Sharpening Set for Sculptor’s Gouges

5/ 5

<p>This sharpening stone is thicker than the standard version with a longer service life. Comes with plastic case.</p> <p>Glass Stones by Shapton</p> <p>The premium range from Japanese company Shapton is the ""Glass Stone"" series. The sharpening particles are highly pure and homogeneous. This is noticeable when changing to finer grits: the traces from the previous grit are quickly ground out. A special bond allows quick sharpening on a flat surface. The sharpening stone has a base of tempered glass and is thus 100 % warp-free. Conventional sharpening stones may warp microscopically by absorbing water, but Shapton stones solve this problem with their extremely flat base of tempered glass.</p> <p>Another advantage of the glass base is that the grit rating on the underside is always visible even after much use. Before use, spray the stones with water. It is not recommended to keep them in water permanently. White aluminium oxideabrasive.</p> <p> </p> <p>Grit 500</p> <p>Dimensions 210 x 70 x 15 mm</p> <p>Abrasive thickness 10 mm</p> <p></p>

032.111

5/ 5

<p>All metal parts made of stainless steel</p> <p>Non-slip rubber clamping jaws</p> <p>Mid-mounted support bracket for thin stones</p> <p>Extra-large rest area</p> <p>High rest for more free space when sharpening</p> <p>Width 75 mm</p> <p>Jaw opening 135-220 mm</p> <p>Support height 32 mm</p> <p></p>

032.070

5/ 5

<p>Medium-coarse grit lime sandstone, very open texture, with good honing properties. From the Amakusa region.</p> <p>Japanese Natural Stones</p> <p>""A blade and sharpening stone must be as perfect a match as bride and groom"" according to legendary blacksmith, Shigeoshi Iwasaki. Finding the ideal pairing is no easy task in either case. Despite the excellent performance of synthetic stones, many experienced sharpeners still prefer natural stones for sharpening their finest blades. Japanese sharpening stones are particularly renowned for their effect to harmoniously sharpen hand-forged carbon steels. They can bring a blade’s full potential to the fore and allow the sharpening process itself to become a pleasant ritual. The finest stones from the Honyama quarries are becoming increasingly difficult to acquire - we take great pleasure in still being able to offer these rare treasures. Natural Japanese stones may only be used with water and must be kept protected from frost. Please note that the stones may have slight natural imperfections and may vary somewhat in size.</p> <p></p> <p>Grit 400-800</p> <p>Dimensions: 150 x 45 x 30 mm medium</p> <p>                   220 x 60 x 70 mm large</p>

032.199

5/ 5

<p>Arkansas stones are available in different hardnesses on the market. They are called Soft, Hard, Hard Black, Surgical, Translucent and differ in grit size. Supplied in a protective cover.</p> <p>Arkansas Oilstones</p> <p>Fine grained, extremely wear-resistant honing stones, for use with an oil lubricant. Due to their high degree of hardness, they are ideal for polishing curved cutting edges. The stones we offer have a uniform structure and are crack-free. They originate from quarries in the Ouachita Mountains in Arkansas (USA).</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p> </p> <p>Form knife-shaped</p> <p>Grit 8000-10 000</p> <p>Dimensions 100 x 50 x 9.5 mm</p> <p></p>

032.206

5/ 5

<p>Delivery without content.</p> <p>250 ccm.</p> <p></p>

032.297

5/ 5

<p>For de-burring the mirror side of chisels after sharpening. Self-adhesive. Fits No. 740830.</p> <p>M. Power Tools DC Diamond Stones</p> <p>Diamond Cross (DC) sharpening stones offer an excellent price/performance ratio with a high manufacturing quality. The lapping of the supporting plates and the stringent quality controls are performed at the company's headquarters in England.</p> <p>Monocrystalline* diamond particles guarantee a long service life and excellent material removal</p> <p>Uniform grit sizes and a dense diamond distribution for even grinding patterns</p> <p>Cross-shaped recesses prevent clogging due to grinding debris</p> <p>Permanently flat and warp-free thanks to specially lapped supporting plates made of steel with a stainless steel matrix</p> <p>3 year warranty for material and manufacturing defects! (damage from improper use is not covered by this warranty)</p> <p>Monocrystalline* diamond-coated sharpening devices:</p> <p>Diamond-coated sharpening devices remain permanently flat, and are especially suitable for tools with straight blades, as well as for producing flat surfaces (e.g. backs of plane and chisel blades, plane soles, scrapers). Also suitable for carbide coated cutters, tool steels, HSS and non-metal materials (glass, ceramic, etc.). We recommend moistening diamond-coated sharpening devices with water and grinding with little pressure.</p> <p>* Monocrystalline diamonds are significantly more wear resistant than the polycrystalline diamonds used to make lower quality diamond sharpening tools.</p> <p>Grit:  extra-fine</p> <p></p>

032.357

5/ 5

<p>Belgian Coticule Whetstones</p> <p>The quarrying of Belgian whetstones in the Ardennes is first mentioned in a Roman document. But the story of these natural honing stones goes further back than that. The approx. 480 million-year-old grey yellow sedimentary stones, originating from volcanic ash, are composed of very fine garnet crystals. During honing, these are released from the matrix and, in combination with water and abrasion debris, make a honing paste. The garnets only remove fine shavings from the metal and ensure a good polish. Unique combination of quick abrasive action and grain size.</p> <p>Interesting fact: To produce 1 kg of sharpening stones approx. 1500 kg of cliff must be removed. The thin yellow slices are glued to a slate base and cut to size.</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p></p> <p>Grit 6000-8000</p> <p>Dimensions 150 x 40 x 20 mm</p> <p></p>

032.405

5/ 5

<p>Hibiki Stone by Naniwa</p> <p>This stone series is especially suitable for sharpening tool blades as well as for honing the back, e.g. on chisels or plane blades. Thanks to its particularly hard bond, the stone remains flat for a longer time. These stones are ideal for extremely hard, low-alloy carbon steels (White and Blue Paper Steel). Before use, soak the stones in water for at least 10 minutes. It is not recommended to keep them in water permanently.</p> <p>Grit 3000</p> <p>Dimensions 206 x 70 x 20 mm</p> <p></p>

032.129

5/ 5

<p>Fine-grit waterstones for removing burr, polishing and honing. Comes with Nagura stone.</p> <p>Cerax by Suehiro</p> <p>Cerax is the best-known brand of the Suehiro company. The stones sold under this name have a medium-hard bond and are particularly suitable for high-alloy tool steels but also for low-alloy carbon steels. The coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly. The stone with the base has extra stability and is easy to store. A Nagura stone is used for cleaning and unclogging the surface of the stone and for creating a fine polishing paste. Before use, soak the stones in water for at least 10 minutes, but do not store them in water permanently. White aluminium oxideabrasive.</p> <p>Dimensions 206 x 73 x 23 mm</p> <p>Base without base</p> <p></p>

032.367

5/ 5

<p>With concave and convex surfaces, for gouges. Approx. 145 x Ø 54 x Ø 14 mm. Aluminium oxideabrasive. </p> <p>Matsunaga is one of the largest manufacturers of sharpening stones in Japan. In the West, these stones are usually known as King stones or Sun Tiger stones. The stones of the King or Sun Tiger series have a relatively soft bond, which allows the abrasives to be continually exposed during use, making the stone highly effective. These stones are particularly suitable for extremely hard, low-alloy carbon steels (White and Blue Paper Steel). Before use, soak the stones in water for at least 15 minutes. They can also be stored in water permanently. Aluminium oxideis used.</p> <p></p>

032.219

5/ 5

<p>Maximum precision and solid zinc cast housing</p> <p>TORMEK T-8 Original takes precision and stability to a completely new level. The new design integrates the previously mounted sleeves for the vertical and horizontal support into the revolutionary fully cast top and frame. The enhanced stability optimizes jig guidance and thus the sharpening accuracy.</p> <p>The Tormek DC-250 Diamond Grinding Wheel with grit 360 achieves efficient removal and quickly repairs a blunt or damaged cutting edge. It is the ideal grinder for the turner and is particularly durable. The high quality of the diamond grinding surface ensures efficient, constant sharpening with a constant wheel diameter. With this set you also receive all relevant sharpening guides.</p> <p>Diamond grinding wheel ""Tormek DC-250"", grit 360, Ø 250 x 50 mm; leather honing wheel Ø 215 x 30 mm; universal support with fine adjustment (can be used horizontally or vertically). 230 V, 200 W, 90 rpm, torque 14.7 Nm, 14.8 kg.</p> <p>Includes:</p> <p>Square edge jig (SE-77)</p> <p>Adjustable trueing tool (TT-50) and stone grader (SP-650) for additional standard sharpening wheels (water stones)</p> <p>Anti-corrosion concentrate, 150 ml (ACC-150)</p> <p>Pro Angle Master (WM-200)</p> <p>Honing compound (PA-70)</p> <p>Handbook (HB-10)</p> <p>Instruction video (DVD-1)</p> <p>Woodturner's kit (TNT-808)</p> <p>Edge marker (EM-15)</p> <p>Comes with Tormek manual in German language.</p> <p>Tormek Sharpening System</p> <p>Proven for many years and constantly perfected wet working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.</p> <p>The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The offset front end can also be used for flat honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.</p> <p>A summary of the advantages of Tormek sharpening machines</p> <p>Longer working life of T-8 and T-4 Original:</p> <p>Stainless steel spindle with EzyLock-System for easier stone assembling</p> <p>Solid zinc cast housing with integrated vertical and horizontal support</p> <p>Better motor insulation</p> <p></p> <p>Additional advantages of T-8 Original:</p> <p>Electrophoretic dip painted casing, zinc cast housing frame and robust ABS plastic sides for better corrosion protection</p> <p>Silent running, maintenance free motor, designed for continuous operation, 25 000 hour life</p> <p>Improved water container with screw lift for easy positioning, overspill rim, drip-off plate, magnetic swarf collector and magnetic cleaning scraper</p> <p></p>

