Sharpening Accessories

Active filters

  • ,
    5/ 5
    <p>Synthetic Nagura stone. Ideal for sharpening stones with a grit of 400/1000/3000/8000 or lower.</p> <p>The Nagura is an optional stone that creates slurry on the sharpening stone. A Nagura ensures that the abrasive particles in the sharpening stone are released more easily and can also be used to give a coarser sharpening stone a finer finish. However, a Nagura not only produces slurry, it is also ideal for use after sharpening, as it is very good for cleaning the stone and removing metal particles that can stick to the sharpening stone and rust. Naniwa's synthetic Naguras are made from aluminium oxide.</p> <p>The stones should be briefly immersed in water before use, but not constantly stored in water.</p> <p>Generally suitable for all waterstones.</p> <p>Dimensions 62 x 33 x 20 mm</p> <p></p>
    032.222
    Naniwa Nagura Stone Nagura Sharpening

    Naniwa Nagura Stone

    €13.03
  • ,
    5/ 5
    <p>MADE OF THE FINEST STEEL IN GERMANY</p> <p></p> <p>This burnisher is of the finest German quality with a natural Oak handle, steel ferrule and a properly hardened and tempered steel blade. Overall length of tool is 245mm Blade diameter: 10 mm</p> <p>Blade length: 133 mm</p> <p>Overall length: 245 mm</p>
    027.023
    Round Burnisher KUNZ KUNZ Scraper Blades

    Round Burnisher KUNZ

    €27.79
  • ,
    5/ 5
    <p>This sharpener kit was made by DMT specially for woodturners and sculptors. It consists of two diamond-sharpening cones Ø 9.5-19.3 mm and Ø 19.3-31.8 mm as well as a cone file Ø 3.3-9.5 mm for interior rounding. In addition, it also includes a Dia Sharp sharpening card for exterior rounding and narrow in-between spaces. Comes with a practical nylon sheath with a hanging loop.</p> <p>DMT Diamond Stones</p> <p>The American manufacturer Diamond Machining Technology (DMT) is the founder of interrupted surface technology for diamond sharpening stones, and has been the market leader for diamond-coated sharpening equipment for years. The high-quality sharpening tools are manufactured at the company's headquarters in Massachusetts (USA).</p> <p>Monocrystalline* diamond particles guarantee a long service life and excellent material removal</p> <p>Uniform grit sizes and a dense diamond distribution for even grinding patterns</p> <p>Round recesses prevent clogging due to grinding debris</p> <p>Permanently flat and warp-free thanks to supporting plates made of steel or warp-free plastic with a nickel matrix</p> <p>Colour coding of various grit sizes</p> <p>100 % made in the USA</p> <p>Monocrystalline* diamond-coated sharpening devices:</p> <p>Diamond-coated sharpening devices remain permanently flat, and are especially suitable for tools with straight blades, as well as for producing flat surfaces (e.g. backs of plane and chisel blades, plane soles, scrapers). Also suitable for carbide coated cutters, tool steels, HSS and non-metal materials (glass, ceramic, etc.). We recommend moistening diamond-coated sharpening devices with water and grinding with little pressure.</p> <p>* Monocrystalline diamonds are significantly more wear resistant than the polycrystalline diamonds used to make lower quality diamond sharpening tools.</p> <p></p>
    032.401
    DMT Sharpener Kit DMT Sharpening

    DMT Sharpener Kit

    €115.49
  • ,
    5/ 5
    <p>In addition to stropping, regularly used straight razors should be honed on a sharpening stone every two months. For this purpose, this set contains two King sharpening stones 800 grit and 1200 grit, as well as a King 8000-grit honing stone. The stones rest securely on the Non-skid mat and can be conveniently trued on the trueing grille. The wide hanging strop and the Thiers-Issard sharpening paste No. 709019 are ideal for daily stropping</p> <p></p>
    032.398
    Sharpening Set for Straight Razors GL Sharpening

    Sharpening Set for...

    €147.46
  • ,
    5/ 5
    <p>For repairing nicks, this set contains a King 220 grit coarse shaping stone. The King 1000/6000 grit combination stone rests securely on the non-skid mat and is used for both sharpening and honing. The set also contains a trueing grille for sharpening stones and a Togeru sharpening device which helps maintain the correct angle when sharpening knives.</p> <p></p>
    032.397
    Sharpening Set for Knives of Low-alloy Carbon Steel "Blue and White Paper Steel" GL Sharpening

    Sharpening Set for...

    €91.72
  • ,
    5/ 5
    <p>This set contains a Kunsuto 220 grit shaping stone for repairing nicks and a Kunsuto 1000/6000 grit combination stone for sharpening and honing. Use the trueing grille for trueing the stones, the non-skid mat keeps the stones in place. Also included is a Togeru sharpening device, which helps maintain the correct angle when sharpening knives.</p> <p></p>
    032.388
    Sharpening Set for Knives of High-alloy Steels VG-10, PM Steels, 440 C, SKD 11 GL Sharpening

    Sharpening Set for...

    €96.64
  • ,
    5/ 5
    <p>This multifunctional deluxe set allows for the precise and easy sharpening of nearly all tool blades, whether they have straight or slightly rounded cutting edges, whether the blade width is 2 mm or 72 mm.</p> <p>The set includes:</p> <p>Standard clamping unit for cutting tool edges up to 72 mm width, also suited for blades with bevel or chamfered edges</p> <p>Double jaw clamp, suited for the narrowest chisels, mortise chisels or plane blades; the lateral clamping ensures precise perpendicular sharpening, especially for narrow blades with straight edges; max. blade width 38 mm</p> <p>Sharpening device with straight roller, suited for sharpening straight edges</p> <p>Sharpening device with barrel-shaped roller for sharpening and honing slight curves, e.g. for smoothing plane blades</p> <p>Setting gauge with fence for bevel angle 15°-54° (with double jaw honing device 15°-40°), counter chamfer 10°-20°</p> <p>The adjustable brass roller allows for increasing the angle of inclination by up to 2° when creating a micro bevel without unclamping the tool. Made of die-cast aluminium, easy-gliding brass roller.</p> <p></p> <p>Max. blade width 72 / 38 mm</p> <p>Max. blade thickness 12 mm</p> <p></p>
    032.307
    Veritas Deluxe Honing Guide System II, 5-Piece Set Veritas Sharpening

    Veritas Deluxe Honing...

    €119.59
  • ,
    5/ 5
    <p>Convert your standard Veritas Sharpening System II into a self-centring double jaw honing guide. Simply replace the standard clamping unit by the double jaw clamp and you're done! The double jaw honing device allows for the precise and easy sharpening of even the narrowest chisels, mortise chisels or plane blades while exactly maintaining an angle of 90°. Also suitable for short Japanese blades. Fits Veritas Sharpening System II and Camber Roller Assembly </p> <p>Max. blade width 38 mm</p> <p>Max. blade thickness 12 mm</p> <p></p>
    032.306
    Veritas Narrow Blade Clamp for Veritas Sharpening System II Veritas Sharpening

    Veritas Narrow Blade...

    €48.77
  • ,
    5/ 5
    <p>The wide roller preserves the surface of the stone and prevents tilting. Can be used as an angle jig with grinding machines which have a tool rest. Aluminium body with brass roller.</p> <p>Max. blade width 65 mm</p> <p>Max. blade thickness 10 mm</p> <p></p>
    032.305
    Universal Honing Guide GL Sharpening

    Universal Honing Guide

    €15.49
  • ,
    5/ 5
    <p>These wax-like polishing pastes are applied to felt buffing wheels and smooth leather sides of strops. Only for steel/stainless steel.</p> <p></p>
    032.299
    Polishing Paste GL Sharpening

    Polishing Paste

    €3.69
  • ,
    5/ 5
    <p>This mount enables easier sharpening of short blades such as spokeshaves, reversing blades or small violin planes. Two magnets and a moveable fence hold the blades securely, the die-cast aluminium handle extends the blade and enables controlled sharpening, either by hand or with the Veritas sharpening system I. 102 x 38 x 10 mm.</p> <p></p>
    032.296
    Veritas Sharpening Device, for Small Plane Blades Veritas Sharpening

    Veritas Sharpening...

    €17.95
  • ,
    5/ 5
    <p>These strops can be used with or without paste to polish tool blades. If necessary, you can use finishing paste on the black (rougher) side; the fine brown side is usually used for stropping without paste. Can be held by the handle or screwed to a worktop through the two holes.</p> <p>Dimensions 415 x 75 x 18 mm</p> <p></p>
    032.294
    Paddle Strop De Luxe, Two-sided GL Sharpening

    Paddle Strop De Luxe,...

    €30.16