Tools for Musical Instruments

5/ 5

<p>Polyurethane clamping pads with brass-reinforced bushings. Gunmetal-finished spindles with quick-acting brass thumbscrews for easy adjustment.</p> <p>Herdim Assembly Clamps</p> <p>Made in Germany</p> <p>The finest screw clamps available for assembling and repairing sensitive antique instruments as well as assembling new instruments. The clamping pads apply pressure directly over the instrument's ribs to prevent damage to the edges of the top and back. The clamps can be set with an accuracy which significantly reduces clamping pressure compared to conventional clamps. The toxin-free plastic repels glue, is resistant to wear and flexible to prevent marking the surfaces of the instrument. The pads slide along grooves in the length of the spindles to allow quick adjustment of the clamp. The reversible upper pads allow the clamps to be also used for gluing the ribs to the back of the instrument.</p> <p>Jaw opening 30-60 mm</p> <p></p> <p></p>

030.219

5/ 5

<p>Polyurethane clamping pads with brass-reinforced bushings. Gunmetal-finished spindles with quick-acting brass thumbscrews for easy adjustment.</p> <p>Herdim Assembly Clamps</p> <p>Made in Germany</p> <p>The finest screw clamps available for assembling and repairing sensitive antique instruments as well as assembling new instruments. The clamping pads apply pressure directly over the instrument's ribs to prevent damage to the edges of the top and back. The clamps can be set with an accuracy which significantly reduces clamping pressure compared to conventional clamps. The toxin-free plastic repels glue, is resistant to wear and flexible to prevent marking the surfaces of the instrument. The pads slide along grooves in the length of the spindles to allow quick adjustment of the clamp. The reversible upper pads allow the clamps to be also used for gluing the ribs to the back of the instrument.</p> <p>Jaw opening 30-60 mm</p> <p></p> <p></p>

030.218

5/ 5

<p>Pin-Head Type E</p> <p>For use in delicate positions due to the small diameter ball pin.</p> <p>For measuring the wall thickness of musical instruments, claddings, hollow bodies and veneers etc. Robust cast-aluminium frame with precision dial gauge. Measuring range is 30 mm, display accuracy is 0.1 mm. A left-handed version is available on request.</p> <p></p>

028.236

5/ 5

<p>For marking thickness contour lines on the tops and backs of stringed instruments. Aluminum arms, adjustable depth stop with spring-loaded pencil tip.</p> <p>Opening 60 mm</p> <p>Jaw depth 230 mm</p> <p></p>

028.235

5/ 5

028.234

5/ 5

<p>Light and versatile calliper for easy shop measurements of plate-edge thicknesses in range of 0-20 mm with 0.1 mm step.</p> <p>Jaw depth 15 mm</p> <p>Measurement range 0-20 mm</p> <p></p>

028.233

5/ 5

<p>MAG-ic Probe WiFi Thickness Caliper</p> <p>A device for measuring thickness, can be operated by computer (Windows or Mac). Very easy operation with very reliable results. Downloadable software for thickness map creation, range 0-15 mm. Metric or inch units. Driver download, hints and descriptions for use at www.magicprobe.net.</p> <p>Measurement range 0-15 mm</p> <p></p>

028.232

5/ 5

<p>Body 50 x 25 mm</p> <p>Concave arched sole with a precise radius R50 for cello and bass enable to shape and chamfer the fingerboard effectively and precisely. HSS blades with outstanding durability on ebony.</p> <p>Body 84 x 32 mm</p> <p>For Cello, Bass</p> <p>Herdim Finger Planes - The Original</p> <p>Our Herdim planes have been developed together with violin makers. Materials and its function are under constant improvement process.</p> <p>Slight side faces to work close to the edge, thick sole, which can be worked if required. Brass body and high quality HSS blade, hardened to approx. 60 HRC.</p> <p></p> <p>Weight 270 g</p> <p>Blade width 23 mm</p> <p>Base concave arched</p> <p></p>

023.132

5/ 5

<p>This is a better version of the Kunz 100: better materials, screw and a better blade!</p> <p>With a tongue-shaped handle.</p> <p>Body 85 x 32</p> <p>Blade width 24</p> <p>Blade thickness 2.5 mm</p> <p>The Stanley company produced the No. 101 block plane between 1877 and 1962. The tool enjoyed great popularity among musical instrument and fine furniture makers due to its small size and excellent function. The Herdim No. 101 reproduction is based on that classic, is however fitted with a thicker blade to improve performance. The thicker walls of the brass body give the plane the necessary heft even when performing detail work, make it very comfortable to use and avoids rust spots on the workpiece.</p> <p>Herdim Finger Planes - The Original</p> <p>Our Herdim planes have been developed together with violin makers. Materials and its function are under constant improvement process.</p> <p>Slight side faces to work close to the edge, thick sole, which can be worked if required. Brass body and high quality HSS blade, hardened to approx. 60 HRC.</p> <p></p> <p>Weight 230 g</p> <p>Blade width 24 mm</p> <p></p>

023.131

5/ 5

<p>For regluing rib corners. After attaching the clamp to the rib corner area, pressure can be applied directly to both sides of the rib corner using the small perpendicular spindles.</p> <p></p> <p>Jaw opening 50 mm (violin/viola), 150 mm (cello)</p> <p></p>

030.222

5/ 5

<p>Easy and fast fret polishing tool which is useful to erase scratches, sanding marks or rust. Because of its softness, the rubber fits perfectly to the fret arch and does not damage the fretboard.</p> <p>65 x 18 x 9 mm.</p> <p></p>

031.224

5/ 5

<p>These HSS blades are extremely hard (approx. 65 HRC), tough and resistant to wear. They are perfect for working hardwoods, veneers, synthetic materials and laminates as well as for making small plane blades. The blades are hardened along their entire length, have double bevels and rounded edges.</p> <p>Blade thickness 2 mm</p> <p>Overall length 160 mm</p> <p></p>

026.015

5/ 5

<p>The shaft and blade are forged from a single piece, finely ground and polished.</p> <p>Spoon Gouges</p> <p>With a bent blade and inside bevel for carving the tops and backs of stringed instruments.</p> <p>Sweep 5</p> <p>Blade width 30 mm</p> <p>Overall length 310 mm</p>

021.274

5/ 5

<p>Precise device for purfling router system enables fine alignment of the routing depth and edge width. Only for use with a Dremel 3000 Multipurpose Rotary Tool</p>

035.082

5/ 5

<p>This handy magnifier with base guarantees the optimal distance between object and lens and is therefore ideal for controlling knife and tool edges after sharpening. The focus can be adjusted by rotating the black ABS plastic frame. A scaled 6 mm-long square opening in the bottom of the magnifier provides optimal magnification. Scale in increments of 0.1 mm. Lens diameter 20 mm.</p>

