Naniwa Diamond Stone, Grit 400

5/ 5

<p>Polishing emulsion with diamond particles for polishing or stropping knives and razors, as well as chisels or plane blades. Fits Jende Nanocloth acrylic strop block or leather honing strop block. To apply the emulsion, we recommend removing the pump cover, tipping the emulsion onto the strop block and spreading it evenly with a finger.</p> <p>Grit 1 Micron</p> <p></p>

032.272

5/ 5

<p><span lang="en-us" style="font-size:11pt;line-height:107%;font-family:Calibri, 'sans-serif';" xml:lang="en-us">This large flattening (truing) stone is ideal for flattening the surface of sharpening stones that have become dished or have developed grooves. The flattening block comes with removable rubber feet to stop it from sliding around during the flattening process</span></p>

032.005

5/ 5

<p>For pre-sharpening and sharpening, this set contains a Sun Tiger 220/1000-grit combination stone. And for honing, a King 6000-grit honing stone. The stones rest securely on the included Non-skid mat and can be conveniently trued on the trueing grille. Also included is a King 8000-grit multiform stone No. 711203, for honing the inner face.</p> <p></p>

032.241

5/ 5

<p>For sharpening and honing.</p> <p>This stone features two different grit sizes. Abrasive: #1000 aluminium oxideand white aluminium oxide, # 3000 and 6000 white aluminium oxide.</p> <p>Kunsuto Sharpening Stone Series</p> <p>This stone series was developed in cooperation with a Japanese sharpening stone expert. The aim was to create a Japanese stone series suitable for both high-alloy tool steels and low-alloy carbon steels. The numerous tests were supported by microscopic images of the cutting edges after sharpening. This stone series has a medium-hard bond, which does not wear out quickly even with tool steels made of alloy components with a coarse grain structure (e.g. chromium and vanadium). However, both steel types allow good material removal with a pleasant ease of use. The microscopic images show a harmonious surface and a precise cutting edge form for both types of steel.</p> <p>Before use, soak the stone for at least 10 minutes. Do not keep it in water permanently.</p> <p></p> <p>Grit 1000/6000</p> <p>Dimensions 205 x 75 x 35 mm</p> <p></p>

032.390

5/ 5

<p>Sharpening the complex tip geometry of a drill by hand requires plenty of practice. Using the Tormek drill bit sharpener attachment, you can now sharpen a 4-facet drill bit with the usual wet working sharpening method on your drill for maximum precision and service life. The optimum point and clearance angles can be set for any drilling operation with regard to the size of the drill and the material to be worked on. Even drills which are completely blunt and have their tips broken off can be returned to the perfect shape through sharpening. Point angles 90-150°.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p>Ø 3-22 mm</p> <p></p>

032.021

5/ 5

<p>Arkansas stones are available in different hardnesses on the market. They are called Soft, Hard, Hard Black, Surgical and Translucent and differ in grit size.</p> <p>Arkansas Oilstones</p> <p>Fine grained, extremely wear-resistant honing stones, for use with an oil lubricant. Due to their high degree of hardness, they are ideal for polishing curved cutting edges. The stones we offer have a uniform structure and are crack-free. They originate from quarries in the Ouachita Mountains in Arkansas (USA).</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p></p> <p>Grit 400-600</p> <p>Dimensions 205 x 50 x 13 mm</p> <p></p>

032.080

5/ 5

032.069

5/ 5

<p>These wax-like polishing pastes are applied to felt buffing wheels and smooth leather sides of strops. Only for steel/stainless steel.</p> <p></p>

032.299

5/ 5

<p>For plane blades and paring chisels. Also suitable for Japanese chisels. Slightly convex cutting shapes can also be sharpened using two setting wheels (included with T-8).</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p></p>

032.009

5/ 5

<p>Arkansas stones are available in different hardnesses on the market. They are called Soft, Hard, Hard Black, Surgical, Translucent and differ in grit size. Supplied in a protective cover.</p> <p>Arkansas Oilstones</p> <p>Fine grained, extremely wear-resistant honing stones, for use with an oil lubricant. Due to their high degree of hardness, they are ideal for polishing curved cutting edges. The stones we offer have a uniform structure and are crack-free. They originate from quarries in the Ouachita Mountains in Arkansas (USA).</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p> </p> <p>Form knife-shaped</p> <p>Grit 8000-10 000</p> <p>Dimensions 100 x 50 x 9.5 mm</p> <p></p>

032.206

5/ 5

<p>Sharpens all makes and shapes of profile knifes. Also for profiled paint removal blades suitable for Tormek T-8, T-7, T-4, T-3 and old series models.</p> <p>For profile knifes with 24, 30 or 38 mm distance between guide holes. Not suitable for knives without guide holes.</p> <p></p>

