Sharpening Stone Holder

5/ 5

<p>Hard-chromed Victorinox sharpening steel with round middle-fine cut. Comfortable black plastic handle with hand protection and hanging eyelet. To sharpen knives, simply move the blade along the two sides across the sharpening steel.</p> <p></p>

032.249

5/ 5

<p>This sharpener kit was made by DMT specially for woodturners and sculptors. It consists of two diamond-sharpening cones Ø 9.5-19.3 mm and Ø 19.3-31.8 mm as well as a cone file Ø 3.3-9.5 mm for interior rounding. In addition, it also includes a Dia Sharp sharpening card for exterior rounding and narrow in-between spaces. Comes with a practical nylon sheath with a hanging loop.</p> <p>DMT Diamond Stones</p> <p>The American manufacturer Diamond Machining Technology (DMT) is the founder of interrupted surface technology for diamond sharpening stones, and has been the market leader for diamond-coated sharpening equipment for years. The high-quality sharpening tools are manufactured at the company's headquarters in Massachusetts (USA).</p> <p>Monocrystalline* diamond particles guarantee a long service life and excellent material removal</p> <p>Uniform grit sizes and a dense diamond distribution for even grinding patterns</p> <p>Round recesses prevent clogging due to grinding debris</p> <p>Permanently flat and warp-free thanks to supporting plates made of steel or warp-free plastic with a nickel matrix</p> <p>Colour coding of various grit sizes</p> <p>100 % made in the USA</p> <p>Monocrystalline* diamond-coated sharpening devices:</p> <p>Diamond-coated sharpening devices remain permanently flat, and are especially suitable for tools with straight blades, as well as for producing flat surfaces (e.g. backs of plane and chisel blades, plane soles, scrapers). Also suitable for carbide coated cutters, tool steels, HSS and non-metal materials (glass, ceramic, etc.). We recommend moistening diamond-coated sharpening devices with water and grinding with little pressure.</p> <p>* Monocrystalline diamonds are significantly more wear resistant than the polycrystalline diamonds used to make lower quality diamond sharpening tools.</p> <p></p>

032.401

5/ 5

<p>Aluminium oxide abrasive.</p> <p>Kunsuto Oilstones</p> <p>These stones were developed to offer a complete series of sharpening oilstones for sculpting gouges and chisels. Until now, only coarse synthetic oilstones (Norton India) and Arkansas natural stones with very fine grit were available on the market in good quality. The Kunsuto sharpening stones close this gap and allow a continuous sharpening process with oilstones of grit 220 and 1000 (Norton India), the medium grits 2000 and 4000 for shaping the cutting edge (Kunsuto), and the Arkansas natural stone. The development process of the stones made in Germany was supported by microscope images of the cutting edges after sharpening. Pre-soaked with oil in the factory, it comes ready for use.</p> <p>Grit 2000</p> <p>Dimensions 200 x 50 x 25 mm</p> <p></p>

032.136

5/ 5

<p>Short jig, axe jig, knife jig, small knife holder, long slender knives jig, scissors jig. Comes in practical plastic box with hard foam inlay.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8</p> <p></p>

032.347

5/ 5

<p>Polishing emulsion with diamond particles for polishing or stropping knives and razors, as well as chisels or plane blades. Fits Jende Nanocloth acrylic strop block or leather honing strop block. To apply the emulsion, we recommend removing the pump cover, tipping the emulsion onto the strop block and spreading it evenly with a finger.</p> <p>Grit 2 Micron</p> <p></p>

032.270

5/ 5

<p>The gentle, highly pure aluminium oxideused for manufacturing this stone is much finer than the abrasives of other synthetic oilstones. Additionally, the stone is highly effective and does not clog too quickly. Pre-soaked with oil in the factory, it comes ready for use.</p> <p>Dimensions 203 x 51 x 25 mm</p> <p></p>

032.110

5/ 5

<p>Granite stone plate for use in combination with sandpaper for sharpening tool blades or trueing waterstones and oilstones. Anti-slip feet for added stability. Flatness tolerance ± 0.1 mm. Colour may vary.</p> <p>Dimensions 280 x 130 x 20 mm</p> <p></p>

032.226

5/ 5

<p>Maximum precision and solid zinc cast housing</p> <p>TORMEK T-8 Original takes precision and stability to a completely new level. The new design integrates the previously mounted sleeves for the vertical and horizontal support into the revolutionary fully cast top and frame. The enhanced stability optimizes jig guidance and thus the sharpening accuracy.</p> <p>The Tormek DC-250 Diamond Grinding Wheel with grit 360 achieves efficient removal and quickly repairs a blunt or damaged cutting edge. It is the ideal grinder for the turner and is particularly durable. The high quality of the diamond grinding surface ensures efficient, constant sharpening with a constant wheel diameter. With this set you also receive all relevant sharpening guides.</p> <p>Diamond grinding wheel ""Tormek DC-250"", grit 360, Ø 250 x 50 mm; leather honing wheel Ø 215 x 30 mm; universal support with fine adjustment (can be used horizontally or vertically). 230 V, 200 W, 90 rpm, torque 14.7 Nm, 14.8 kg.</p> <p>Includes:</p> <p>Square edge jig (SE-77)</p> <p>Adjustable trueing tool (TT-50) and stone grader (SP-650) for additional standard sharpening wheels (water stones)</p> <p>Anti-corrosion concentrate, 150 ml (ACC-150)</p> <p>Pro Angle Master (WM-200)</p> <p>Honing compound (PA-70)</p> <p>Handbook (HB-10)</p> <p>Instruction video (DVD-1)</p> <p>Woodturner's kit (TNT-808)</p> <p>Edge marker (EM-15)</p> <p>Comes with Tormek manual in German language.</p> <p>Tormek Sharpening System</p> <p>Proven for many years and constantly perfected wet working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.</p> <p>The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The offset front end can also be used for flat honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.</p> <p>A summary of the advantages of Tormek sharpening machines</p> <p>Longer working life of T-8 and T-4 Original:</p> <p>Stainless steel spindle with EzyLock-System for easier stone assembling</p> <p>Solid zinc cast housing with integrated vertical and horizontal support</p> <p>Better motor insulation</p> <p></p> <p>Additional advantages of T-8 Original:</p> <p>Electrophoretic dip painted casing, zinc cast housing frame and robust ABS plastic sides for better corrosion protection</p> <p>Silent running, maintenance free motor, designed for continuous operation, 25 000 hour life</p> <p>Improved water container with screw lift for easy positioning, overspill rim, drip-off plate, magnetic swarf collector and magnetic cleaning scraper</p> <p></p>