028.227

5/ 5

<p>The original sharpening sharpener for scrapers with a round and a triangular insert in wear-resistant carbide. Round for sanding with normal deformation pressure, pointed for a high deformation pressure and abundant burr formation on the scraper. Forged aluminum handle with hand guard, instructions for use included and suede pouch.</p> <p>Total length 150 mm</p>

027.030

5/ 5

<p>The ideal tool for removing stubborn end­buttons and for holding endbuttons while shaping their shafts. Screw clamp with leather-lined endbutton holder. Brass or aluminium body with knurled surface, Ø 25 mm. Fits all violin and viola endpins which have a maximum shaft-Ø of 9.5 mm.</p>

033.210

5/ 5

047.045

5/ 5

<p>These chrome-plated bar clamps can exert light to medium pressure. These clamps feature holes drilled at intervals into the back of the bar to accept the point of the thumbscrew rod, allowing the clamps to be used a higher pressures without worrying that the arm might slide. Not only for glue-up, these clamps give good service as well for marking and sawing multiple boards at the same time.</p> <p></p>

030.209

5/ 5

<p>Japanese bar clamps are not designed to develop a lot of pressure, so they can be lightly constructed with eye-pleasing lines. They are well suited, especially the smaller clamps in solid brass, to work on display, or anywhere the use of such elegant tools will be appreciated (even if only by you!). The delicate tools allow finely-fitted small and delicate work pieces to be clamped for fitting and glueing. The clamping depth is limited, so the workpiece normally lies directly on the polished bars, allowing precise clamping while making it less likely the piece will slip out of alignment.</p> <p>These delicate clamps allow finely-fitted small and delicate work pieces to be clamped for fitting and glueing. Length of these brass clamps is approx. 25 mm more than the clamping capacity.</p> <p></p>

030.204

5/ 5

<p>TheMitre fittings are simply slotted onto the bars of the clamps. The self-adjusting fittings are usable for different sizes of framework and different mitre angles. The joint is not covered during clamping and can be inspected from all sides for careful alignment and adjusting. The price for a pair!</p> <p></p>

030.203

5/ 5

<p>Size 30 x 23 x 2.5 mm</p> <p></p>

030.202

5/ 5

<p>Metal clamp rack that keeps 12 clamps ready to hand. Ideal for clamps with the minimum jaw depth of 100 mm and  with a max. bar thickness of 11 mm. </p> <p>Suitable for wall or panel mounting.</p> <p>Dimensions 600 x 100 x 80 mm</p> <p></p>

030.192

5/ 5

<p>This metal glueing aid facilitates and accelerates the glueing procedures with all Bar Clamps. Thanks to the different recesses all kinds of bar clamps can be used for glueing without the clamps falling over.</p> <p></p>

030.191

5/ 5

<p>The one-handed operation leaves the second hand free, e.g. to position the workpiece. The contact pressure can be adjusted by a knurled screw. Two movable pressure plates distribute the pressure evenly; the clamp is therefore also suitable for conical workpieces. A locking mechanism prevents unintended loosening of the clamp (e.g. due to vibrations). A lever between the handles releases the lock. Made of heat-treated alloy steel for high stability and a long service life</p> <p></p>

030.174

5/ 5

<p>These inexpensive all-purpose clamps guarantee powerful clamping pressure, yet are extremely lightweight. Their swivel pressure pads adjust to the contours of the workpiece, while their fibre-reinforced arms withstand heavy-duty use</p> <p></p>

030.170

5/ 5

<p>Versatile metal spring clamp for quick and easy clamping. High contact pressure at the jaw tips over the entire opening range. The jaws are parallel to each other at their maximum opening. PVC-coated jaws and handles prevent pressure marks on the workpiece and lie securely in the hand.</p> <p>Jaw depth 45 mm</p> <p>Jaw opening 55 mm</p> <p>Weight 175 g</p> <p></p>

030.168

5/ 5

<p>It can be used with one hand thanks to a pistol-shaped handle with ratchet mechanism. For secure fixing of guide rails and for clamping on machine and work tables with T-Track. Suitable for guide rails with 12 x 8 cm tracks.</p> <p>Jaw depth 60 mm</p> <p>Jaw opening 160 mm</p> <p></p>

030.166

5/ 5

<p>This needle nose spring clamp is ideal for applying accurate pressure. The fine pressure pads, just 10 mm wide, transfer high pressure even in tight spaces and with a large jaw depth. Suitable for all repair and assembly tasks. Soft plastic pressure pads to protect the workpiece, arms of break-proof fibreglass-reinforced polyamide.</p> <p>Jaw depth 110 mm</p> <p>Jaw opening 70 mm</p> <p></p>

030.162

5/ 5

<p>The clamp arms of ultra-light die-cast magnesium can be quickly set to the exact amount of clamping pressure desired using the ratchet lever. Their exceptionally light weight and protective clamping surfaces make them ideal for delicate workpieces and assembly work. Galvanised steel bar.</p> <p>Jaw depth 80 mm</p> <p>Jaw opening 200 mm</p> <p>Weight 300 g</p> <p></p>

030.161

5/ 5

<p>Lightweight, precision clamps for repairing musical instruments and other fine handcrafted objects. Hand-forged steel frame with galvanised surfaces. Smooth-running brass spindle with knurled knob and steep thread. Ball-jointed, rubber coated pressure plate.</p> <p>The set contains one each:</p> <p>Herdim Hand-Forged Repair Clamp, Jaw Depth 25 mm- Opening 10 mm</p> <p>Herdim Hand-Forged Repair Clamp, Jaw Depth 28 mm- Opening 16 mm</p> <p>Herdim Hand-Forged Repair Clamp, Jaw Depth 40 mm- Opening 29 mm </p> <p>Herdim Hand-Forged Repair Clamp, Jaw Depth 88 mm- Opening 43 mm</p> <p>Herdim Hand-Forged Repair Clamp, Jaw Depth 90 mm- Opening 30 mm</p> <p>Herdim Hand-Forged Repair Clamp, Jaw Depth 135 mm- Opening 42 mm</p> <p>Herdim Hand-Forged Repair Clamp, Jaw Depth 205 mm- Opening 40 mm</p> <p></p> <p></p> <p></p> <p></p>

030.157

5/ 5

<p>These traditional clamps, designed for the repair of musical instruments, are excellently suited to the construction of models thanks to their compact size. The two larger versions have a wide grip, and are therefore also used by restorers to repair damage to the veneer in the middle of table surfaces and tops. Forged by hand, the steel frames are built to withstand the hard knocks of everyday use in the studio, and have galvanized surfaces that are particularly easy to clean. Smooth-running brass spindle with knurled knob and steep thread. Ball-jointed pressure plate with removable rubber coating. Special silicone pads are available as accessories to protect varnished surfaces</p> <p></p>

030.147

5/ 5

<p>Practical edge clamp for easy application of edging on large workpieces and inside and outside radii. It even makes laminating using templates easy without help from others. The non-slip jaws even remain in contact with ultra-smooth surfaces (melamine resin boards) without damaging the surface of the board. The one-handed operation allows you to work on extensive workpieces quickly and without help from others.</p> <p>Jaw opening 10-48 mm</p> <p>Weight 780 g</p> <p></p>

030.136

5/ 5

<p>The Uni Clamp not only has amazing robustness, but also a great number of applications. Not only is it an edge, frame, base, mitre and square clamp, but also body clamp. Since the clamp is suitable for round, oblique and staggered components, there is no need for the mostly cumbersome and workpiece-damaging positioning of traditional clamps on difficult areas. Angles and mitres can be positioned exactly in relation to one another to connect precisely with one another. Also suitable for edge glueing of inner and outer radii and smooth surfaces thanks to the rubberised jaws that prevent slippage or damage to the plate surfaces.</p> <p>Jaw opening 10-48 mm</p> <p>Weight 700 g</p> <p></p>

030.135

5/ 5

<p>Auxiliary device for clamping edgings, veneers, etc. Can be used with most standard screw clamps with a maximum bar thickness of 13 mm. Spindle length 75 mm</p> <p></p>

030.134

5/ 5

<p>Solid 3-way clamp for gluing edges and other rectangular joints. Forged steel clamp arm, zinc-plated.</p> <p>Jaw opening 60 x 60 mm</p> <p>Weight 450 g</p> <p></p>

030.133

5/ 5

030.129

5/ 5

<p>This clamp stays rigid, even at a high tightening torque, and does not slacken. The robust, hardened, hollow profile bar with ribbing and corrugated malleable cast iron clamp arms are designed for clamping for up to 6000 N. A setscrew in the sliding arm, which grips into the ribbing of the bar, offers maximum security against loosening and slippage. Ball-jointed pressure plate (as of 80 mm jaw depth plates can be replaced without tools), strong trapezoid thread, beechwood handle</p> <p></p>

030.115

5/ 5

<p>Highest stability, lowest possible weight and compact dimensions through forged and hardened steel frame. The accurately machined surfaces and the hardened threads allow high precision clamping. Perfectly flat, ball-jointed pressure plate, galvanised arms, trapezoid thread with gunmetal finish, wooden handle.</p> <p>Ø Pressure plate 22 mm</p> <p></p>

030.107

5/ 5

<h2>Hill Peg Composition Hill &amp; Sons</h2> <p>Hill Peg Compound assures that your string instrument pegs to turn easily. Prevents slipping and sticking. Packaged as an easy-to-use stick. This quality peg compound helps lubricate pegs which no longer turn smoothly. This is the original Hill Peg Compound, not an imitation! Made in England.</p> <h3>Our Evaluation of Hill &amp; Sons</h3> <p>Piroli Paste The Hill &amp; Sons Piroli Paste has been carefully evaluated by our team of experts at Grandi Liutai, and it is an excellent product for luthiers and craftsmen seeking a high-quality paste for their gluing and assembly work. This paste has been specifically designed for use in the construction and repair of stringed musical instruments, and we are pleased to confirm that it is a top-quality product that delivers professional and long-lasting results. The Hill &amp; Sons Piroli Paste is formulated with high-quality ingredients chosen to provide strong adhesion and secure bonding. Its creamy consistency makes application and precise bonding of pieces effortless, ensuring reliable and durable stability over time. We particularly appreciate its ability to adapt to a wide range of materials used in the construction and repair of musical instruments, including fine woods, metals, and other components. The Hill &amp; Sons Piroli Paste dries quickly, reducing work time and allowing for efficient progression to subsequent stages of the process. Furthermore, its resistance to moisture and temperature ensures dependable bonding even in varying environmental conditions. The Hill &amp; Sons Piroli Paste is easy to clean and remove excess, enabling clean and precise work. In summary, the Hill &amp; Sons Piroli Paste is a top-quality product that we highly recommend to luthiers, craftsmen, and anyone seeking reliable paste for their gluing and assembly work. Its high-quality formulation, creamy consistency, adaptability to different materials, and quick drying make it the ideal choice for achieving professional and long-lasting results in the construction and repair of stringed musical instruments.</p>

033.151

5/ 5

<p>To simulate string tension when fitting cello bridges. Gun-finished steel.</p>

033.100

5/ 5

<p>Blade width 30 mm</p> <p>Perfect for the plane Code: 023.124</p>

023.125

5/ 5

<p>Body 100 x 40 mm</p> <p>An upright 90° positioned blade setup of a wooden plane for uneven hardwoods (pernambuco, ebony). Brass sole, HSS blade for cutting-edge durability.</p> <p>Weight 380 g</p> <p>Blade width 30 mm</p> <p>Overall length 100 mm</p>

023.124

5/ 5

<p>You can easily tackle all kinds of shapes and complex contours with this ultra-flexible hand sanding sheet for dry sanding.</p> <p>The abrasive surface does not wrinkle or break, and there are no sharp edges even when folded. With the Novastar® Flex hand sanding sheets you get the perfect balance in cutting and scratch pattern.</p> <p>Features colour coded grits and the grip backing, as well as centre perforation for tearing in half. Both full and half sheets can be used with or without a hand pad. The sheets are easy to clean from dust, thus last long and gives a superior finish, helping you save both time and money.</p>

031.214

5/ 5

<p>ideal for very precise hand cutting and paring of joints. This set comes in a card box.</p> <p></p> <p>Total length only 150 mm (6 inch)</p> <p>Blade width 6/13/19/25 mm</p> <p></p>

025.331

5/ 5

<p>An attractive feature of these chisel guards, made of soft silicone, is that they will change their shape to fit any chisel blade. As such they are not only suited for standard western chisels but also for mortise chisels and Japanese blades. In secure contact with the blade over a length of 40 mm, the guard cannot drop off or be accidentally pulled off. The set consists of two guards each for chisels 3 to 6 mm, 8 to 13 mm, 14 to 20 mm, 22 to 26 mm and 28 to 32 mm wide.</p> <p></p> <p>Applies to all chisel guards including these: chisels must be completely dry before they are stored in these silicone guards. Otherwise they will rust.</p> <p>Chisel NOT included!</p> <p></p>

025.330

5/ 5

<p>Max. handle diameter 28 mm</p> <p>Max. recommended length of tools 280 mm</p> <p>Length unrolled 33 cm</p> <p></p>

025.322

5/ 5

<p>Max. handle diameter 28 mm</p> <p>Max. recommended length of tools 280 mm</p> <p>Length unrolled 33 cm</p> <p></p>

025.321

5/ 5

<p>Interior diameter of pockets 26 to 27 mm</p> <p>Max. recommended length of tools 280 mm</p> <p></p>

025.317

5/ 5

<p>This set of ISI SHARP chisels is a solid basic equipment for every woodworker. The carbon steel blade (T10) is hardened to 61 - 63 HRC. The ash handles are without impact ring, so that the irons can be more comfortably guided by hand or struck with the heel of the hand. Even without an impact ring, the ash handles can withstand light to medium blows with a mallet. The handles have a colorless matte finish and are slightly flattened on two sides to prevent rolling.</p> <p></p> <p>Iron widths in the set: 6, 10, 12, 16, 20, 26 mm</p> <p>Bevel angle 25°</p> <p>Total length, depending on blade width 250 to 270 mm</p> <p>Blade length measured without tang, depending on blade width 97 to 105 mm</p> <p>Handle diameter 29 mm</p> <p>In Original wooden case</p> <p></p> <p>The Patented ISI SHARP:</p> <p>The face of a chisel must be flat in order to make precise wood joints. Most woodworkers are familiar with this fact. However, you may have experienced that it is not so easy to produce or maintain such a precise face on Western chisels.</p> <p></p> <p>The face of a Western chisel is relatively long, usually between 100 and 120 mm. When the entire length of the mirror side is honed on a flat waterstone, it bumps and lifts at the transition to the tang. At this moment, the honing stone has contact with the iron only at the cutting edge and at the tang. This means that the objective of achieving a flat mirror surface is not realized. In practice, therefore, only the part of the face close to the cutting edge is honed. However, it cannot be avoided that the face of the mirror becomes rounded over time, since there is no defined end of the grinding surface towards the tang side. Precise work is therefore only possible to a limited extent.</p> <p></p> <p>Why do Japanese chisels not have this problem? The face of Japanese chisels is short, often only 60 to 70 mm. In addition, due to single or multiple hollow grinding (Ura) of the face of the chisel, the area that has to be removed is considerably reduced. The third and decisive advantage is that the tang is angled with respect to the longitudinal axis of the face of the iron. This means that the sharpening or honing stone only touches the surface of the mirror side, which is limited on all sides. The result is a permanently flat mirror side.</p> <p></p> <p>The basic idea behind the isi sharp chisels is to transfer this advantage of Japanese chisels to Western chisels.</p> <p></p> <p>First of all, the question remains to be answered as to why Japanese chisels are not used instead of Western chisels. The answer: Many Western woodworkers find the Japanese chisels too short. Not everyone likes to get used to the angled handle.</p> <p></p> <p>The face of the isi sharp chisel chisel4 is designed as a flat surface in its part close to the cutting edge up to a length of approx. 70 mm. The novel feature is that the remaining surface is recessed by 0.5 to 0.6 mm up to the tang. This means that the surface to be ground is clearly defined on all 4 sides and reduced to the length of a Japanese chisel. This also means that the result is a permanently flat face of the chisel. This invention originates from Friedrich Kollenrott and is registered as a utility model at the German Patent Office.</p> <p></p>

025.312

5/ 5

025.300

5/ 5

<p>Consisting of:</p> <p>1 chisel with straight blade, 4 mm</p> <p>1 gouge hollow medium 12 mm</p> <p>1 paring chisel 20 mm</p> <p>1 chisel with straight blade 26 mm</p> <p>This set was designed for use at construction sites, which usually lack an adequate supply of chisels. The 3/16 inch (4 mm) chisel is suitable for cutting mortises; the medium-profile gouge is useful in mounting locks and strike plates; the cranked chisel is invaluable for corner and rabbeting work - the only paring chisel which can be struck with a hammer without second thought. There is a 1 inch (26 mm) chisel for the really rough stuff. This set should be part of every construction tool box! Comes in wooden case.</p> <p></p>

025.299

5/ 5

<p>Why do we offer not polished Two Cherries Chisels?</p> <p>Two Cherries chisels are well known for coming with a highly-polished finish. The polishing process creates a mirror finish on the surface of the steel, which looks very nice, and reduces friction with the wood. But the polishing process, done with a soft wheel, rounds the bevel and the face of the chisel slightly. When one would like to do very precise work with wood, completely flat surfaces are a must. So for those who value being able to do the finest work, we sell Two Cherries chisels that have been ground and sharpened to a very high standard, but with no mirror finish.</p> <p>6, 10, 12, 16, 20, 26 mm</p> <p></p>

025.278

5/ 5

025.277

5/ 5

<p>Length 160 mm, ferrule Ø 24 mm.</p> <p>Swiss hornbeam handles, fitted with top and bottom ferrules.</p> <p></p>

025.257

5/ 5

<p>Length 135 mm, ferrule Ø 24 mm.</p> <p>Swiss hornbeam handles, fitted with top and bottom ferrules.</p> <p></p>

025.256

5/ 5

<p>Protect your tools with these tool rolls made of indestructible »Schwingerhosen-yarn« linen. The robust »Schwingerhose« is as much admired in Switzerland as the »Lederhose« (traditional Bavarian leather trousers) in Germany. The inside is lined with grey felt and thus protects the tools from touching each other and keeps away dust and shavings.</p> <p>Pockets 8</p> <p></p>

025.252

5/ 5

<p>This preformed protective cap made of cow leather are fixed to the chisels necks via a snap. For Japanese chisels with a blade length of up to approx. 60 mm.</p> <p></p> <p></p>

025.248

5/ 5

<p>Made of fine-quality leather. The seams are reinforced with rivets.</p> <p>Pockets 20</p> <p>Max. tool length 270 mm</p> <p>Outer dimensions 790 x 290 mm</p> <p></p>

025.228

5/ 5

<p>Made of fine-quality leather. The seams are reinforced with rivets.</p> <p>Pockets 12</p> <p>Max. tool length 300 mm</p> <p>Outer dimensions 550 x 320 mm</p> <p></p>

025.227

5/ 5

<p>Made of fine-quality leather. The seams are reinforced with rivets.</p> <p>Pockets 12</p> <p>Max. tool length 270 mm</p> <p>Outer dimensions 550 x 290 mm</p> <p></p>

025.226

5/ 5

<p>Made of fine-quality leather. The seams are reinforced with rivets.</p> <p>Pockets 6</p> <p>Max. tool length 300 mm</p> <p>Outer dimensions 370 x 320 mm</p> <p></p>

025.225

5/ 5

<p>Made of fine-quality leather. The seams are reinforced with rivets.</p> <p>Pockets 6</p> <p>Max. tool length 270 mm</p> <p>Outer dimensions 370 x 290 mm</p> <p></p>

025.224

5/ 5

<p>High-quality leather tool roll made of fine cowhide. The tools are safely secured in place by an elastic strap that prevents the tools from slipping out in any situation. The well-designed closure straps provide comfortable opening and closing, and round off the appealing design of the leather tool roll.</p> <p>Pockets 12</p> <p>Max. tool length 300 mm</p> <p>Outer dimensions 600 x 340 mm</p> <p></p>