032.408

5/ 5

<p>Solid sharpening stone holder, of hard rubber with tempered glass core for secure positioning. Fits Shapton sharpening stones.</p> <p>Dimensions 258 x 85 x 55 mm</p> <p></p>

032.196

5/ 5

<p>With concave and convex surfaces, for gouges. Approx. 145 x Ø 54 x Ø 14 mm. Grit 180: green silicon carbide abrasive.</p> <p>King/Sun Tiger</p> <p>Matsunaga is one of the largest manufacturers of sharpening stones in Japan. In the West, these stones are usually known as King stones or Sun Tiger stones. The stones of the King or Sun Tiger series have a relatively soft bond, which allows the abrasives to be continually exposed during use, making the stone highly effective. These stones are particularly suitable for extremely hard, low-alloy carbon steels (White and Blue Paper Steel). Before use, soak the stones in water for at least 15 minutes. They can also be stored in water permanently. Green silicon carbide abrasive is used for 180 grit. </p> <p></p> <p></p>

032.218

5/ 5

<p>This Japanese waterstone of aluminium oxidehas a hard bond and therefore does not wear quickly. Particularly suited for high-alloy tool steels. Before use, soak the stone in water for approx. 10 minutes. Do not keep it in water permanently.</p> <p>Grit 2000</p> <p>Dimensions 215 x 75 x 50 mm</p> <p></p>

032.160

5/ 5

<p>Maximum precision and solid zinc cast housing</p> <p>The TORMEK T-8 Original takes precision and stability to a completely new level. The new design integrates the previously mounted sleeves for the vertical and horizontal support into the revolutionary fully cast top and frame. The enhanced stability optimises jig guidance and thus the sharpening accuracy.</p> <p>The Tormek DE-250 diamond grinding wheel with a grit size of 1200 provides a very fine grinding surface and is ideal for carving tools, knives, chisels or plane blades. Thanks to the additional grinding surface on the side, a straight bevel can be ground into the tool without hollow grinding. For sharpening on the side of the diamond grinding wheel, we recommend the Tormek Multi Base (MB-100) with the appropriate sharpening device for the respective tool.</p> <p>Sharpening wheel ""Tormek DE-250"", grit 1200, Ø 250 x 50 mm; leather honing wheel Ø 215 x 30 mm; universal support with fine adjustment (can be used horizontally or vertically). 230 V, 200 W, 90 rpm, torque 14.7 Nm, 14.8 kg.</p> <p>Includes:</p> <p>Square Edge Jig (SE-77)</p> <p>Adjustable Trueing Tool (TT-50) and Stone Grader (SP-650) for purchasing additional standard sharpening wheels (water stones)</p> <p>Anti-corrosion Concentrate, 150 ml (ACC-150)</p> <p>Pro Angle Master (WM-200)</p> <p>Honing Compound (PA-70)</p> <p>Handbook (HB-10)</p> <p>Instruction Video (DVD-1)</p> <p>Edge marker (EM-15)</p> <p>Comes with Tormek manual in German language.</p> <p>Tormek Sharpening System</p> <p>Proven for many years and constantly perfected wet working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.</p> <p>The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The offset front end can also be used for flat honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.</p> <p>A summary of the advantages of Tormek sharpening machines</p> <p>Longer working life of T-8 and T-4 Original:</p> <p>Stainless steel spindle with EzyLock-System for easier stone assembling</p> <p>Solid zinc cast housing with integrated vertical and horizontal support</p> <p>Better motor insulation</p> <p></p> <p>Additional advantages of T-8 Original:</p> <p>Electrophoretic dip painted casing, zinc cast housing frame and robust ABS plastic sides for better corrosion protection</p> <p>Silent running, maintenance free motor, designed for continuous operation, 25 000 hour life</p> <p>Improved water container with screw lift for easy positioning, overspill rim, drip-off plate, magnetic swarf collector and magnetic cleaning scraper</p> <p></p>

032.325

5/ 5

<p>Versatile, light oil from the seeds of the camellia tree.</p> <p>Corrosion protection: Camellia oil is acid-free, non-volatile and not susceptible to resinification, making it the ideal oil to protect tools, knives and weapons from rust. Made from pure natural plant products and food safe, it is ideal for preserving kitchen knives made of carbon steel.</p> <p>Wood protection: When applied to wooden surfaces, it is absorbed quickly due to its low viscosity. Once absorbed, it helps protect the wood from damage by moisture, dirt and UV light. Clear, not discolouring, it emphasizes the wood's natural beauty. Non-hardening.</p> <p>Body care: Camellia oil makes an excellent base for the preparation of lotions, creams and soaps for cosmetic use. As a massage oil or hair oil, it has for ages been found irreplaceable by Japanese geishas.</p> <p></p>

032.250