032.326

5/ 5

<p>Shaping stone with good sharpening qualities. Green silicon carbide abrasive.</p> <p>King/Sun Tiger</p> <p>Matsunaga is one of the largest manufacturers of sharpening stones in Japan. In the West, these stones are usually known as King stones or Sun Tiger stones. The stones of the King or Sun Tiger series have a relatively soft bond, which allows the abrasives to be continually exposed during use, making the stone highly effective. These stones are ideal for extremely hard, low-alloy carbon steels (White and Blue Paper Steel). Before use, soak the stones in water for at least 15 minutes. They can also be stored in water permanently. Green silicon carbide abrasive is used for 180 grit. For all other grits aluminium oxideis used.</p> <p>Grit 240</p> <p>Dimensions 205 x 75 x 50 mm</p> <p></p>

032.189

5/ 5

<p>Proven cleaning and polishing agent for all shiny metals (steel, stainless steel, aluminium, brass, copper, silver, gold, nickel, chromium etc.). Ideal for honing blades on leather, e.g. Tormek sharpening system, strops, etc. Non-toxic, acid- and formaldehyde-free.</p> <p>Content 100 ml</p> <p></p>

032.257

5/ 5

<p>Coarse corresponds to grit 220 and fine corresponds to grit 1000.</p> <p>The gentle, highly pure white aluminium oxideused for the manufacturing of this stone is much finer than the abrasives of other synthetic oilstones. Additionally the stone is highly effective and does not clog easily. Pre-soaked with oil in the factory, it comes ready for use.</p> <p>Grit fine/coarse</p> <p>Dimensions 203 x 51 x 25 mm</p> <p></p>

032.195

5/ 5

<p>Polishing emulsion with diamond particles for polishing or stropping knives and razors, as well as chisels or plane blades. Fits Jende Nanocloth acrylic strop block or leather honing strop block. To apply the emulsion, we recommend removing the pump cover, tipping the emulsion onto the strop block and spreading it evenly with a finger.</p> <p>Grit 4 Micron</p> <p></p>

032.276

5/ 5

<p>Thanks to the wide flat rest with adjustable angle, this system is suitable for scrapers and parting tools as well as chisels and plane blades. Includes a left and right base with eccentric locking mechanism, arm rest and flat rest. Flat rest 126 x 76 mm.</p> <p>The Oneway sharpening system was specially designed for woodturning tools but, with its two different jigs, is also suitable for chisels and plane blades as well as other tools. The arm is fitted to a double-wheeled grinder using a base system (fits all common models).</p> <p></p>

032.336

5/ 5

<p>For sharpening and honing.</p> <p>This stone features two different grit sizes. Abrasive: #1000 aluminium oxideand white aluminium oxide, # 3000 and 6000 white aluminium oxide.</p> <p>Kunsuto Sharpening Stone Series</p> <p>This stone series was developed in cooperation with a Japanese sharpening stone expert. The aim was to create a Japanese stone series suitable for both high-alloy tool steels and low-alloy carbon steels. The numerous tests were supported by microscopic images of the cutting edges after sharpening. This stone series has a medium-hard bond, which does not wear out quickly even with tool steels made of alloy components with a coarse grain structure (e.g. chromium and vanadium). However, both steel types allow good material removal with a pleasant ease of use. The microscopic images show a harmonious surface and a precise cutting edge form for both types of steel.</p> <p>Before use, soak the stone for at least 10 minutes. Do not keep it in water permanently.</p> <p></p> <p>Grit 1000/6000</p> <p>Dimensions 205 x 75 x 35 mm</p> <p></p>

032.390

5/ 5

<p>Belgian Coticule Whetstones</p> <p>The quarrying of Belgian whetstones in the Ardennes is first mentioned in a Roman document. But the story of these natural honing stones goes further back than that. The approx. 480 million-year-old grey yellow sedimentary stones, originating from volcanic ash, are composed of very fine garnet crystals. During honing, these are released from the matrix and, in combination with water and abrasion debris, make a honing paste. The garnets only remove fine shavings from the metal and ensure a good polish. Unique combination of quick abrasive action and grain size.</p> <p>Interesting fact: To produce 1 kg of sharpening stones approx. 1500 kg of cliff must be removed. The thin yellow slices are glued to a slate base and cut to size.</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p></p> <p>Grit 6000-8000</p> <p>Dimensions 33-39 cm²</p> <p></p>

032.402

5/ 5

032.414