DICTUM Short Tool Jig SW-36

5/ 5

<p>Combination sharpening stone with two different grits.</p> <p>Missarka Sharpening Stones</p> <p>The Missarka sharpening stone is made of white aluminium oxide* in a vitrified bond created by a sintering process. Thanks to its hard bond, the stone stays flat for longer time. It is ideal for high-alloy tool steels. The tool steels made of alloy components with a coarse grain structure (e.g. chromium and vanadium) require a stone that does not wear quickly. It is possible to hone with both water and oil (but after use with oil you can no longer use it with water). The stone can be permanently kept in water.</p> <p>* Abrasive used for 150 grit = green silicon carbide</p> <p>Dimensions 200 x 60 x 25 mm</p> <p></p>

032.114

5/ 5

<p>Ballistol provides reliable rust protection, cleans and oils metals, impregnates and preserves leather and wood surfaces, and is even suitable for the disinfection of minor cuts. In the garden it can be used to treat tree cancer and to combat aphids (in a 3 % solution with water). Ballistol is based on pure medical white oil, spiked with natural plant products. It is thus ecologically-friendly and bio-degradable.</p> <p>Content 500 ml</p> <p>Container Storage container</p> <p></p>

032.317

5/ 5

<p>These rubberised abrasive blocks provide an effective means of removing surface rust from valuable knives without damaging the blades. Using water as a lubricant, the rust is ""erased"". The blocks are also excellent for removing tough stains from pots, taps, sinks, antiques and automotive parts.</p> <p>Dimensions 80 x 50 x 20 mm</p> <p></p>

032.308

5/ 5

<p>Continuous surface diamond coating on compact base plate. Ideal for pointed tools or accurately trueing the backs of tools (extraordinary flatness). Rubber feet.</p> <p>DMT Diamond Stones</p> <p>The American manufacturer Diamond Machining Technology (DMT) is the founder of interrupted surface technology for diamond sharpening stones, and has been the market leader for diamond-coated sharpening equipment for years. The high-quality sharpening tools are manufactured at the company's headquarters in Massachusetts (USA).</p> <p>Monocrystalline* diamond particles guarantee a long service life and excellent material removal</p> <p>Uniform grit sizes and a dense diamond distribution for even grinding patterns</p> <p>Round recesses prevent clogging due to grinding debris</p> <p>Permanently flat and warp-free thanks to supporting plates made of steel or warp-free plastic with a nickel matrix</p> <p>Colour coding of various grit sizes</p> <p>100 % made in the USA</p> <p>Monocrystalline* diamond-coated sharpening devices:</p> <p>Diamond-coated sharpening devices remain permanently flat, and are especially suitable for tools with straight blades, as well as for producing flat surfaces (e.g. backs of plane and chisel blades, plane soles, scrapers). Also suitable for carbide coated cutters, tool steels, HSS and non-metal materials (glass, ceramic, etc.). We recommend moistening diamond-coated sharpening devices with water and grinding with little pressure.</p> <p>* Monocrystalline diamonds are significantly more wear resistant than the polycrystalline diamonds used to make lower quality diamond sharpening tools.</p> <p> </p> <p></p> <p></p>

032.100

5/ 5

<p>Belgian Coticule Whetstones</p> <p>The quarrying of Belgian whetstones in the Ardennes is first mentioned in a Roman document. But the story of these natural honing stones goes further back than that. The approx. 480 million-year-old grey yellow sedimentary stones, originating from volcanic ash, are composed of very fine garnet crystals. During honing, these are released from the matrix and, in combination with water and abrasion debris, make a honing paste. The garnets only remove fine shavings from the metal and ensure a good polish. Unique combination of quick abrasive action and grain size.</p> <p>Interesting fact: To produce 1 kg of sharpening stones approx. 1500 kg of cliff must be removed. The thin yellow slices are glued to a slate base and cut to size.</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p></p> <p>Grit 6000-8000</p> <p>Dimensions 33-39 cm²</p> <p></p>

032.402

5/ 5

<p>The wooden box provides a convenient and elegant way to store the three Whetstone sharpening blocks that are included with the set and to protect them from damage and dirt. Block size 152 x 50 x 19 mm. Coarse, fine, extra-fine grit. The wooden box is made of cherry tree wood and has non-slip rubber feet.</p> <p>Wooden box 200 x 190 x 40 mm.</p> <p>DMT Diamond Stones</p> <p>The American manufacturer Diamond Machining Technology (DMT) is the founder of interrupted surface technology for diamond sharpening stones, and has been the market leader for diamond-coated sharpening equipment for years. The high-quality sharpening tools are manufactured at the company's headquarters in Massachusetts (USA).</p> <p>Monocrystalline* diamond particles guarantee a long service life and excellent material removal</p> <p>Uniform grit sizes and a dense diamond distribution for even grinding patterns</p> <p>Round recesses prevent clogging due to grinding debris</p> <p>Permanently flat and warp-free thanks to supporting plates made of steel or warp-free plastic with a nickel matrix</p> <p>Colour coding of various grit sizes</p> <p>100 % made in the USA</p> <p>Monocrystalline* diamond-coated sharpening devices:</p> <p>Diamond-coated sharpening devices remain permanently flat, and are especially suitable for tools with straight blades, as well as for producing flat surfaces (e.g. backs of plane and chisel blades, plane soles, scrapers). Also suitable for carbide coated cutters, tool steels, HSS and non-metal materials (glass, ceramic, etc.). We recommend moistening diamond-coated sharpening devices with water and grinding with little pressure.</p> <p>* Monocrystalline diamonds are significantly more wear resistant than the polycrystalline diamonds used to make lower quality diamond sharpening tools.</p> <p></p>

032.187

5/ 5

<p>Belgian Coticule Whetstones</p> <p>The quarrying of Belgian coticules in the Ardennes is first mentioned in a Roman document. But the story of these natural honing stones goes further back than that. The approx. 480 million-year-old grey yellow sedimentary stones, originating from volcanic ash, are composed of very fine garnet crystals. During honing, these are released from the matrix and, in combination with water and abrasion debris, make a honing paste. The garnets only remove fine shavings from the metal and ensure a good polish. Unique combination of quick abrasive action and grain size.</p> <p>Interesting fact: To produce 1 kg of sharpening stones, approx. 1500 kg of solid rock must be removed. The thin yellow slices are glued to a slate base and cut to size.</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p></p> <p>Dimensions 75 x 3-7 mm</p> <p></p>

032.403

5/ 5

<p>Blade length min. 160 mm.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p>Model SVM-140</p> <p>Width 140 mm</p> <p></p>

032.018

5/ 5

<p>This hard-bond stone is suitable for pre-sharpening double-layered blades as well as chrome-vanadium steel and HSS.</p> <p>Fits models 2000-2006, T-7, and T-8.</p> <p>Centre hole 12 mm</p> <p>Grit 220</p> <p>Ø 250 mm</p> <p>Width 50 mm</p> <p></p>

032.030

5/ 5

<p>For cleaning resinified tools and all types of woodworking machinery. Simply spray and the resin can be removed easily and without residue.</p> <p>Effective cleaner for burned-in resin residue</p> <p>For saw blades, plane blades, chisels and other resinified tools</p> <p>Extremely economical and easy to use</p> <p>Foams - no dripping</p> <p>Spray - wipe - done</p> <p>After cleaning, apply Ballistol all-purpose oil to neutralise the resin remover and help preserve the tool.</p> <p></p>

032.314

5/ 5

<p>All metal parts made of stainless steel</p> <p>Non-slip rubber clamping jaws</p> <p>Mid-mounted support bracket for thin stones</p> <p>Extra-large rest area</p> <p>High rest for more free space when sharpening</p> <p>Width 75 mm</p> <p>Jaw opening 135-220 mm</p> <p>Support height 32 mm</p> <p></p>

