Corrosion Inhibitor VCI Paper, 10 Sheets

5/ 5

<p>The underside of the vegetable-tanned cowhide is softer and therefore ideal for polishing light contours or serrations on tool and knife edges.</p> <p>Leather honing strop block for honing tool, knife and razor blades. After honing on benchstones, we recommend stropping on leather for ultra-sharp edges. Can be used with or without sharpening paste.</p> <p>Dimensions 210 x 70 x 20 mm</p> <p></p>

032.145

5/ 5

<p>Suitable for Tormek T-3, T-4 and old series models.</p> <p></p>

032.350

5/ 5

<p>Set of grits 800, 2000 and 5000. Ideal combination for knife and tool edges.</p> <p>With this series of stones, material can be removed more quickly thanks to the extremely high density of abrasive grains. Due to the hard magnesium bond, the stone also remains flat for a very long time - it is therefore ideally suited for kitchen knives and razors and all low-alloy carbon steels with high hardness (white and blue paper steel).</p> <p>Due to this bond, the stone reacts more sensitively to long-term exposure to water - therefore only water for a maximum of 5 minutes before use!</p> <p></p> <p>Grit 800, 2000, 5000</p> <p>Dimensions 210 x 70 x 20 mm</p> <p></p>

032.386

5/ 5

<p>Double-sided mini diamond plates for whetting, polishing and honing.</p> <p>Compact, light and flexible.</p> <p>For chamfering fret ends and levelling frets, especially on small plucked instruments, such as mandolins and ukuleles.</p> <p>100 x 30 x 1 mm</p> <p></p>

032.417

5/ 5

032.069

5/ 5

<p>Arkansas stones are available in different hardnesses on the market. They are called Soft, Hard, Hard Black, Surgical and Translucent and differ in grit size.</p> <p>Arkansas Oilstones</p> <p>Fine grained, extremely wear-resistant honing stones, for use with an oil lubricant. Due to their high degree of hardness, they are ideal for polishing curved cutting edges. The stones we offer have a uniform structure and are crack-free. They originate from quarries in the Ouachita Mountains in Arkansas (USA).</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p> </p> <p>Grit 6000-8000</p> <p>Dimensions 200 x 48 x 20 mm</p> <p></p>

032.085

5/ 5

<p>For the diamond stone dresser.</p> <p>Grinding jigs and accessories are suitable for all models (T-3, T-4, T-7 and T-8) unless otherwise noted.</p> <p></p>

032.028

5/ 5

<p>Clamp the blade in the guide and set the desired bevel angle using the angle jig. The sharpening is done on a bench stone. The wide roller assures stability and preserves the surface of the stone. The tappet screw allows honing to a second (micro) bevel without having to reclamp the blade. Set, honing guide and angle jig.</p> <p>Max. blade width 60 mm</p> <p>Max. blade thickness 15 mm</p> <p></p>

032.256

5/ 5

<p>This multifunctional deluxe set allows for the precise and easy sharpening of nearly all tool blades, whether they have straight or slightly rounded cutting edges, whether the blade width is 2 mm or 72 mm.</p> <p>The set includes:</p> <p>Standard clamping unit for cutting tool edges up to 72 mm width, also suited for blades with bevel or chamfered edges</p> <p>Double jaw clamp, suited for the narrowest chisels, mortise chisels or plane blades; the lateral clamping ensures precise perpendicular sharpening, especially for narrow blades with straight edges; max. blade width 38 mm</p> <p>Sharpening device with straight roller, suited for sharpening straight edges</p> <p>Sharpening device with barrel-shaped roller for sharpening and honing slight curves, e.g. for smoothing plane blades</p> <p>Setting gauge with fence for bevel angle 15°-54° (with double jaw honing device 15°-40°), counter chamfer 10°-20°</p> <p>The adjustable brass roller allows for increasing the angle of inclination by up to 2° when creating a micro bevel without unclamping the tool. Made of die-cast aluminium, easy-gliding brass roller.</p> <p></p> <p>Max. blade width 72 / 38 mm</p> <p>Max. blade thickness 12 mm</p> <p></p>

