Jende Leather Honing Strop Block, Kangaroo Leather

5/ 5

<p>Ideal for trueing and for the sharpening of cutting tools. Includes two stone holders to screw onto the sharpening table, cleaning block, 30 ml lapping fluid, leather honing strop block for covering the stone, polishing wax and a storage case.</p> <p>M. Power Tools DC Diamond Stones</p> <p>Diamond Cross (DC) sharpening stones offer an excellent price/performance ratio with a high manufacturing quality. The lapping of the supporting plates and the stringent quality controls are performed at the company's headquarters in England.</p> <p>Monocrystalline* diamond particles guarantee a long service life and excellent material removal</p> <p>Uniform grit sizes and a dense diamond distribution for even grinding patterns</p> <p>Wave-shaped recesses prevent clogging due to grinding debris</p> <p>Permanently flat and warp-free thanks to specially lapped supporting plates made of steel with a stainless steel matrix</p> <p>Monocrystalline* diamond-coated sharpening devices:</p> <p>Diamond-coated sharpening devices remain permanently flat, and are especially suitable for tools with straight blades, as well as for producing flat surfaces (e.g. backs of plane and chisel blades, plane soles, scrapers). Also suitable for carbide coated cutters, tool steels, HSS and non-metal materials (glass, ceramic, etc.). We recommend moistening diamond-coated sharpening devices with water and grinding with little pressure.</p> <p>* Monocrystalline diamonds are significantly more wear resistant than the polycrystalline diamonds used to make lower quality diamond sharpening tools.</p> <p> </p> <p>Dimensions 202 x 70 x 11 mm</p> <p></p> <p></p>

032.153

5/ 5

<p>Fine-grit waterstones for removing burr, polishing and honing. Comes with Nagura stone.</p> <p>Cerax by Suehiro</p> <p>Cerax is the best-known brand of the Suehiro company. The stones sold under this name have a medium-hard bond and are particularly suitable for high-alloy tool steels but also for low-alloy carbon steels. The coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly. The stone with the base has extra stability and is easy to store. A Nagura stone is used for cleaning and unclogging the surface of the stone and for creating a fine polishing paste. Before use, soak the stones in water for at least 10 minutes, but do not store them in water permanently. White aluminium oxideabrasive.</p> <p>Dimensions 206 x 73 x 23 mm</p> <p>Base without base</p> <p></p>

032.367

5/ 5

<p>Questo set comprende un blocco di affilatura DMT per la preaffilatura grossolana della lama in caso di microfratture e per rettificare la pietra. Inclusa nel set anche una pietra combinata Konsuto 1000/6000 per affilare e lappare nonché tappetino antiscivolo per l’affilatura e la lappatura e una guida a due griffe per l’affilatura con angolatura precisa</p> <p></p>

032.243

5/ 5

<p>Very fine Japanese natural sharpening stone that is cultivated on the seabed (region Tsushima-Nagasaki). This natural sharpening stone cuts well and produces very little slurry. Also suitable for cleaning the structure of sharpening stones and creating a fine polishing paste. Do not keep it in water permanently.</p> <p>Japanese Natural Stones</p> <p>""A blade and sharpening stone must be as perfect a match as bride and groom"" according to legendary blacksmith, Shigeoshi Iwasaki. Finding the ideal pairing is no easy task in either case. Despite the excellent performance of synthetic stones, many experienced sharpeners still prefer natural stones for sharpening their finest blades. Japanese sharpening stones are particularly renowned for their ability to harmoniously sharpen hand-forged carbon steels. They can bring a blade’s full potential to the fore and allow the sharpening process itself to become a pleasant ritual. The finest stones from the Honyama quarries are becoming increasingly difficult to acquire - we take great pleasure in still being able to offer these rare treasures. Natural Japanese stones may only be used with water and must be kept protected from frost. Please note that the stones may have slight natural imperfections and may vary somewhat in size.</p> <p> </p> <p>Grit 3000-5000</p> <p>Dimensions 180 x 55 x 50 mm</p> <p></p>

032.112

5/ 5

<p>White aluminium oxideabrasive.</p> <p>Thanks to its concave and convex form, this stone is ideal for sharpening and honing garden shears.</p> <p>Goken Stone by Naniwa</p> <p>This stone has a relatively hard bond. It is particularly suitable for high-alloy steels but also for low-alloy carbon steels. The coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly. The stones should be soaked in water for at least 10 minutes before use, but must not be stored in water permanently.</p> <p>Dimensions 133 x 28 x 20 mm</p> <p></p>

032.376

5/ 5

<p>The Super Stone S1 is equivalent to the Super Stone S2. The different name is merely due to the smaller abrasive thickness of 10 mm. This stone series therefore is a reasonably-priced alternative for sharpening jobs where only small material removal is needed, e.g. the sharpening of razors.</p> <p>Super Stone by Naniwa</p> <p>This sharpening stone series is particularly suitable for the final polishing of knife blades. The stones provide a high polishing effect and stay flat for a long time, even though it feels as comfortable as working on soft natural stones. Those series are ideal for sharpening extremely hard low-alloy carbon steels(White and Blue Paper Steel). Before use, soak the stone for at least 10 minutes. Do not keep it in water permanently. White aluminium oxideabrasive.</p> <p>Dimensions 210 x 70 x 10 mm</p> <p></p>

032.174

5/ 5

<p>This adapter extends the clamping height of the Veritas Sharpening System II for clamping mortise chisels with up to 18 mm blade thickness. By opening the brass screw on the top of the sharpening aid, you can insert the adapter and fasten it with the same screw. Fits Veritas Sharpening System II with Narrow Blade Honing Guide </p> <p></p>

032.260

5/ 5

<p>With this high-quality sharpening stone holder with non-slip rubber feet, you always have a clean and stable workstation - in the sink or on the work table. The stainless steel sharpening stone holder fits a sink width of 330 - 580 mm. Please note the shape and size of your sink before you buy. Clamping jaws for fixing the sharpening stones have a height of 15 mm.</p> <p>Width 135 mm</p> <p>Jaw opening 172-268 mm</p> <p></p>

032.225

5/ 5

<p>Fits models 2000 - 2006 and T7. </p> <p></p>

032.412

5/ 5

<p>Empty plastic bottle, for easy application of camellia oil. Refill bottle 100 ccm.</p> <p></p>

032.291

5/ 5

<p>Ideal combination for sharpening knives and cutting-tool edges. Grits 800, 2000 and 5000.</p> <p>Super Stone by Naniwa</p> <p>This sharpening stone series is particularly suitable for the final polishing of knife blades. The stones provide a high polishing effect and stay flat for a long time, even though it feels as comfortable as working on soft natural stones. Those series are ideal for sharpening extremely hard low-alloy carbon steels(White and Blue Paper Steel). Before use, soak the stone for at least 10 minutes. Do not keep it in water permanently. White aluminium oxideabrasive.</p> <p>Grit 800, 2000, 5000</p> <p>Dimensions 210 x 70 x 20 mm</p>

032.387

5/ 5

<p>Maximum precision and solid zinc cast housing</p> <p>TORMEK T-8 Original takes precision and stability to a completely new level. The new design integrates the previously mounted sleeves for the vertical and horizontal support into the revolutionary fully cast top and frame. The enhanced stability optimizes jig guidance and thus the sharpening accuracy.</p> <p>""Tormek Original"" sharpening stone (SG-250) aluminium oxideØ 250 x 50 mm, grit 220; leather honing wheel Ø 220 x 30 mm; universal support, finely adjustable (can be used horizontally or vertically). 230 V, 200 W, 90 rpm, torque 14.7 Nm, 14.8 kg.</p> <p>Includes:</p> <p>Hand Tool Kit HTK-806 with short jig, axe jig, knife jig, small knife holder, long knives jig, scissors jig</p> <p>Square edge precision jig (SE-77)</p> <p>Adjustable trueing tool (TT-50)</p> <p>Stone preparer (SP-650)</p> <p>Angle gauge (WM-200)</p> <p>Honing compound (PA-70)</p> <p>Handbook (HB-10)</p> <p>Instruction video (DVD-1)</p> <p>Workshop ""Sharpening on the Tormek""</p> <p>Edge marker (EM-15)</p> <p>Comes with Tormek manual in German language.</p> <p>Tormek Sharpening System</p> <p>Proven for many years and constantly perfected wet working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.</p> <p>The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The offset front end can also be used for flat honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.</p> <p>A summary of the advantages of Tormek sharpening machines</p> <p>Longer working life of T-8 and T-4 Original:</p> <p>Stainless steel spindle with EzyLock-System for easier stone assembling</p> <p>Solid zinc cast housing with integrated vertical and horizontal support</p> <p>Better motor insulation</p> <p></p> <p>Additional advantages of T-8 Original:</p> <p>Electrophoretic dip painted casing, zinc cast housing frame and robust ABS plastic sides for better corrosion protection</p> <p>Silent running, maintenance free motor, designed for continuous operation, 25 000 hour life</p> <p>Improved water container with screw lift for easy positioning, overspill rim, drip-off plate, magnetic swarf collector and magnetic cleaning scraper</p> <p></p>

032.324

5/ 5

<p>These strops can be used with or without paste to polish tool blades. If necessary, you can use finishing paste on the black (rougher) side; the fine brown side is usually used for stropping without paste. Can be held by the handle or screwed to a worktop through the two holes.</p> <p>Dimensions 415 x 75 x 18 mm</p> <p></p>

032.294

5/ 5

<p class="MsoNormal"><span lang="en-us" xml:lang="en-us">Aluminium oxide abrasive.</span></p> <p></p> <p><span lang="en-us" style="font-size:11pt;line-height:107%;font-family:Calibri, 'sans-serif';" xml:lang="en-us">Matsunaga is one of the largest manufacturers of sharpening stones in Japan. These stones are usually known as King stones or Sun Tiger stones. The stones of the King or Sun Tiger series have a relatively soft bond, which allows the abrasives to be constantly exposed during use, making the stone highly effective. These stones are especially suitable for extremely hard, low-alloy carbon steels (White and Blue Paper Steel). Before use, soak the stones in water for at least 15 minutes. They can also be stored in water permanently.</span></p>

032.002

5/ 5

<p>Maximum precision and solid zinc cast housing</p> <p>TORMEK T-8 Original takes precision and stability to a completely new level. The new design integrates the previously mounted sleeves for the vertical and horizontal support into the revolutionary fully cast top and frame. The enhanced stability optimizes jig guidance and thus the sharpening accuracy.</p> <p>The Tormek DC-250 Diamond Grinding Wheel with grit 360 achieves efficient removal and quickly repairs a blunt or damaged cutting edge. It is the ideal grinder for the turner and is particularly durable. The high quality of the diamond grinding surface ensures efficient, constant sharpening with a constant wheel diameter. With this set you also receive all relevant sharpening guides.</p> <p>Diamond grinding wheel ""Tormek DC-250"", grit 360, Ø 250 x 50 mm; leather honing wheel Ø 215 x 30 mm; universal support with fine adjustment (can be used horizontally or vertically). 230 V, 200 W, 90 rpm, torque 14.7 Nm, 14.8 kg.</p> <p>Includes:</p> <p>Square edge jig (SE-77)</p> <p>Adjustable trueing tool (TT-50) and stone grader (SP-650) for additional standard sharpening wheels (water stones)</p> <p>Anti-corrosion concentrate, 150 ml (ACC-150)</p> <p>Pro Angle Master (WM-200)</p> <p>Honing compound (PA-70)</p> <p>Handbook (HB-10)</p> <p>Instruction video (DVD-1)</p> <p>Woodturner's kit (TNT-808)</p> <p>Edge marker (EM-15)</p> <p>Comes with Tormek manual in German language.</p> <p>Tormek Sharpening System</p> <p>Proven for many years and constantly perfected wet working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.</p> <p>The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The offset front end can also be used for flat honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.</p> <p>A summary of the advantages of Tormek sharpening machines</p> <p>Longer working life of T-8 and T-4 Original:</p> <p>Stainless steel spindle with EzyLock-System for easier stone assembling</p> <p>Solid zinc cast housing with integrated vertical and horizontal support</p> <p>Better motor insulation</p> <p></p> <p>Additional advantages of T-8 Original:</p> <p>Electrophoretic dip painted casing, zinc cast housing frame and robust ABS plastic sides for better corrosion protection</p> <p>Silent running, maintenance free motor, designed for continuous operation, 25 000 hour life</p> <p>Improved water container with screw lift for easy positioning, overspill rim, drip-off plate, magnetic swarf collector and magnetic cleaning scraper</p> <p></p>

032.326

5/ 5

<p>All metal parts made of stainless steel</p> <p>Anti-slip rubber clamping jaws</p> <p>Mid-mounted support bracket for thin stones</p> <p>Width 70 mm</p> <p>Jaw opening 135-220 mm</p> <p>Support height 23 mm</p> <p></p>

032.237