025.223

5/ 5

<p>High-quality leather tool roll made of fine cowhide. The tools are safely secured in place by an elastic strap that prevents the tools from slipping out in any situation. The well-designed closure straps provide comfortable opening and closing, and round off the appealing design of the leather tool roll.</p> <p>Pockets 6</p> <p>Max. tool length 300 mm</p> <p>Outer dimensions 380 x 340 mm</p> <p></p>

025.222

5/ 5

<p>6-piece set in kiri wood case</p> <p>The blades of 24-layered Damascus steel (Suminagashi), laminated with Blue Paper Steel (approx. 61 HRC), have outstanding endurance, even on the hardest woods. Hefty handle of Japanese red oak, with a slim neck for controlled guidance during paring. The blades are sharpened and ready for use, not angled and have a flat back (not hollow-ground).</p> <p>Blade length 65 mm</p> <p>Overall length 210 mm</p> <p>Blade thickness 7 mm</p> <p>Version 6-Piece Set in Kiri Wood Case</p> <p>Blade width 6 / 12 / 19 / 25 / 32 / 38 mm</p> <p></p> <p>Japanese steel quality - Western blade form</p> <p></p>

025.221

5/ 5

<p>Three fully functional miniature chisels, which are reproduced on a scale of 1:3 compared to the regular Veritas chisels. Only 83 mm long overall, PM-V11 steel blade (61-63 HRC) and ground flat on the face, precious wood handles and stainless steel ferrule. Bevel angle 25°. Not only a nice gift idea or a collector's item: these chisels are extremely helpful where fine, precise cuts are needed. Comes in an elegant leatherette case.</p> <p>Overall length 83 mm</p> <p>Blade thickness 2.4 mm</p> <p>Blade width 3 / 6 / 9.5 mm</p> <p></p>

025.214

5/ 5

<p>10-piece set in a leather tool roll: 3 / 6 / 9 / 12 / 15 / 18 / 24 / 30 / 36 / 42 mm</p> <p>Well-crafted chisels with durable double-layered blades (milled steel). Waxed handles of Japanese red oak with pre-fitted hoops.</p> <p>Blade length 58 mm</p> <p>Overall length 225 mm</p> <p>Blade thickness 5-6 mm</p> <p>Version 10-Piece Set in Leather Tool Roll</p> <p>Blade width 3 / 6 / 9 / 12 / 15 / 18 / 24 / 30 / 36 / 42 mm</p> <p> </p> <p>Set consists of the following articles:</p> <p></p> <p>Tataki Nomi, Chisel, Blade Width 3 mm</p> <p>Tataki Nomi, Chisel, Blade Width 6 mm</p> <p>Tataki Nomi, Chisel, Blade Width 9 mm</p> <p>Tataki Nomi, Chisel, Blade Width 12 mm</p> <p>Tataki Nomi, Chisel, Blade Width 15 mm</p> <p>Tataki Nomi, Chisel, Blade Width 18 mm</p> <p>Tataki Nomi, Chisel, Blade Width 24 mm</p> <p>Tataki Nomi, Chisel, Blade Width 30 mm</p> <p>Tataki Nomi, Chisel, Blade Width 36 mm</p> <p>Tataki Nomi, Chisel, Blade Width 42 mm</p> <p>Leather Tool Roll, 12 Pockets</p> <p></p>

025.213

5/ 5

<p>"6-piece set in a leather tool roll:_ 6 / 9 / 12 / 18 / 24 / 30 mm</p> <p>Well-crafted chisels with durable double-layered blades (milled steel). Waxed handles of Japanese red oak with pre-fitted hoops.</p> <p>Blade length 58 mm</p> <p>Overall length 225 mm</p> <p>Blade thickness 5-6 mm</p> <p>Version 6-Piece Set in Leather Tool Roll</p> <p>Blade width 6 / 9 / 12 / 18 / 24 / 30 mm</p> <p> </p> <p>Set consists of the following articles:</p> <p></p> <p>Tataki Nomi, Chisel, Blade Width 6 mm</p> <p>Tataki Nomi, Chisel, Blade Width 9 mm</p> <p>Tataki Nomi, Chisel, Blade Width 12 mm</p> <p>Tataki Nomi, Chisel, Blade Width 18 mm</p> <p>Tataki Nomi, Chisel, Blade Width 24 mm</p> <p>Tataki Nomi, Chisel, Blade Width 30 mm</p> <p>Leather Tool Roll, 6 Pockets</p> <p></p>

025.212

5/ 5

<p>6-piece set in a cotton tool roll:_ 6 / 9 / 12 / 18 / 24 / 30 mm</p> <p>Well-crafted chisels with durable double-layered blades (milled steel). Waxed handles of Japanese red oak with pre-fitted hoops.</p> <p>Blade length 58 mm</p> <p>Overall length 225 mm</p> <p>Blade thickness 5-6 mm</p> <p>Version 6-Piece Set in Cotton Tool Roll</p> <p>Blade width 6 / 9 / 12 / 18 / 24 / 30 mm</p> <p></p>

025.211

5/ 5

<p>Well-crafted chisels with durable double-layered blades (milled steel). Waxed handles of Japanese red oak with pre-fitted hoops.</p> <p>Blade length 58 mm</p> <p>Overall length 225 mm</p> <p>Blade thickness 5-6 mm</p> <p>Version Single Chisel</p> <p>Blade width 3 mm</p> <p></p>

025.201

5/ 5

<p>10-piece set in a wooden case: 3 / 6 / 9 / 12 / 15 / 18 / 24 / 30 / 36 / 42 mm</p> <p>Inexpensive Japanese chisels made of milled steel (double-layered, 60 HRC) in a kiri wood case. Handles made of Japanese red oak.</p> <p>Blade length 58 mm</p> <p>Overall length 225 mm</p> <p>Blade thickness 5-6 mm</p> <p>Version 10-Piece Set in Wooden Case</p> <p>Blade width 3 / 6 / 9 / 12 / 15 / 18 / 24 / 30 / 36 / 42 mm</p> <p></p>

025.200

5/ 5

<p>6 piece set in a wooden case: 6 / 9 / 12 / 18 / 24 / 30 mm</p> <p>Inexpensive Japanese chisels made of milled steel (double-layered, 60 HRC) in a kiri wood case. Handles made of Japanese red oak.</p> <p>Blade length 58 mm</p> <p>Overall length 225 mm</p> <p>Blade thickness 5-6 mm</p> <p>Version 6-Piece Set in Wooden Case</p> <p>Blade width 6 / 9 / 12 / 18 / 24 / 30 mm</p> <p></p>

