Planes

Active filters

  • ,
    5/ 5
    <p>Three Japanese products selected to help keep sharp tools and many other precision tools in top condition. The kit consists of a fine quality rubberized abrasive block, 240ml of Camellia oil and a special oil applicator. </p> <p>Pressed from the seeds of the Camellia tree, this light fragrant oil has been used in far eastern cultures for centuries. This Japanese Camellia Oil is food safe, non-toxic and acid free, making it perfect for protecting hand tools, machine tool beds, kitchen knives and firearms from corrosion. As a finishing oil it is quickly absorbed and will protect your work from ultraviolet light. Camellia oil is non hardening, so it will not provide impact protection, however a light coat will accentuate the grain and enable the surface to take a higher polish. It mixes well with other oils, and even a small amount will significantly improve their ability to penetrate.</p> <p></p>
    029.023
    Tool Care & Maintenance Kit for Planes and Other Fine Tools

    Tool Care &...

    €32.70

    Three Japanese products selected to help keep sharp tools and many other precision tools in top condition.

  • ,
    5/ 5
    <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">The Herdim planes have been developed together with violin makers. Materials and its function are under constant improvement process.</span></p><p></p> <p><span lang="en-us" style="font-size:11pt;line-height:107%;font-family:Calibri, 'sans-serif';" xml:lang="en-us">Slight side faces to work close to the edge, thick sole, which can be worked if required. Brass body and high quality HSS blade, hardened to approx. </span><span style="font-size:11pt;line-height:107%;font-family:Calibri, 'sans-serif';">60 HRC.</span></p>
    023.004
    HERDIM Plane with Screw Cap, Arched Sole

    HERDIM Plane with...

    €31.07
  • ,
    5/ 5
    <p>Blade width 32 mm, blade thickness 3.2 mm, overall length 135 mm, weight 425 g, blade angle 12 °.</p> <p>For fine cuts and end grain. Bevel angle 25°. Results in a cutting angle of 37°.</p> <p>It has handy precision planes with polished cap irons made from bronze. The stainless steel adjuster allows accurate adjustment of the thick blades with minimum backlash.</p> <p></p>
    023.002
    LIE-NIELSEN Block Plane no. 102 - Cutting Angle 12 °

    LIE-NIELSEN Block...

    €110.57

    One of the favourite tools for many lutherie works, where a certain precision and speed is needed.

  • ,
    5/ 5
    <p>blade width 60 mm, blade thickness 3.6 mm, overall length 450 mm, weight 3.3 kg, blade angle 45 °.</p> <p>The all-purpose woodworking plane. With its Bedrock design, this plane allows chatter-free cutting thanks to its fully supported blade and a mouth that can be adjusted without removing cap iron and blade. Additional lateral blade adjustment and the low blade-feed adjuster allow the cutting depth to be changed during planing. Its heavy weight makes irregular grain or difficult woods easier to work. Bronze frog and cap.</p> <p></p>
    023.003
    LIE-NIELSEN Fore Plane no. 6 - Cutting Angle 45°

    LIE-NIELSEN Fore Plane...

    €356.48

    The plane preferred by luthiers for flattening and joints of violin, viola and cello.

  • ,
    5/ 5
    <p>Blade width 35 mm, blade thickness 3.2 mm, overall length 135 mm, weight 700 g, plane body: Bronze </p> <p>For working thin or small pieces made of hardwood such as fly rods, violin bows, frames. Hardened blade with 45° bevel to reduce material displacement. Adjustable blade angle (75-100°).</p> <p></p>
    023.001
    LIE-NIELSEN Scraping Plane no. 212

    LIE-NIELSEN Scraping...

    €171.72

    For working difficult elements like flamed maple ribs

  • ,
    5/ 5
    023.007
    Toothed Blade for HERDIM Plane - Blade Width 10 mm

    Toothed Blade for...

    €10.57
  • ,
    5/ 5
    <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">This version of the low-angle block plane is about a third the size of the original Veritas block plane.</span></p><p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us"> </span></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">At just under 64 mm (2-1/2 inch) long and 19 mm (3/4 inch) wide, it is a useful size for small-scale work or where a larger plane would be difficult to use. The low 12° bed angle combined with the 25° blade bevel gives it a cutting angle of 37°, making it also suitable for end-grain use.</span></p><p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us"> </span></p> <p><span lang="en-us" style="font-size:11pt;line-height:107%;font-family:Calibri, 'sans-serif';" xml:lang="en-us">The stainless-steel Norris-style adjuster lets you set the 12.7 mm (1/2 inch) wide A2 blade (1.5 mm thick) with precision. The body is made from investment-cast stainless steel, and has a fixed mouth, machined sides and a ground sole. Weighs 50 g (1.7 oz).</span></p>
    023.008
    VERITAS Miniature Block Plane - Blade 12,7 mm

    VERITAS Miniature...

    €43.36