Sharpening

5/ 5

<p>Prevents sharpening stone slippage</p> <p></p>

032.236

5/ 5

<p>Non-slip rubber base for sharpening stones. Length of stone support area: 70 mm per side.</p> <p>Width 80 mm</p> <p>Support height 15 mm</p> <p></p> <p></p>

032.235

5/ 5

<p>Finely woven, silicon carbide-coated grille for trueing uneven sharpening stones. The grille is placed on a flat surface and the sharpening stone is rubbed over it in a circular motion.</p> <p>Grit 80</p> <p>Dimensions 140 x 230 mm</p> <p></p>

032.234

5/ 5

<p>Hard ceramic blocks for trueing Japanese waterstones quickly and accurately. The stones are worked wet on the block until plane.</p> <p>Grit 100</p> <p>Dimensions 240 x 100 x 40 mm</p> <p></p>

032.233

5/ 5

<p>Hard ceramic block for trueing Japanese waterstones quickly and accurately. The stones are worked wet on the block until plane. Silicon carbide abrasive.</p> <p>Grit 220</p> <p>Dimensions 170 x 55 x 30 mm</p> <p></p>

032.232

5/ 5

<p>Excellent-value set for the precise trueing of waterstones and oil stones. For dressing stones and keeping their surfaces flat.</p> <p>Set includes:</p> <p>Granite stone plate, 280 x 130 x 20 mm, flatness tolerance &lt; 0.1 mm (colour may vary)</p> <p>100 grit wet/dry abrasive paper from Klingspor (20 sheets, 280 x 115 mm)</p> <p>Anti-slip feet for stone plate</p> <p></p>

032.231

5/ 5

<p>Granite stone plate for use in combination with sandpaper for sharpening tool blades or trueing waterstones and oilstones. Anti-slip feet for added stability. Flatness tolerance ± 0.1 mm. Colour may vary.</p> <p>Dimensions 280 x 130 x 20 mm</p> <p></p>

032.226

5/ 5

<p>With this high-quality sharpening stone holder with non-slip rubber feet, you always have a clean and stable workstation - in the sink or on the work table. The stainless steel sharpening stone holder fits a sink width of 330 - 580 mm. Please note the shape and size of your sink before you buy. Clamping jaws for fixing the sharpening stones have a height of 15 mm.</p> <p>Width 135 mm</p> <p>Jaw opening 172-268 mm</p> <p></p>

032.225

5/ 5

<p>Synthetic Nagura stone. Ideal for sharpening stones with a grit of 400/1000/3000/8000 or lower.</p> <p>The Nagura is an optional stone that creates slurry on the sharpening stone. A Nagura ensures that the abrasive particles in the sharpening stone are released more easily and can also be used to give a coarser sharpening stone a finer finish. However, a Nagura not only produces slurry, it is also ideal for use after sharpening, as it is very good for cleaning the stone and removing metal particles that can stick to the sharpening stone and rust. Naniwa's synthetic Naguras are made from aluminium oxide.</p> <p>The stones should be briefly immersed in water before use, but not constantly stored in water.</p> <p>Generally suitable for all waterstones.</p> <p>Dimensions 62 x 33 x 20 mm</p> <p></p>

032.222

5/ 5

<p>With concave and convex surfaces, for gouges. Approx. 145 x Ø 54 x Ø 14 mm. Grit 180: green silicon carbide abrasive.</p> <p>King/Sun Tiger</p> <p>Matsunaga is one of the largest manufacturers of sharpening stones in Japan. In the West, these stones are usually known as King stones or Sun Tiger stones. The stones of the King or Sun Tiger series have a relatively soft bond, which allows the abrasives to be continually exposed during use, making the stone highly effective. These stones are particularly suitable for extremely hard, low-alloy carbon steels (White and Blue Paper Steel). Before use, soak the stones in water for at least 15 minutes. They can also be stored in water permanently. Green silicon carbide abrasive is used for 180 grit. </p> <p></p> <p></p>

032.218

5/ 5

<p>Thicker and longer lasting than the cream-coloured stones, but with equally good honing properties.</p> <p>Belgian Coticule Whetstones</p> <p>The quarrying of Belgian whetstones in the Ardennes is first mentioned in a Roman document. But the story of these natural honing stones goes further back than that. The approx. 480 million-year-old grey yellow sedimentary stones, originating from volcanic ash, are composed of very fine garnet crystals. During honing, these are released from the matrix and, in combination with water and abrasion debris, make a honing paste. The garnets only remove fine shavings from the metal and ensure a good polish. Unique combination of quick abrasive action and grain size.</p> <p>Interesting fact: To produce 1 kg of sharpening stones approx. 1500 kg of cliff must be removed. The thin yellow slices are glued to a slate base and cut to size.</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p></p> <p>Dimensions 100 x 40 x 6 mm</p> <p></p>

032.217

5/ 5

<p>Best quality stones with a high degree of hardness and thus excellent service life.</p> <p>In a wooden case. Flat-pointed straight back, flat-pointed round back, knife-shaped, flat-skewed rounded back. Translucent Arkansas (extra fine).</p> <p>58 x 23 x 6 mm.</p> <p>Arkansas Oil Stones</p> <p>Fine-grained, extremely wear-resistant honing stones, for use with an oil lubricant. Due to their high degree of hardness, they are ideal for polishing curved cutting edges. The sharpening stones we offer have a uniform structure and are crack-free. The black stones are slightly harder than the white stones. They originate from quarries in the Ouachita Mountains in Arkansas (USA), that are almost depleted.</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p> </p> <p>Colour black</p> <p></p>

032.214

5/ 5

<p>The white Arkansas stones have a slightly lower density than the black ones.</p> <p>In a wooden case. Flat-pointed straight back, flat-pointed round back, knife-shaped, flat-skewed rounded back. Translucent Arkansas (extra fine).</p> <p>58 x 23 x 6 mm.</p> <p>Arkansas Oil Stones</p> <p>Fine-grained, extremely wear-resistant honing stones, for use with an oil lubricant. Due to their high degree of hardness, they are ideal for polishing curved cutting edges. The sharpening stones we offer have a uniform structure and are crack-free. The black stones are slightly harder than the white stones. They originate from quarries in the Ouachita Mountains in Arkansas (USA), that are almost depleted.</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p> </p> <p>Colour white</p> <p></p>

032.213

5/ 5

<p>Grit 280 (No. 032.208), grit 1000 (No. 032.209) and grit 3000 (No. 032.210) in a set. White aluminium oxideabrasive.</p> <p>Suehiro</p> <p>The stones from the original Suehiro series have a relatively soft bond and are thus designed for low-alloy carbon steels (Blue and White Paper Steel). The stones should be sprayed with water before use. It is not recommended to keep them in water permanently.</p> <p></p>

032.212

5/ 5

<p>Arkansas stones are available in different hardnesses on the market. They are called Soft, Hard, Hard Black, Surgical, Translucent and differ in grit size. Supplied in a protective cover.</p> <p>Arkansas Oilstones</p> <p>Fine grained, extremely wear-resistant honing stones, for use with an oil lubricant. Due to their high degree of hardness, they are ideal for polishing curved cutting edges. The stones we offer have a uniform structure and are crack-free. They originate from quarries in the Ouachita Mountains in Arkansas (USA).</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p> </p> <p>Form knife-shaped</p> <p>Grit 8000-10 000</p> <p>Dimensions 100 x 50 x 9.5 mm</p> <p></p>

032.206

5/ 5

<p>Arkansas stones are available in different hardnesses on the market. They are called Soft, Hard, Hard Black, Surgical, Translucent and differ in grit size. Supplied in a protective cover.</p> <p>Arkansas Oilstones</p> <p>Fine grained, extremely wear-resistant honing stones, for use with an oil lubricant. Due to their high degree of hardness, they are ideal for polishing curved cutting edges. The stones we offer have a uniform structure and are crack-free. They originate from quarries in the Ouachita Mountains in Arkansas (USA).</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p></p> <p>Form knife-shaped</p> <p>Grit 4000-6000</p> <p>Dimensions 100 x 50 x 9.5 mm</p> <p></p>