025.199

5/ 5

<p>Blade width: 40 / 50 / 63 / 75 / 90 mm</p> <p>These extra-broad chisels are perfect for large-scale carpentry, restoration and sculpture work. The front portion of the spade-shaped blade is made of HSS (64 HRC) and is hard-soldered to the body via a transitional metal layer. Durable handle made of fine-grained Chinese hardwood with untreated surface.</p> <p>Blade length 80 mm</p> <p>Overall length 240 mm</p> <p>Blade thickness 4 mm</p> <p>Version 5-Piece Set in Cotton Tool Roll</p> <p>Blade width 40 / 50 / 63 / 75 / 90 mm</p> <p></p>

025.198

5/ 5

<p>12-piece set in a leather tool roll: 4 / 6 / 8 / 10 / 12 / 16 / 20 / 26 / 30 / 32 / 35 / 40 mm</p> <p>Precision-made chisels with a traditional design. Forged from a chrome-vanadium steel alloy, heat-treated in an electric furnace, then ground and polished by hand. The high quality of these chisels is noticeable in their uniform hardness (approx. 60 HRC) and homogeneous fine mirror polish. The blades come pre-sharpened, ready to use, and fitted with unvarnished hornbeam handles.</p> <p>Blade length 95-105 mm</p> <p>Overall length 260-280 mm</p> <p>Blade thickness 2.5-4.5 mm</p> <p>Version 12-Piece Set in Leather Tool Roll</p> <p>Blade width 4 / 6 / 8 / 10 / 12 / 16 / 20 / 26 / 30 / 32 / 35 / 40 mm</p> <p></p>

025.186

5/ 5

<p>6-piece set in a leather tool roll: 6 / 10 / 12 / 20 / 26 / 30 mm</p> <p>Precision-made chisels with a traditional design. Forged from a chrome-vanadium steel alloy, heat-treated in an electric furnace, then ground and polished by hand. The high quality of these chisels is noticeable in their uniform hardness (approx. 60 HRC) and homogeneous fine mirror polish. The blades come pre-sharpened, ready to use, and fitted with unvarnished hornbeam handles.</p> <p>Blade length 95-105 mm</p> <p>Overall length 260-280 mm</p> <p>Blade thickness 2.5-4.5 mm</p> <p>Version 6-Piece Set in Leather Tool Roll</p> <p>Blade width 6 / 10 / 12 / 20 / 26 / 30 mm</p> <p></p>

025.185

5/ 5

<p>6-piece set in beechwood case: 6 / 10 / 12 / 16 / 20 / 26 mm</p> <p>Precision-made chisels with a traditional design. Forged from a chrome-vanadium steel alloy, heat-treated in an electric furnace, then ground and polished by hand. The high quality of these chisels is noticeable in their uniform hardness (approx. 60 HRC) and homogeneous fine mirror polish. The blades come pre-sharpened, ready to use, and fitted with unvarnished hornbeam handles.</p> <p>Blade length 95-105 mm</p> <p>Overall length 260-280 mm</p> <p>Blade thickness 2.5-4.5 mm</p> <p>Version 6-Piece Set in Beechwood Case</p> <p>Blade width 6 / 10 / 12 / 16 / 20 / 26 mm</p> <p></p>

025.184

5/ 5

<p>Precision-made chisels with a traditional design. Forged from a chrome-vanadium steel alloy, heat-treated in an electric furnace, then ground and polished by hand. The high quality of these chisels is noticeable in their uniform hardness (approx. 60 HRC) and homogeneous fine mirror polish. The blades come pre-sharpened, ready to use, and fitted with unvarnished hornbeam handles.</p> <p>Blade length 95-105 mm</p> <p>Overall length 260-280 mm</p> <p>Blade thickness 2.5-4.5 mm</p> <p>Version Single Chisel</p> <p>Blade width 4 mm</p> <p></p>

025.172

5/ 5

<p>6-piece set in a cotton tool roll: 6 / 9 / 12 / 18 / 24 / 30</p> <p>Ideal for restoration, on-site carpentry and cabinetmaking. Normal blade length available in all standard chisel sizes.</p> <p>HSS Chisels</p> <p>Ready to use, robust and razor sharp</p> <p>These powerful chisels made of extremely hard HSS offer excellent sharpness and a long edge life. Very hard (approx. 63 HRC) and tough, these chisels are able to withstand the rough handling which is often unavoidable in a workshop. Even sharpening on dry grinding machines is possible without compromising the hardness of the steel. The extra-long handles are made of Japanese red oak and have pre-fitted, forged steel hoops.</p> <p>Blade length 60 mm</p> <p>Overall length 240 mm</p> <p>Blade thickness 5-6 mm</p> <p>Version 6-Piece Set in Cotton Tool Roll</p> <p>Blade width 6 / 9 / 12 / 18 / 24 / 30 mm</p> <p>Set consists of the following articles:</p> <p>HSS Chisel for Cabinetmakers, Blade Width 6 mm</p> <p>HSS Chisel for Cabinetmakers, Blade Width 9 mm</p> <p>HSS Chisel for Cabinetmakers, Blade Width 12 mm</p> <p>HSS Chisel for Cabinetmakers, Blade Width 18 mm</p> <p>HSS Chisel for Cabinetmakers, Blade Width 24 mm</p> <p>HSS Chisel for Cabinetmakers, Blade Width 30 mm</p> <p></p>

025.171

5/ 5

<p>10-piece set in a leather tool roll: 3 / 6 / 9 / 12 / 15 / 18 / 24 / 30 / 36 / 42 mm</p> <p>Ideal for restoration, on-site carpentry and cabinetmaking. Normal blade length available in all standard chisel sizes.</p> <p>HSS Chisels</p> <p>Ready to use, robust and razor sharp</p> <p>These powerful chisels made of extremely hard HSS offer excellent sharpness and a long edge life. Very hard (approx. 63 HRC) and tough, these chisels are able to withstand the rough handling which is often unavoidable in a workshop. Even sharpening on dry grinding machines is possible without compromising the hardness of the steel. The extra-long handles are made of Japanese red oak and have pre-fitted, forged steel hoops.</p> <p>Blade length 60 mm</p> <p>Overall length 240 mm</p> <p>Blade thickness 5-6 mm</p> <p>Version 10-Piece Set in Leather Tool Roll</p> <p>Blade width 3 / 6 / 9 / 12 / 15 / 18 / 24 / 30 / 36 / 42 mm</p> <p> Set consists of the following articles:</p> <p></p> <p>Leather Tool Roll, 12 Pockets</p> <p>HSS Chisel for Cabinetmakers, Blade Width 3 mm</p> <p>HSS Chisel for Cabinetmakers, Blade Width 6 mm</p> <p>HSS Chisel for Cabinetmakers, Blade Width 9 mm</p> <p>HSS Chisel for Cabinetmakers, Blade Width 12 mm</p> <p>HSS Chisel for Cabinetmakers, Blade Width 15 mm</p> <p>HSS Chisel for Cabinetmakers, Blade Width 18 mm</p> <p>HSS Chisel for Cabinetmakers, Blade Width 24 mm</p> <p>HSS Chisel for Cabinetmakers, Blade Width 30 mm</p> <p>HSS Chisel for Cabinetmakers, Blade Width 36 mm</p> <p>HSS Chisel for Cabinetmakers, Blade Width 42 mm</p> <p></p>

