit sizes and a dense diamond distribution for even grinding patterns

Cross-shaped recesses prevent clogging due to grinding debris

Permanently flat and warp-free thanks to specially lapped supporting plates made of steel with a stainless steel matrix

Monocrystalline* diamond-coated sharpening devices:

Diamond-coated sharpening devices remain permanently flat, and are especially suitable for tools with straight blades, as well as for producing flat surfaces (e.g. backs of plane and chisel blades, plane soles, scrapers). Also suitable for carbide coated cutters, tool steels, HSS and non-metal materials (glass, ceramic, etc.). We recommend moistening diamond-coated sharpening devices with water and grinding with little pressure.

* Monocrystalline diamonds are significantly more wear resistant than the polycrystalline diamonds used to make lesser quality diamond sharpening tools.

Scope of delivery

Fasttrack MK2 sharpening system, 1 x diamond stone medium-coarse, 1 x diamond stone medium-fine, cleaning block, removable fence, non-slip mat.

 

Max. blade width 64 mm

032.352

16 other products in the same category: