Double Jaw Honing Guide

5/ 5

<p>Hibiki Stone by Naniwa</p> <p>This stone series is especially suitable for sharpening tool blades as well as for honing the back, e.g. on chisels or plane blades. Thanks to its particularly hard bond, the stone remains flat for a longer time. These stones are ideal for extremely hard, low-alloy carbon steels (White and Blue Paper Steel). Before use, soak the stones in water for at least 10 minutes. It is not recommended to keep them in water permanently.</p> <p>Grit 3000</p> <p>Dimensions 206 x 70 x 20 mm</p> <p></p>

032.129

5/ 5

<p>All metal parts made of stainless steel</p> <p>Anti-slip rubber clamping jaws</p> <p>Mid-mounted support bracket for thin stones</p> <p>Width 70 mm</p> <p>Jaw opening 135-220 mm</p> <p>Support height 23 mm</p> <p></p>

032.237

5/ 5

<p>Arkansas stones are available in different hardnesses on the market. They are called Soft, Hard, Hard Black, Surgical and Translucent and differ in grit size.</p> <p>Arkansas Oilstones</p> <p>Fine grained, extremely wear-resistant honing stones, for use with an oil lubricant. Due to their high degree of hardness, they are ideal for polishing curved cutting edges. The stones we offer have a uniform structure and are crack-free. They originate from quarries in the Ouachita Mountains in Arkansas (USA).</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p> </p> <p>Grit 6000-8000</p> <p>Dimensions 200 x 48 x 20 mm</p> <p></p>

032.085

5/ 5

<p>Grit 280 (No. 032.208), grit 1000 (No. 032.209) and grit 3000 (No. 032.210) in a set. White aluminium oxideabrasive.</p> <p>Suehiro</p> <p>The stones from the original Suehiro series have a relatively soft bond and are thus designed for low-alloy carbon steels (Blue and White Paper Steel). The stones should be sprayed with water before use. It is not recommended to keep them in water permanently.</p> <p></p>

032.212

5/ 5

<p>Excellent-value set for the precise trueing of waterstones and oil stones. For dressing stones and keeping their surfaces flat.</p> <p>Set includes:</p> <p>Granite stone plate, 280 x 130 x 20 mm, flatness tolerance &lt; 0.1 mm (colour may vary)</p> <p>100 grit wet/dry abrasive paper from Klingspor (20 sheets, 280 x 115 mm)</p> <p>Anti-slip feet for stone plate</p> <p></p>

032.231

5/ 5

<p>Thicker and longer lasting than the cream-coloured stones, but with equally good honing properties.</p> <p>Belgian Coticule Whetstones</p> <p>The quarrying of Belgian whetstones in the Ardennes is first mentioned in a Roman document. But the story of these natural honing stones goes further back than that. The approx. 480 million-year-old grey yellow sedimentary stones, originating from volcanic ash, are composed of very fine garnet crystals. During honing, these are released from the matrix and, in combination with water and abrasion debris, make a honing paste. The garnets only remove fine shavings from the metal and ensure a good polish. Unique combination of quick abrasive action and grain size.</p> <p>Interesting fact: To produce 1 kg of sharpening stones approx. 1500 kg of cliff must be removed. The thin yellow slices are glued to a slate base and cut to size.</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p></p> <p>Dimensions 100 x 40 x 6 mm</p> <p></p>

032.217

5/ 5

<p>Fits models 2000-2006, T-7, and T-8.</p> <p>The composite honing wheel has an integrated polishing agent and is easy to handle. An advantage over the leather honing wheel is that the composite wheel can be used in clean environments and no honing paste has to be applied.</p> <p>Fits models 2000-2006, T-7, and T-8.</p> <p>Ø 220 mm</p> <p>Model CW-220</p> <p>Width 31 mm</p> <p></p>

032.344

5/ 5

<p>This sharpening stone series is suitable for extremely hard cutting steels or sharpening tasks that require an absolutely flat sharpening stone.</p> <p>Sharpening of PM steels with a hardness of around 65 HRC</p> <p>Sharpening of ceramic knife blades</p> <p>Sharpening of razors</p> <p>Sharpening the back of hairdressing scissors</p> <p>The abrasive surface consists of bonded industrial diamonds and will therefore not show signs of wear, even when used frequently. Regular dressing and wetting as with waterstones is not necessary. Simply moisten with water and get started. Comes with cleaning stone.</p> <p>Grit 400</p> <p>Dimensions 210 x 75 x 16 mm</p> <p></p>

032.374

5/ 5

<p>Delivery without content.</p> <p>250 ccm.</p> <p></p>

032.297

5/ 5

<p>Our Sharpening Primer Woodturning contains detailed instructions on how to sharpen turning tools. It also contains consistent and practical descriptions of specific types of grinds produced using Tormek jigs and the Oneway Wolverine grinding jig (on a double-wheeled grinder). The protrusions required to do so are relatively easy to adjust by simply resting the sharpening guide against the edge of this gauge and pushing the woodturning tool into the relevant pocket right up to the stop. This removes the need to measure the tool afterwards. Supplied with Sharpening Primer in German. Dimensions 265 x 150 x 24 mm</p> <p></p>