025.170

5/ 5

<p>6-piece set in a leather tool roll: 6 / 9 / 12 / 18 / 24 / 30 mm</p> <p>Ideal for restoration, on-site carpentry and cabinetmaking. Normal blade length available in all standard chisel sizes.</p> <p>HSS Chisels</p> <p>Ready to use, robust and razor sharp</p> <p>These powerful chisels made of extremely hard HSS offer excellent sharpness and a long edge life. Very hard (approx. 63 HRC) and tough, these chisels are able to withstand the rough handling which is often unavoidable in a workshop. Even sharpening on dry grinding machines is possible without compromising the hardness of the steel. The extra-long handles are made of Japanese red oak and have pre-fitted, forged steel hoops.</p> <p>Blade length 60 mm</p> <p>Overall length 240 mm</p> <p>Blade thickness 5-6 mm</p> <p>Version 6-Piece Set in Leather Tool Roll</p> <p>Blade width 6 / 9 / 12 / 18 / 24 / 30 mm</p> <p></p>

025.169

5/ 5

<p>A cotton canvas tool roll protects the chisels when not in use.</p> <p>6-piece set in a cotton tool roll: 6 / 12 / 19 / 25 / 32 / 38 mm</p> <p>These chisels come in a completely Western design with a long blade of vanadium-alloyed steel for high durability (approx. 61 HRC). With a large ferrule and big handle made of Japanese red oak. The back of the blade is flat (not hollow-ground).</p> <p>Blade length 95 mm</p> <p>Overall length 255 mm</p> <p>Blade thickness 3-5 mm</p> <p>Version 6-piece set, in cotton tool roll</p> <p>Blade width 6 / 12 / 19 / 25 / 32 / 38 mm</p> <p></p>

025.158

5/ 5

<p>"Comes in a jute tool roll.</p> <p>These robust tools are not only great for reworking timber joints, but are also suited for occasional prying and for evening plaster. Alloyed tool steel with a hardness of 60-62 HRC at the front end of the blade. The neck and tang are made of softer steel to cushion hammer blows.</p> <p>Blade length 125-145 mm</p> <p>Overall length 300-360 mm</p> <p>Blade thickness 5.5 mm</p> <p>Version 4-Piece Set in Jute Tool Roll</p> <p>Blade width 25 / 30 / 40 / 50 mm</p> <p> </p> <p>Set consists of the following articles:</p> <p></p> <p>All-metal Chisel, 40 mm</p> <p>All-metal Chisel, 25 mm</p> <p>All-metal Chisel, 50 mm</p> <p>DICTUM Jute Tool Roll for Japanese Saws, Size 2</p> <p>All-metal Chisel, 30 mm</p> <p></p>

025.147

5/ 5

<p>These robust tools are not only great for reworking timber joints, but are also suited for occasional prying and for evening plaster. Alloyed tool steel with a hardness of 60-62 HRC at the front end of the blade. The neck and tang are made of softer steel to cushion hammer blows.</p> <p>Blade length 125-145 mm</p> <p>Overall length 300-360 mm</p> <p>Blade thickness 5.5 mm</p> <p>Version Single Chisel</p> <p>Blade width 25 mm</p> <p></p>

025.143

5/ 5

<p>5-piece set in a leather tool roll: 15 / 24 / 30 / 42 / 48 mm</p> <p>For heavy-duty restoration and joinery work on site. Extra-long blades with reinforced necks and thicker blades for deep mortise holes and large stock.</p> <p>HSS Chisels</p> <p>Ready to use, robust and razor sharp</p> <p>These powerful chisels made of extremely hard HSS offer excellent sharpness and a long edge life. Very hard (approx. 63 HRC) and tough, these chisels are able to withstand the rough handling which is often unavoidable in a workshop. Even sharpening on dry grinding machines is possible without compromising the hardness of the steel. The extra-long handles are made of Japanese red oak and have pre-fitted, forged steel ferrules.</p> <p>Blade length 80 mm</p> <p>Overall length 290 mm</p> <p>Blade thickness 6-8 mm</p> <p>Version 5-Piece Set in Leather Tool Roll</p> <p>Blade width 15 / 24 / 30 / 42 / 48 mm</p> <p></p> <p>Set consists of the following articles:</p> <p></p> <p>Leather Tool Roll, 6 Pockets</p> <p>HSS Chisel for Carpenters, Blade Width 15 mm</p> <p>HSS Chisel for Carpenters, Blade Width 24 mm</p> <p>HSS Chisel for Carpenters, Blade Width 30 mm</p> <p>HSS Chisel for Carpenters, Blade Width 42 mm</p> <p>HSS Chisel for Carpenters, Blade Width 48 mm</p> <p></p>

025.142

5/ 5

<p>"3-piece set in a leather tool roll: 15 / 24 / 30 mm</p> <p>For heavy-duty restoration and joinery work on site. Extra-long blades with reinforced necks and thicker blades for deep mortise holes and large stock.</p> <p>HSS Chisels</p> <p>Ready to use, robust and razor sharp</p> <p>These powerful chisels made of extremely hard HSS offer excellent sharpness and a long edge life. Very hard (approx. 63 HRC) and tough, these chisels are able to withstand the rough handling which is often unavoidable in a workshop. Even sharpening on dry grinding machines is possible without compromising the hardness of the steel. The extra-long handles are made of Japanese red oak and have pre-fitted, forged steel ferrules.</p> <p>Blade length 80 mm</p> <p>Overall length 290 mm</p> <p>Blade thickness 6-8 mm</p> <p>Version 3-Piece Set in Leather Tool Roll</p> <p>Blade width 15 / 24 / 30 mm</p> <p></p> <p>Set consists of the following articles:</p> <p></p> <p>Leather Tool Roll, 6 Pockets</p> <p>HSS Chisel for Carpenters, Blade Width 15 mm</p> <p>HSS Chisel for Carpenters, Blade Width 24 mm</p> <p>HSS Chisel for Carpenters, Blade Width 30 mm</p> <p></p>

025.141

5/ 5

<p>For heavy-duty restoration and joinery work on site. Extra-long blades with reinforced necks and thicker blades for deep mortise holes and large stock.</p> <p>HSS Chisels</p> <p>Ready to use, robust and razor sharp</p> <p>These powerful chisels made of extremely hard HSS offer excellent sharpness and a long edge life. Very hard (approx. 63 HRC) and tough, these chisels are able to withstand the rough handling which is often unavoidable in a workshop. Even sharpening on dry grinding machines is possible without compromising the hardness of the steel. The extra-long handles are made of Japanese red oak and have pre-fitted, forged steel ferrules.</p> <p>Blade length 80 mm</p> <p>Overall length 290 mm</p> <p>Blade thickness 6-8 mm</p> <p>Version Single Chisel</p> <p>Blade width 15 mm</p> <p></p>

