Veritas Narrow Blade Clamp for Veritas Sharpening System II

5/ 5

<p>Arkansas stones are available in different hardnesses on the market. They are called Soft, Hard, Hard Black, Surgical and Translucent and differ in grit size.</p> <p>Arkansas Oilstones</p> <p>Fine grained, extremely wear-resistant honing stones, for use with an oil lubricant. Due to their high degree of hardness, they are ideal for polishing curved cutting edges. The stones we offer have a uniform structure and are crack-free. They originate from quarries in the Ouachita Mountains in Arkansas (USA).</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p></p> <p>Grit 2000-3000</p> <p>Dimensions 205 x 50 x 13 mm</p> <p></p>

032.082

5/ 5

<p>Shaping stone with good sharpening qualities. Silicon carbide abrasive.</p> <p>Traditional Stone by Naniwa</p> <p>This stone series is suitable for sharpening blunt knives and tool blades. The stone has a relatively hard bond, it therefore stays flat for a longer time. It is ideal for high-alloy tool steels, but also for low-alloy carbon steels. The tool steels made of alloy components with a coarse grain structure (e.g. chromium and vanadium) require a stone that does not wear quickly. Before use, soak the stone for at least 10 minutes. Do not keep it in water permanently.</p> <p>Naniwa has changed the name and the packaging of this sharpening stone series (formerly known as DX Stone). The sharpening stone itself has not been changed.</p> <p>Grit 220</p> <p>Dimensions 210 x 70 x 20 mm</p> <p></p>

032.181

5/ 5

<p>Arkansas stones are available in different hardnesses on the market. They are called Soft, Hard, Hard Black, Surgical and Translucent and differ in grit size.</p> <p>Arkansas Oilstones</p> <p>Fine grained, extremely wear-resistant honing stones, for use with an oil lubricant. Due to their high degree of hardness, they are ideal for polishing curved cutting edges. The stones we offer have a uniform structure and are crack-free. They originate from quarries in the Ouachita Mountains in Arkansas (USA).</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p> </p> <p>Grit 6000-8000</p> <p>Dimensions 200 x 48 x 20 mm</p> <p></p>

032.085

5/ 5

<p>Sharpening the complex tip geometry of a drill by hand requires plenty of practice. Using the Tormek drill bit sharpener attachment, you can now sharpen a 4-facet drill bit with the usual wet working sharpening method on your drill for maximum precision and service life. The optimum point and clearance angles can be set for any drilling operation with regard to the size of the drill and the material to be worked on. Even drills which are completely blunt and have their tips broken off can be returned to the perfect shape through sharpening. Point angles 90-150°.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p>Ø 3-22 mm</p> <p></p>

032.021

5/ 5

<p>The Super Stone S1 is equivalent to the Super Stone S2. The different name is merely due to the smaller abrasive thickness of 10 mm. This stone series therefore is a reasonably-priced alternative for sharpening jobs where only small material removal is needed, e.g. the sharpening of razors.</p> <p>Super Stone by Naniwa</p> <p>This sharpening stone series is particularly suitable for the final polishing of knife blades. The stones provide a high polishing effect and stay flat for a long time, even though it feels as comfortable as working on soft natural stones. Those series are ideal for sharpening extremely hard low-alloy carbon steels(White and Blue Paper Steel). Before use, soak the stone for at least 10 minutes. Do not keep it in water permanently. White aluminium oxideabrasive.</p> <p>Dimensions 210 x 70 x 10 mm</p> <p></p>

032.174

5/ 5

<p>"For sharpening and finishing.</p> <p>With two different grits. Comes with Nagura stone. For sharpening and finishing.</p> <p>Cerax by Suehiro</p> <p>Cerax is the best-known brand of the Suehiro company. The stones sold under this name have a medium-hard bond and are particularly suitable for high-alloy tool steels but also for low-alloy carbon steels. The coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly. The stone with the base has extra stability and is easy to store. A Nagura stone is used for cleaning and unclogging the surface of the stone and for creating a fine polishing paste. Before use, soak the stones in water for at least 10 minutes, but do not store them in water permanently. White aluminium oxideabrasive.</p> <p>Grit 1000/6000</p> <p>Dimensions 183 x 63 x 32 mm</p> <p>Base with base</p> <p></p>

032.370

5/ 5

<p>Ideal for sharpening and honing of all types of cutting tools: gouges with inside or outside bevel, V-parting tools. The back of the stone can also be used on chisels. Comes with eraser for cleaning. White aluminium oxideabrasive.</p> <p>Suehiro</p> <p>The stones from the original Suehiro series have a relatively soft bond and are thus designed for low-alloy carbon steels (Blue and White Paper Steel). The stones should be sprayed with water before use. It is not recommended to keep them in water permanently.</p> <p>Dimensions 98 x 65 x 20 mm</p> <p></p>