032.205

5/ 5

<p>Arkansas stones are available in different hardnesses on the market. They are called Soft, Hard, Hard Black, Surgical, Translucent and differ in grit size. Supplied in a protective cover.</p> <p>Arkansas Oilstones</p> <p>Fine grained, extremely wear-resistant honing stones, for use with an oil lubricant. Due to their high degree of hardness, they are ideal for polishing curved cutting edges. The stones we offer have a uniform structure and are crack-free. They originate from quarries in the Ouachita Mountains in Arkansas (USA).</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p></p> <p>Form knife-shaped</p> <p>Grit 800-1000</p> <p>Dimensions 100 x 50 x 9.5 mm</p> <p></p>

032.204

5/ 5

<p>Arkansas stones are available in different hardnesses on the market. They are called Soft, Hard, Hard Black, Surgical, Translucent and differ in grit size. Supplied in a protective cover.</p> <p>Arkansas Oilstones</p> <p>Fine grained, extremely wear-resistant honing stones, for use with an oil lubricant. Due to their high degree of hardness, they are ideal for polishing curved cutting edges. The stones we offer have a uniform structure and are crack-free. They originate from quarries in the Ouachita Mountains in Arkansas (USA).</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p> </p> <p>Form knife-shaped</p> <p>Grit 400-600</p> <p>Dimensions 100 x 50 x 9.5 mm</p> <p></p>

032.203

5/ 5

<p>The lapping fluid can be used instead of water when working with diamond-coated sharpening systems. The positive properties of the lapping fluid considerably improve the grinding result, reliably prevent rust and corrosion and also have an excellent cleaning effect. </p> <p></p> <p>Hazard statement</p> <p>Causes skin irritation. May cause damage to organs.</p> <p></p>

032.202

5/ 5

<p>Synthetic stone for cleaning and unclogging the surface of sharpening stones and for creating a fine polishing paste.</p> <p>Dimensions 72 x 23 x 19 mm</p> <p></p>

032.201

5/ 5

<p>For shaping and sharpening. 250 grit side green silicon carbide, 1000 grit side aluminium oxide.</p> <p>King/Sun Tiger</p> <p>Matsunaga is one of the largest manufacturers of sharpening stones in Japan. In the West, these stones are usually known as King stones or Sun Tiger stones. The stones of the King or Sun Tiger series have a relatively soft bond, which allows the abrasives to be continually exposed during use, making the stone highly effective. These stones are particularly suitable for extremely hard, low-alloy carbon steels (White and Blue Paper Steel). Before use, soak the stones in water for at least 15 minutes. They can also be stored in water permanently. Green silicon carbide abrasive is used for 180 grit. For all other grits aluminium oxideis used.</p> <p>Grit 250/1000</p> <p>Dimensions 150 x 50 x 25 mm</p> <p></p>

032.198

5/ 5

<p>White aluminium oxideabrasive.</p> <p>Traditional Stone by Naniwa</p> <p>This stone series is suitable for sharpening blunt knives and tool blades. The stone has a relatively hard bond, it therefore stays flat for a longer time. It is ideal for high-alloy tool steels, but also for low-alloy carbon steels. The tool steels made of alloy components with a coarse grain structure (e.g. chromium and vanadium) require a stone that does not wear quickly. Before use, soak the stone for at least 10 minutes. Do not keep it in water permanently.</p> <p>Naniwa has changed the name and the packaging of this sharpening stone series (formerly known as DX Stone). The sharpening stone itself has not been changed.</p> <p>Dimensions 210 x 70 x 20 mm"</p>

032.182

5/ 5

<p>Shaping stone with good sharpening qualities. Silicon carbide abrasive.</p> <p>Traditional Stone by Naniwa</p> <p>This stone series is suitable for sharpening blunt knives and tool blades. The stone has a relatively hard bond, it therefore stays flat for a longer time. It is ideal for high-alloy tool steels, but also for low-alloy carbon steels. The tool steels made of alloy components with a coarse grain structure (e.g. chromium and vanadium) require a stone that does not wear quickly. Before use, soak the stone for at least 10 minutes. Do not keep it in water permanently.</p> <p>Naniwa has changed the name and the packaging of this sharpening stone series (formerly known as DX Stone). The sharpening stone itself has not been changed.</p> <p>Grit 220</p> <p>Dimensions 210 x 70 x 20 mm</p> <p></p>

032.181

5/ 5

<p>Medium-grit lime sandstone from the Kumamoto region for general sharpening. Readily absorbs water, cuts well and easily produces a fine slurry.</p> <p>Japanese Natural Stones</p> <p>""A blade and sharpening stone must be as perfect a match as bride and groom"" according to legendary blacksmith, Shigeoshi Iwasaki. Finding the ideal pairing is no easy task in either case. Despite the excellent performance of synthetic stones, many experienced sharpeners still prefer natural stones for sharpening their finest blades. Japanese sharpening stones are particularly renowned for their effect to harmoniously sharpen hand-forged carbon steels. They can bring a blade’s full potential to the fore and allow the sharpening process itself to become a pleasant ritual. The finest stones from the Honyama quarries are becoming increasingly difficult to acquire - we take great pleasure in still being able to offer these rare treasures. Natural Japanese stones may only be used with water and must be kept protected from frost. Please note that the stones may have slight natural imperfections and may vary somewhat in size.</p> <p> </p> <p>Grit 800-1200</p> <p>Dimensions 220 x 60 x 62 mm</p> <p></p>

032.197

5/ 5

<p>Solid sharpening stone holder, of hard rubber with tempered glass core for secure positioning. Fits Shapton sharpening stones.</p> <p>Dimensions 258 x 85 x 55 mm</p> <p></p>

032.196

5/ 5

<p>The large glass support is warp-free and is framed by a high-quality, soft plastic edge, that preserves sharp tool and knife blades as well as the edges of sharpening stones when touching them. Both materials are also easy to clean.</p> <p>Dimensions 390 x 320 x 52 mm</p> <p></p>

032.194

5/ 5

<p>Very aggressive, hard silicon carbide stone. Also suited for trueing other stones.</p> <p>Suehiro Standard Series</p> <p>The stones from the original Suehiro series have a relatively soft bond and are thus designed for low-alloy carbon steels (Blue and White Paper Steel). The stones should be sprayed with water before use. It is not recommended to keep them in water permanently.</p> <p>Grit 100</p> <p>Dimensions 210 x 55 x 27 mm</p> <p></p>

032.193

5/ 5

<p>Shaping stone with good sharpening qualities. Green silicon carbide abrasive.</p> <p>King/Sun Tiger</p> <p>Matsunaga is one of the largest manufacturers of sharpening stones in Japan. In the West, these stones are usually known as King stones or Sun Tiger stones. The stones of the King or Sun Tiger series have a relatively soft bond, which allows the abrasives to be continually exposed during use, making the stone highly effective. These stones are ideal for extremely hard, low-alloy carbon steels (White and Blue Paper Steel). Before use, soak the stones in water for at least 15 minutes. They can also be stored in water permanently. Green silicon carbide abrasive is used for 180 grit. For all other grits aluminium oxideis used.</p> <p>Grit 240</p> <p>Dimensions 205 x 75 x 50 mm</p> <p></p>

032.189

5/ 5

<p>Shaping stone with good sharpening qualities. Green silicon carbide abrasive.</p> <p>King/Sun Tiger</p> <p>Matsunaga is one of the largest manufacturers of sharpening stones in Japan. In the West, these stones are usually known as King stones or Sun Tiger stones. The stones of the King or Sun Tiger series have a relatively soft bond, which allows the abrasives to be continually exposed during use, making the stone highly effective. These stones are ideal for extremely hard, low-alloy carbon steels (White and Blue Paper Steel). Before use, soak the stones in water for at least 15 minutes. They can also be stored in water permanently. Green silicon carbide abrasive is used for 180 grit. For all other grits aluminium oxideis used.</p> <p>Grit 220</p> <p>Dimensions 205 x 66 x 34 mm</p> <p></p>