032.307

5/ 5

<p class="MsoNormal">NEW! Ultimate precision, solid zinc-cast top</p> <p class="MsoNormal">The TORMEK T-4 Original, an advanced version of the T-3 model, takes precision and stability to a new level. Both the vertical and horizontal bases for the universal support and the integrated carrying handle are made in the same zinc casting and therefore permanently joined together. The motor and main shaft are fixed to the cast top, resulting in a solid construction which significantly improves accuracy during sharpening.</p> <p class="MsoNormal">""Tormek Original"" sharpening wheel, grit 220, Ø 200 x 40 mm; leather honing wheel Ø 145 x 26 mm; solid zinc casting top with universal support with fine adjustment (horizontal and vertical settings). Impact-resistant ABS plastic housing. 230 V, 120 W, 120 rpm, 8 kg.</p> <p class="MsoNormal">Includes:</p> <p class="MsoNormal">Stone grader (SP-650)</p> <p class="MsoNormal">Pro Angle Master (WM-200)</p> <p class="MsoNormal">Honing compound (PA-70)</p> <p class="MsoNormal">Handbook (HB-10)</p> <p class="MsoNormal">Instruction video (DVD-1)</p> <p class="MsoNormal">Edge marker (EM-15)</p> <p class="MsoNormal">Voucher for free participation in a one-day workshop of your choice or a discount of €100 for a multi-day workshop</p> <p class="MsoNormal">Comes with Tormek manual in German language.</p> <p class="MsoNormal">Tormek Sharpening System</p> <p class="MsoNormal">Proven for many years and constantly perfected wet working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.</p> <p class="MsoNormal">The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The offset front end can also be used for flat honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.</p> <p class="MsoNormal">A summary of the advantages of Tormek sharpening machines</p> <p class="MsoNormal">Longer working life of T-8 and T-4 Original:</p> <p class="MsoNormal">Stainless steel spindle with EzyLock-System for easier stone assembling</p> <p class="MsoNormal">Solid zinc cast housing with integrated vertical and horizontal support</p> <p class="MsoNormal">Better motor insulation</p> <p class="MsoNormal"></p> <p class="MsoNormal">Additional advantages of T-8 Original:</p> <p class="MsoNormal">Electrophoretic dip painted casing, zinc cast housing frame and robust ABS plastic sides for better corrosion protection</p> <p class="MsoNormal">Silent running, maintenance free motor, designed for continuous operation, 25 000 hour life</p> <p class="MsoNormal">Improved water container with screw lift for easy positioning, overspill rim, drip-off plate, magnetic swarf collector and magnetic cleaning scraper</p> <p></p> <p></p>

032.007

5/ 5

<p>All metal parts made of stainless steel</p> <p>Anti-slip rubber clamping jaws</p> <p>Mid-mounted support bracket for thin stones</p> <p>Width 70 mm</p> <p>Jaw opening 135-220 mm</p> <p>Support height 23 mm</p> <p></p>

032.237

5/ 5

<p><span lang="en-us" style="font-size:11pt;line-height:107%;font-family:Calibri, 'sans-serif';" xml:lang="en-us">This large flattening (truing) stone is ideal for flattening the surface of sharpening stones that have become dished or have developed grooves. The flattening block comes with removable rubber feet to stop it from sliding around during the flattening process</span></p>

032.005

5/ 5

<p>Medium-grit lime sandstone from the Kumamoto region for general sharpening. Readily absorbs water, cuts well and easily produces a fine slurry.</p> <p>Japanese Natural Stones</p> <p>""A blade and sharpening stone must be as perfect a match as bride and groom"" according to legendary blacksmith, Shigeoshi Iwasaki. Finding the ideal pairing is no easy task in either case. Despite the excellent performance of synthetic stones, many experienced sharpeners still prefer natural stones for sharpening their finest blades. Japanese sharpening stones are particularly renowned for their effect to harmoniously sharpen hand-forged carbon steels. They can bring a blade’s full potential to the fore and allow the sharpening process itself to become a pleasant ritual. The finest stones from the Honyama quarries are becoming increasingly difficult to acquire - we take great pleasure in still being able to offer these rare treasures. Natural Japanese stones may only be used with water and must be kept protected from frost. Please note that the stones may have slight natural imperfections and may vary somewhat in size.</p> <p> </p> <p>Grit 800-1200</p> <p>Dimensions 220 x 60 x 62 mm</p> <p></p>

032.197

5/ 5

<p>Simply mix the non-acidic formulation with water and submerge your rusty tools. It will not attack wood, wooden materials and most synthetic substances. The formula is bio-degradable, 500 ml make up a solution of ten litres. After the initial rust has been removed, the tools are protected from further corrosion.</p> <p>Content 500 ml</p> <p></p>

032.304

5/ 5

<p>For sharpening and finishing.</p> <p>With two different grits. Comes with Nagura stone. For sharpening and finishing.</p> <p>Cerax by Suehiro</p> <p>Cerax is the best-known brand of the Suehiro company. The stones sold under this name have a medium-hard bond and are particularly suitable for high-alloy tool steels but also for low-alloy carbon steels. The coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly. The stone with the base has extra stability and is easy to store. A Nagura stone is used for cleaning and unclogging the surface of the stone and for creating a fine polishing paste. Before use, soak the stones in water for at least 10 minutes, but do not store them in water permanently. White aluminium oxideabrasive.</p> <p>Grit 1000/6000</p> <p>Dimensions 183 x 63 x 32 mm</p> <p>Base without base</p> <p></p>

032.369

5/ 5

<p>For turning tools (scrapers, scorps, inshaves), chisels, scraper blades etc. ""Torlock"" locking system.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p></p>

032.410