TORMEK Square Edge Jig SE-77 Tormek Sharpening
  • TORMEK Square Edge Jig SE-77 Tormek Sharpening
  • TORMEK Square Edge Jig SE-77 Tormek Sharpening

TORMEK Square Edge Jig SE-77

,
5/ 5
<p>For plane blades and paring chisels. Also suitable for Japanese chisels. Slightly convex cutting shapes can also be sharpened using two setting wheels (included with T-8). With the se-77 square edge Jig, it is easy to sharpen your wood chisels and plane irons into a square corner. The design gives you the best conditions for a successful sharpening with the highest precision over the final result. The se-77 square edge Jig is an enhancement of the se‑76 Jig. It contains an adjustable side that can be set with the help of two smaller knobs, which allows fine tuning if needed. This can be required if the tool is not exactly square to the Stone, is very narrow or if the steel is slightly twisted. The setting for fine adjustment is done in seconds by loosening one of the smaller adjustment knobs and tightening the other. The safety stops keep the Jig securely on the Universal support and prevent the tool from sliding off the grindstone, so there is No Risk that you will hurt your fingers when sharpening. The Jig fits wood chisels and plane irons up to 77 mm (3") width.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p></p>
032.009
TORMEK Square Edge Jig SE-77 Tormek Sharpening
€55.57

By buying this product you can collect up to 111 point points.

Shipping in 3-4 days

For plane blades and paring chisels, fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 e T-8.

Quantity
Product in stock!

For plane blades and paring chisels. Also suitable for Japanese chisels. Slightly convex cutting shapes can also be sharpened using two setting wheels (included with T-8). With the se-77 square edge Jig, it is easy to sharpen your wood chisels and plane irons into a square corner. The design gives you the best conditions for a successful sharpening with the highest precision over the final result. The se-77 square edge Jig is an enhancement of the se‑76 Jig. It contains an adjustable side that can be set with the help of two smaller knobs, which allows fine tuning if needed. This can be required if the tool is not exactly square to the Stone, is very narrow or if the steel is slightly twisted. The setting for fine adjustment is done in seconds by loosening one of the smaller adjustment knobs and tightening the other. The safety stops keep the Jig securely on the Universal support and prevent the tool from sliding off the grindstone, so there is No Risk that you will hurt your fingers when sharpening. The Jig fits wood chisels and plane irons up to 77 mm (3") width.

Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.

032.009
2021-09-30
Grade 
Mike V
02/04/2021

worth the price

Follow instructions and it works well. A bit pricey but if you have to have someone else sharpen your tools it will save you money.

Grade 
Keith J
02/04/2021

Recommended

I have a Grizzly Sharpening Machine which is MUCH less expensive than the Tormek. With good reason too. The holder for the chisels and plane blades is just about worthless. BUT the Tormek replacement is awesome. Apparently all the Tormek attachments work on the Grizzly machine. Highly recommended!

Grade 
Dave P
02/04/2021

Awesome

Awesome. I can now repeatably grind a perfect camber in my plane irons. It also does a great job of adjusting for a straight and square grind

Write your review

TORMEK Square Edge Jig SE-77

For plane blades and paring chisels, fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 e T-8.

Write your review

You might also like

  • ,
    5/ 5
    <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">Aluminium oxide abrasive.</span></p> <p></p> <p><span lang="en-us" style="font-size:11pt;line-height:107%;font-family:Calibri, 'sans-serif';" xml:lang="en-us">Matsunaga is one of the largest manufacturers of sharpening stones in Japan. These stones are usually known as King stones or Sun Tiger stones. The stones of the King or Sun Tiger series have a relatively soft bond, which allows the abrasives to be constantly exposed during use, making the stone highly effective. These stones are especially suitable for extremely hard, low-alloy carbon steels (White and Blue Paper Steel). Before use, soak the stones in water for at least 15 minutes. They can also be stored in water permanently</span></p>
    032.001
    KING Japanese Sharpening Stone Trade King Mark Sharpening KING Japanese...
    Price €22.05
  • ,
    5/ 5
    <p><span style="color:#000000;"><span style="font-family:Lato, sans-serif;"><span style="font-size:medium;">The counterform “La Stabile” is a classic of our production. Born over 20 years ago from an idea of ​​a Cremonese luthier, it was then redesigned and implemented over time following the many tips of the luthiers who use it.</span></span></span></p> <p><span style="color:#000000;"><span style="font-family:Lato, sans-serif;"><span style="font-size:medium;">The basic idea of ​​this simple design is to keep the top or back of the violin tightly in the stops, without damaging the profile. Starting from this concept we have created a mechanics that pushes on the edges diagonally, and not sideways (like all other counterforms in the market) where the grain of the wood is fragile.</span></span></span></p> <p class="MsoNormal"></p> <p><span style="color:#000000;"><span style="font-family:Lato, sans-serif;"><span style="font-size:medium;">Solid Finnish birch plywood and other simple but high-quality materials are ideal to ensure that this indispensable tool remains strong and stable over decades, especially for luthiers who use it daily.</span></span></span></p> <p></p> <p><iframe width="250" height="250" src="https://www.youtube.com/embed/IQOg7u6L0xc" frameborder="0"></iframe></p>
    029.005
    La Stabile Grandi Liutai Italiani Accessories La Stabile
    Price €50.00

10 other products in the same category: