Kunsuto Sharpening Stone Kunsuto Sharpening
  • Kunsuto Sharpening Stone Kunsuto Sharpening

Kunsuto Sharpening Stone

,
5/ 5
<p>"Abrasive white aluminium oxide.</p> <p>Stones with medium sized grit for sharpening blunt blades. Abrasive: #600 aluminium oxide; #1000 aluminium oxideand white aluminium oxide; #3000 white aluminium oxide.</p> <p>Kunsuto Sharpening Stone Series</p> <p>This stone series was developed in cooperation with a Japanese sharpening stone expert. The aim was to create a Japanese stone series suitable for both high-alloy tool steels and low-alloy carbon steels. The numerous tests were supported by microscopic images of the cutting edges after sharpening. This stone series has a medium-hard bond, which does not wear out quickly even with tool steels made of alloy components with a coarse grain structure (e.g. chromium and vanadium). However, both steel types allow good material removal with a pleasant ease of use. The microscopic images show a harmonious surface and a precise cutting edge form for both types of steel.</p> <p>Before use, soak the stone for at least 10 minutes. Do not keep it in water permanently.</p> <p></p> <p>Dimensions 205 x 78 x 25 mm</p> <p></p>
032.396
Kunsuto Sharpening Stone Kunsuto Sharpening
€31.89

By buying this product you can collect up to 63 point points. Your cart will total 63 points that can be converted into a voucher of €0.63.

Shipping in 7-10 days
Grit
Quantity

"Abrasive white aluminium oxide.

Stones with medium sized grit for sharpening blunt blades. Abrasive: #600 aluminium oxide; #1000 aluminium oxideand white aluminium oxide; #3000 white aluminium oxide.

Kunsuto Sharpening Stone Series

This stone series was developed in cooperation with a Japanese sharpening stone expert. The aim was to create a Japanese stone series suitable for both high-alloy tool steels and low-alloy carbon steels. The numerous tests were supported by microscopic images of the cutting edges after sharpening. This stone series has a medium-hard bond, which does not wear out quickly even with tool steels made of alloy components with a coarse grain structure (e.g. chromium and vanadium). However, both steel types allow good material removal with a pleasant ease of use. The microscopic images show a harmonious surface and a precise cutting edge form for both types of steel.

Before use, soak the stone for at least 10 minutes. Do not keep it in water permanently.

Dimensions 205 x 78 x 25 mm

032.396

16 other products in the same category: