Veritas Side-Clamping Honing Guide

5/ 5

<p>For short carving blades, hollow gouges and V-parting tools or small woodturning gouges A plastic cap on the pressure screw avoids pressure marks on the tools. Clamping width max. 36 mm.</p> <p></p>

032.332

5/ 5

<p>Suitable for Tormek T-3, T-4 and old series models.</p> <p></p>

032.350

5/ 5

<p>Thanks to the wide flat rest with adjustable angle, this system is suitable for scrapers and parting tools as well as chisels and plane blades. Includes a left and right base with eccentric locking mechanism, arm rest and flat rest. Flat rest 126 x 76 mm.</p> <p>The Oneway sharpening system was specially designed for woodturning tools but, with its two different jigs, is also suitable for chisels and plane blades as well as other tools. The arm is fitted to a double-wheeled grinder using a base system (fits all common models).</p> <p></p>

032.336

5/ 5

<p>For setting the grinding angle and checking the bevel geometry.</p> <p>Grinding jigs and accessories are suitable for all models (T-3, T-4, T-7 and T-8) unless otherwise noted.</p> <p></p>

032.025

5/ 5

<p>Our Sharpening Primer Woodturning contains detailed instructions on how to sharpen turning tools. It also contains consistent and practical descriptions of specific types of grinds produced using Tormek jigs and the Oneway Wolverine grinding jig (on a double-wheeled grinder). The protrusions required to do so are relatively easy to adjust by simply resting the sharpening guide against the edge of this gauge and pushing the woodturning tool into the relevant pocket right up to the stop. This removes the need to measure the tool afterwards. Supplied with Sharpening Primer in German. Dimensions 265 x 150 x 24 mm</p> <p></p>

032.263

5/ 5

<p>For cleaning resinified tools and all types of woodworking machinery. Simply spray and the resin can be removed easily and without residue.</p> <p>Effective cleaner for burned-in resin residue</p> <p>For saw blades, plane blades, chisels and other resinified tools</p> <p>Extremely economical and easy to use</p> <p>Foams - no dripping</p> <p>Spray - wipe - done</p> <p>After cleaning, apply Ballistol all-purpose oil to neutralise the resin remover and help preserve the tool.</p> <p></p>

032.314

5/ 5

<p>With plastic rollers and a folding angle gauge, incl. sharpening stone and oil.</p> <p>Max. blade width 65 mm</p> <p>Max. blade thickness 9 mm</p> <p>Grit 120 / 240</p> <p></p>

032.259

5/ 5

<p>Maximum precision and solid zinc cast housing</p> <p>The TORMEK T-8 Original takes precision and stability to a completely new level. The new design integrates the previously mounted sleeves for the vertical and horizontal support into the revolutionary fully cast top and frame. The enhanced stability optimises jig guidance and thus the sharpening accuracy.</p> <p>The Tormek DE-250 diamond grinding wheel with a grit size of 1200 provides a very fine grinding surface and is ideal for carving tools, knives, chisels or plane blades. Thanks to the additional grinding surface on the side, a straight bevel can be ground into the tool without hollow grinding. For sharpening on the side of the diamond grinding wheel, we recommend the Tormek Multi Base (MB-100) with the appropriate sharpening device for the respective tool.</p> <p>Sharpening wheel ""Tormek DE-250"", grit 1200, Ø 250 x 50 mm; leather honing wheel Ø 215 x 30 mm; universal support with fine adjustment (can be used horizontally or vertically). 230 V, 200 W, 90 rpm, torque 14.7 Nm, 14.8 kg.</p> <p>Includes:</p> <p>Square Edge Jig (SE-77)</p> <p>Adjustable Trueing Tool (TT-50) and Stone Grader (SP-650) for purchasing additional standard sharpening wheels (water stones)</p> <p>Anti-corrosion Concentrate, 150 ml (ACC-150)</p> <p>Pro Angle Master (WM-200)</p> <p>Honing Compound (PA-70)</p> <p>Handbook (HB-10)</p> <p>Instruction Video (DVD-1)</p> <p>Edge marker (EM-15)</p> <p>Comes with Tormek manual in German language.</p> <p>Tormek Sharpening System</p> <p>Proven for many years and constantly perfected wet working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.</p> <p>The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The offset front end can also be used for flat honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.</p> <p>A summary of the advantages of Tormek sharpening machines</p> <p>Longer working life of T-8 and T-4 Original:</p> <p>Stainless steel spindle with EzyLock-System for easier stone assembling</p> <p>Solid zinc cast housing with integrated vertical and horizontal support</p> <p>Better motor insulation</p> <p></p> <p>Additional advantages of T-8 Original:</p> <p>Electrophoretic dip painted casing, zinc cast housing frame and robust ABS plastic sides for better corrosion protection</p> <p>Silent running, maintenance free motor, designed for continuous operation, 25 000 hour life</p> <p>Improved water container with screw lift for easy positioning, overspill rim, drip-off plate, magnetic swarf collector and magnetic cleaning scraper</p> <p></p>

032.325

5/ 5

<p>These wax-like polishing pastes are applied to felt buffing wheels and smooth leather sides of strops. Only for steel/stainless steel.</p> <p></p>

032.299

5/ 5

<p>Belgian Coticule Whetstones</p> <p>The quarrying of Belgian whetstones in the Ardennes is first mentioned in a Roman document. But the story of these natural honing stones goes further back than that. The approx. 480 million-year-old grey yellow sedimentary stones, originating from volcanic ash, are composed of very fine garnet crystals. During honing, these are released from the matrix and, in combination with water and abrasion debris, make a honing paste. The garnets only remove fine shavings from the metal and ensure a good polish. Unique combination of quick abrasive action and grain size.</p> <p>Interesting fact: To produce 1 kg of sharpening stones approx. 1500 kg of cliff must be removed. The thin yellow slices are glued to a slate base and cut to size.</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p></p> <p>Grit 6000-8000</p> <p>Dimensions 33-39 cm²</p> <p></p>

032.402

5/ 5

<p>Blade length min. 60 mm.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p>Model SVM-45</p> <p>Width 45 mm</p> <p></p>

032.011

5/ 5

<p>Coarse corresponds to grit 220 and fine corresponds to grit 1000.</p> <p>The gentle, highly pure white aluminium oxideused for the manufacturing of this stone is much finer than the abrasives of other synthetic oilstones. Additionally the stone is highly effective and does not clog easily. Pre-soaked with oil in the factory, it comes ready for use.</p> <p>Grit fine/coarse</p> <p>Dimensions 203 x 51 x 25 mm</p> <p></p>

032.195

5/ 5

<p>Fine-grit waterstones for removing burr, polishing and honing. Comes with Nagura stone.</p> <p>Cerax by Suehiro</p> <p>Cerax is the best-known brand of the Suehiro company. The stones sold under this name have a medium-hard bond and are particularly suitable for high-alloy tool steels but also for low-alloy carbon steels. The coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly. The stone with the base has extra stability and is easy to store. A Nagura stone is used for cleaning and unclogging the surface of the stone and for creating a fine polishing paste. Before use, soak the stones in water for at least 10 minutes, but do not store them in water permanently. White aluminium oxideabrasive.</p> <p>Dimensions 206 x 73 x 23 mm</p> <p>Base without base</p> <p></p>

032.367

5/ 5

<p>Short jig, axe jig, knife jig, small knife holder, long slender knives jig, scissors jig. Comes in practical plastic box with hard foam inlay.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8</p> <p></p>

032.347

5/ 5

<p>Sharpening the complex tip geometry of a drill by hand requires plenty of practice. Using the Tormek drill bit sharpener attachment, you can now sharpen a 4-facet drill bit with the usual wet working sharpening method on your drill for maximum precision and service life. The optimum point and clearance angles can be set for any drilling operation with regard to the size of the drill and the material to be worked on. Even drills which are completely blunt and have their tips broken off can be returned to the perfect shape through sharpening. Point angles 90-150°.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p>Ø 3-22 mm</p> <p></p>

032.021

5/ 5

032.069