Ballistol Quick Burnishing Oil Ballistol Sharpening
  • Ballistol Quick Burnishing Oil Ballistol Sharpening

Ballistol Quick Burnishing Oil

,
5/ 5
<p>Ideal for accurately burnishing knife backs or other metal components, as well as repairing existing burnishings, e.g. on rifle shafts.Burnishing creates a protective layer (patina) on a ferrous surface to protect against rust.</p> <p>Burnishing is a means of corrosion protection. In contrast to other techniques, no additional layer is applied to the metal during burnishing, rather an anti-corrosive, mixed oxide layer of FeO and Fe2O3 is created on the surface. During the burnishing process, the colour of the surface changes to black or dark blue.</p> <p>In order to achieve an even surface finish, the metal must first be treated with a degreaser and possibly also with fine steel wool (grit 00). Afterwards, the actual burnishing process can be started at a temperature of 20-30 °C. The finished workpiece should then be oiled overnight to stabilise the burnish.</p> <p></p>
032.254
Ballistol Quick Burnishing Oil Ballistol Sharpening
€13.03

By buying this product you can collect up to 26 point points. Your cart will total 26 points that can be converted into a voucher of €0.26.

Shipping in 7-10 days
Quantity

Ideal for accurately burnishing knife backs or other metal components, as well as repairing existing burnishings, e.g. on rifle shafts.Burnishing creates a protective layer (patina) on a ferrous surface to protect against rust.

Burnishing is a means of corrosion protection. In contrast to other techniques, no additional layer is applied to the metal during burnishing, rather an anti-corrosive, mixed oxide layer of FeO and Fe2O3 is created on the surface. During the burnishing process, the colour of the surface changes to black or dark blue.

In order to achieve an even surface finish, the metal must first be treated with a degreaser and possibly also with fine steel wool (grit 00). Afterwards, the actual burnishing process can be started at a temperature of 20-30 °C. The finished workpiece should then be oiled overnight to stabilise the burnish.

032.254

16 other products in the same category: