Kyocera Ceramic Sharpening Rod, 1000 Grit

5/ 5

<p>The lapping fluid can be used instead of water when working with diamond-coated sharpening systems. The positive properties of the lapping fluid considerably improve the grinding result, reliably prevent rust and corrosion and also have an excellent cleaning effect. </p> <p></p> <p>Hazard statement</p> <p>Causes skin irritation. May cause damage to organs.</p> <p></p>

032.202

5/ 5

<p>Thanks to the wide flat rest with adjustable angle, this system is suitable for scrapers and parting tools as well as chisels and plane blades. Includes a left and right base with eccentric locking mechanism, arm rest and flat rest. Flat rest 126 x 76 mm.</p> <p>The Oneway sharpening system was specially designed for woodturning tools but, with its two different jigs, is also suitable for chisels and plane blades as well as other tools. The arm is fitted to a double-wheeled grinder using a base system (fits all common models).</p> <p></p>

032.336

5/ 5

<p>Polishing emulsion with diamond particles for polishing or stropping knives and razors, as well as chisels or plane blades. Fits Jende Nanocloth acrylic strop block or leather honing strop block. To apply the emulsion, we recommend removing the pump cover, tipping the emulsion onto the strop block and spreading it evenly with a finger.</p> <p>Grit 0,5 Micron</p> <p></p>

032.280

5/ 5

<p>Solid sharpening stone holder, of hard rubber with tempered glass core for secure positioning. Fits Shapton sharpening stones.</p> <p>Dimensions 258 x 85 x 55 mm</p> <p></p>

032.196

5/ 5

<p>The Sharp Skate 4 Blade Edition allows you to sharpen in every direction so is easier and more effective to use than conventional sharpening guides. In addition, grinding of skewed chisels can be carried out up to an angle of 45°. A specially designed guide rail ensures a perfect running profile and precision while sharpening. With the different sharpening directions, every part of the sharpening stone can be fully utilised. Includes English and German instructions for use.</p> <p>Max. blade width 67 mm</p> <p>Max. blade thickness 10 mm</p> <p></p>

032.262

5/ 5

<p>White aluminium oxideabrasive.</p> <p>Thanks to its concave and convex form, this stone is ideal for sharpening and honing garden shears.</p> <p>Goken Stone by Naniwa</p> <p>This stone has a relatively hard bond. It is particularly suitable for high-alloy steels but also for low-alloy carbon steels. The coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly. The stones should be soaked in water for at least 10 minutes before use, but must not be stored in water permanently.</p> <p>Dimensions 133 x 28 x 20 mm</p> <p></p>

032.376

5/ 5

<p>The gentle, highly pure aluminium oxideused for manufacturing this stone is much finer than the abrasives of other synthetic oilstones. Additionally, the stone is highly effective and does not clog too quickly. Pre-soaked with oil in the factory, it comes ready for use.</p> <p>Dimensions 203 x 51 x 25 mm</p> <p></p>

032.110

5/ 5

<p>For shaping and sharpening. 250 grit side green silicon carbide, 1000 grit side aluminium oxide.</p> <p>King/Sun Tiger</p> <p>Matsunaga is one of the largest manufacturers of sharpening stones in Japan. In the West, these stones are usually known as King stones or Sun Tiger stones. The stones of the King or Sun Tiger series have a relatively soft bond, which allows the abrasives to be continually exposed during use, making the stone highly effective. These stones are particularly suitable for extremely hard, low-alloy carbon steels (White and Blue Paper Steel). Before use, soak the stones in water for at least 15 minutes. They can also be stored in water permanently. Green silicon carbide abrasive is used for 180 grit. For all other grits aluminium oxideis used.</p> <p>Grit 250/1000</p> <p>Dimensions 150 x 50 x 25 mm</p> <p></p>

032.198

5/ 5

<p>For leather honing wheels</p> <p>70 g.</p> <p></p>

032.020

5/ 5

<p>Suitable for Tormek T-3, T-4 and old series models.</p> <p></p>

032.350

5/ 5

<p>As a supplement, this jig, which can be rotated in any direction, is designed for sharpening turning and profile gouges. The angle can be accurately adjusted using the hole matrix. Notches on the back indicate the set angle. Max. intake Ø 19 mm.</p> <p>The Oneway sharpening system was specially designed for woodturning tools but, with its two different jigs, is also suitable for chisels and plane blades as well as other tools. The arm is fitted to a double-wheeled grinder using a base system (fits all common models).</p> <p></p>