032.188

5/ 5

<p>The wooden box provides a convenient and elegant way to store the three Whetstone sharpening blocks that are included with the set and to protect them from damage and dirt. Block size 152 x 50 x 19 mm. Coarse, fine, extra-fine grit. The wooden box is made of cherry tree wood and has non-slip rubber feet.</p> <p>Wooden box 200 x 190 x 40 mm.</p> <p>DMT Diamond Stones</p> <p>The American manufacturer Diamond Machining Technology (DMT) is the founder of interrupted surface technology for diamond sharpening stones, and has been the market leader for diamond-coated sharpening equipment for years. The high-quality sharpening tools are manufactured at the company's headquarters in Massachusetts (USA).</p> <p>Monocrystalline* diamond particles guarantee a long service life and excellent material removal</p> <p>Uniform grit sizes and a dense diamond distribution for even grinding patterns</p> <p>Round recesses prevent clogging due to grinding debris</p> <p>Permanently flat and warp-free thanks to supporting plates made of steel or warp-free plastic with a nickel matrix</p> <p>Colour coding of various grit sizes</p> <p>100 % made in the USA</p> <p>Monocrystalline* diamond-coated sharpening devices:</p> <p>Diamond-coated sharpening devices remain permanently flat, and are especially suitable for tools with straight blades, as well as for producing flat surfaces (e.g. backs of plane and chisel blades, plane soles, scrapers). Also suitable for carbide coated cutters, tool steels, HSS and non-metal materials (glass, ceramic, etc.). We recommend moistening diamond-coated sharpening devices with water and grinding with little pressure.</p> <p>* Monocrystalline diamonds are significantly more wear resistant than the polycrystalline diamonds used to make lower quality diamond sharpening tools.</p> <p></p>

032.187

5/ 5

<p>With two different grits. Ideal grit mix for razors.</p> <p>Super Stone by Naniwa</p> <p>This sharpening stone series is ideal for the final polishing of knife blades. The stones provide a highly polished effect and stay flat for a long time. When sharpening, however, they provide a pleasant feeling as though working on soft natural stones.</p> <p>They are ideal for sharpening extremely hard</p> <p>low-alloy carbon steels(White and Blue Paper Steel).</p> <p>Before use, soak the stone for at least 10 minutes. Do not keep it in water permanently.</p> <p>Naniwa has changed the name and the packaging of this sharpening stone series (formerly Super Stone Series). The sharpening stone itself has not been changed.</p> <p>Grit 3000/10 000</p> <p>Dimensions 210 x 70 x 20 mm</p> <p></p>

032.186

5/ 5

<p>The Super Stone S1 is equivalent to the Super Stone S2. The different name is merely due to the smaller abrasive thickness of 10 mm. This stone series therefore is a reasonably-priced alternative for sharpening jobs where only small material removal is needed, e.g. the sharpening of razors.</p> <p>Super Stone by Naniwa</p> <p>This sharpening stone series is particularly suitable for the final polishing of knife blades. The stones provide a high polishing effect and stay flat for a long time, even though it feels as comfortable as working on soft natural stones. Those series are ideal for sharpening extremely hard low-alloy carbon steels(White and Blue Paper Steel). Before use, soak the stone for at least 10 minutes. Do not keep it in water permanently. White aluminium oxideabrasive.</p> <p>Dimensions 210 x 70 x 10 mm</p> <p></p>

032.174

5/ 5

<p>Queste serie di pietre è particolarmente adatta per la lucidatura finale delle lame dei coltelli. Le pietre offrono un'elevata lucidatura e rimangono a lungo in piano. In fase di affilatura danno una piacevole impressione come se si lavorasse su una pietra naturale morbida.</p> <p>E' perfettamente adatta per acciai al carbonio di bassa lega con elevata durezza (Acciaio Carta Bianco e Blu). Le pietre dovrebbero essere messe in acqua prima dell'uso per almeno 10 minuti, tuttavia non andrebbero custodite di continuo nel bagno d'acqua. Abrasivo, corindone bianco.</p> <p>Dimensioni 210 x 70 x 20 mm</p> <p></p>

032.164

5/ 5

<p>This Japanese waterstone of aluminium oxidehas a hard bond and therefore does not wear quickly. Particularly suited for high-alloy tool steels. Before use, soak the stone in water for approx. 10 minutes. Do not keep it in water permanently.</p> <p>Grit 2000</p> <p>Dimensions 215 x 75 x 50 mm</p> <p></p>

032.160

5/ 5

<p>With two different grits. Comes with Nagura stone. For sharpening.</p> <p>Cerax by Suehiro</p> <p>Cerax is the best-known brand of the Suehiro company. The stones sold under this name have a medium-hard bond and are particularly suitable for high-alloy tool steels but also for low-alloy carbon steels. The coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly. The stone with the base has extra stability and is easy to store. A Nagura stone is used for cleaning and unclogging the surface of the stone and for creating a fine polishing paste. Before use, soak the stones in water for at least 10 minutes, but do not store them in water permanently. White aluminium oxideabrasive.</p> <p>Grit 1000/3000</p> <p>Dimensions 183 x 63 x 32 mm</p> <p>Base with base</p> <p></p>

032.157

5/ 5

<p>With two different grits. Comes with Nagura stone. For sharpening.</p> <p>Cerax by Suehiro</p> <p>Cerax is the best-known brand of the Suehiro company. The stones sold under this name have a medium-hard bond and are particularly suitable for high-alloy tool steels but also for low-alloy carbon steels. The coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly. The stone with the base has extra stability and is easy to store. A Nagura stone is used for cleaning and unclogging the surface of the stone and for creating a fine polishing paste. Before use, soak the stones in water for at least 10 minutes, but do not store them in water permanently. White aluminium oxideabrasive.</p> <p>Grit 1000/3000</p> <p>Dimensions 183 x 63 x 32 mm</p> <p>without base</p> <p></p>

032.156

5/ 5

<p>Vegetable-tanned kangaroo leather is softer and therefore more flexible, which is ideal for sharpening razor cutting edges.</p> <p>Leather honing strop block for honing tool, knife and razor blades. After honing on benchstones, we recommend stropping on leather for ultra-sharp edges. Can be used with or without sharpening paste.</p> <p>Dimensions 210 x 70 x 20 mm</p> <p></p>

032.144

5/ 5

<p>The underside of the vegetable-tanned cowhide is softer and therefore ideal for polishing light contours or serrations on tool and knife edges.</p> <p>Leather honing strop block for honing tool, knife and razor blades. After honing on benchstones, we recommend stropping on leather for ultra-sharp edges. Can be used with or without sharpening paste.</p> <p>Dimensions 210 x 70 x 20 mm</p> <p></p>

032.145

5/ 5

<p>The harder upper side of vegetable-tanned cowhide is ideal for sharpening tool and knife cutting edges.</p> <p>Leather honing strop block for honing tool, knife and razor blades. After honing on benchstones, we recommend stropping on leather for ultra-sharp edges. Can be used with or without sharpening paste.</p> <p>Dimensions 210 x 70 x 20 mm</p> <p></p>

032.143

5/ 5

<p>Developed primarily for modern tool steels with high carbon content (e.g. O1) and exotic steel alloys used by premium tool manufacturers. In our tests, the stone series achieved unrivalled results especially with HSS. The stones consist mainly of extremely abrasion-resistant aluminium oxides of German production. The stone provides very fast material removal and has a hard bond; it therefore stays flat for a long time. The stones should be soaked in water for at least 15 minutes before use and can be stored in water permanently. Made in the USA.</p> <p>Dimensions 203 x 76 x 25 mm</p> <p></p>

032.140

5/ 5

<p>Aluminium oxide abrasive.</p> <p>Kunsuto Oilstones</p> <p>These stones were developed to offer a complete series of sharpening oilstones for sculpting gouges and chisels. Until now, only coarse synthetic oilstones (Norton India) and Arkansas natural stones with very fine grit were available on the market in good quality. The Kunsuto sharpening stones close this gap and allow a continuous sharpening process with oilstones of grit 220 and 1000 (Norton India), the medium grits 2000 and 4000 for shaping the cutting edge (Kunsuto), and the Arkansas natural stone. The development process of the stones made in Germany was supported by microscope images of the cutting edges after sharpening. Pre-soaked with oil in the factory, it comes ready for use.</p> <p>Grit 2000</p> <p>Dimensions 200 x 50 x 25 mm</p> <p></p>