025.136

5/ 5

<p>5-piece set in a cotton tool roll: 6.35 / 9.5 / 12.7 / 19 / 25.4 mm</p> <p>These chisels made by traditional tool manufacturer Henry Taylor, founded in 1834 in Sheffield, England, feature high-quality carbon steel, strong brass ferrules and dark-stained beechwood handles. The rounded handles make them comfortable to hold, but they also easily withstand the stress of chiselling wood joints with a mallet.</p> <p>Blade length 100-115 mm</p> <p>Overall length 260-280 mm</p> <p>Blade thickness 3-6 mm</p> <p>Version 5-piece set, in cotton tool roll</p> <p>Blade width 6.35 / 9.5 / 12.7 / 19 / 25.4 mm</p> <p></p>

025.135

5/ 5

<p>10-piece set in a cotton tool roll: 4 / 8 / 10 / 12 / 16 / 20 / 26 / 30 / 40 mm</p> <p>High-quality chisels with hornbeam handle. The forged chisels feature highly polished blades of high-alloy tool steel (approx. 59-61 HRC) which are corrosion-protected by an ecological, water-based, stove-enamel finish. The ergonomically shaped handle with sturdy hoop is comfortable to hold and shock-absorbent due to a leather disc.</p> <p>The Stubai chisels we offer are all made of their top-quality steel.</p> <p>Blade length 120-157 mm</p> <p>Overall length 237-295 mm</p> <p>Blade thickness 3-6 mm</p> <p>Version 10-piece set, in cotton tool roll</p> <p>Blade width 4 / 6 / 8 / 10 / 12 / 16 / 20 / 26 / 30 / 40 mm</p> <p></p>

025.129

5/ 5

<p>6-piece set in a cotton tool roll: 6 / 10 / 12 / 16 / 20 / 26 mm</p> <p>High-quality chisels with hornbeam handle. The forged chisels feature highly polished blades of high-alloy tool steel (approx. 59-61 HRC) which are corrosion-protected by an ecological, water-based, stove-enamel finish. The ergonomically shaped handle with sturdy hoop is comfortable to hold and shock-absorbent due to a leather disc.</p> <p>The Stubai chisels we offer are all made of their top-quality steel.</p> <p>Blade length 120-157 mm</p> <p>Overall length 237-295 mm</p> <p>Blade thickness 3-6 mm</p> <p>Version 6-Piece Set in Cotton Tool Roll</p> <p>Blade width 6 / 10 / 12 / 16 / 20 / 26 mm</p> <p></p>

025.128

5/ 5

<p>High-quality chisels with hornbeam handle. The forged chisels feature highly polished blades of high-alloy tool steel (approx. 59-61 HRC) which are corrosion-protected by an ecological, water-based, stove-enamel finish. The ergonomically shaped handle with sturdy hoop is comfortable to hold and shock-absorbent due to a leather disc.</p> <p>The Stubai chisels we offer are all made of their top-quality steel.</p> <p>Blade length 120-157 mm</p> <p>Overall length 237-295 mm</p> <p>Blade thickness 3-6 mm</p> <p>Version Single Chisel</p> <p>Blade width 4 mm</p> <p></p>

025.118

5/ 5

<p>These hand-forged chisels are exceptionally sharp and hold their edge extremely well thanks to a cutting layer made of White Paper Steel. The steel is similar to the traditional Tamahagane steel (Japanese sword steel) and has a very fine-grained structure. After sharpening by hand, the blades are fitted with high-quality handles made of »Kumi«, a hard Japanese wood species traditionally used for chisel handles.</p> <p>Blade length 60 mm</p> <p>Overall length 225 mm</p> <p>Blade thickness 5-7.5 mm</p> <p>Version Single Chisel</p> <p></p> <p></p>

025.114

5/ 5

<p>1 marking knife and 6 chisels in wooden box: 6 / 10 / 12 / 16 / 20 / 26 mm</p> <p>These perfectly shaped paring chisels and the marking knife made of chrome-vanadium steel are hardened to approx. 60 HRC. The oval shape of the octagonal oiled elm wood handle near the chisel provides a comfortable, non-slip grip. Due to the bevelled sides and the trapezoidal cross-section, these chisels are ideal for finishing wood joints, such as dovetails or mortise holes. The marking knife, equipped with an oiled walnut handle and a finger groove in the front, provides a comfortable grip and, thanks to the prism blade, can be used for cutting against right- or left-hand stops. Suitable for right- and left-handed use.</p> <p>Blade length 100 mm</p> <p>Overall length 265 mm</p> <p>Blade thickness 3-5 mm</p> <p>Version 7-piece set, in a wooden case</p> <p>Blade width 6 / 10 / 12 / 16 / 20 / 26 mm</p> <p></p>

025.113

5/ 5

<p>Blade width: 12.5 / 19 / 25 / 31 / 38 mm</p> <p>Extra-hard HSS (64 HRC) for heavy-duty applications and working on wearing materials. The slightly tapered blades reach corners and undercuts effortlessly. Fine-grained handle made of Chinese hardwood.</p> <p>Blade length 105 mm</p> <p>Overall length 230 mm</p> <p>Blade thickness 4 mm</p> <p>Version 5-Piece Set in Cotton Tool Roll</p> <p>Blade width 12.5 / 19 / 25 / 31 / 38 mm</p> <p></p>

025.105

5/ 5

<p>These carving tools are hand forged from special high carbon tool steel. This complicated and expensive process is the basis of the quality and durability for which the Grandi Liutai Italiani tools are known. The tools are hardened to RC61 and are mirror polished to facilitate subsequent sharpening and prevent rust.</p> <p></p> <p> the overall length of each gouge is from 24 to 26 cm. The wider gouges are often used with mallets, and are stronger to withstand repeated blows. The octagonal white birch handles are sized according to the shape of the gouge, and are wrapped in metal rings to prevent cracking or breaking .</p> <p></p> <p>The thickness of these gouges is much higher than those of any other brand on the market, and this is a very important factor for artisans who like to have sturdy and always perfectly sharp carving tools.</p>

021.291

5/ 5

032.414

5/ 5

<p>With diamond tip, for trueing ingrained or unround grinding wheels.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p></p>

032.413

5/ 5

<p>Fits models 2000 - 2006 and T7. </p> <p></p>

032.412

5/ 5

<p>Linen, suitable for Tormek T-7 and T-8.</p> <p></p>

032.411

5/ 5

<p>For turning tools (scrapers, scorps, inshaves), chisels, scraper blades etc. ""Torlock"" locking system.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p></p>

032.410