032.209

5/ 5

<p>This sharpening system allows the sharpening of bevels of 25° and 30° on one side and 27° and 32° on the opposite side, thus allowing the grinding of a micro bevel. Suitable for plane blades and chisels, without requiring time-consuming adjustments. The dry grinding system means it can be used irrespective of environmental conditions. Hence, it is ideal for use on construction sites and anywhere where quick results are needed without requiring maximum sharpness.</p> <p>Insertion of the magnetically attached diamond stone with corresponding grit</p> <p>Insertion of slide with alignment for 25° and 30° bevel angles or 27°and 32° bevel angles</p> <p>Insertion of plane blade/chisel and fixing in place at stop against counter-pressure</p> <p>Grinding of bevel angle by moving the slide</p> <p>Where necessary, removal of the burr on the back of the blade</p> <p></p> <p>Tool support and slide are made of solid milled and anodised aluminium with dovetail guide and wear-resistant nylon slide rail.</p> <p>M. Power Tools DC Diamond Stones</p> <p>Diamond Cross (DC) sharpening stones offer an excellent price/performance ratio with a high manufacturing quality. The lapping of the supporting plates and the stringent quality controls are performed at the company's headquarters in England.</p> <p>Monocrystalline* diamond particles guarantee a long service life and excellent material removal</p> <p>Uniform grit sizes and a dense diamond distribution for even grinding patterns</p> <p>Cross-shaped recesses prevent clogging due to grinding debris</p> <p>Permanently flat and warp-free thanks to specially lapped supporting plates made of steel with a stainless steel matrix</p> <p>Monocrystalline* diamond-coated sharpening devices:</p> <p>Diamond-coated sharpening devices remain permanently flat, and are especially suitable for tools with straight blades, as well as for producing flat surfaces (e.g. backs of plane and chisel blades, plane soles, scrapers). Also suitable for carbide coated cutters, tool steels, HSS and non-metal materials (glass, ceramic, etc.). We recommend moistening diamond-coated sharpening devices with water and grinding with little pressure.</p> <p>* Monocrystalline diamonds are significantly more wear resistant than the polycrystalline diamonds used to make lesser quality diamond sharpening tools.</p> <p>Scope of delivery</p> <p></p> <p>Fasttrack MK2 sharpening system, 1 x diamond stone medium-coarse, 1 x diamond stone medium-fine, cleaning block, removable fence, non-slip mat.</p> <p> </p> <p>Max. blade width 64 mm</p> <p></p>

032.352

5/ 5

<p>The Rust Loosener and Contact Spray is indispensible for repairs, maintenance and servicing. Thanks to its excellent creeping capacity, the Rust Loosener and Contact Spray reaches even the smallest intermediate spaces. The 3-way spray valve makes it possible to work in any position (even overhead).</p> <p>Loosens rusted and stiff parts, screws, bolts, joints and hinges</p> <p>Protects against corrosion and oxidation</p> <p>Repels moisture and reduces electrical resistance in contacts</p> <p>Secures the function of mechanical parts and contacts</p> <p>Provides lubrication, cleans and cares for metal surfaces, mechanical parts and electrical systems</p> <p></p>

032.312

5/ 5

<p>Oil pot, including absorbent cotton, fitted with a wick. For protecting blades and for greasing when chiselling out mortises. Use with camellia oil (not included).</p> <p>Capacity 100 ml.</p> <p></p>

032.289

5/ 5

<p>For sharpening and finishing.</p> <p>With two different grits. Comes with Nagura stone. For sharpening and finishing.</p> <p>Cerax by Suehiro</p> <p>Cerax is the best-known brand of the Suehiro company. The stones sold under this name have a medium-hard bond and are particularly suitable for high-alloy tool steels but also for low-alloy carbon steels. The coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly. The stone with the base has extra stability and is easy to store. A Nagura stone is used for cleaning and unclogging the surface of the stone and for creating a fine polishing paste. Before use, soak the stones in water for at least 10 minutes, but do not store them in water permanently. White aluminium oxideabrasive.</p> <p>Grit 1000/6000</p> <p>Dimensions 183 x 63 x 32 mm</p> <p>Base without base</p> <p></p>

032.369

5/ 5

<p>This high-quality cast iron sharpening guide with its large clamping surface is ideal for sharpening Japanese plane blades and very wide chisels. The long roller prevents tilting during sharpening. Light and comfortable to use, thanks to large winged walnut handles.</p> <p>Max. blade width 78 mm</p> <p>Max. blade thickness 12 mm</p> <p></p>