032.136

5/ 5

<p>Aluminium oxide abrasive.</p> <p>Kunsuto Oilstones</p> <p>These stones were developed to offer a complete series of sharpening oilstones for sculpting gouges and chisels. Until now, only coarse synthetic oilstones (Norton India) and Arkansas natural stones with very fine grit were available on the market in good quality. The Kunsuto sharpening stones close this gap and allow a continuous sharpening process with oilstones of grit 220 and 1000 (Norton India), the medium grits 2000 and 4000 for shaping the cutting edge (Kunsuto), and up to the Arkansas natural stone. The development process of the stones made in Germany was supported by microscope images of the cutting edges after sharpening. Pre-soaked with oil in the factory, it comes ready for use.</p> <p>Grit 2000/4000</p> <p>Dimensions 200 x 50 x 25 mm"</p>

032.135

5/ 5

<p>Aluminium oxide abrasive.</p> <p>Kunsuto Oilstones</p> <p>These stones were developed to offer a complete series of sharpening oilstones for sculpting gouges and chisels. Until now, only coarse synthetic oilstones (Norton India) and Arkansas natural stones with very fine grit were available on the market in good quality. The Kunsuto sharpening stones close this gap and allow a continuous sharpening process with oilstones of grit 220 and 1000 (Norton India), the medium grits 2000 and 4000 for shaping the cutting edge (Kunsuto), and up to the Arkansas natural stone. The development process of the stones made in Germany was supported by microscope images of the cutting edges after sharpening. Pre-soaked with oil in the factory, it comes ready for use.</p> <p>Grit 4000</p> <p>Dimensions 200 x 50 x 25 mm</p> <p></p>

032.134

5/ 5

<p>Per affilare coltelli e utensili. Fornito in scatola di legno.</p> <p>Pietre diamantate DMT</p> <p>Il produttore americano Diamond Machining Technology (DMT) è inventore della superficie interrotta di affilatura diamantata e leader da anni sul mercato di mezzi di affilatura tempestati di diamanti. I mezzi di affilatura di alta qualità vengono realizzati nella sede del Massachusetts (USA).</p> <p>Le particelle di diamante monocristalline garantiscono lunga durata e una buona asportazione di materiale</p> <p>Granulometria uniforme ed una distribuzione di diamanti densa per micrografie uniformi</p> <p>Le rientranze rotonde evitano intasamenti con rimozione del materiale abrasivo</p> <p>Piastre portanti in acciaio con matrice di acciaio inox lappate nello specifico in modo permanente in piano e senza deformazioni</p> <p>Codifica del colore per le diverse granulometrie</p> <p>Realizzato al 100 % negli Stati Uniti</p> <p>Abrasivi diamantati monocristallini*:</p> <p>Poiché i mezzi di affilatura con rivestimento diamantato rimangono permanentemente in piano, sono particolarmente adatti per gli utensili con taglienti dritti, nonché per la produzione di superfici piane (per es. lati speculari di ferri per pialle e scalpelli, suole di pialle, rasiere). Adatto anche per frese rivestite in carburo, acciai per utensili, HSS e materiali non metallurgici (vetro, ceramica, ecc.). Si consiglia di umettare i mezzi di affilatura diamantati con acqua e levigare con poca pressione.</p> <p>* I diamanti monocristallini sono molto più stabili dei policristallini, che vengono utilizzati su utensili di taglio di qualità inferiore.</p> <p> </p> <p>Dimensioni 152 x 50 x 19 mm</p> <p></p>

032.130

5/ 5

<p>Hibiki Stone by Naniwa</p> <p>This stone series is especially suitable for sharpening tool blades as well as for honing the back, e.g. on chisels or plane blades. Thanks to its particularly hard bond, the stone remains flat for a longer time. These stones are ideal for extremely hard, low-alloy carbon steels (White and Blue Paper Steel). Before use, soak the stones in water for at least 10 minutes. It is not recommended to keep them in water permanently.</p> <p>Grit 3000</p> <p>Dimensions 206 x 70 x 20 mm</p> <p></p>

032.129

5/ 5

<p>White aluminium oxideabrasive.</p> <p>Hibiki Stone by Naniwa</p> <p>This stone series is especially suitable for sharpening tool blades as well as for honing the back, e.g. on chisels or plane blades. Thanks to its particularly hard bond, the stone remains flat for a longer time. These stones are ideal for extremely hard, low-alloy carbon steels (White and Blue Paper Steel). Before use, soak the stones in water for at least 10 minutes. It is not recommended to keep them in water permanently.</p> <p>Grit 1000</p> <p>Dimensions 210 x 70 x 20 mm</p> <p></p>

032.128

5/ 5

<p>Specially designed for modern tool steels with a high carbon content (e.g. O1) and exotic steel alloys produced by premium tool makers. The tests that we performed on this stone series show unbeatable results, especially with HSS. The stone contains mainly extremely abrasion-resistant aluminum oxides made in Germany. It removes material quickly and has a hard bond, so it stays flat for a long time. Before use, soak the stone for at least 15 minutes. Can be permanently stored in water. Made in USA.</p> <p>Dimensions 203 x 76 x 25 mm</p> <p></p>

032.120

5/ 5

<p>With two different grits. For sharpening and finishing.</p> <p>Sharpening Stone/Specialty Stone by Naniwa</p> <p>This sharpening stone series is particularly suitable for the final polishing of knife blades. The stones provide a high polishing effect and stay flat for a long time, even though it feels as comfortable as working on soft natural stones. Those series are ideal for sharpening extremely hard low-alloy carbon steels(White and Blue Paper Steel). Before use, soak the stone for at least 10 minutes. Do not keep it in water permanently. White aluminium oxideabrasive.</p> <p>Naniwa has changed the name and the packaging of this sharpening stone series (formerly Super Stone Series). The sharpening stone itself has not been changed.</p> <p>Dimensions 210 x 70 x 20 mm</p> <p></p>

032.117

5/ 5

<p>Coarse-grained stone for material removal, repairs, removing nicks, changing the bevel angle, removing corrosion. Silicon carbide abrasive.</p> <p>Kunsuto Sharpening Stone Series</p> <p>This stone series was developed in cooperation with a Japanese sharpening stone expert. The aim was to create a Japanese stone series suitable for both high-alloy tool steels and low-alloy carbon steels. The numerous tests were supported by microscopic images of the cutting edges after sharpening. This stone series has a medium-hard bond, which does not wear out quickly even with tool steels made of alloy components with a coarse grain structure (e.g. chromium and vanadium). However, both steel types allow good material removal with a pleasant ease of use. The microscopic images show a harmonious surface and a precise cutting edge form for both types of steel.</p> <p>Before use, soak the stone for at least 10 minutes. Do not keep it in water permanently.</p> <p></p> <p>Grit 220</p> <p>Dimensions 205 x 78 x 35 mm</p> <p></p>

032.115

5/ 5

<p>Very fine Japanese natural sharpening stone that is cultivated on the seabed (region Tsushima-Nagasaki). This natural sharpening stone cuts well and produces very little slurry. Also suitable for cleaning the structure of sharpening stones and creating a fine polishing paste. Do not keep it in water permanently.</p> <p>Japanese Natural Stones</p> <p>""A blade and sharpening stone must be as perfect a match as bride and groom"" according to legendary blacksmith, Shigeoshi Iwasaki. Finding the ideal pairing is no easy task in either case. Despite the excellent performance of synthetic stones, many experienced sharpeners still prefer natural stones for sharpening their finest blades. Japanese sharpening stones are particularly renowned for their ability to harmoniously sharpen hand-forged carbon steels. They can bring a blade’s full potential to the fore and allow the sharpening process itself to become a pleasant ritual. The finest stones from the Honyama quarries are becoming increasingly difficult to acquire - we take great pleasure in still being able to offer these rare treasures. Natural Japanese stones may only be used with water and must be kept protected from frost. Please note that the stones may have slight natural imperfections and may vary somewhat in size.</p> <p> </p> <p>Grit 3000-5000</p> <p>Dimensions 180 x 55 x 50 mm</p> <p></p>