032.263

5/ 5

<p>This smooth, impregnated packaging paper with anti-corrosion additives protects your tools from moisture, rust and verdigris. A waterproof PE coating on one side provides additional protection and ensures that the emitted VCIs (vapour corrosion inhibitors) reach the metal, where they prevent possible oxidising reactions. For directly packing metal parts and for lining storage containers. Depending on the additional packaging, protection lasts from 10 months to several years. For steel, iron and aluminium parts. Paper thickness 63 g/m², 800 x 600 mm.</p> <p></p>

032.295

5/ 5

<p>For sharpening and honing.</p> <p>This stone features two different grit sizes. Abrasive: #1000 aluminium oxideand white aluminium oxide, # 3000 and 6000 white aluminium oxide.</p> <p>Kunsuto Sharpening Stone Series</p> <p>This stone series was developed in cooperation with a Japanese sharpening stone expert. The aim was to create a Japanese stone series suitable for both high-alloy tool steels and low-alloy carbon steels. The numerous tests were supported by microscopic images of the cutting edges after sharpening. This stone series has a medium-hard bond, which does not wear out quickly even with tool steels made of alloy components with a coarse grain structure (e.g. chromium and vanadium). However, both steel types allow good material removal with a pleasant ease of use. The microscopic images show a harmonious surface and a precise cutting edge form for both types of steel.</p> <p>Before use, soak the stone for at least 10 minutes. Do not keep it in water permanently.</p> <p></p> <p>Grit 1000/6000</p> <p>Dimensions 205 x 75 x 35 mm</p> <p></p>

032.390

5/ 5

<p>For the diamond stone dresser.</p> <p>Grinding jigs and accessories are suitable for all models (T-3, T-4, T-7 and T-8) unless otherwise noted.</p> <p></p>

032.028

5/ 5

<p class="MsoNormal">NEW! Ultimate precision, solid zinc-cast top</p> <p class="MsoNormal">The TORMEK T-4 Original, an advanced version of the T-3 model, takes precision and stability to a new level. Both the vertical and horizontal bases for the universal support and the integrated carrying handle are made in the same zinc casting and therefore permanently joined together. The motor and main shaft are fixed to the cast top, resulting in a solid construction which significantly improves accuracy during sharpening.</p> <p class="MsoNormal">""Tormek Original"" sharpening wheel, grit 220, Ø 200 x 40 mm; leather honing wheel Ø 145 x 26 mm; solid zinc casting top with universal support with fine adjustment (horizontal and vertical settings). Impact-resistant ABS plastic housing. 230 V, 120 W, 120 rpm, 8 kg.</p> <p class="MsoNormal">Includes:</p> <p class="MsoNormal">Stone grader (SP-650)</p> <p class="MsoNormal">Pro Angle Master (WM-200)</p> <p class="MsoNormal">Honing compound (PA-70)</p> <p class="MsoNormal">Handbook (HB-10)</p> <p class="MsoNormal">Instruction video (DVD-1)</p> <p class="MsoNormal">Edge marker (EM-15)</p> <p class="MsoNormal">Voucher for free participation in a one-day workshop of your choice or a discount of €100 for a multi-day workshop</p> <p class="MsoNormal">Comes with Tormek manual in German language.</p> <p class="MsoNormal">Tormek Sharpening System</p> <p class="MsoNormal">Proven for many years and constantly perfected wet working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.</p> <p class="MsoNormal">The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The offset front end can also be used for flat honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.</p> <p class="MsoNormal">A summary of the advantages of Tormek sharpening machines</p> <p class="MsoNormal">Longer working life of T-8 and T-4 Original:</p> <p class="MsoNormal">Stainless steel spindle with EzyLock-System for easier stone assembling</p> <p class="MsoNormal">Solid zinc cast housing with integrated vertical and horizontal support</p> <p class="MsoNormal">Better motor insulation</p> <p class="MsoNormal"></p> <p class="MsoNormal">Additional advantages of T-8 Original:</p> <p class="MsoNormal">Electrophoretic dip painted casing, zinc cast housing frame and robust ABS plastic sides for better corrosion protection</p> <p class="MsoNormal">Silent running, maintenance free motor, designed for continuous operation, 25 000 hour life</p> <p class="MsoNormal">Improved water container with screw lift for easy positioning, overspill rim, drip-off plate, magnetic swarf collector and magnetic cleaning scraper</p> <p></p> <p></p>

032.007

5/ 5

<p>Versatile, light oil from the seeds of the camellia tree.</p> <p>Corrosion protection: Camellia oil is acid-free, non-volatile and not susceptible to resinification, making it the ideal oil to protect tools, knives and weapons from rust. Made from pure natural plant products and food safe, it is ideal for preserving kitchen knives made of carbon steel.</p> <p>Wood protection: When applied to wooden surfaces, it is absorbed quickly due to its low viscosity. Once absorbed, it helps protect the wood from damage by moisture, dirt and UV light. Clear, not discolouring, it emphasizes the wood's natural beauty. Non-hardening.</p> <p>Body care: Camellia oil makes an excellent base for the preparation of lotions, creams and soaps for cosmetic use. As a massage oil or hair oil, it has for ages been found irreplaceable by Japanese geishas.</p> <p></p>

032.250

5/ 5

<p>Polishing emulsion with diamond particles for polishing or stropping knives and razors, as well as chisels or plane blades. Fits Jende Nanocloth acrylic strop block or leather honing strop block. To apply the emulsion, we recommend removing the pump cover, tipping the emulsion onto the strop block and spreading it evenly with a finger.</p> <p>Grit 1 Micron</p> <p></p>

032.272