Spoon Gouge Pfeil, Sweep 5 / 30 mm Pfeil Pfeil
  • Spoon Gouge Pfeil, Sweep 5 / 30 mm Pfeil Pfeil

Spoon Gouge Pfeil, Sweep 5 / 30 mm

,
5/ 5
<p>The shaft and blade are forged from a single piece, finely ground and polished.</p> <p>Spoon Gouges</p> <p>With a bent blade and inside bevel for carving the tops and backs of stringed instruments.</p> <p>Sweep 5</p> <p>Blade width 30 mm</p> <p>Overall length 310 mm</p>
021.274
Spoon Gouge Pfeil, Sweep 5 / 30 mm Pfeil Pfeil
€73.69

By buying this product you can collect up to 147 point points. Your cart will total 147 points that can be converted into a voucher of €1.47.

Shipping in 7-10 days

With a bent blade and inside bevel for carving the tops and backs of stringed instruments.

Quantity

The shaft and blade are forged from a single piece, finely ground and polished.

Spoon Gouges

With a bent blade and inside bevel for carving the tops and backs of stringed instruments.

Sweep 5

Blade width 30 mm

Overall length 310 mm

021.274

Cross Sell Products

2 other products in the same category:

  • ,
    5/ 5
    <p>The long bent form is used in curved recesses to allow you to cut out of the piece from the deepest point without damaging the edges of recess.</p> <p></p> <p>With over 700 forms and sweeps, Pfeil offers the largest and most variable product range. The products of the world’s leading manufacture of fine carving tools are made from specially alloyed, hard tool steel, forged and ground on precision machines, heat-treated in an electric furnace. The blades are uniformly hardened to 59-61 HRC along their entire length, the break-proof oiled ash handles are mounted with inner ferrules. Only indigenous woods and solvent-free oils are used.</p> <p></p> <p>Overall length +/- 250 mm</p> <p>Blade length +/- 120 mm</p> <p></p>
    021.200
    Pfeil bent gouge Pfeil Home Pfeil bent gouge
    Price €29.51
  • ,
    5/ 5
    <p>Gouges are used for anything from rough work to shaping and finishing, and are therefore the most versatile sculptor's tools. If necessary, each of these gouges can also be used the other way round to work on convex surfaces. </p> <p>Pfeil Carving Tools</p> <p>With over 700 forms and sweeps, Pfeil offers the largest and most variable product range. The products of the world’s leading manufacture of fine carving tools are made from specially alloyed, hard tool steel, forged and ground on precision machines, heat-treated in an electric furnace. The blades are uniformly hardened to 59-61 HRC along their entire length, the break-proof oiled ash handles are mounted with inner ferrules. Only indigenous woods and solvent-free oils are used.</p> <p></p> <p>Overall length 250 mm</p> <p>Blade length 120 mm</p>
    021.209
    Pfeil Straight gouge Pfeil Gouges Pfeil Straight gouge
    Price €24.59