032.112

5/ 5

<p>This sharpening stone is thicker than the standard version with a longer service life. Comes with plastic case.</p> <p>Glass Stones by Shapton</p> <p>The premium range from Japanese company Shapton is the ""Glass Stone"" series. The sharpening particles are highly pure and homogeneous. This is noticeable when changing to finer grits: the traces from the previous grit are quickly ground out. A special bond allows quick sharpening on a flat surface. The sharpening stone has a base of tempered glass and is thus 100 % warp-free. Conventional sharpening stones may warp microscopically by absorbing water, but Shapton stones solve this problem with their extremely flat base of tempered glass.</p> <p>Another advantage of the glass base is that the grit rating on the underside is always visible even after much use. Before use, spray the stones with water. It is not recommended to keep them in water permanently. White aluminium oxideabrasive.</p> <p> </p> <p>Grit 500</p> <p>Dimensions 210 x 70 x 15 mm</p> <p>Abrasive thickness 10 mm</p> <p></p>

032.111

5/ 5

<p>The gentle, highly pure aluminium oxideused for manufacturing this stone is much finer than the abrasives of other synthetic oilstones. Additionally, the stone is highly effective and does not clog too quickly. Pre-soaked with oil in the factory, it comes ready for use.</p> <p>Dimensions 203 x 51 x 25 mm</p> <p></p>

032.110

5/ 5

<p>Materiale plastico robusto, base con impugnatura, piedini in gomma antiscivolo.</p> <p>Pietre diamantate DMT</p> <p>Il produttore americano Diamond Machining Technology (DMT) è inventore della superficie interrotta di affilatura diamantata e leader da anni sul mercato di mezzi di affilatura tempestati di diamanti. I mezzi di affilatura di alta qualità vengono realizzati nella sede del Massachusetts (USA).</p> <p>Le particelle di diamante monocristalline garantiscono lunga durata e una buona asportazione di materiale</p> <p>Granulometria uniforme ed una distribuzione di diamanti densa per micrografie uniformi</p> <p>Le rientranze rotonde evitano intasamenti con rimozione del materiale abrasivo</p> <p>Piastre portanti in acciaio con matrice di acciaio inox lappate nello specifico in modo permanente in piano e senza deformazioni</p> <p>Codifica del colore per le diverse granulometrie</p> <p>Realizzato al 100 % negli Stati Uniti</p> <p>Abrasivi diamantati monocristallini*:</p> <p>Poiché i mezzi di affilatura con rivestimento diamantato rimangono permanentemente in piano, sono particolarmente adatti per gli utensili con taglienti dritti, nonché per la produzione di superfici piane (per es. lati speculari di ferri per pialle e scalpelli, suole di pialle, rasiere). Adatto anche per frese rivestite in carburo, acciai per utensili, HSS e materiali non metallurgici (vetro, ceramica, ecc.). Si consiglia di umettare i mezzi di affilatura diamantati con acqua e levigare con poca pressione.</p> <p>* I diamanti monocristallini sono molto più stabili dei policristallini, che vengono utilizzati su utensili di taglio di qualità inferiore.</p> <p> </p> <p>Dimensioni 311 x 117 x 57 m</p> <p></p>

032.108

5/ 5

<p>Continuous surface diamond coating on compact base plate. Ideal for pointed tools or accurately trueing the backs of tools (extraordinary flatness). Rubber feet.</p> <p>DMT Diamond Stones</p> <p>The American manufacturer Diamond Machining Technology (DMT) is the founder of interrupted surface technology for diamond sharpening stones, and has been the market leader for diamond-coated sharpening equipment for years. The high-quality sharpening tools are manufactured at the company's headquarters in Massachusetts (USA).</p> <p>Monocrystalline* diamond particles guarantee a long service life and excellent material removal</p> <p>Uniform grit sizes and a dense diamond distribution for even grinding patterns</p> <p>Round recesses prevent clogging due to grinding debris</p> <p>Permanently flat and warp-free thanks to supporting plates made of steel or warp-free plastic with a nickel matrix</p> <p>Colour coding of various grit sizes</p> <p>100 % made in the USA</p> <p>Monocrystalline* diamond-coated sharpening devices:</p> <p>Diamond-coated sharpening devices remain permanently flat, and are especially suitable for tools with straight blades, as well as for producing flat surfaces (e.g. backs of plane and chisel blades, plane soles, scrapers). Also suitable for carbide coated cutters, tool steels, HSS and non-metal materials (glass, ceramic, etc.). We recommend moistening diamond-coated sharpening devices with water and grinding with little pressure.</p> <p>* Monocrystalline diamonds are significantly more wear resistant than the polycrystalline diamonds used to make lower quality diamond sharpening tools.</p> <p> </p> <p></p> <p></p>

032.100

5/ 5

<p>Thicker and longer lasting than the cream-coloured stones, but with equally good honing properties.</p> <p>Belgian Coticule Whetstones</p> <p>The quarrying of Belgian whetstones in the Ardennes is first mentioned in a Roman document. But the story of these natural honing stones goes further back than that. The approx. 480 million-year-old grey yellow sedimentary stones, originating from volcanic ash, are composed of very fine garnet crystals. During honing, these are released from the matrix and, in combination with water and abrasion debris, make a honing paste. The garnets only remove fine shavings from the metal and ensure a good polish. Unique combination of quick abrasive action and grain size.</p> <p>Interesting fact: To produce 1 kg of sharpening stones approx. 1500 kg of cliff must be removed. The thin yellow slices are glued to a slate base and cut to size.</p> <p>Qualität von Natursteinen</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p></p> <p>Grit 6000-8000</p> <p>Dimensions 250 x 60 x 13 mm</p> <p></p>

032.099

5/ 5

<p>Bench stone with two opposing plates with different grits. Ideal for trueing and for sharpening cutting tools. Includes two magnetic, rubber coated stone holders, cleaning block and storage pouch.</p> <p>M. Power Tools DC Diamond Stones</p> <p>Diamond Cross (DC) sharpening stones offer an excellent price/performance ratio with a high manufacturing quality. The lapping of the supporting plates and the stringent quality controls are performed at the company's headquarters in England.</p> <p>Monocrystalline* diamond particles guarantee a long service life and excellent material removal</p> <p>Uniform grit sizes and a dense diamond distribution for even grinding patterns</p> <p>Wave-shaped recesses prevent clogging due to grinding debris</p> <p>Permanently flat and warp-free thanks to specially lapped supporting plates made of steel with a stainless steel matrix</p> <p>Monocrystalline* diamond-coated sharpening devices:</p> <p>Diamond-coated sharpening devices remain permanently flat, and are especially suitable for tools with straight blades, as well as for producing flat surfaces (e.g. backs of plane and chisel blades, plane soles, scrapers). Also suitable for carbide coated cutters, tool steels, HSS and non-metal materials (glass, ceramic, etc.). We recommend moistening diamond-coated sharpening devices with water and grinding with little pressure.</p> <p>* Monocrystalline diamonds are significantly more wear resistant than the polycrystalline diamonds used to make lower quality diamond sharpening tools.</p> <p></p> <p>Grit extra-fine/coarse</p> <p>Dimensions 203 x 70 x 7 mm</p> <p></p>

032.098

5/ 5

<p>The extremely high density of abrasive grains in this stone series enables rapid material removal. The hard magnesium bond also keeps the stone flat for a very long time - making it ideal for kitchen knives, razors and all low-alloy carbon steels with high hardness (White and Blue Paper Steel).</p> <p>Thanks to this bond, the stone reacts more sensitively to prolonged exposure to water - therefore only soak for max. 5 minutes before use!</p> <p>Dimensions 210 x 70 x 20 mm</p> <p></p>

032.090

5/ 5

<p>Shaping stone with good sharpening qualities. Green silicon carbide abrasive.</p> <p>King/Sun Tiger</p> <p>Matsunaga is one of the largest manufacturers of sharpening stones in Japan. In the West, these stones are usually known as King stones or Sun Tiger stones. The stones of the King or Sun Tiger series have a relatively soft bond, which allows the abrasives to be continually exposed during use, making the stone highly effective. These stones are particularly suitable for extremely hard, low-alloy carbon steels (White and Blue Paper Steel). Before use, soak the stones in water for at least 15 minutes. They can also be stored in water permanently. Green silicon carbide abrasive is used for 180 grit. For all other grits aluminium oxideis used.</p> <p>Grit 220</p> <p>Dimensions 185 x 63 x 25 mm</p> <p></p>

032.089

5/ 5

<p>Arkansas stones are available in different hardnesses on the market. They are called Soft, Hard, Hard Black, Surgical and Translucent and differ in grit size.</p> <p>Arkansas Oilstones</p> <p>Fine grained, extremely wear-resistant honing stones, for use with an oil lubricant. Due to their high degree of hardness, they are ideal for polishing curved cutting edges. The stones we offer have a uniform structure and are crack-free. They originate from quarries in the Ouachita Mountains in Arkansas (USA).</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p> </p> <p>Grit 8000-10 000</p> <p>Dimensions 205 x 50 x 13 mm</p>

032.086

5/ 5

<p>Arkansas stones are available in different hardnesses on the market. They are called Soft, Hard, Hard Black, Surgical and Translucent and differ in grit size.</p> <p>Arkansas Oilstones</p> <p>Fine grained, extremely wear-resistant honing stones, for use with an oil lubricant. Due to their high degree of hardness, they are ideal for polishing curved cutting edges. The stones we offer have a uniform structure and are crack-free. They originate from quarries in the Ouachita Mountains in Arkansas (USA).</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p> </p> <p>Grit 6000-8000</p> <p>Dimensions 200 x 48 x 20 mm</p> <p></p>

032.085

5/ 5

<p>Arkansas stones are available in different hardnesses on the market. They are called Soft, Hard, Hard Black, Surgical and Translucent and differ in grit size.</p> <p>Arkansas Oilstones</p> <p>Fine grained, extremely wear-resistant honing stones, for use with an oil lubricant. Due to their high degree of hardness, they are ideal for polishing curved cutting edges. The stones we offer have a uniform structure and are crack-free. They originate from quarries in the Ouachita Mountains in Arkansas (USA).</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p></p> <p>Grit 6000-8000</p> <p>Dimensions 150 x 48 x 20 mm</p> <p></p>

032.084

5/ 5

<p>Arkansas stones are available in different hardnesses on the market. They are called Soft, Hard, Hard Black, Surgical and Translucent and differ in grit size.</p> <p>Arkansas Oilstones</p> <p>Fine grained, extremely wear-resistant honing stones, for use with an oil lubricant. Due to their high degree of hardness, they are ideal for polishing curved cutting edges. The stones we offer have a uniform structure and are crack-free. They originate from quarries in the Ouachita Mountains in Arkansas (USA).</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p></p> <p>Grit 4000-6000</p> <p>Dimensions 205 x 50 x 13 mm</p> <p></p>

032.083

5/ 5

<p>Arkansas stones are available in different hardnesses on the market. They are called Soft, Hard, Hard Black, Surgical and Translucent and differ in grit size.</p> <p>Arkansas Oilstones</p> <p>Fine grained, extremely wear-resistant honing stones, for use with an oil lubricant. Due to their high degree of hardness, they are ideal for polishing curved cutting edges. The stones we offer have a uniform structure and are crack-free. They originate from quarries in the Ouachita Mountains in Arkansas (USA).</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p></p> <p>Grit 2000-3000</p> <p>Dimensions 205 x 50 x 13 mm</p> <p></p>

032.082

5/ 5

<p>Arkansas stones are available in different hardnesses on the market. They are called Soft, Hard, Hard Black, Surgical and Translucent and differ in grit size.</p> <p>Arkansas Oilstones</p> <p>Fine grained, extremely wear-resistant honing stones, for use with an oil lubricant. Due to their high degree of hardness, they are ideal for polishing curved cutting edges. The stones we offer have a uniform structure and are crack-free. They originate from quarries in the Ouachita Mountains in Arkansas (USA).</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p> </p> <p>Grit 800-1000</p> <p>Dimensions 205 x 50 x 13 mm</p> <p></p>

032.081

5/ 5

<p>Arkansas stones are available in different hardnesses on the market. They are called Soft, Hard, Hard Black, Surgical and Translucent and differ in grit size.</p> <p>Arkansas Oilstones</p> <p>Fine grained, extremely wear-resistant honing stones, for use with an oil lubricant. Due to their high degree of hardness, they are ideal for polishing curved cutting edges. The stones we offer have a uniform structure and are crack-free. They originate from quarries in the Ouachita Mountains in Arkansas (USA).</p> <p>Quality of Natural Stones</p> <p>For many years, the Belgian coticule and Arkansas stones have been synonymous with high-quality whetstones. But these stones are natural products. Due to limited resources, the quality of these stones may increasingly vary. Japanese waterstones with fine grain structures are recommended as an alternative.</p> <p></p> <p>Grit 400-600</p> <p>Dimensions 205 x 50 x 13 mm</p> <p></p>

032.080

5/ 5

<p>All metal parts made of stainless steel</p> <p>Non-slip rubber clamping jaws</p> <p>Mid-mounted support bracket for thin stones</p> <p>Extra-large rest area</p> <p>High rest for more free space when sharpening</p> <p>Width 75 mm</p> <p>Jaw opening 135-220 mm</p> <p>Support height 32 mm</p> <p></p>

032.070

5/ 5

032.069

5/ 5

<p>A high-precision guide for accurate and consistent perpendicular sharpening of all straight-edged blades. Also suitable for short, irregular and tapered Japanese blades. The adjustable brass roller allows for increasing the angle of inclination by up to 2° when creating a micro bevel without unclamping the tool. Aluminium body, easy-gliding brass roller. Quickly adjustable gauge with grip. Instructions included.</p> <p>Bevel angle 15°-54°, counter chamfer 10°-20°.</p> <p>Max. blade width 72 mm</p> <p>Max. blade thickness 12 mm</p> <p></p>

032.059

5/ 5

<p>This hard-bond stone is suitable for pre-sharpening double-layered blades as well as chrome-vanadium steel and HSS.</p> <p>Fits models 2000-2006, T-7, and T-8.</p> <p>Centre hole 12 mm</p> <p>Grit 220</p> <p>Ø 250 mm</p> <p>Width 50 mm</p> <p></p>

032.030

5/ 5

<p>For the diamond stone dresser.</p> <p>Grinding jigs and accessories are suitable for all models (T-3, T-4, T-7 and T-8) unless otherwise noted.</p> <p></p>

032.028

5/ 5

<p>For regrading and dressing Tormek sharpening stones.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p></p>

032.027

5/ 5

<p>For setting the grinding angle and checking the bevel geometry.</p> <p>Grinding jigs and accessories are suitable for all models (T-3, T-4, T-7 and T-8) unless otherwise noted.</p> <p></p>

032.025

5/ 5

<p>Sharpening the complex tip geometry of a drill by hand requires plenty of practice. Using the Tormek drill bit sharpener attachment, you can now sharpen a 4-facet drill bit with the usual wet working sharpening method on your drill for maximum precision and service life. The optimum point and clearance angles can be set for any drilling operation with regard to the size of the drill and the material to be worked on. Even drills which are completely blunt and have their tips broken off can be returned to the perfect shape through sharpening. Point angles 90-150°.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p>Ø 3-22 mm</p> <p></p>

032.021

5/ 5

<p>For leather honing wheels</p> <p>70 g.</p> <p></p>

032.020

5/ 5

<p>Blade length min. 160 mm.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p>Model SVM-140</p> <p>Width 140 mm</p> <p></p>

032.018

5/ 5

<p>For blades of any length, minimum blade width 13 mm.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p></p>

032.015

5/ 5

<p>For short gouges and V-blades. Blade length min. 45 mm, blade width max. 38 mm.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p></p>

032.013

5/ 5

<p>Blade length min. 60 mm.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p>Model SVM-45</p> <p>Width 45 mm</p> <p></p>

032.011

5/ 5

<p>TORMEK T-8 Original takes precision and stability to a completely new level. The new design integrates the previously mounted sleeves for the vertical and horizontal support into the revolutionary fully cast top and frame. The enhanced stability optimizes jig guidance and thus the sharpening accuracy.</p> <p>""Tormek Original"" sharpening wheel (SG-250), aluminium oxide, Ø 250 x 50 mm, grit 220; leather honing wheel, Ø 215 x 30 mm; universal support, finely adjustable (can be used horizontally or vertically). 230 V, 200 W, 90 rpm, torque 14.7 Nm, 14.8 kg.</p> <p>Includes:</p> <p>Square Edge Jig (SE-77)</p> <p>Adjustable Trueing Tool (TT-50)</p> <p>Stone Grader (SP-650)</p> <p>Pro Angle Master (WM-200)</p> <p>Honing Compound (PA-70)</p> <p>Handbook (HB-10)</p> <p>Instruction Video (DVD-1)</p> <p>Edge Marker (EM-15)</p> <p>Voucher for free participation in a one-day workshop of your choice or a discount of €100 for a multi-day workshop.</p> <p>Comes with Tormek manual in German language.</p> <p>Tormek Sharpening System</p> <p>Proven for many years and constantly perfected wet working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.</p> <p>The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The offset front end can also be used for flat honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.</p> <p>A summary of the advantages of Tormek sharpening machines</p> <p>Longer working life of T-8 and T-4 Original:</p> <p>Stainless steel spindle with EzyLock-System for easier stone assembling</p> <p>Solid zinc cast housing with integrated vertical and horizontal support</p> <p>Better motor insulation</p> <p></p> <p>Additional advantages of T-8 Original:</p> <p>Electrophoretic dip painted casing, zinc cast housing frame and robust ABS plastic sides for better corrosion protection</p> <p>Silent running, maintenance free motor, designed for continuous operation, 25 000 hour life</p> <p>Improved water container with screw lift for easy positioning, overspill rim, drip-off plate, magnetic swarf collector and magnetic cleaning scraper</p> <p></p>

032.010

5/ 5

<p class="MsoNormal">NEW! Ultimate precision, solid zinc-cast top</p> <p class="MsoNormal">The TORMEK T-4 Original, an advanced version of the T-3 model, takes precision and stability to a new level. Both the vertical and horizontal bases for the universal support and the integrated carrying handle are made in the same zinc casting and therefore permanently joined together. The motor and main shaft are fixed to the cast top, resulting in a solid construction which significantly improves accuracy during sharpening.</p> <p class="MsoNormal">""Tormek Original"" sharpening wheel, grit 220, Ø 200 x 40 mm; leather honing wheel Ø 145 x 26 mm; solid zinc casting top with universal support with fine adjustment (horizontal and vertical settings). Impact-resistant ABS plastic housing. 230 V, 120 W, 120 rpm, 8 kg.</p> <p class="MsoNormal">Includes:</p> <p class="MsoNormal">Stone grader (SP-650)</p> <p class="MsoNormal">Pro Angle Master (WM-200)</p> <p class="MsoNormal">Honing compound (PA-70)</p> <p class="MsoNormal">Handbook (HB-10)</p> <p class="MsoNormal">Instruction video (DVD-1)</p> <p class="MsoNormal">Edge marker (EM-15)</p> <p class="MsoNormal">Voucher for free participation in a one-day workshop of your choice or a discount of €100 for a multi-day workshop</p> <p class="MsoNormal">Comes with Tormek manual in German language.</p> <p class="MsoNormal">Tormek Sharpening System</p> <p class="MsoNormal">Proven for many years and constantly perfected wet working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.</p> <p class="MsoNormal">The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The offset front end can also be used for flat honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.</p> <p class="MsoNormal">A summary of the advantages of Tormek sharpening machines</p> <p class="MsoNormal">Longer working life of T-8 and T-4 Original:</p> <p class="MsoNormal">Stainless steel spindle with EzyLock-System for easier stone assembling</p> <p class="MsoNormal">Solid zinc cast housing with integrated vertical and horizontal support</p> <p class="MsoNormal">Better motor insulation</p> <p class="MsoNormal"></p> <p class="MsoNormal">Additional advantages of T-8 Original:</p> <p class="MsoNormal">Electrophoretic dip painted casing, zinc cast housing frame and robust ABS plastic sides for better corrosion protection</p> <p class="MsoNormal">Silent running, maintenance free motor, designed for continuous operation, 25 000 hour life</p> <p class="MsoNormal">Improved water container with screw lift for easy positioning, overspill rim, drip-off plate, magnetic swarf collector and magnetic cleaning scraper</p> <p></p> <p></p>

032.007

5/ 5

<p>For plane blades and paring chisels. Also suitable for Japanese chisels. Slightly convex cutting shapes can also be sharpened using two setting wheels (included with T-8).</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p></p>

032.009

5/ 5

<p class="MsoNormal"><span lang="en-us" xml:lang="en-us">For honing and polishing the inside of turning tools, gouges and V-shaped tools, interchangeable wheels.</span></p> <p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</span></p> <p></p>

032.006

5/ 5

<p>For hollow gouges and turning tools, as well as interchangeable cutters for hollowing tools etc., up to 36 mm wide. Adjustable in cutting angle and shape. With the SVD-186 R Gouge Jig, you will get an exact replication of both the shape and edge angle on your bowl gouges and spindle gouges, so you can be sure that the tool will behave in the same predictable way on the lathe after every sharpening. Used correctly and together with your Tormek tool sharpener, there is no alternative method that can give you faster or sharper results.</p> <p>The jig can be set for various lengths of the side bevel. Mount your cutter onto the special shaft that is included with the jig, and you get a controlled sharpening.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p></p>

032.008

5/ 5

<p><span lang="en-us" style="font-size:11pt;line-height:107%;font-family:Calibri, 'sans-serif';" xml:lang="en-us">This large flattening (truing) stone is ideal for flattening the surface of sharpening stones that have become dished or have developed grooves. The flattening block comes with removable rubber feet to stop it from sliding around during the flattening process</span></p>

032.005

5/ 5

<p class="MsoNormal"><span lang="en-us" xml:lang="en-us">Aluminium oxide abrasive.</span></p> <p></p> <p><span lang="en-us" style="font-size:11pt;line-height:107%;font-family:Calibri, 'sans-serif';" xml:lang="en-us">Matsunaga is one of the largest manufacturers of sharpening stones in Japan. These stones are usually known as King stones or Sun Tiger stones. The stones of the King or Sun Tiger series have a relatively soft bond, which allows the abrasives to be constantly exposed during use, making the stone highly effective. These stones are especially suitable for extremely hard, low-alloy carbon steels (White and Blue Paper Steel). Before use, soak the stones in water for at least 15 minutes. They can also be stored in water permanently.</span></p>

032.002

5/ 5

<p class="MsoNormal"><span lang="en-us" xml:lang="en-us">Aluminium oxide abrasive.</span></p> <p></p> <p><span lang="en-us" style="font-size:11pt;line-height:107%;font-family:Calibri, 'sans-serif';" xml:lang="en-us">Matsunaga is one of the largest manufacturers of sharpening stones in Japan. These stones are usually known as King stones or Sun Tiger stones. The stones of the King or Sun Tiger series have a relatively soft bond, which allows the abrasives to be constantly exposed during use, making the stone highly effective. These stones are especially suitable for extremely hard, low-alloy carbon steels (White and Blue Paper Steel). Before use, soak the stones in water for at least 15 minutes. They can also be stored in water permanently</span></p>

032.001

5/ 5

<p>The CORRADI brush for cleaning the teeth of files and rasps is an essential tool for keeping these tools in excellent condition. Made of beech wood, this brush has a smooth and pleasant finish to the touch.</p> <p>Its primary function is to remove wood debris and other impurities that accumulate on the teeth of files and rasps during their use. The brush has an ergonomic design, with a comfortable handle that allows for easy and precise use.</p> <p>The teeth of the brush are made of steel on the file's side and nylon on the side for rasps, ensuring long-lasting durability and resistance to wear. Thanks to its effectiveness in cleaning the teeth of files and rasps, the CORRADI brush is an excellent choice for woodworking professionals and hobbyists who are looking for a high-quality tool for maintaining their equipment.</p> <p>Head 40 x 100 mm.</p> <p>Lenght 250 mm</p>