032.337

5/ 5

<p>For sharpening knife blades from 100 mm blade length. Wide clamping jaws allow the blade to be held securely and an adjustment screw allows the stop to be set.</p> <p></p>

032.330

5/ 5

<p>With its traditional design, where the user can adjust the cutting edge by turning the knurled screw in the back, this sharpening system is one of the most precise and easy-to-use on the market. Simply angle the edge of the plane blade or chisel blade with the sliding ""T-piece"", pull the blade out to your sharpening stone and tighten the clamping knob, now you can finely adjust the cutting angle with the rear micro-adjustment knob. With a few simple steps, you can get accurate and repeatable results. Using the setting gauge always gives you the same angle when grinding. The setting gauge is marked with the angles 20°, 25°, 30° and 35°. If you want a micro bevel on the edge, simply turn the knob further, one turn of the knob will move the angle just under one degree further.</p> <p>Max. blade width 63 mm</p> <p>Max. blade thickness 12.5 mm</p> <p></p>

032.269

5/ 5

<p>The blade is automatically centred within two grooved holding jaws that feature two blade-clamping positions. The three-point holding jaws also make it possible to clamp irregular shapes, such as a rabbet plane blade. Minimum blade width 3 mm.</p> <p>Max. blade width 63.5 mm</p> <p></p>

032.285

5/ 5

<p>With this gel-like rust remover you can remove rust easily and quickly. Apply the undiluted gel on the surface with a kitchen sponge and simply rub off the rust. Can also be used for large surfaces. This gel does not stain wood and most synthetic substances. Bio-degradable.</p> <p>Content 250 ml</p> <p></p>

032.298

5/ 5

<p class="MsoNormal">NEW! Ultimate precision, solid zinc-cast top</p> <p class="MsoNormal">The TORMEK T-4 Original, an advanced version of the T-3 model, takes precision and stability to a new level. Both the vertical and horizontal bases for the universal support and the integrated carrying handle are made in the same zinc casting and therefore permanently joined together. The motor and main shaft are fixed to the cast top, resulting in a solid construction which significantly improves accuracy during sharpening.</p> <p class="MsoNormal">""Tormek Original"" sharpening wheel, grit 220, Ø 200 x 40 mm; leather honing wheel Ø 145 x 26 mm; solid zinc casting top with universal support with fine adjustment (horizontal and vertical settings). Impact-resistant ABS plastic housing. 230 V, 120 W, 120 rpm, 8 kg.</p> <p class="MsoNormal">Includes:</p> <p class="MsoNormal">Stone grader (SP-650)</p> <p class="MsoNormal">Pro Angle Master (WM-200)</p> <p class="MsoNormal">Honing compound (PA-70)</p> <p class="MsoNormal">Handbook (HB-10)</p> <p class="MsoNormal">Instruction video (DVD-1)</p> <p class="MsoNormal">Edge marker (EM-15)</p> <p class="MsoNormal">Voucher for free participation in a one-day workshop of your choice or a discount of €100 for a multi-day workshop</p> <p class="MsoNormal">Comes with Tormek manual in German language.</p> <p class="MsoNormal">Tormek Sharpening System</p> <p class="MsoNormal">Proven for many years and constantly perfected wet working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.</p> <p class="MsoNormal">The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The offset front end can also be used for flat honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.</p> <p class="MsoNormal">A summary of the advantages of Tormek sharpening machines</p> <p class="MsoNormal">Longer working life of T-8 and T-4 Original:</p> <p class="MsoNormal">Stainless steel spindle with EzyLock-System for easier stone assembling</p> <p class="MsoNormal">Solid zinc cast housing with integrated vertical and horizontal support</p> <p class="MsoNormal">Better motor insulation</p> <p class="MsoNormal"></p> <p class="MsoNormal">Additional advantages of T-8 Original:</p> <p class="MsoNormal">Electrophoretic dip painted casing, zinc cast housing frame and robust ABS plastic sides for better corrosion protection</p> <p class="MsoNormal">Silent running, maintenance free motor, designed for continuous operation, 25 000 hour life</p> <p class="MsoNormal">Improved water container with screw lift for easy positioning, overspill rim, drip-off plate, magnetic swarf collector and magnetic cleaning scraper</p> <p></p> <p></p>

032.007