032.264

5/ 5

<p>This multifunctional deluxe set allows for the precise and easy sharpening of nearly all tool blades, whether they have straight or slightly rounded cutting edges, whether the blade width is 2 mm or 72 mm.</p> <p>The set includes:</p> <p>Standard clamping unit for cutting tool edges up to 72 mm width, also suited for blades with bevel or chamfered edges</p> <p>Double jaw clamp, suited for the narrowest chisels, mortise chisels or plane blades; the lateral clamping ensures precise perpendicular sharpening, especially for narrow blades with straight edges; max. blade width 38 mm</p> <p>Sharpening device with straight roller, suited for sharpening straight edges</p> <p>Sharpening device with barrel-shaped roller for sharpening and honing slight curves, e.g. for smoothing plane blades</p> <p>Setting gauge with fence for bevel angle 15°-54° (with double jaw honing device 15°-40°), counter chamfer 10°-20°</p> <p>The adjustable brass roller allows for increasing the angle of inclination by up to 2° when creating a micro bevel without unclamping the tool. Made of die-cast aluminium, easy-gliding brass roller.</p> <p></p> <p>Max. blade width 72 / 38 mm</p> <p>Max. blade thickness 12 mm</p> <p></p>

032.307

5/ 5

<p>This hard-bond stone is suitable for pre-sharpening double-layered blades as well as chrome-vanadium steel and HSS.</p> <p>Fits models 1200-1206, T-3, and T-4.</p> <p>Centre hole 12 mm</p> <p>Grit 220</p> <p>Ø 200 mm</p> <p>Width 40 mm</p> <p></p>

032.029

5/ 5

<p>This sharpening stone is thicker than the standard version with a longer service life. Comes with plastic case.</p> <p>Glass Stones by Shapton</p> <p>The premium range from Japanese company Shapton is the ""Glass Stone"" series. The sharpening particles are highly pure and homogeneous. This is noticeable when changing to finer grits: the traces from the previous grit are quickly ground out. A special bond allows quick sharpening on a flat surface. The sharpening stone has a base of tempered glass and is thus 100 % warp-free. Conventional sharpening stones may warp microscopically by absorbing water, but Shapton stones solve this problem with their extremely flat base of tempered glass.</p> <p>Another advantage of the glass base is that the grit rating on the underside is always visible even after much use. Before use, spray the stones with water. It is not recommended to keep them in water permanently. White aluminium oxideabrasive.</p> <p> </p> <p>Grit 500</p> <p>Dimensions 210 x 70 x 15 mm</p> <p>Abrasive thickness 10 mm</p> <p></p>

032.111

5/ 5

<p>Maximum precision and solid zinc cast housing</p> <p>TORMEK T-8 Original takes precision and stability to a completely new level. The new design integrates the previously mounted sleeves for the vertical and horizontal support into the revolutionary fully cast top and frame. The enhanced stability optimizes jig guidance and thus the sharpening accuracy.</p> <p>The Tormek DC-250 Diamond Grinding Wheel with grit 360 achieves efficient removal and quickly repairs a blunt or damaged cutting edge. It is the ideal grinder for the turner and is particularly durable. The high quality of the diamond grinding surface ensures efficient, constant sharpening with a constant wheel diameter. With this set you also receive all relevant sharpening guides.</p> <p>Diamond grinding wheel ""Tormek DC-250"", grit 360, Ø 250 x 50 mm; leather honing wheel Ø 215 x 30 mm; universal support with fine adjustment (can be used horizontally or vertically). 230 V, 200 W, 90 rpm, torque 14.7 Nm, 14.8 kg.</p> <p>Includes:</p> <p>Square edge jig (SE-77)</p> <p>Adjustable trueing tool (TT-50) and stone grader (SP-650) for additional standard sharpening wheels (water stones)</p> <p>Anti-corrosion concentrate, 150 ml (ACC-150)</p> <p>Pro Angle Master (WM-200)</p> <p>Honing compound (PA-70)</p> <p>Handbook (HB-10)</p> <p>Instruction video (DVD-1)</p> <p>Woodturner's kit (TNT-808)</p> <p>Edge marker (EM-15)</p> <p>Comes with Tormek manual in German language.</p> <p>Tormek Sharpening System</p> <p>Proven for many years and constantly perfected wet working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.</p> <p>The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The offset front end can also be used for flat honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.</p> <p>A summary of the advantages of Tormek sharpening machines</p> <p>Longer working life of T-8 and T-4 Original:</p> <p>Stainless steel spindle with EzyLock-System for easier stone assembling</p> <p>Solid zinc cast housing with integrated vertical and horizontal support</p> <p>Better motor insulation</p> <p></p> <p>Additional advantages of T-8 Original:</p> <p>Electrophoretic dip painted casing, zinc cast housing frame and robust ABS plastic sides for better corrosion protection</p> <p>Silent running, maintenance free motor, designed for continuous operation, 25 000 hour life</p> <p>Improved water container with screw lift for easy positioning, overspill rim, drip-off plate, magnetic swarf collector and magnetic cleaning scraper</p> <p></p>

032.326