024.253

5/ 5

<p>MADE OF THE FINEST STEEL IN GERMANY</p> <p></p> <p>This burnisher is of the finest German quality with a natural Oak handle, steel ferrule and a properly hardened and tempered steel blade. Overall length of tool is 245mm Blade diameter: 10 mm</p> <p>Blade length: 133 mm</p> <p>Overall length: 245 mm</p>

027.023

5/ 5

<p>For cleaning files teeth. Beechwood with steel bristles.</p> <p>Head 40 x 100 mm.</p> <p>Length 250 mm</p>

024.241

5/ 5

<p>With thin spray jet, thus allowing accurate application.</p> <p>Versatile, light oil from the seeds of the camellia tree:</p> <p>Corrosion protection: Camellia oil is acid-free, non-volatile and not susceptible to resinification, making it the ideal oil to protect tools from rust. Made from pure natural plant products and food safe, it is ideal for preserving kitchen knives made of carbon steel.</p> <p>Wood protection: When applied to wooden surfaces, it is absorbed quickly due to its low viscosity. Once absorbed, it helps protect the wood from damage by moisture, dirt and UV light. Clear, not discolouring, it emphasizes the wood’s natural beauty. Non-hardening.</p> <p>Body care: Camellia oil makes an excellent base for the preparation of lotions, creams and soaps for cosmetic use. As a massage oil or hair oil, it has for ages been found irreplaceable by Japanese geishas.</p> <p>Content 250 ml</p> <p></p>

032.407

5/ 5

<p>Fragment</p> <p>A very fine grit sediment stone from the Kyoto region. Perfect for removing burr and polishing hand-forged plane blades, chisels and knife blades made of carbon steel. Ground flat on one side.</p> <p>Grit 10 000-15 000</p> <p>Dimensions 75-95 x 50-80 x 7-13 mm</p> <p></p>

032.360

5/ 5

<p>For de-burring the mirror side of chisels after sharpening. Self-adhesive. Fits No. 740830.</p> <p>M. Power Tools DC Diamond Stones</p> <p>Diamond Cross (DC) sharpening stones offer an excellent price/performance ratio with a high manufacturing quality. The lapping of the supporting plates and the stringent quality controls are performed at the company's headquarters in England.</p> <p>Monocrystalline* diamond particles guarantee a long service life and excellent material removal</p> <p>Uniform grit sizes and a dense diamond distribution for even grinding patterns</p> <p>Cross-shaped recesses prevent clogging due to grinding debris</p> <p>Permanently flat and warp-free thanks to specially lapped supporting plates made of steel with a stainless steel matrix</p> <p>3 year warranty for material and manufacturing defects! (damage from improper use is not covered by this warranty)</p> <p>Monocrystalline* diamond-coated sharpening devices:</p> <p>Diamond-coated sharpening devices remain permanently flat, and are especially suitable for tools with straight blades, as well as for producing flat surfaces (e.g. backs of plane and chisel blades, plane soles, scrapers). Also suitable for carbide coated cutters, tool steels, HSS and non-metal materials (glass, ceramic, etc.). We recommend moistening diamond-coated sharpening devices with water and grinding with little pressure.</p> <p>* Monocrystalline diamonds are significantly more wear resistant than the polycrystalline diamonds used to make lower quality diamond sharpening tools.</p> <p>Grit:  extra-fine</p> <p></p>

032.357

5/ 5

<p>As a supplement, this jig, which can be rotated in any direction, is designed for sharpening turning and profile gouges. The angle can be accurately adjusted using the hole matrix. Notches on the back indicate the set angle. Max. intake Ø 19 mm.</p> <p>The Oneway sharpening system was specially designed for woodturning tools but, with its two different jigs, is also suitable for chisels and plane blades as well as other tools. The arm is fitted to a double-wheeled grinder using a base system (fits all common models).</p> <p></p>

032.337

5/ 5

<p>Thanks to the wide flat rest with adjustable angle, this system is suitable for scrapers and parting tools as well as chisels and plane blades. Includes a left and right base with eccentric locking mechanism, arm rest and flat rest. Flat rest 126 x 76 mm.</p> <p>The Oneway sharpening system was specially designed for woodturning tools but, with its two different jigs, is also suitable for chisels and plane blades as well as other tools. The arm is fitted to a double-wheeled grinder using a base system (fits all common models).</p> <p></p>

032.336

5/ 5

<p>Machine including three waterstones (grits 280, 1000 and 6000).</p> <p>Shinko Sharpening Machine</p> <p>The Shinko sharpening system enables the achievement of professional sharpening results. Clogging rarely occurs with the open-pored Japanese waterstones. Water cooling and plane-honing produces long-lasting and strong edges. Because no heat is generated, the blade can be held very close to its edge and guided very accurately. No sparks are produced, allowing the device to be safely operated in workshops and instructional settings. The stone surrounding foam ring is easily pressed down when sharpening long blades.</p> <p>Sharpening wheel:</p> <p>Japanese waterstone, grit 1000, Ø 180 x Ø 70 mm, thickness 20 mm, steel mount, wheel nut, splashguard.</p> <p>Motor: 220 V, 125 W, 50/60 Hz, 450 rpm gear-driven.</p> <p>Casing: Plastic, tool rest adjustable in height and angle. Water container with valve, drain tube.</p> <p>Overall weight approx. 5.5 kg.</p> <p></p>

032.327

5/ 5

<p>This multifunctional deluxe set allows for the precise and easy sharpening of nearly all tool blades, whether they have straight or slightly rounded cutting edges, whether the blade width is 2 mm or 72 mm.</p> <p>The set includes:</p> <p>Standard clamping unit for cutting tool edges up to 72 mm width, also suited for blades with bevel or chamfered edges</p> <p>Double jaw clamp, suited for the narrowest chisels, mortise chisels or plane blades; the lateral clamping ensures precise perpendicular sharpening, especially for narrow blades with straight edges; max. blade width 38 mm</p> <p>Sharpening device with straight roller, suited for sharpening straight edges</p> <p>Sharpening device with barrel-shaped roller for sharpening and honing slight curves, e.g. for smoothing plane blades</p> <p>Setting gauge with fence for bevel angle 15°-54° (with double jaw honing device 15°-40°), counter chamfer 10°-20°</p> <p>The adjustable brass roller allows for increasing the angle of inclination by up to 2° when creating a micro bevel without unclamping the tool. Made of die-cast aluminium, easy-gliding brass roller.</p> <p></p> <p>Max. blade width 72 / 38 mm</p> <p>Max. blade thickness 12 mm</p> <p></p>

032.307

5/ 5

<p>This large mat is ideal for use as a non-slip pad while sharpening, but also for securing small timbers while hand-sawing or similar.</p> <p>Dimensions 300 x 300 mm</p> <p></p>

032.238

5/ 5

<p>Light mineral oil for Arkansas and other oil stones. Also suitable for lubrication purposes.</p> <p></p>

032.230

5/ 5

<p>Coarse corresponds to grit 220 and fine corresponds to grit 1000.</p> <p>The gentle, highly pure white aluminium oxideused for the manufacturing of this stone is much finer than the abrasives of other synthetic oilstones. Additionally the stone is highly effective and does not clog easily. Pre-soaked with oil in the factory, it comes ready for use.</p> <p>Grit fine/coarse</p> <p>Dimensions 203 x 51 x 25 mm</p> <p></p>

032.195

5/ 5

<p>Matsunaga is one of the largest manufacturers of sharpening stones in Japan. In the West, these stones are usually known as King stones or Sun Tiger stones. The stones of the King or Sun Tiger series have a relatively soft bond, which allows the abrasives to be continually exposed during use, making the stone highly effective. These stones are ideal for extremely hard, low-alloy carbon steels (White and Blue Paper Steel). Before use, soak the stones in water for at least 15 minutes. They can also be stored in water permanently. Green silicon carbide abrasive is used for 180 grit. For all other grits aluminium oxideis used.</p> <p>Grit 1000/6000</p> <p></p> <p>Small stone size : 150 x 50 x 25 mm</p> <p>Medium stone size : 205 x 50 x 25 mm</p> <p>Large stone size : 207 x 66 x 36 mm</p> <p></p>

032.043