Clamps

Active filters

  • ,
    5/ 5
    <p>Perfect clamp for gluing the fingerboard to the neck of violins, violas and cellos. The nylon strap wraps around the fingerboard and neck without leaving any marks! Perfect for one person use.</p> <p>Maximum tightening force: 100 kilograms (220lbs)</p> <p>Breaking strain: 100 kilograms (220lbs)</p> <p>Temperature range: -20oC to 100oC</p> <p>This clip can be used at temperatures of up to 150oC but between 100oC – 150oC there is a reduction in tensile strength.</p>
    030.013
    Multiclip Nylon Clamp  Clamps

    Multiclip Nylon Clamp

    €3.03

    Perfect clamp for gluing the fingerboard to the neck of violins

  • ,
    5/ 5
    <p>Due to the U-shaped hollow section, they are sturdy and stay straight even under high tension. The movable expansion chuck has a spring claw which clicks into the carved runner (15 mm spacing). The quick adjustment ensures a save grip and one-handed use. Headpieces and spindle made of aluminium.</p> <p>Bar cross-section 22 x 35 mm</p> <p>Clamping force up to 5000 N.</p> <p></p>
    030.006
    DUBUQUE Aluminium Bar Clamp Dubuque Clamps

    DUBUQUE Aluminium Bar...

    €28.61

    Due to the U-shaped hollow section, they are sturdy and stay straight even under high tension

  • ,
    5/ 5
    030.001
    Solid Steel Bar Clamps - 6 Inches Grandi Liutai Italiani Clamps

    Solid Steel Bar Clamps...

    €13.03
  • ,
    5/ 5
    <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">Low weight, torsion-resistant clamps made of hammer-finished, cast aluminium. Offset base, steel screw and ball-jointed swivel pad.</span></p> <p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">Jaw depth 85 mm </span></p> <p></p> <p><span lang="en-us" style="font-size:11pt;line-height:107%;font-family:Calibri, sans-serif;" xml:lang="en-us">Jaw opening 35 mm</span></p>
    030.002
    Aluminum Bassbar Clamp - Jaw Depth 85 mm - Herdim Clamps

    Aluminum Bassbar Clamp...

    €20.41
  • ,
    5/ 5
    030.026
    Set of HERDIM Assembly Clamps - 42 pcs Herdim Clamps

    Set of HERDIM Assembly...

    €327.79
  • ,
    5/ 5
    <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">Low weight, torsion-resistant clamps made of hammer-finished, cast aluminium. Offset base, steel screw and ball-jointed swivel pad.</span></p> <p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">Jaw depth 160 mm </span></p> <p></p> <p><span lang="en-us" style="font-size:11pt;line-height:107%;font-family:Calibri, sans-serif;" xml:lang="en-us">Jaw opening 40 mm</span></p>
    030.003
    Aluminum Bassbar Clamp - Jaw Depth 160 mm Grandi Liutai Italiani Clamps

    Aluminum Bassbar Clamp...

    €23.69
  • ,
    5/ 5
    <p>Clamps made of aluminium, very smooth-running and precise.</p> <p>Instrument Cello, Bass</p> <p>Jaw depth 20 mm</p> <p>Jaw opening 9 mm</p> <p></p>
    030.216
    CAG Clamps for Linings and Edges, Cello, Bass Cag Clamps

    CAG Clamps for Linings...

    €5.41

    Clamps made of aluminium, very smooth-running and precise

  • ,
    5/ 5
    <p>Clamps made of aluminium, very smooth-running and precise.</p> <p>Instrument Violin, Viola</p> <p>Jaw depth 12 mm</p> <p>Jaw opening 8 mm</p> <p></p>
    030.215
    CAG Clamps for Linings and Edges, Violin, Viola Cag Clamps

    CAG Clamps for Linings...

    €4.26

    Clamps made of aluminium, very smooth-running and precise

  • ,
    5/ 5
    <p>These chrome-plated bar clamps can exert light to medium pressure. These clamps feature holes drilled at intervals into the back of the bar to accept the point of the thumbscrew rod, allowing the clamps to be used a higher pressures without worrying that the arm might slide. Not only for glue-up, these clamps give good service as well for marking and sawing multiple boards at the same time.</p> <p></p>
    030.209
    Hatagane - Japanese Bar Clamps in Steel Hattori Clamps

    Hatagane - Japanese...

    €15.49

    These chrome-plated bar clamps can exert light to medium pressure

  • ,
    5/ 5
    <p>Japanese bar clamps are not designed to develop a lot of pressure, so they can be lightly constructed with eye-pleasing lines. They are well suited, especially the smaller clamps in solid brass, to work on display, or anywhere the use of such elegant tools will be appreciated (even if only by you!). The delicate tools allow finely-fitted small and delicate work pieces to be clamped for fitting and glueing. The clamping depth is limited, so the workpiece normally lies directly on the polished bars, allowing precise clamping while making it less likely the piece will slip out of alignment.</p> <p>These delicate clamps allow finely-fitted small and delicate work pieces to be clamped for fitting and glueing. Length of these brass clamps is approx. 25 mm more than the clamping capacity.</p> <p></p>
    030.204
    Hatagane - Japanese Bar Clamps in Brass Hatagane Clamps

    Hatagane - Japanese...

    €7.30

    These delicate clamps allow finely-fitted small and delicate work pieces to be clamped for fitting and glueing

  • ,
    5/ 5
    <p>TheMitre fittings are simply slotted onto the bars of the clamps. The self-adjusting fittings are usable for different sizes of framework and different mitre angles. The joint is not covered during clamping and can be inspected from all sides for careful alignment and adjusting. The price for a pair!</p> <p></p>
    030.203
    Mitre Fittings for KLEMMSIA clamps Klemmsia Clamps

    Mitre Fittings for...

    €8.11

    TheMitre fittings are simply slotted onto the bars of the clamps

  • ,
    5/ 5
    <p>Size 30 x 23 x 2.5 mm</p> <p></p>
    030.202
    Repl. Cork Pads, 10 Pieces for KLEMMSIA clamps Klemmsia Clamps

    Repl. Cork Pads, 10...

    €2.38

    Size 30 x 23 x 2.5 mm