032.326

5/ 5

<p>Ballistol provides reliable rust protection, cleans and oils metals, impregnates and preserves leather and wood surfaces, and is even suitable for the disinfection of minor cuts. In the garden it can be used to treat tree cancer and to combat aphids (in a 3 % solution with water). Ballistol is based on pure medical white oil, spiked with natural plant products. It is thus ecologically-friendly and bio-degradable.</p> <p>Content 500 ml</p> <p>Container Storage container</p> <p></p>

032.317

5/ 5

<p>Double grinder with 3000 rpm for universal metalworking. Whether for grinding, sharpening, deburring or polishing metal components - equipped with the right grinding wheels, the high-speed machine does the job, from shaping to polishing. rinding wheels corundum and white aluminium oxide.</p> <p>Scope of delivery</p> <p></p> <p>Protective goggles</p> <p>Diamond dresser</p> <p>White aluminium oxidewheel 150 x 25 x 12.7 mm, grit 100</p> <p>Corundum wheel 150 x 25 x 12.7 mm, grit 60</p> <p>Spark protection left and right</p> <p>Protective washers with retaining bracket left and right</p> <p>Workpiece support left and right</p> <p>Tub</p> <p>Open-end spanner</p> <p></p> <p>Centre hole 12.7 mm</p> <p>Wheel diameter 150 mm</p> <p>No load speed 2850 1/min</p> <p>Rated input 370 W</p> <p>Motor 230 V / 50 Hz</p> <p>Wheel width 25 mm</p> <p>Weight 10 kg</p> <p>Dimensions 360 x 240 x 185 mm</p> <p></p>

032.319

5/ 5

<p>This sharpening stone series is suitable for extremely hard cutting steels or sharpening tasks that require an absolutely flat sharpening stone.</p> <p>Sharpening of PM steels with a hardness of around 65 HRC</p> <p>Sharpening of ceramic knife blades</p> <p>Sharpening of razors</p> <p>Sharpening the back of hairdressing scissors</p> <p>The abrasive surface consists of bonded industrial diamonds and will therefore not show signs of wear, even when used frequently. Regular dressing and wetting as with waterstones is not necessary. Simply moisten with water and get started. Comes with cleaning stone.</p> <p>Grit 400</p> <p>Dimensions 210 x 75 x 16 mm</p> <p></p>

032.374

5/ 5

<p>Arkansas stones are available in different hardnesses on the market. They are called Soft, Hard, Hard Black, Surgical, Translucent and differ in grit size. Supplied in a protective cover.</p> <p>Arkansas Oilstones</p> <p>Fine grained, extremely wear-resistant honing stones, for use with an oil lubricant. Due to their high degree of hardness, they are ideal for polishing curved cutting edges. The stones we offer have a uniform structure and are crack-free. They originate from quarries in the Ouachita Mountains in Arkansas (USA).</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p></p> <p>Form knife-shaped</p> <p>Grit 800-1000</p> <p>Dimensions 100 x 50 x 9.5 mm</p> <p></p>

032.204

5/ 5

<p>Vegetable-tanned kangaroo leather is softer and therefore more flexible, which is ideal for sharpening razor cutting edges.</p> <p>Leather honing strop block for honing tool, knife and razor blades. After honing on benchstones, we recommend stropping on leather for ultra-sharp edges. Can be used with or without sharpening paste.</p> <p>Dimensions 210 x 70 x 20 mm</p> <p></p>

032.144