Japanese Coping Saw

5/ 5

<p>Ideal for precise curves and recesses.</p> <p>Compass Saws</p> <p>With long, slender Japanese blades for making holes and curved cuts and working in confined spaces. Also suitable for thicker branches or trimming bonsai.</p> <p>Blade length 180 mm</p> <p>Overall length 310 mm</p> <p>Blade width 6-14 mm</p> <p>Blade thickness 1.0 mm</p> <p>Setting 1.3 mm</p> <p>Universal teeth 3.4 mm</p>

020.344

5/ 5

<p><strong>For cuts across the grain.</strong></p> <p>Kataba saws</p> <p>Because of their thicker blades, the backless Kataba saws are very robust and allow deep cuts flush to the surface. They are available with different blade lengths and tooth spacings and are thus highly versatile in cabinetmaking and carpentry.</p> <p>Blade length 265 mm</p> <p>Overall length 600 mm</p> <p>Blade width 60 mm</p> <p>Blade thickness 0.6 mm</p> <p>Setting 0.9 mm</p> <p>Crosscut teeth 1.7 mm</p>

020.375

5/ 5

<p>Diamond-shaped precision files for sharpening Japanese saw blades without tip-hardened teeth (Deluxe saws with full-hardened, non-exchangeable blades). Single cut.</p> <p>Cut fine</p> <p>Cut length 100 mm</p> <p>Cross section 3 mm</p> <p>Width 20 mm</p>

020.353

5/ 5

<p>This 3-piece set is a must for every tool bag  Set consists of the following articles:</p> <p></p> <p>DICTUM Dozuki Universal Compact 180, Traditional Grip</p> <p>DICTUM Kataba Super Hard Compact 180, Traditional Grip</p> <p>DICTUM Ryoba Compact 180, Traditional Grip</p> <p>DICTUM Jute Tool Roll for Japanese Saws, Size 1</p> <p></p> <p></p>

020.323

5/ 5

<p>The diamond particles embedded in the blade allow this saw to be used for cutting the hardest materials like steel, stone, ceramic, or glass in any direction.</p> <p></p>

020.328

5/ 5

<p>European cowhide, rivet-reinforced seams, slide-in tongue with hang-up hole.</p> <p>Model Size 1</p> <p>Blade length 150-180 mm</p>

020.310

5/ 5

<p>Professional Kugihiki with flexible blade. Traditional design with wooden handle wrapped in rattan.</p> <p>Flush Cutting Saws</p> <p>Japanese flush cutting saws are ideal for cutting dowels, pegs, tenons etc. flush to the surface of the piece without damaging its surface. Flexible blades with un-set teeth, limited cutting depth.</p> <p>Blade length 180 mm</p> <p>Overall length 355 mm</p> <p>Blade width 35 mm</p> <p>Blade thickness 0.5 mm</p> <p>Crosscut teeth 1.4 mm</p>

020.371

5/ 5

<p>Small saw that cuts on the pull stroke for fine detail work in model-building, musical instrument making and restoration work. Unset saw blade with reinforced back.</p> <p>Blade length 165 mm</p> <p>Overall length 290 mm</p> <p>Cut depth 30 mm</p> <p>Blade thickness 0.3 mm</p> <p>Triangular teeth for crosscuts 0.9 mm</p>

020.364

5/ 5

<p>For mobile use or maximum control in detail cuts across and along the grain. Two handle versions available:</p> <p>Light and breathable traditional wooden handle, wrapped in rattan</p> <p>Very robust and slip-proof rubberised Power Grip</p> <p>Ryoba Saws</p> <p>With its two different tooth patterns, the Ryoba saw ensures optimum cutting performance not only across but also along the grain, making it the most versatile saw for carpentry and joinery. The thicker saw blade allows backless control and thus cuts of any depth flush to the surface. Because the teeth become successively finer from the tip to the tang, it is easy to start a cut and less force is required as the stroke progresses.</p> <p>Features of an original DICTUM Japanese saw - made in Japan!</p> <p>Rust protection and reduced friction</p> <p>thanks to cutting edge surface plating technology (inexpensive saws are usually only lacquered, leading to increased friction in the saw kerf!)</p> <p>Backlash-free saw blade guidance</p> <p>for excellent cutting precision</p> <p>Stainless steel blade holder</p> <p>rust protection, no varnish and increased bending stiffness of the back of the blade</p> <p>Individually impulse-hardened tooth tips</p> <p>for equal hardness of all teeth and thus long-lasting sharpness</p> <p>Perfect deburring of the teeth</p> <p>for reduced sawing forces</p> <p>Uniform set of saw teeth and absolutely straight teeth</p> <p>for drift-free sawing.</p> <p>Blade length 180 mm</p> <p>Overall length 395 mm</p> <p>Blade width 60 mm</p> <p>Handle version Traditional Grip</p> <p>Blade thickness 0.5 mm</p> <p>Setting 0.8 mm</p> <p>Crosscut teeth 1.5 mm</p> <p>Rip teeth 2.7-3.7 mm</p>

020.378

5/ 5

<p>The diamond particles embedded in the blade allow this saw to be used for cutting the hardest materials like steel, stone, ceramic, or glass in any direction. Comes with one diamond saw blade Ø 1.6 mm and one conventional blade Ø 1 mm.</p> <p>Freeway</p> <p>Robust steel frames for high torsion resistance</p> <p>Saw blade easy to hook into the sockets</p> <p>Blade tightened and released by turning the handle</p> <p>Blade length 165 mm</p> <p>Jaw depth 120 mm</p> <p>Weight 190 g</p> <p></p>

020.327

5/ 5

<p>The particularly fine trapezoidal teeth of this universal saw allow extremely clean cuts across the grain, the rip teeth are designed for a good cutting performance along the grain. Three handle versions available:</p> <p>Light and breathable traditional wooden handle, wrapped in rattan</p> <p>Oiled, anti-skid Wave Grip made of native alder wood</p> <p>Very robust and slip-proof rubberised Power Grip</p> <p>Ryoba Saws</p> <p>With its two different tooth patterns, the Ryoba saw ensures optimum cutting performance not only across but also along the grain, making it the most versatile saw for carpentry and joinery. The thicker saw blade allows backless control and thus cuts of any depth flush to the surface. Because the teeth become successively finer from the tip to the tang, it is easy to start a cut and less force is required as the stroke progresses.</p> <p>Features of an original DICTUM Japanese saw - made in Japan!</p> <p>Rust protection and reduced friction</p> <p>thanks to cutting edge surface plating technology (inexpensive saws are usually only lacquered, leading to increased friction in the saw kerf!)</p> <p>Backlash-free saw blade guidance</p> <p>for excellent cutting precision</p> <p>Stainless steel blade holder</p> <p>rust protection, no varnish and increased bending stiffness of the back of the blade</p> <p>Individually impulse-hardened tooth tips</p> <p>for equal hardness of all teeth and thus long-lasting sharpness</p> <p>Perfect deburring of the teeth</p> <p>for reduced sawing forces</p> <p>Uniform set of saw teeth and absolutely straight teeth</p> <p>for drift-free sawing.</p> <p> </p> <p>Blade length 240 mm</p> <p>Overall length 580 mm</p> <p>Blade width 84 mm</p> <p>Handle version Power Grip</p> <p>Blade thickness 0.45 mm</p> <p>Setting 0.7 mm</p> <p>Crosscut teeth 1.3 mm</p> <p>Rip teeth 2.4-3.8 mm</p> <p></p>

020.315

5/ 5

<p>Extra-long saw blade for extra-wide workpieces.</p> <p>Dozuki Super Hard</p> <p>Preferred for cuts across the grain (trimming and shoulder cuts) in exotic hardwood, as well as glued wood and particle boards.</p> <p>Wear-resistant teeth, even in hardwood (exotic woods), glued joints and synthetic resins</p> <p>Curved tip also allows mid-panel cuts</p> <p>Features of an original DICTUM Japanese saw - made in Japan!</p> <p>Rust protection and reduced friction</p> <p>thanks to cutting edge surface plating technology (inexpensive saws are usually only lacquered, leading to increased friction in the saw kerf!)</p> <p>Backlash-free saw blade guidance</p> <p>for excellent cutting precision</p> <p>Stainless steel blade holder</p> <p>rust protection, no varnish and increased bending stiffness of the back of the blade</p> <p>Individually impulse-hardened tooth tips</p> <p>for equal hardness of all teeth and thus long-lasting sharpness</p> <p>Perfect deburring of the teeth</p> <p>for reduced sawing forces</p> <p>Uniform set of saw teeth and absolutely straight teeth</p> <p>for drift-free sawing.</p> <p> </p> <p>Blade length 270 mm</p> <p>Overall length 590 mm</p> <p>Cut depth 65 mm</p> <p>Blade thickness 0.3 mm</p> <p>Setting 0.45 mm</p> <p>Crosscut teeth 1.5 mm</p>

020.306

5/ 5

<p>Four compartments, natural colour.</p> <p>Model Size 2</p> <p>Blade width max. 90 mm</p> <p>Outer dimensions 600 x 600 mm</p> <p></p>

020.308

5/ 5

<p>Triangular files with round edges for sharpening European-style saws. The round edges maintain the slightly rounded gullet between the saw’s teeth and thus prevent cracks between the teeth (sharp angles crack more easily than curved transitions).</p> <p>Cut 2</p> <p>Cut length 200 mm</p> <p>Width 12 mm</p>

020.362

5/ 5

<p>Blade for the Handiwork Japanese saw (code 020.002) for all fine wood cuts in violinmaking and hobby work. For cuts across the grain. This product is a “Pull Saw.” What most people are used to are European saws, which cut materials via pushing, thus are called “push saws.” On the other hand, Japanese saws cut materials via pulling and thus are called “pull saws,” which is what this product is. In comparison to “push saws,” “pull saws” are lighter in weight, requires less power, and the resulting edge is cleaner. Blade length 150 mm. Cut depth 32 mm. Blade thickness 0.4 mm. Crosscut teeth 1.3 mm</p>

020.006

5/ 5

<p>Diamond-shaped precision files for sharpening Japanese saw blades without tip-hardened teeth (Deluxe saws with full-hardened, non-exchangeable blades). Single cut.</p> <p>Cut Very Fine</p> <p>Cut length 75 mm</p> <p>Cross section 2.5 mm</p> <p>Width 17 mm</p>

020.352