List of products by brand Tormek

  • ,
    5/ 5
    <p>For hollow gouges and turning tools, as well as interchangeable cutters for hollowing tools etc., up to 36 mm wide. Adjustable in cutting angle and shape. With the SVD-186 R Gouge Jig, you will get an exact replication of both the shape and edge angle on your bowl gouges and spindle gouges, so you can be sure that the tool will behave in the same predictable way on the lathe after every sharpening. Used correctly and together with your Tormek tool sharpener, there is no alternative method that can give you faster or sharper results.</p> <p>The jig can be set for various lengths of the side bevel. Mount your cutter onto the special shaft that is included with the jig, and you get a controlled sharpening.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p></p>
    032.008
    TORMEK Gouge Jig SVD-186 R

    TORMEK Gouge Jig...

    €70.00

    For hollow gouges and turning tools, fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 e T-8.

  • ,
    5/ 5
    <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">For honing and polishing the inside of turning tools, gouges and V-shaped tools, interchangeable wheels.</span></p> <p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</span></p> <p></p>
    032.006
    Tormek Profiled Leather Honing Wheel LA-120

    Tormek Profiled...

    €45.00
  • ,
    5/ 5
    <p>For plane blades and paring chisels. Also suitable for Japanese chisels. Slightly convex cutting shapes can also be sharpened using two setting wheels (included with T-8). With the se-77 square edge Jig, it is easy to sharpen your wood chisels and plane irons into a square corner. The design gives you the best conditions for a successful sharpening with the highest precision over the final result. The se-77 square edge Jig is an enhancement of the se‑76 Jig. It contains an adjustable side that can be set with the help of two smaller knobs, which allows fine tuning if needed. This can be required if the tool is not exactly square to the Stone, is very narrow or if the steel is slightly twisted. The setting for fine adjustment is done in seconds by loosening one of the smaller adjustment knobs and tightening the other. The safety stops keep the Jig securely on the Universal support and prevent the tool from sliding off the grindstone, so there is No Risk that you will hurt your fingers when sharpening. The Jig fits wood chisels and plane irons up to 77 mm (3") width.</p> <p>Fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 and T-8.</p> <p></p>
    032.009
    TORMEK Square Edge Jig SE-77

    TORMEK Square Edge Jig...

    €55.57

    For plane blades and paring chisels, fits Tormek models 2000-2006, 1200-1206, T-3, T-4, T-7 e T-8.

  • ,
    5/ 5
    <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">Ultimate precision, solid zinc-cast top</span></p><p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">The TORMEK T-4, an advanced version of the T-3 model, takes precision and stability to a new level. Both the vertical and horizontal bases for the universal support and the integrated carrying handle are made in the same zinc casting and therefore permanently joined together. The motor and main shaft are fixed to the cast top, resulting in a solid construction which significantly improves accuracy during sharpening.</span></p><p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">»Tormek Original« sharpening wheel, grit 220, Ø 200 x 40 mm; leather honing wheel Ø 145 x 26 mm; solid zinc casting top with universal support with fine adjustment (horizontal and vertical settings). Impact-resistant ABS plastic housing. 230 V, 120 W, 120 rpm, 8 kg.</span></p><p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us"> </span></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">Includes:</span></p><p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">Stone grader (SP-650)</span></p><p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">Pro Angle Master (WM-200)</span></p><p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">Honing compound (PA-70)</span></p><p></p> <p class="MsoNormal"><span lang="en-us" xml:lang="en-us">Handbook (HB-10)</span></p><p></p> <p><span lang="en-us" style="font-size:11pt;line-height:107%;font-family:Calibri, 'sans-serif';" xml:lang="en-us">Instruction video (DVD-1)</span></p>
    032.007
    TORMEK T-4

    TORMEK T-4

    €319.26