032.070

5/ 5

<p>Maximum precision and solid zinc cast housing</p> <p>TORMEK T-8 Original takes precision and stability to a completely new level. The new design integrates the previously mounted sleeves for the vertical and horizontal support into the revolutionary fully cast top and frame. The enhanced stability optimizes jig guidance and thus the sharpening accuracy.</p> <p>The Tormek DC-250 Diamond Grinding Wheel with grit 360 achieves efficient removal and quickly repairs a blunt or damaged cutting edge. It is the ideal grinder for the turner and is particularly durable. The high quality of the diamond grinding surface ensures efficient, constant sharpening with a constant wheel diameter. With this set you also receive all relevant sharpening guides.</p> <p>Diamond grinding wheel ""Tormek DC-250"", grit 360, Ø 250 x 50 mm; leather honing wheel Ø 215 x 30 mm; universal support with fine adjustment (can be used horizontally or vertically). 230 V, 200 W, 90 rpm, torque 14.7 Nm, 14.8 kg.</p> <p>Includes:</p> <p>Square edge jig (SE-77)</p> <p>Adjustable trueing tool (TT-50) and stone grader (SP-650) for additional standard sharpening wheels (water stones)</p> <p>Anti-corrosion concentrate, 150 ml (ACC-150)</p> <p>Pro Angle Master (WM-200)</p> <p>Honing compound (PA-70)</p> <p>Handbook (HB-10)</p> <p>Instruction video (DVD-1)</p> <p>Woodturner's kit (TNT-808)</p> <p>Edge marker (EM-15)</p> <p>Comes with Tormek manual in German language.</p> <p>Tormek Sharpening System</p> <p>Proven for many years and constantly perfected wet working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.</p> <p>The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The offset front end can also be used for flat honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.</p> <p>A summary of the advantages of Tormek sharpening machines</p> <p>Longer working life of T-8 and T-4 Original:</p> <p>Stainless steel spindle with EzyLock-System for easier stone assembling</p> <p>Solid zinc cast housing with integrated vertical and horizontal support</p> <p>Better motor insulation</p> <p></p> <p>Additional advantages of T-8 Original:</p> <p>Electrophoretic dip painted casing, zinc cast housing frame and robust ABS plastic sides for better corrosion protection</p> <p>Silent running, maintenance free motor, designed for continuous operation, 25 000 hour life</p> <p>Improved water container with screw lift for easy positioning, overspill rim, drip-off plate, magnetic swarf collector and magnetic cleaning scraper</p> <p></p>

032.326

5/ 5

<p>Aluminium oxide abrasive.</p> <p>Kunsuto Oilstones</p> <p>These stones were developed to offer a complete series of sharpening oilstones for sculpting gouges and chisels. Until now, only coarse synthetic oilstones (Norton India) and Arkansas natural stones with very fine grit were available on the market in good quality. The Kunsuto sharpening stones close this gap and allow a continuous sharpening process with oilstones of grit 220 and 1000 (Norton India), the medium grits 2000 and 4000 for shaping the cutting edge (Kunsuto), and the Arkansas natural stone. The development process of the stones made in Germany was supported by microscope images of the cutting edges after sharpening. Pre-soaked with oil in the factory, it comes ready for use.</p> <p>Grit 2000</p> <p>Dimensions 200 x 50 x 25 mm</p> <p></p>

032.136

5/ 5

<p>Convert your standard Veritas Sharpening System II into a self-centring double jaw honing guide. Simply replace the standard clamping unit by the double jaw clamp and you're done! The double jaw honing device allows for the precise and easy sharpening of even the narrowest chisels, mortise chisels or plane blades while exactly maintaining an angle of 90°. Also suitable for short Japanese blades. Fits Veritas Sharpening System II and Camber Roller Assembly </p> <p>Max. blade width 38 mm</p> <p>Max. blade thickness 12 mm</p> <p></p>

032.306

5/ 5

<p>For hollow gouges and turning tools, as well as interchangeable cutters for hollowing tools etc., up to 36 mm wide. Adjustable in cutting angle and shape. With the SVD-186 R Gouge Jig, you will get an exact replication of both the shape and edge angle on your bowl gouges and spindle gouges, so you can be sure that the tool will behave in the same predictable way on the lathe after every sharpening. Used correctly and together with your Tormek tool sharpener, there is no alternative method that can give you faster or sharper results.</p> <p>The jig can be set for various lengths of the side bevel. Mount your cutter onto the special shaft that is included with the jig, and you get a controlled sharpening.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p></p>

032.008

5/ 5

<p>Linen, suitable for Tormek T-7 and T-8.</p> <p></p>

032.411