TORMEK Gouge Jig SVD-186 R Tormek Sharpening
  • TORMEK Gouge Jig SVD-186 R Tormek Sharpening
  • TORMEK Gouge Jig SVD-186 R Tormek Sharpening

TORMEK Gouge Jig SVD-186 R

,
5/ 5
<p>For hollow gouges and turning tools, as well as interchangeable cutters for hollowing tools etc., up to 36 mm wide. Adjustable in cutting angle and shape. With the SVD-186 R Gouge Jig, you will get an exact replication of both the shape and edge angle on your bowl gouges and spindle gouges, so you can be sure that the tool will behave in the same predictable way on the lathe after every sharpening. Used correctly and together with your Tormek tool sharpener, there is no alternative method that can give you faster or sharper results.</p> <p>The jig can be set for various lengths of the side bevel. Mount your cutter onto the special shaft that is included with the jig, and you get a controlled sharpening.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p></p>
032.008
TORMEK Gouge Jig SVD-186 R Tormek Sharpening
€70.00

By buying this product you can collect up to 140 point points.

For hollow gouges and turning tools, fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 e T-8.

Quantity
Contact us!


For hollow gouges and turning tools, as well as interchangeable cutters for hollowing tools etc., up to 36 mm wide. Adjustable in cutting angle and shape. With the SVD-186 R Gouge Jig, you will get an exact replication of both the shape and edge angle on your bowl gouges and spindle gouges, so you can be sure that the tool will behave in the same predictable way on the lathe after every sharpening. Used correctly and together with your Tormek tool sharpener, there is no alternative method that can give you faster or sharper results.

The jig can be set for various lengths of the side bevel. Mount your cutter onto the special shaft that is included with the jig, and you get a controlled sharpening.

Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.

032.008
2021-09-30
Grade 
Marco A.
02/04/2021

Ottimo prodotto

Ottimo prodotto, facile da utilizzare. Uniche pecche sono: il costo e la mancanza di istruzioni in Italiano.

Grade 
Tim H
02/04/2021

Highly recommended

Works and setup is easy, after a few sharping the profile on the tool is perfect, time after time. Awful pricey but as with the Tomek you get what you pay for! Highly recommended!

Grade 
Daniel S
02/04/2021

Works fine

I haven't purchased a new jig since I got the Tormek 25 yrs ago. I needed this to re-shape some chipped gouges. It works fine after the initial WTF set-up confusion.

Write your review

TORMEK Gouge Jig SVD-186 R

For hollow gouges and turning tools, fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 e T-8.

Write your review

You might also like

  • ,
    5/ 5
    <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">Aluminium oxide abrasive.</span></p> <p></p> <p><span lang="en-us" style="font-size:11pt;line-height:107%;font-family:Calibri, 'sans-serif';" xml:lang="en-us">Matsunaga is one of the largest manufacturers of sharpening stones in Japan. These stones are usually known as King stones or Sun Tiger stones. The stones of the King or Sun Tiger series have a relatively soft bond, which allows the abrasives to be constantly exposed during use, making the stone highly effective. These stones are especially suitable for extremely hard, low-alloy carbon steels (White and Blue Paper Steel). Before use, soak the stones in water for at least 15 minutes. They can also be stored in water permanently</span></p>
    032.001
    KING Japanese Sharpening Stone Trade King Mark Sharpening KING Japanese...
    Price €22.05
  • ,
    5/ 5
    <p><span style="color:#000000;"><span style="font-family:Lato, sans-serif;"><span style="font-size:medium;">The counterform “La Stabile” is a classic of our production. Born over 20 years ago from an idea of ​​a Cremonese luthier, it was then redesigned and implemented over time following the many tips of the luthiers who use it.</span></span></span></p> <p><span style="color:#000000;"><span style="font-family:Lato, sans-serif;"><span style="font-size:medium;">The basic idea of ​​this simple design is to keep the top or back of the violin tightly in the stops, without damaging the profile. Starting from this concept we have created a mechanics that pushes on the edges diagonally, and not sideways (like all other counterforms in the market) where the grain of the wood is fragile.</span></span></span></p> <p class="MsoNormal"></p> <p><span style="color:#000000;"><span style="font-family:Lato, sans-serif;"><span style="font-size:medium;">Solid Finnish birch plywood and other simple but high-quality materials are ideal to ensure that this indispensable tool remains strong and stable over decades, especially for luthiers who use it daily.</span></span></span></p> <p></p> <p><iframe width="250" height="250" src="https://www.youtube.com/embed/IQOg7u6L0xc" frameborder="0"></iframe></p>
    029.005
    La Stabile Grandi Liutai Italiani Accessories La Stabile
    Price €50.00

10 other products in the same category: